Konica Minolta AccurioPress 6272P Plockmatic SD-350/SD-500 System Operator Man
Konica Minolta AccurioPress 6272P Manual
View all Konica Minolta AccurioPress 6272P manuals
Add to My Manuals
Save this manual to your list of manuals |
Konica Minolta AccurioPress 6272P manual content summary:
- Konica Minolta AccurioPress 6272P | Plockmatic SD-350/SD-500 System Operator Man - Page 1
Plockmatic SD-350/500 Production Booklet Maker Operator Manual Read this manual carefully before you use this product and keep it handy for future reference. For safety, please follow the instructions in this manual. Doc no: X04106D_EN Date: 14 October 2016 - Konica Minolta AccurioPress 6272P | Plockmatic SD-350/SD-500 System Operator Man - Page 2
WARNING This is a Class A product. In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures. The product (System) which is connected to this machine will be class A. NOTE: The domestic environment is an environment where the - Konica Minolta AccurioPress 6272P | Plockmatic SD-350/SD-500 System Operator Man - Page 3
related to USER SAFETY and PREVENTING EQUIPMENT PROBLEMS. How to read this manual Notation conventions Whenever necessary, the following points for attention are indicated in this manual. WARNING Indicates a potentially hazardous situation which, if instructions are not followed, could result in - Konica Minolta AccurioPress 6272P | Plockmatic SD-350/SD-500 System Operator Man - Page 4
or screws other than those specified in this manual. • Turn off the power and disconnect You suspect that your equipment needs service or repair. • Your equipment's only by authorized and instructed persons. The responsibilities on support surface with adequate strength tor the weight of the machine. - Konica Minolta AccurioPress 6272P | Plockmatic SD-350/SD-500 System Operator Man - Page 5
that the power cord will not be damaged under the machine. • Always contact service if relocating the equipment. • Do not move the machine while the machine , left and right refer to the paper transport direction. • The operator manual always has to be available at the place of use of the machine. - Konica Minolta AccurioPress 6272P | Plockmatic SD-350/SD-500 System Operator Man - Page 6
Page intentionally blank. - Konica Minolta AccurioPress 6272P | Plockmatic SD-350/SD-500 System Operator Man - Page 7
Stacker...37 Setting up Belt Stacker for right-angled mode 37 Setting up Belt Stacker for straight mode 38 2. Making Booklets Guided Start...39 Guided Start, step by step...39 Changing settings...42 General procedure...42 Basic settings...42 Input Sheet Size...42 Selecting standard paper sizes - Konica Minolta AccurioPress 6272P | Plockmatic SD-350/SD-500 System Operator Man - Page 8
feed mode...53 3. Tools Tools...55 The Tools screen...55 Stacker full detection...55 Units...55 Software version...56 Paper path light...56 Language...56 Service mode...57 Fold delay...57 Sheet feeder...57 Auto Rotate...58 BookFold Offset...58 4. Jobs Handling jobs...59 Saving a Job...59 Opening and - Konica Minolta AccurioPress 6272P | Plockmatic SD-350/SD-500 System Operator Man - Page 9
stacker...72 Clearing misfeed(s)...72 Clearing misfeed on belt stacker...72 6. Troubleshooting Fault codes...73 General...73 RCT fault codes...73 Booklet Maker fault 99 BookFold Module ...100 BST4000-1 Belt Stacker Module 100 System Set Size Guide...101 Cables, plugs and jumpers...105 INDEX 106 - Konica Minolta AccurioPress 6272P | Plockmatic SD-350/SD-500 System Operator Man - Page 10
Page intentionally blank. 10 - Konica Minolta AccurioPress 6272P | Plockmatic SD-350/SD-500 System Operator Man - Page 11
What You Can Do With This Machine BookFold Module (option) Belt Stacker SD-BM500 upgrade kit (option) incl. Alive logo Cover Feeder Module (option) Trimmer Module (option) Rotate Crease Trim Module (option) SD-BM500 Production Booklet Maker Interface Module (comes with the RCT) The - Konica Minolta AccurioPress 6272P | Plockmatic SD-350/SD-500 System Operator Man - Page 12
continued from previous page If a Cover Feeder Module is installed in the Booklet Maker, it can add any type of cover, in colour or black and white, to the printed set. The Booklet Maker jogs and staples the set. The set is then transported further into the Booklet Maker to the folding area where - Konica Minolta AccurioPress 6272P | Plockmatic SD-350/SD-500 System Operator Man - Page 13
Guide To Components Booklet Maker 2 1 3 4 5 6 8 7 1 Top cover 5 Base 2 Hand feeding paper guides 6 Latch handle 3 Infeed assembly 7 Live logo, only on SD-BM500 (optional) 4 Docking assembly 8 Belt Stacker 13 - Konica Minolta AccurioPress 6272P | Plockmatic SD-350/SD-500 System Operator Man - Page 14
Booklet Maker, continued 1 2 3 4 5 6 1 Hand feed cover 2 Connections 3 Cable protector 4 Cable holders 5 Fold stop gate 6 Base NOTE: How to connect cables, plugs and jumpers is described at the end of this manual. 14 - Konica Minolta AccurioPress 6272P | Plockmatic SD-350/SD-500 System Operator Man - Page 15
continued Parts that are important for setup, adjustments, troubleshooting or maintenance are highlighted below. 1 10 9 8 7 65 4 3 2 1 Hand feeding paper guides 2 Stapler guides 3 Staple cartridges (incl. stapler heads) 4 Stapler guides release lever 5 Main power switch 6 Set thickness sensor - Konica Minolta AccurioPress 6272P | Plockmatic SD-350/SD-500 System Operator Man - Page 16
at all and remaining buttons may stretch to fit the screen. This manual will most often show a fully configured system. Control Panel The control panel here you can choose to set up Booklet Production, perform a Guided Start, retrieve stored jobs or access the General System Settings. Settings - Konica Minolta AccurioPress 6272P | Plockmatic SD-350/SD-500 System Operator Man - Page 17
Start is a function that takes you through all the basic settings the Booklet Maker System needs for booklet production in eight easy steps. See "Guided Start" in section 2 "Making Booklets" for details. The Jobs Screen Pressing the [Open Jobs] button in the Start screen opens the Open saved Job - Konica Minolta AccurioPress 6272P | Plockmatic SD-350/SD-500 System Operator Man - Page 18
The Please wait screen While the machine sometimes needs time to perform changes in settings, the Please wait screen will be shown. Power save mode When the Booklet Maker System is in a ready state, it will enter power save mode after 20 minutes of inactivity. To recover from Power save mode, touch - Konica Minolta AccurioPress 6272P | Plockmatic SD-350/SD-500 System Operator Man - Page 19
Options Rotate Crease Trim Module 1 4 2 3 5 1 Top cover 2 Slide door 3 Interface Module 4 Upstream docking assembly 5 Infeed slot 19 - Konica Minolta AccurioPress 6272P | Plockmatic SD-350/SD-500 System Operator Man - Page 20
Rotate Crease Trim Module, continued 1 2 5 3 4 6 1 Exit slot 2 Trim waste transport 3 Connections 4 Cable protector 5 Downstream docking assembly 6 Waste container NOTE: How to connect cables, plugs and jumpers is described at the end of this manual. 20 - Konica Minolta AccurioPress 6272P | Plockmatic SD-350/SD-500 System Operator Man - Page 21
Rotate Crease Trim Module, continued Parts that are important for setup, adjustments, troubleshooting or maintenance are highlighted below. 8 12 3 4 5 6 7 1 Exit section "D" 2 Jam clearance baffle "D", exit area 3 Bleed trimmer circular knives 4 Infeed Section "A" 5 Main switch 6 Jam - Konica Minolta AccurioPress 6272P | Plockmatic SD-350/SD-500 System Operator Man - Page 22
Rotate Crease Trim Module, continued 1 2 3 4 1 Waste chute(s) 2 Creaser registration adjustment 3 Bleed trimmer registration adjustment 4 Latch handle, slide 22 - Konica Minolta AccurioPress 6272P | Plockmatic SD-350/SD-500 System Operator Man - Page 23
Rotate Crease Trim Module, continued 1 2 4 3 1 Creaser tools 2 Jam clearance baffle, fine registra- tion, section "C" 3 Jam clearance baffle, coarse regis- tration, section "B" 4 Rotator 23 - Konica Minolta AccurioPress 6272P | Plockmatic SD-350/SD-500 System Operator Man - Page 24
Booklet Maker Alive logo Alive logo With a SD-BM500 upgrade kit installed, the three stripes below the user interface will signal status as follows: Not illuminated - System in power save mode or switched off. Steady blue - System is on and ready. Blue stripes add one at a time, faster - System is - Konica Minolta AccurioPress 6272P | Plockmatic SD-350/SD-500 System Operator Man - Page 25
Cover Feeder 3 1 4 2 5 7 1 Loading capacity mark 2 Rear side guide 3 Feed roller assembly 4 Paper separator pad 6 5 Front side guide 6 Paper orientation indicator 7 Air nozzle (2x) 8 Jam clearance baffle 8 25 - Konica Minolta AccurioPress 6272P | Plockmatic SD-350/SD-500 System Operator Man - Page 26
BookFold Module 1 2 3 4 6 7 8 5 9 1 Top cover 2 Latch handle 3 Docking studs 4 Exit slot 5 Base 6 Infeed slot 7 Connections 8 Cable protector 9 Cable holder NOTE: How to connect cables, plugs and jumpers is described at the end of this manual. 26 - Konica Minolta AccurioPress 6272P | Plockmatic SD-350/SD-500 System Operator Man - Page 27
BookFold Module, continued Parts that are important for setup, adjustments, troubleshooting or maintenance are highlighted below. 1 3 2 BookFold Module, top view, non operator side upper feed belts lifted up 1 Upper feed belt release latch 2 Lower feed belts 3 - Konica Minolta AccurioPress 6272P | Plockmatic SD-350/SD-500 System Operator Man - Page 28
Trimmer 1 2 3 4 7 5 8 9 6 10 1 Top cover 2 Latch handle 3 Docking studs 4 Exit slot 5 Trim bin 6 Base 7 Infeed slot 8 Connections 9 Cable protector 10 Cable holder NOTE: How to connect cables, plugs and jumpers is described at the end of this manual. 28 - Konica Minolta AccurioPress 6272P | Plockmatic SD-350/SD-500 System Operator Man - Page 29
Trimmer, continued Parts that are important for setup, adjustments, troubleshooting or maintenance are highlighted below. 1 6 7 2 8 3 4 9 Trimmer, top view 5 1 Set counter 2 Exit drive lifting lever 3 Trimmer stop 4 Exit drive release 5 Exit compressing brackets 6 Infeed roller shaft 7 - Konica Minolta AccurioPress 6272P | Plockmatic SD-350/SD-500 System Operator Man - Page 30
at a 90 degree angle. Parts that are important for setup, adjustments, troubleshooting or maintenance are highlighted below. 5 4 2 3 2 1 6 8 1 Stacking tray 2 Conveyor belt 3 COM-cable 4 Side guides 5 Front end side guide adjustment knobs 6 Leg assembly 7 Control panel box 8 Height adjustment - Konica Minolta AccurioPress 6272P | Plockmatic SD-350/SD-500 System Operator Man - Page 31
at the highest speed, independent of the speed setting. The power switch is also used to reset the unit after an overload situation. T10198 Operator Manual - Booklet Maker System BM2000 Generation 3 3311 Rev. date: 5 June 2014 - Konica Minolta AccurioPress 6272P | Plockmatic SD-350/SD-500 System Operator Man - Page 32
Page intentionally blank. - Konica Minolta AccurioPress 6272P | Plockmatic SD-350/SD-500 System Operator Man - Page 33
1. Basics Turning On / Off the Main Power RCT, Booklet Maker, BookFold Module, Trimmer & BST Module 1 Make sure that the Booklet Maker, RCT module (optional) and BST power cords are plugged into the wall outlet. NOTE: BookFold (optional) and/or Trim (optional) Modules are both powered from the - Konica Minolta AccurioPress 6272P | Plockmatic SD-350/SD-500 System Operator Man - Page 34
[B] and pulling either or both staple [B] cartridges [C] out using the grip [E] at both sides of the staple cartridge. NOTE: Lever [A] controls the stapler guides [D]. It is kept in place by a magnet and can be hard to release. Pressing either lever [B] makes it a bit easier to overcome the force - Konica Minolta AccurioPress 6272P | Plockmatic SD-350/SD-500 System Operator Man - Page 35
avoid smearing. 4 Press on top of either air nozzle [A] to lower the paper bin. Load the covers facing downwards into the paper bin. 5 Adjust side guides [B] up against the cover sheets until there is no clearance. NOTE: Make sure covers are same size as sheets fed to booklet maker. When using - Konica Minolta AccurioPress 6272P | Plockmatic SD-350/SD-500 System Operator Man - Page 36
Emptying the trim waste bin Remove the trim waste bin by lifting it and pulling it out. 1 trim waste bin 36 - Konica Minolta AccurioPress 6272P | Plockmatic SD-350/SD-500 System Operator Man - Page 37
Gatubidoeth[B] endtos.give at least 5 mm play. 3 Tighten the Side Guides at both Adjeunsdt sth. e stacking with belt speed selector. Adjust the stacking with belt speed selector. See page 11. 5 mm T10198 Operator Manual - Booklet Maker System BM2000 Generation 3 55 Rev. date: 5 June 203147 - Konica Minolta AccurioPress 6272P | Plockmatic SD-350/SD-500 System Operator Man - Page 38
Setting up Belt Stacker for Straight Mode Setting up Belt Stacker for straight mode 1 2 1 AdjuAsdt jSuidset GSuidideesGtouitdheeisr to their outeorumteorsmt poostsiptioonsitbioynloboyselonoinsgening knobknso[Abs]. [A]. 2 Adjust the stacking with belt speed selector [B]. Adjust the stacking - Konica Minolta AccurioPress 6272P | Plockmatic SD-350/SD-500 System Operator Man - Page 39
system also affects the information shown and button size will adapt to fit screen. To proceed from one screen to another, press the [Next] button. Guided Start 2/8 Select the sheet size loaded for the job by pressing the corresponding button. For other sizes, follow "Custom sheet size" described in - Konica Minolta AccurioPress 6272P | Plockmatic SD-350/SD-500 System Operator Man - Page 40
to Auto, a minimum trim, based on the information from Set Thickness Sensor, is calculated. To set the trim manually, follow "Finished Booklet size" described in section "Basic Settings" below. Guided Start 4/8 Select whether the Cover Feeder is to be used or not and press the corresponding button - Konica Minolta AccurioPress 6272P | Plockmatic SD-350/SD-500 System Operator Man - Page 41
on booklets containing less than 6 sheets. Press the corresponding button. 2 After you are done, press the [Finish] button to conclude the Guided Start. Guided Start 8/8 All settings needed to begin producing booklets are now set. Start production by sending the print job from the printer. After the - Konica Minolta AccurioPress 6272P | Plockmatic SD-350/SD-500 System Operator Man - Page 42
for Booklet Production screen Procedure for permanent changes: To keep your new settings, press the [Save current settings] button. Follow on screen instructions to save your current settings as a new job or to an existing job. NOTE: Choose either of the above mentioned procedures when changing - Konica Minolta AccurioPress 6272P | Plockmatic SD-350/SD-500 System Operator Man - Page 43
AUTO sheet size AUTO means that the Booklet Maker will adjust to the paper size information sent from the printer. Auto Rotate will be turned on and a finished booklet size will be chosen from a predefined list i.e. the [Finished Booklet Size] button will be greyed out. No other settings will be - Konica Minolta AccurioPress 6272P | Plockmatic SD-350/SD-500 System Operator Man - Page 44
Custom booklet size 2 44 To set the trim manually, press [Custom Booklet Size] and then [Edit]. To adjust the amount of face trim, press the number on the [Length] button and type in the - Konica Minolta AccurioPress 6272P | Plockmatic SD-350/SD-500 System Operator Man - Page 45
save setting by pressing the green [check] button. Adjusting staple position From the Settings for Booklet Production screen, press the [Staple] button. Set to Manual, the staple position can be altered up to 3 mm (0.12") on either side of the fold. Press the [+] button move position closer to the - Konica Minolta AccurioPress 6272P | Plockmatic SD-350/SD-500 System Operator Man - Page 46
in the control panel. If enabled, the cover feeder will automatically feed one sheet to each set from the printer, or one sheet to each manually, hand-fed set. A higher paper weight, pre-printed cover is fed to the set waiting in the compiler. The set and the cover are then - Konica Minolta AccurioPress 6272P | Plockmatic SD-350/SD-500 System Operator Man - Page 47
Cover Air Separation Double Sheet Detection From the Settings for Booklet Production screen, press the [Cover] button. Press the [Yes] button and confirm by pressing the green [check] button. 2 You may want to increase the Air flow when running thick, heavy covers. From the Cover screen, press the - Konica Minolta AccurioPress 6272P | Plockmatic SD-350/SD-500 System Operator Man - Page 48
cover sheet will be stapled and folded and then fed to the stacker. BookFold General The BookFold module has three different settings - Manual, Auto and Off. In Manual mode, there are eight different modes of BookFold pressure to choose from. Set to Auto, information from the set thickness sensor - Konica Minolta AccurioPress 6272P | Plockmatic SD-350/SD-500 System Operator Man - Page 49
The table below shows highest supported BookFold pressure settings on SD-500 and SD-350 Production setting From the Settings for Booklet Production screen, press the [BookFold] button. Press the [Manual] button and select the desired amount of pressure using the [+] and [-] buttons. Save setting - Konica Minolta AccurioPress 6272P | Plockmatic SD-350/SD-500 System Operator Man - Page 50
Crease The Crease function makes it possible to crease the cover sheet of the booklet in order to avoid toner cracking or flaking at the fold. Crease Mode 2 From the Settings for Booklet Production screen, press the [Crease] button. Press the corresponding button to choose [On Fine], [On Coarse] - Konica Minolta AccurioPress 6272P | Plockmatic SD-350/SD-500 System Operator Man - Page 51
. NOTE: Too tight of a setting may worsen the result. After setting registration value, press the [Check set registration] button and follow the instructions on screen. If you are satisfied with the registration, confirm by pressing the green [check] button. If not, press the [-] and [+] buttons - Konica Minolta AccurioPress 6272P | Plockmatic SD-350/SD-500 System Operator Man - Page 52
Bleed Trimmer - Asymmetric Side Trim From the Finished Booklet size screen, press the [Asymetric Side Trim] button. 2 Choose Asymmetric Side Trim if you want to offset the bleed trim. Move using the [+] and [-] buttons and press the green [check] button to save setting. Settings as in the example - Konica Minolta AccurioPress 6272P | Plockmatic SD-350/SD-500 System Operator Man - Page 53
stand-alone unit. Hand feed mode [A] 1 Setup the Booklet Maker to the correct 2 paper size. 2 Open the Top Cover. 3 Adjust the hand feeding paper guides [A] to the correct paper size. 4 Close the Top Cover. 5 Open the Hand feed Cover [B]. 6 Start hand feeding sets [C] when the text [Read to - Konica Minolta AccurioPress 6272P | Plockmatic SD-350/SD-500 System Operator Man - Page 54
Page intentionally blank. - Konica Minolta AccurioPress 6272P | Plockmatic SD-350/SD-500 System Operator Man - Page 55
3. Tools Tools The Tools screen From the Start screen or the Settings for Booklet Production screen, press the [Tools] button to get to the General System Settings screen. Select the setting you want to change by pressing the corresponding button. Press the green [check] button to save your changes - Konica Minolta AccurioPress 6272P | Plockmatic SD-350/SD-500 System Operator Man - Page 56
by pressing the corresponding button to display the software version. Press [Exit] button to go back to the Settings screen. This function is for service purposes. To turn the paper path light on, press [ON 5 min] button and save by pressing the [OK] button. Language Select desired language by - Konica Minolta AccurioPress 6272P | Plockmatic SD-350/SD-500 System Operator Man - Page 57
mode Fold delay Sheet feeder This function is for authorized service personnel only and is password protected. 3 With this feature, the set will stay under pressure between the fold rollers for extended time to provide a flatter - Konica Minolta AccurioPress 6272P | Plockmatic SD-350/SD-500 System Operator Man - Page 58
Auto Rotate If your system includes the optional RCT module, you can select whether you want Auto Rotate function to be ON or OFF by pressing the corresponding button. It is recommended to keep this ON. When turned on, the Rotator will automatically rotate all sheet sizes sent from the printer - Konica Minolta AccurioPress 6272P | Plockmatic SD-350/SD-500 System Operator Man - Page 59
4. Jobs Handling jobs The Booklet Maker has a maximum storage capacity of 20 different jobs. To make temporary changes in the actual job settings or temporary changes of a stored job, see section 2, "Making Booklets." From the Start screen, press the [Jobs] button to be able to store, change or - Konica Minolta AccurioPress 6272P | Plockmatic SD-350/SD-500 System Operator Man - Page 60
Opening and handling stored Jobs To access already stored jobs, press from the Start Screen. 4 60 Open (load) any stored job by pressing the job and confirm by pressing the green [check] mark. Delete any stored job by pressing the job button, the waste bin symbol and then confirm by pressing - Konica Minolta AccurioPress 6272P | Plockmatic SD-350/SD-500 System Operator Man - Page 61
5. Clearing Misfeed(s) Clearing misfeed(s) General If a misfeed condition should occur, it is indicated on the Booklet Maker display. The message "Clear Misfeed(s)", an error code and the location of the misfeed is displayed. See examples below. Misfeeds in the Rotate Crease Trim Module are - Konica Minolta AccurioPress 6272P | Plockmatic SD-350/SD-500 System Operator Man - Page 62
RCT module Clearing misfeed(s) in the paper path Interface Module 1 Open the RCT Top Cover. 2 Reach inside the Interface Module and lift up the baffle marked with a green dot. The Interface Module baffle is located just to the right of baffle "A". 3 Remove any missfeed(s). 4 Lower baffle to normal - Konica Minolta AccurioPress 6272P | Plockmatic SD-350/SD-500 System Operator Man - Page 63
Infeed "A" area and exit "D" area 1 Open the RCT Top Cover. 2 Lift up baffles "A" and "D" if needed. 3 Remove any missfeed(s). 4 Lower baffles "A" and "D" to normal position 5 Missfeed(s) in the trimmer area are rolled out by rotating the rubber surfaced pinch roller [A]. 6 Close the top cover. - Konica Minolta AccurioPress 6272P | Plockmatic SD-350/SD-500 System Operator Man - Page 64
Registration and creaser area 1 Open the slide door [A]. 2 Unlatch and pull out the slide [B]. 3 Open baffles "B" and "C" if needed. 4 Remove any misfeed(s). 5 Close baffles "B" and "C". 6 Push in and latch the slide. 7 Always remove any residual waste from waste channel and waste [C] belt before - Konica Minolta AccurioPress 6272P | Plockmatic SD-350/SD-500 System Operator Man - Page 65
a misfeed indicated in Area B2 1 Open the top cover. 2 Close top cover. If system does not purge, open top cover and remove misfed sheets manually. To clear a misfeed indicated in Area B3 1 Open the top cover. 2 Close top cover. If misfeed condition remains: 1 Switch off the main power. 2 Switch - Konica Minolta AccurioPress 6272P | Plockmatic SD-350/SD-500 System Operator Man - Page 66
Clearing misfeed(s), continued Clearing misfeed in infeed area 1 Open the Top Cover. 2 Depending on where the misfeed occurred, the upper or lower part of the Infeeder [A] can be lifted at the green dots [A] to facilitate removal of misfed sheets. When the Booklet Maker is connected to an RCT, the - Konica Minolta AccurioPress 6272P | Plockmatic SD-350/SD-500 System Operator Man - Page 67
. 3 Remove sheets/booklets in folder area between fold rollers. 4 In reversed manner, place the fold roller paper guide back in operating position. NOTE: Make sure the fold roller paper guide is locked in operating position [B] at both sides. 5 5 Close Top Cover. [A] 21 3 Fold roller paper - Konica Minolta AccurioPress 6272P | Plockmatic SD-350/SD-500 System Operator Man - Page 68
Cover Feeder Clearing misfeed(s) in vertical transport area 1 Open the Top Cover [A]. 2 Lift the jam clearance baffle [B]. 3 Remove the misfed sheet. 4 Put the jam clearance baffle back in normal position. 5 [A] [B] 68 - Konica Minolta AccurioPress 6272P | Plockmatic SD-350/SD-500 System Operator Man - Page 69
BookFold Module Clearing misfeed(s) Inside the BookFold module 1 Open the top cover. 2 Lift up upper feed belts (A) to access jammed/misfed booklets. NOTE: Press the green dots (B) (only one visible in picture) on the latches to release. 3 Remove the jammed/misfed booklets. 4 Place the upper - Konica Minolta AccurioPress 6272P | Plockmatic SD-350/SD-500 System Operator Man - Page 70
Trimmer Clearing misfeed(s) The upper trimmer blade on the trimmer is protected by a knife protection plate that moves away during the cutting stroke. WARNING Never put fingers or other parts of the body between the upper and lower trimmer knives. Clearing misfeed in input area 1 Raise the rightmost - Konica Minolta AccurioPress 6272P | Plockmatic SD-350/SD-500 System Operator Man - Page 71
Clearing misfeed(s), continued Clearing misfeed in exit area 1 Lift the exit compressing brackets and transport belts [B] at the green dot. 2 Secure using the latch [C]. Not clearly visible in picture 3 Remove the misfed sheets from the exit area. 4 After the misfed sheets are removed, release the - Konica Minolta AccurioPress 6272P | Plockmatic SD-350/SD-500 System Operator Man - Page 72
Belt stacker Clearing misfeed(s) Clearing misfeed on belt stacker 1 Lift the belt stacker exit cover (A). 2 Remove jammed/misfed booklets. 3 Place belt stacker exit cover back in operating position. 5 A 72 - Konica Minolta AccurioPress 6272P | Plockmatic SD-350/SD-500 System Operator Man - Page 73
you troubleshooting. If frequent input jams are experienced please check paper curl and de-curler adjustments in printer operator guide. For fault codes other than specified below - remove any paper in the paper path and power Off and On the system. NOTE: If procedures in this manual do not rectify - Konica Minolta AccurioPress 6272P | Plockmatic SD-350/SD-500 System Operator Man - Page 74
there might be an internal communication area, please power off and power on to error. Power off and on the system. If problem persists, recover! contact customer support. BM-170, Incompatible RCT software! Software in the RCT is reported to be of an incompatible version. Power off and on the - Konica Minolta AccurioPress 6272P | Plockmatic SD-350/SD-500 System Operator Man - Page 75
might be an internal communication area, please power off and power on to error. Power off and on the system. If problem persists, recover! contact customer support. CF-201 Out of covers, remove sheets Indicates "Out of covers" in the Cover Feeder. Load from Booklet Maker! covers according - Konica Minolta AccurioPress 6272P | Plockmatic SD-350/SD-500 System Operator Man - Page 76
Indicates that there might be an internal communication error. Power off and on the system. If problem persists, contact customer support. A misfeed has occurred in the BookFold Module. If problem persists, clean feed belts according to section 7, "REMARKS." Check that the pressure on the upper feed - Konica Minolta AccurioPress 6272P | Plockmatic SD-350/SD-500 System Operator Man - Page 77
there might be an internal communication area, please power off and power on to error. Power off and on the system. If problem persists, recover! contact customer support. TR-201 - TR-206 Clear misfeed A misfeed has occurred in the Trimmer. See section 5, "Clearing Misfeed(s)" for how to clear - Konica Minolta AccurioPress 6272P | Plockmatic SD-350/SD-500 System Operator Man - Page 78
General fault codes Clear Misfeed(s) Close cover(s) 6 Empty stacker! In general, fault codes indicate a misfeed condition. When a misfeed occurs, a code, the message "Clear misfeed(s)" and the jam area will be displayed. See section 5, "Clearing Misfeeds", for how to clear a misfeed. When the - Konica Minolta AccurioPress 6272P | Plockmatic SD-350/SD-500 System Operator Man - Page 79
the equipment if you notice unusual noises or odors. Disconnect the power cord from the power source and call your authorized technician to correct the problem. WARNING Do not put fingers or other parts of the body between the upper and lower trimmer knives. • Do not switch off the main power - Konica Minolta AccurioPress 6272P | Plockmatic SD-350/SD-500 System Operator Man - Page 80
Where to put Your Machine Machine environment • Always locate the equipment on a solid support surface with adequate strength for the weight of the machine. • Always keep magnets and all devices with strong magnetic fields away from the machine. If - Konica Minolta AccurioPress 6272P | Plockmatic SD-350/SD-500 System Operator Man - Page 81
Access to machine Place the machine near the power source, providing clearance as shown. 550 mm 22" 105 mm 4" 90 mm 3.5" 905 mm 35.5" 1880 mm 74" 750 mm 29.5" 700 mm 27.5" 660 mm 26" 400 mm 16" 530 mm 21" 420-630 mm 360 mm 360 mm 17-26" 14" 14" 880 mm 34.5" 720 mm 28.5" 200 mm 7 8" - Konica Minolta AccurioPress 6272P | Plockmatic SD-350/SD-500 System Operator Man - Page 82
Maintaining Your Machines Never attempt any maintenance function that is not specifically described in this documentation. Cover Feeder Cleaning feed rollers and paper separator pad The Feed rollers need to be cleaned regularly when in use, and if the unit has not been used for a period of time. - Konica Minolta AccurioPress 6272P | Plockmatic SD-350/SD-500 System Operator Man - Page 83
BookFold Module Cleaning feed belts The Feed belts need to be cleaned regularly when in use, and if the unit has not been used for a period of time. How often this should be done, depends on the paper type and print quality. An increasing number of misfeeds is one indication of the need to clean the - Konica Minolta AccurioPress 6272P | Plockmatic SD-350/SD-500 System Operator Man - Page 84
BookFold Module, continues Pressure springs If feed errors occur, check that the pressure on the upper feed belts is set to the default position. The pressure springs should always be at its upper position where the pressure is equal to its highest value. Non operator side spring in upper position ( - Konica Minolta AccurioPress 6272P | Plockmatic SD-350/SD-500 System Operator Man - Page 85
are cleaned with the same cleaning agent used to clean the printer and a lint free cloth. Sensors are wiped clean with a lint free cloth. A problem with registration accuracy is often related to build up residual toner and paper dust. CAUTION Never use any cleaning fluids on sensors. Cleaning the - Konica Minolta AccurioPress 6272P | Plockmatic SD-350/SD-500 System Operator Man - Page 86
Cleaning the paper path transportation nip rollers (12x) continued Nip rollers 7 Nip rollers (2x) Cleaning the fixing rollers (3x) Also clean the idling rollers WARNING Do not place your fingers inside the knife guards. Doing so may result in injury. Nip rollers Knife guards Fixing rollers - Konica Minolta AccurioPress 6272P | Plockmatic SD-350/SD-500 System Operator Man - Page 87
Cleaning the fixing rollers (3x) continued Fixing rollers 7 Cleaning the registration cross roller (4x) & friction tires (4X) Registration cross rollers Cleaning friction tires 87 - Konica Minolta AccurioPress 6272P | Plockmatic SD-350/SD-500 System Operator Man - Page 88
Cleaning the rotator rollers (2x) Also clean the idler rollers Rotator rollers 7 Cleaning the paper path sensors (5x) WARNING Do not place your fingers inside the knife guards. Doing so may result in injury. Infeed sensor Exit sensor Knife guards continued on next page 88 - Konica Minolta AccurioPress 6272P | Plockmatic SD-350/SD-500 System Operator Man - Page 89
Cleaning the paper path sensors (5x) continued Rotator sensor 7 Registration sensor 89 - Konica Minolta AccurioPress 6272P | Plockmatic SD-350/SD-500 System Operator Man - Page 90
Cleaning the paper path sensors (5x) continued Creaser sensor 7 Cleaning of creaser tools (2x) After a period of time toner and paper dust may leave residuals in the grooves of the tool. These grooves must be cleaned periodically to maintain creasing performance. Grooves on both sides of the tool 90 - Konica Minolta AccurioPress 6272P | Plockmatic SD-350/SD-500 System Operator Man - Page 91
Adjustment of Bleed Trimmer registration angle (parallel cut) Adjustment of Bleed Trimmer registration angle (trimmer cut parallel to registration (operator side) edge) 1 Turn adjustment screw [A] in desired direction. Change in adjustment is reflected on the reference scale [B]. Turn the - Konica Minolta AccurioPress 6272P | Plockmatic SD-350/SD-500 System Operator Man - Page 92
Adjustment of Creaser registration angle Adjustment of Creaser registration angle 1 Loosen the star shaped knob [A]. 2 Turn the knurled eccentric adjuster [B] to move reference mark in the desired direction. 3 Tighten the star shaped knob [A] again. Process direction Lower the operator side side - Konica Minolta AccurioPress 6272P | Plockmatic SD-350/SD-500 System Operator Man - Page 93
Module is present in the configuration, it should be turned ON or feed problem at output may occur. • If the Adjustment of "Bleed Trimmer registration angle" described in section Maintaining Your Machines in the OP manual is set too tight, the sheets may show wrinkles in the process direction - Konica Minolta AccurioPress 6272P | Plockmatic SD-350/SD-500 System Operator Man - Page 94
Module is present in the configuration it shall be turned ON or feed problem at output may occur. • Heavy weight media will show image crack in may appear on sensitive media on the inner sheet. • Marks from side guide motion may appear on sensitive media. • Never run simplex printed sheets from - Konica Minolta AccurioPress 6272P | Plockmatic SD-350/SD-500 System Operator Man - Page 95
media, staples may not completely penetrate the set resulting in a faulty staple. If problem persists, consider changing media. Staple may not be able to penetrate the number of sheets indicated by the "Set Size Guide". Some uncoated extra "dense" paper may show the same limitation. The following - Konica Minolta AccurioPress 6272P | Plockmatic SD-350/SD-500 System Operator Man - Page 96
7 Page intentionally blank. 96 - Konica Minolta AccurioPress 6272P | Plockmatic SD-350/SD-500 System Operator Man - Page 97
8. Specification Machine Specifications Rotate Crease Trim Module (option) Speed Standard Paper Sizes Paper Size Minimum (Out) Paper Size Maximum (Out) Paper Width Maximum (In) Specifications Same as SD-BM350/500 Booklet Maker Same as SD-BM350/500 Booklet Maker Same as SD-BM350/500 Booklet Maker - Konica Minolta AccurioPress 6272P | Plockmatic SD-350/SD-500 System Operator Man - Page 98
based on rough estimates and founded on pure observation Folding/stapling capabil- 2 - 35 or 50 Sheets (80gsm / 20lb Bond) ity See Set Size Guide for more information Folding capability only 1 to 2 sheets Off-line use Possible Staple / Fold (2 staples) Weight 155 kg / 341.7 lb Dimensions - Konica Minolta AccurioPress 6272P | Plockmatic SD-350/SD-500 System Operator Man - Page 99
Cover Feeder Module Maximum Speed Specifications Same as SD-BM350/500 Booklet Maker Standard Paper Sizes Same as SD-BM350/500 Booklet Maker Paper Weight (Minimum) 64gsm / 16lb Bond Paper Weight (Maximum) 250gsm / 67lb Bond Cover Feeder Capacity 20mm (app. 200 sheets of 80gsm paper) 13/16" ( - Konica Minolta AccurioPress 6272P | Plockmatic SD-350/SD-500 System Operator Man - Page 100
BST4000-1 Belt Stacker Module 8 Specifications Speed Variable Overlap Adjustable Capacity A4 / 8,3"x11,7" ....≥ 1,000 A3 / 11,7"x16,5" .....≥ 500 Side guides Adjustable 0-357mm / 14" Weight 70kg/1541lb Dimensions Table height Width Length 575 - 1000mm / 22.6" - 39.4" 440mm / 17" 1380mm - Konica Minolta AccurioPress 6272P | Plockmatic SD-350/SD-500 System Operator Man - Page 101
coated media staples may not penetrate the set resulting in a faulty staple. If problem persists, consider changing media. Staple may not be able to penetrate the number of sheets indicated by the "Set Size Guide". Some uncoated extra "dense" paper may show the same limitation. The following media - Konica Minolta AccurioPress 6272P | Plockmatic SD-350/SD-500 System Operator Man - Page 102
Declaration of Conformity EU DECLARATION OF CONFORMITY [1] No.[2 D0001499 (D.4) Manufacturer [3] ........ Plockmatic International AB, Telefonvägen 30, S-126 26 Hägersten, Sweden This Declaration of Conformity is issued under the sole responsibility of the manufacturer [4] Object of the - Konica Minolta AccurioPress 6272P | Plockmatic SD-350/SD-500 System Operator Man - Page 103
DECLARATION OF CONFORMITY [1] according to ISO/IEC & EN 17050-1 No.[2 N0003931 (C.2) Issuer's name [3] ....... Plockmatic International AB Issuer's address [4]... Telefonvägen 30, S-126 26 Hägersten, Sweden Object of the Declaration [5] Type/Model [6] Name [7] Description [8] F102-012 SD-350 SD- - Konica Minolta AccurioPress 6272P | Plockmatic SD-350/SD-500 System Operator Man - Page 104
EU DECLARATION OF CONFORMITY [1] No.[2 D0000356 (I.3) Manufacturer [3] ........ Plockmatic International AB, Telefonvägen 30, S-126 26 Hägersten, Sweden This declaration of conformity is issued under the sole responsibility of the manufacturer [4] Object of the Declaration [5] Type/Model [6] Name - Konica Minolta AccurioPress 6272P | Plockmatic SD-350/SD-500 System Operator Man - Page 105
Cables, plugs and jumpers Schematical description of how to connect communication cables, termination plugs and interlock jumpers on all possible system configurations. 102-110017 T♀ SD-350/500 Wiring Overview 2017-09-14 13:48 STACKER T♂ PRINTER SD-RCT T♀ SD-BM SD-BF SD-TR STACKER T♂ - Konica Minolta AccurioPress 6272P | Plockmatic SD-350/SD-500 System Operator Man - Page 106
Booklet Size 43 Fold delay 57 Fold position 46 G General fault codes 78 General safety 4 Guided Start 39 Guide To Components 13 H Hand-feeding 53 Hand feed mode 53 Handling jobs 59 How to read this manual 3 I Input Sheet Size 42 Introduction 3 J Jobs 59 L Language 56 Limitations of the SD-350/SD - Konica Minolta AccurioPress 6272P | Plockmatic SD-350/SD-500 System Operator Man - Page 107
sizes 42 Service mode 57 Set registration (fine adjustment) 51 Setting up Belt Stacker 37 Sheet feeder 57 Software version 56 Specification 97 Stacker full detection 55 Staple 45 System Set Size Guide 101 T Tools 55 Trimmer 28, 70 Trimmer fault codes 77 Trimmer Module 99 Troubleshooting 73 Turning - Konica Minolta AccurioPress 6272P | Plockmatic SD-350/SD-500 System Operator Man - Page 108
Read this manual carefully before you use this product and keep it handy for future
reference.
For safety, please follow the instructions in this manual.
Operator Manual
Doc no: X04106D_EN
Date: 14 October 2016
Plockmatic SD-350/500
Production Booklet Maker