Konica Minolta KIP Color 80 KIP 1130 Stacker User Manual

Konica Minolta KIP Color 80 Manual

Get Konica Minolta KIP Color 80 PDF manuals and user guides View all Konica Minolta KIP Color 80 manuals
Add to My Manuals
Save this manual to your list of manuals

Konica Minolta KIP Color 80 manual content summary:

  • Konica Minolta KIP Color 80 | KIP 1130 Stacker User Manual - Page 1
    Auto Stacker (K-113) USER'S MANUAL Version A.0 March 20, 2007
  • Konica Minolta KIP Color 80 | KIP 1130 Stacker User Manual - Page 2
    K113). Please read this USER'S MANUAL carefully before using the Auto Stacker (K-113). Please keep this USER'S MANUAL for future reference. Installed in system in which business proprietors can participate voluntarily. The targeted products are office equipment such as computers, monitors, printers
  • Konica Minolta KIP Color 80 | KIP 1130 Stacker User Manual - Page 3
    . The following symbols are found throughout the USER'S MANUAL and have the following meaning: WARNING This WARNING mark means that there is a possibility of death or serious injury if you ignore or do not follow the said instruction. CAUTION This CAUTION mark means that there is a possibility
  • Konica Minolta KIP Color 80 | KIP 1130 Stacker User Manual - Page 4
    power source should be as follows: 100-240VAC, 50/60Hz, 3A or higher 2. Use a circuit with a dedicated breaker. 3. Install the machine as close to the wall , contact your service personnel. 1. Do not remove the screw and do not open the cover if not said to do so in this User's Manual. If you
  • Konica Minolta KIP Color 80 | KIP 1130 Stacker User Manual - Page 5
    power cord before moving the equipment. The power cord may damage and it may result in a fire or an electrical shock. 2. If you do not use the machine for a long duration (holidays, company shutdown) turn off and unplug the printer from the outlet for safety. (4)
  • Konica Minolta KIP Color 80 | KIP 1130 Stacker User Manual - Page 6
    TABLE OF CONTENTS 1 Before Use 1. 1 Installation Requirements 1. 2 Specifications 1. 3 Appearance 2 Basic Operation 2. 1 Turning On 2. 2 Turning Off 2. 3 Stacking Support 3 Troubleshooting 3. 1 Paper Jam page 1 2 3 page 4 4 4 page 5 (5)
  • Konica Minolta KIP Color 80 | KIP 1130 Stacker User Manual - Page 7
    Use 1. 1 Installation Requirements The following conditions have to be satisfied when installing the Auto Stacker (K-113). 1. Satisfy the following input power condition. Voltage Current Frequency 100-240VAC 3A or higher 50 / 60Hz. The Auto Stacker (K-113) can be supplied than 60cm Printer 1
  • Konica Minolta KIP Color 80 | KIP 1130 Stacker User Manual - Page 8
    (Width) x 865.6mm (Depth) x 1,312mm (Height) (1,436mm in depth for using ST Wire Tray) Approximately 46.8kg (103.2 lbs) NOTE Auto Stacker (K-113) is intended for the exclusive use of the KIP Color 80 Digital Color Printer (K-107). NOTE These specifications are subject to change without notice. 2
  • Konica Minolta KIP Color 80 | KIP 1130 Stacker User Manual - Page 9
    Inlet Function Prints are stacked here Contains feed rollers to eject prints Will be opened to remove a jammed print Supports large print stacking VDE 8 Modular Connector Connect Modular Cable here Exclusive use for communication with the KIP Color 80 (K-107) (Do not connect a telephone line
  • Konica Minolta KIP Color 80 | KIP 1130 Stacker User Manual - Page 10
    on the left. LED (2) lights when ready. 2 1 2. 2 Turning Off Make sure of completion of the print transportation. Press "O" side of the Power Switch (1) on the left. LED (2) goes off. 2 1 2. 3 Stacking Support For a print of between 594mm (24") and 1,189mm (36") in length, pull ST Wire Trays (1) up
  • Konica Minolta KIP Color 80 | KIP 1130 Stacker User Manual - Page 11
    3 Troubleshooting 3. 1 Paper Jam NOTE (1) To show removing a jammed print, some parts and equipment are omitted for clarification. (2) Make sure that the printer had the print cut. If undone, do it manually according to the printer's manual. 1. Pull Upper Panel Assy (1) up. Keeping Upper Panel Assy
  • Konica Minolta KIP Color 80 | KIP 1130 Stacker User Manual - Page 12
    to the back side with the other hand until it stops (about 200mm backward to stop). This makes a space for jam removing operation around the printer. 1: open 1: open 4 4 NOTE Lock Stacker Unit (4) with ST Tray Stopper after drawing it for safety. 5. Keeping Upper Panel Assy (1) open, pull the
  • Konica Minolta KIP Color 80 | KIP 1130 Stacker User Manual - Page 13
    6. Remove the print from inside the printer. Refer to your printer's documents for removing a jammed print. CAUTION The print will be remained in Fuser Unit of the printer. Handle the print with great care to avoid burning yourself. 7. After removing the print, reposition Stacker Unit (4). 4 NOTE
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
Auto Stacker
(K-113)
USER’S MANUAL
Version A.0
March 20, 2007