Konica Minolta KIP 800 Color Series KIPFold 2000 Connection Kit User Guide
Konica Minolta KIP 800 Color Series Manual
View all Konica Minolta KIP 800 Color Series manuals
Add to My Manuals
Save this manual to your list of manuals |
Konica Minolta KIP 800 Color Series manual content summary:
- Konica Minolta KIP 800 Color Series | KIPFold 2000 Connection Kit User Guide - Page 1
KIPFold 2000 Connection Kit KIP 7170 / 7770 / 7970 KIP 850 / 860 / 870 / 880 / 890 Rev 7 Contents Contents ...2 Mounting the fuser guide plate...4 Attach the mylar strip to the interface...5 The alignment of folder to printer ...6 Place rubber pads underneath the printer leveling legs 6 Place - Konica Minolta KIP 800 Color Series | KIPFold 2000 Connection Kit User Guide - Page 2
Contents Part Name Amount Guide Plate Used with: KIP 7770 without front stacking 1 tray KIP 7970 without front stacking tray Guide Plate Used with: KIP 7170 1 KIP 7770 with front stacking tray KIP 7970 with front stacking tray Serial Interface Cable 1 Rubber pads for leveling - Konica Minolta KIP 800 Color Series | KIPFold 2000 Connection Kit User Guide - Page 3
Internal serial cable Note: Required only with KIP 7170 1 To order from KIP as needed Part Number : Z038090120 (Instructions included with cable) Printer Fuser exit Guide Plate 1 Used with: KIP 870/ 880 / 890 Mylar Guide 1 Used with: KIP 850 / 860 Page 3 of 7 - Konica Minolta KIP 800 Color Series | KIPFold 2000 Connection Kit User Guide - Page 4
printers without front stacking option • Remove the film from the adhesive tape • Attach the guide plate at the centre of the printer exit cover as shown Used with: KIP 7770 without front stacking tray KIP 7970 without front stacking tray For printers with front stacking option • Use three M4 x 16 - Konica Minolta KIP 800 Color Series | KIPFold 2000 Connection Kit User Guide - Page 5
Model: 870/ 880 /890 • The folder will use the lower fuser exit • Attach the guide plate cover as shown, it attaches by magnetic tape Model: 850 / 860 • Attach the Mylar strip to the bridge interface as shown in the picture. • Align KIPFold Bridge with the upper rear fuser exit. Page 5 of 7 - Konica Minolta KIP 800 Color Series | KIPFold 2000 Connection Kit User Guide - Page 6
Then alignment folder to KIP Printer Place 4 rubber pads under Printer leveling legs and level printer Page 6 of 7 - Konica Minolta KIP 800 Color Series | KIPFold 2000 Connection Kit User Guide - Page 7
Place 4 rubber pads under folder leveling legs and level folder • COM port: Connect the serial cable to the printers COM-2 serial port to permit online communications. • USB: for future use Page 7 of 7
Page 1 of 7
KIPFold 2000
Connection Kit
KIP 7170 / 7770 / 7970
KIP 850 / 860 / 870 / 880 / 890
Rev 7
Contents
Contents
........................................................................................................................................................................................
2
Mounting the fuser guide plate
.............................................................................................................................................
4
Attach the mylar strip to the interface
................................................................................................................................
5
The alignment of folder to printer
.......................................................................................................................................
6
Place rubber p
ads
underneath the
printer
leveling legs
.............................................................................................
6
Place rubber pads underneath the folder leveling legs
..............................................................................................
7
Connect interface serial cable
..............................................................................................................................................
7