Kyocera ECOSYS FS-1320D PCL Barcode Flash 3.0 User's Manual
Kyocera ECOSYS FS-1320D Manual
View all Kyocera ECOSYS FS-1320D manuals
Add to My Manuals
Save this manual to your list of manuals |
Kyocera ECOSYS FS-1320D manual content summary:
- Kyocera ECOSYS FS-1320D | PCL Barcode Flash 3.0 User's Manual - Page 1
PCL Barcode Flash 3.0 User Manual - Kyocera ECOSYS FS-1320D | PCL Barcode Flash 3.0 User's Manual - Page 2
as well. Copyright © KYOCERA Mita Europe B.V. All rights reserved. No part of this manual may be duplicated or Kyocera is a trademark of Kyocera Corporation. Mita is a registered trademark of Kyocera Mita Corporation. PCL Barcode Flash is a registered trademark of KYOCERA Mita Europe B.V. QR Code - Kyocera ECOSYS FS-1320D | PCL Barcode Flash 3.0 User's Manual - Page 3
User Manual PCL Barcode Flash Please read this manual before installing and using the software. Keep the manual somewhere close to the printer. 3 - Kyocera ECOSYS FS-1320D | PCL Barcode Flash 3.0 User's Manual - Page 4
34 3.3.1 Datamatrix 34 3.3.2 Datamatrix mode for printing from SAP 39 3.3.3 QR Code 41 3.3.4 MaxiCode 47 3.3.5 PDF417 53 3.3.6 Australia 4-state barcodes 58 3.4 ERROR MESSAGES 61 3.5 EXAMPLES AND INSTRUCTIONS ON USE 64 3.6 BARCODE TYPES 65 3.6.1 UPC-A 65 3.6.2 UPC-A + a 2 digit extension - Kyocera ECOSYS FS-1320D | PCL Barcode Flash 3.0 User's Manual - Page 5
digit with space character 84 3.6.21 Code 39 Extended 85 3.6.22 Code 39 Extended + Mod47 check digit 86 3.6.23 Code 93 87 3.6.24 Code 93 Extended 88 3.6.25 Code 128 autoswitch 89 3.6.26 Code 128 Subset A 90 3.6.27 Code 128 Subset B 91 3.6.28 Code 128 Subset C 92 3.6.29 UCC-128 93 3.6.30 - Kyocera ECOSYS FS-1320D | PCL Barcode Flash 3.0 User's Manual - Page 6
on how to install and use the PCL Barcode Flash software for Kyocera Mita printers and multifunction devices. Instructions on the installation and configuration of the devices can be found in the relevant installation and user manuals. You will also find here additional information on programming in - Kyocera ECOSYS FS-1320D | PCL Barcode Flash 3.0 User's Manual - Page 7
additional Kyocera Mita manuals included in the delivery (as a PDF file on CD). In this text, the term "barcodes" is frequently used for the sake of simplicity as a generic term for linear barcodes and matrix codes so as to avoid needlessly long phrases. If this document refers to a "printer", this - Kyocera ECOSYS FS-1320D | PCL Barcode Flash 3.0 User's Manual - Page 8
the application PCL Barcode Flash enhances Kyocera Mita FS and KM devices to include additional linear barcodes and matrix codes, as well as providing the sequences follow industry-standard formats, there are usually no problems with integrating devices equipped with the Barcode Flash solution into - Kyocera ECOSYS FS-1320D | PCL Barcode Flash 3.0 User's Manual - Page 9
, please ensure that you have the following components: - a CD containing manual files (in PDF format) and sample prints - a Compact Flash card (pre-programmed with PCL Barcode Flash software) Please complete the registration card and send this to Kyocera Mita. This will allow us to keep you up-to - Kyocera ECOSYS FS-1320D | PCL Barcode Flash 3.0 User's Manual - Page 10
feature of Kyocera Mita FS and KM workgroup printer. The barcodes already available as standard with Kyocera Mita Manual (see appendix). 1.5.2 Terminology In this manual, in most cases we simply refer to "barcodes". In technical terminology, we refer to linear codes, stack codes and matrix codes - Kyocera ECOSYS FS-1320D | PCL Barcode Flash 3.0 User's Manual - Page 11
of square elements, segments of circles, stripes or hexagons of different sizes, or combinations of these. The development history and structure of these codes have been influenced by various demands, such as high data density, fast readability, great data security or the most well-featured codable - Kyocera ECOSYS FS-1320D | PCL Barcode Flash 3.0 User's Manual - Page 12
be used to test compatibility with existing (print) solutions prior to purchase 1.7 Supported Barcodes 1.7.1 Linear codes (one-dimensional codes) 2/5 Interleaved with check digit 2/5 Interleaved without check digit 2/5 Industrial with check digit 2/5 Industrial without check digit 2/5 Matrix with - Kyocera ECOSYS FS-1320D | PCL Barcode Flash 3.0 User's Manual - Page 13
+ Mod11 + Mod10 check digit ZIP+4 Postnet 5 ZIP+4 Postnet 9 ZIP+4 Postnet 11 Australia 4-State 37-CUST Australia 4-State 52-FF-MET Australia 4-State 67-FF-MET Australia 4-State FCC-45 REPLY Singapore Post 4-State USPS Intelligent Mail Barcode 1.7.2 Matrix codes (two-dimensional codes) Datamatrix QR - Kyocera ECOSYS FS-1320D | PCL Barcode Flash 3.0 User's Manual - Page 14
Kyocera Mita printers and multifunction devices. At the time of publishing (version 3.00, March 2008), the following devices are supported: FS-1010 FS-1050 FS-1020D FS-1030D FS-1100 FS-1300 FS-1800 FS-1800+ FS-1900 FS-1920 FS-2000D FS-3800 FS-3820N FS-3830N FS-3900DN FS-4000DN FS-6020 FS-6950DN FS - Kyocera ECOSYS FS-1320D | PCL Barcode Flash 3.0 User's Manual - Page 15
Note The following minimum requirements for the device used should be met so that PCL Barcode Flash can run without complications: Firmware as of April 2001 or newer Min. 16 MB RAM recommended. Less RAM may lead to errors. 15 - Kyocera ECOSYS FS-1320D | PCL Barcode Flash 3.0 User's Manual - Page 16
printer settings/printer environment: - PCL Barcode Flash supports printer Printer, etc.) if they are activated. - For technical reasons, it is not possible to use a number of API programs - the barcode solution is one of these - simultaneously. Therefore, solutions produced by Kyocera Mita be tested - Kyocera ECOSYS FS-1320D | PCL Barcode Flash 3.0 User's Manual - Page 17
the right file to the printer. Please observe the instructions in this regard at the Kyocera Mita customer service if a change between Type A and B or vice versa is necessary. Note Please note carefully the general tips on working with CF cards in your printer manual. This manual will also contain - Kyocera ECOSYS FS-1320D | PCL Barcode Flash 3.0 User's Manual - Page 18
Linedraw Code39_4 Code39_8 EAN_10mil EAN_13mil LetterGothic_10 LetterGothic_12 LetterGothic_17 USPS_ZIP OCR_A OCR_B OCR_B scal Startup ocr_a_9_land ocr_a_10_land ocr_a_9_port ocr_a_10_port ocr_b_12_ext_la ocr_b_12_land ocr_b_12_ext_po ocr_b_12_port Type B: /PRE/kmbc3-00-1 /PRE/kmbc3-00-1.inf /PRE/ - Kyocera ECOSYS FS-1320D | PCL Barcode Flash 3.0 User's Manual - Page 19
an overview of the partitions, print a partition list. Start printing this list using the front panel on the printer. Example of a partition list of Type A: The Device Information contains information on the physical size of the CF card and the memory used. The Partition Information lists print data - Kyocera ECOSYS FS-1320D | PCL Barcode Flash 3.0 User's Manual - Page 20
This information is technical in nature and the actual figures may vary depending on the software version. 20 - Kyocera ECOSYS FS-1320D | PCL Barcode Flash 3.0 User's Manual - Page 21
to be able to use the software You can optionally configure your printer via the front panel or the PRESCRIBE sequence !R! FRPO N8,1; EXIT; . Depending on how you are using it, it may sometimes be sensible (e.g. for testing purposes) to deactivate the software occasionally. You have two options for - Kyocera ECOSYS FS-1320D | PCL Barcode Flash 3.0 User's Manual - Page 22
A and Type B) !R! CALL BSTP;EXIT; . Note If any problems or errors occur, we recommend that you always print a status page. In this way, you can easily check whether the software and all the requisite fonts have been loaded. When you consult Support, you should always have a current status page to - Kyocera ECOSYS FS-1320D | PCL Barcode Flash 3.0 User's Manual - Page 23
in the chapter entitled, HARDWARE INSTALLATION, there is a Startup partition on the CF card. All data on this partition is automatically loaded when the printer is switched on and is immediately available. Therefore, all additional data which you would like to make available to users must be copied - Kyocera ECOSYS FS-1320D | PCL Barcode Flash 3.0 User's Manual - Page 24
3 Programming 3.1 General Kyocera Mita printers and multifunction devices are equipped as standard with a number of linear barcodes which can be controlled exclusively using the Kyocera language PRESCRIBE. The PCL Barcode Flash software extends the number of barcodes supported to include important - Kyocera ECOSYS FS-1320D | PCL Barcode Flash 3.0 User's Manual - Page 25
instructions assume a basic knowledge of PCL programming. If you are not yet confident with using this, we recommend that you read the manuals supported individually. If you would like to use one of the barcodes or matrix codes this may lead to unwanted printer behaviour. 3.2.1 Stop characters The - Kyocera ECOSYS FS-1320D | PCL Barcode Flash 3.0 User's Manual - Page 26
(ASCII 32) as the stop character even if the base data contains only numeric characters. Barcodes, which permit the space character in the printer which includes the number of the font that the printer is to use for further text from now on. Some barcodes allow all 256 characters of the ASCII code, - Kyocera ECOSYS FS-1320D | PCL Barcode Flash 3.0 User's Manual - Page 27
PCL Barcode Flash encounters incorrect base data, an error message is printed out instead of the barcode and below too in the case of two-dimensional codes), and you have to take this into account by right corner of the barcode symbol. See the PCL manual for how to position the cursor. Note In most - Kyocera ECOSYS FS-1320D | PCL Barcode Flash 3.0 User's Manual - Page 28
text, for example, or if the width and length in default form are already sufficient for the requirements of your application. Example with two bar widths, e.g. Code 39, enter two values, e.g. (s6,12b...; or in the case of a code with four bar widths, e.g. Code 128, enter four values, e.g. - Kyocera ECOSYS FS-1320D | PCL Barcode Flash 3.0 User's Manual - Page 29
p parameter Positioning of plain text 0 = Use default, cf. the defaults entered for the individual codes for this purpose 1 = no plain text Example: 2 = embedded beneath Example: 3 = half embedded beneath Example: 4 = beneath the barcode Example: 5 = above the barcode - Kyocera ECOSYS FS-1320D | PCL Barcode Flash 3.0 User's Manual - Page 30
h parameter Plain text font When you use the h parameter, this always requires a three-digit number, as you can see from the example above. First digit: Font style 1 = regular 2 = italics 3 = bold 4 = bold italics Second digit: Font size 0 = select automatically 1 = use previously selected size for - Kyocera ECOSYS FS-1320D | PCL Barcode Flash 3.0 User's Manual - Page 31
39 + Mod47 with check digit without space character Code 39 (3 of 9) with space character Code 39 + Mod47 with check digit with space character Code 39 Extended Code 39 Extended + Mod47 check digit Code 93 Code 93 Extended Code 128 autoswitch Code 128 Subset A Code 128 Subset B Code 128 Subset C UCC - Kyocera ECOSYS FS-1320D | PCL Barcode Flash 3.0 User's Manual - Page 32
any unwanted fonts are activated and the printer attempts to print your base data instead parameters, PCL Barcode Flash prints out an error message instead of the barcode symbol. the same in this mode. However, you can also replace the alternative Escape character with another character by means of - Kyocera ECOSYS FS-1320D | PCL Barcode Flash 3.0 User's Manual - Page 33
you would like to use one or more of the sequences mentioned in this section, you can either send these from the computer to the printer or - better in most cases - store them on the Compact Flash card in the "Startup" partition. Cf. the chapter on this partition. 33 - Kyocera ECOSYS FS-1320D | PCL Barcode Flash 3.0 User's Manual - Page 34
data. If you select too small a symbol, PCL Barcode Flash prints an error message instead of a symbol. If you do not make a selection, the , for example, for applications in which the size of the data to be coded varies, but where the same symbol size is always required for visual or legibility - Kyocera ECOSYS FS-1320D | PCL Barcode Flash 3.0 User's Manual - Page 35
the smallest square element of a symbol. "Symbol" refers to the combined modules in their entirety, mainly as squares or rectangles. PCL Barcode Flash supports Datamatrix only in accordance with the widely applied ECC200 procedure. Extended Channel Interpretation and Structured Append Mode are not - Kyocera ECOSYS FS-1320D | PCL Barcode Flash 3.0 User's Manual - Page 36
20 30 47 Example of a rectangular Datamatrix symbol (symbol no. 29) Datamatrix codes can be called with both PRESCRIBE and PCL commands. Syntax in PCL The T of the parameters, i.e. values outside the ranges mentioned below, an error message is printed instead of the Datamatrix symbol. T parameter: - Kyocera ECOSYS FS-1320D | PCL Barcode Flash 3.0 User's Manual - Page 37
15. If the data cannot be accommodated in symbol no. 15, an error message is printed instead of the symbol. 25,30h: The software selects large module sizes. If you do not enter a value, 10 is used as the default. v parameter: inversion 1 = Symbol is not printed inverted 2 = Symbol is printed - Kyocera ECOSYS FS-1320D | PCL Barcode Flash 3.0 User's Manual - Page 38
MANUAL". The BARC command is used. The syntax described in the PRESCRIBE manual for the BARC command is valid for the one-dimensional barcodes supported in the section entitled "Syntax in PCL". Type of coding 0 must always be entered. Error correction level 0 must always be entered. Amount of base - Kyocera ECOSYS FS-1320D | PCL Barcode Flash 3.0 User's Manual - Page 39
The amount of base data has to be stated only if the base data is passed in the first of the ways mentioned below: 1. By means of an attachment after the semicolon that closes the BARC command, in this case the number of bytes has to be stated. 2. In inverted commas. 3. By means of an attachment - Kyocera ECOSYS FS-1320D | PCL Barcode Flash 3.0 User's Manual - Page 40
be the case, one of the lines would not be filled with useful data and the useful data would be disrupted by non-printable characters (e.g. printer control sequences) during programming. The advantage of the variant with 120 is therefore that in applications with SAP, the division of the useful data - Kyocera ECOSYS FS-1320D | PCL Barcode Flash 3.0 User's Manual - Page 41
make your selection so that your data can be accommodated. If you select a version that is too small, the software prints an error message instead of the QR Code symbol. If you fail to make a selection, the software automatically selects the smallest possible version in which the base data can be - Kyocera ECOSYS FS-1320D | PCL Barcode Flash 3.0 User's Manual - Page 42
than No. 14. If, as in this example, the base data is not accommodated in version 14, PCL Barcode Flash prints out an error message instead of a QR Code symbol. This kind of range selection is useful, for example, for applications in which the size of the data being encoded varies, but - Kyocera ECOSYS FS-1320D | PCL Barcode Flash 3.0 User's Manual - Page 43
an error Code is available as model 1 and 2, where model 1 is only used in older applications. PCL Barcode Flash only supports the current model 2. International standards recommend only using model 2, which has been improved in a number of respects. If PCL Barcode Flash is given the instruction - Kyocera ECOSYS FS-1320D | PCL Barcode Flash 3.0 User's Manual - Page 44
higher than 30. If the data cannot be accommodated in version 30, an error message will be printed instead of the symbol. 1,15h: The software selects the Error correction level Possible values: 1= 7% 2 = 15 % 3 = 25 % 4 = 30 % If you do not specify the p parameter, then 15 % is used by default. - Kyocera ECOSYS FS-1320D | PCL Barcode Flash 3.0 User's Manual - Page 45
parameter, then 1 is used by default, i.e. not inverted. Examples: - Kyocera ECOSYS FS-1320D | PCL Barcode Flash 3.0 User's Manual - Page 46
from 0 to 4. For an explanation of the meaning of this parameter, cf. the explanatory notes on the s parameter in the section "SYNTAX IN PCL". Error correction level Values from 1 to 4. For an explanation of the meaning of this parameter, cf. the explanatory notes on the b parameter in the section - Kyocera ECOSYS FS-1320D | PCL Barcode Flash 3.0 User's Manual - Page 47
as address components, weight etc.). In contrast to the other 2D codes supported, the size of the individual modules as well as that of the locate it more rapidly. MaxiCode contains code words for the automatic correction of errors. All 256 ASCII characters can be coded as useful data. There is - Kyocera ECOSYS FS-1320D | PCL Barcode Flash 3.0 User's Manual - Page 48
for other barcodes. The data following this sequence are interpreted and coded as useful data for the MaxiCode. The subsequent escape sequence terminates the primary information should contain information concerning the shipment. The secondary information should contain information for purposes of - Kyocera ECOSYS FS-1320D | PCL Barcode Flash 3.0 User's Manual - Page 49
3 is generally used outside of the USA. 4. Postal code 5. Country code 6. Service class Secondary information The secondary information often begins with the this reason. All data should be entered in capital letters. The postal code may contain up to 9 digits in mode 2 (numerical) and up to 6 - Kyocera ECOSYS FS-1320D | PCL Barcode Flash 3.0 User's Manual - Page 50
8T Detailed explanation relative to this example: 1 = No. of symbol 1 = Number of symbols in this group 2 = MaxiCode mode 40670 = Postal code 840 = Country code 001 = Service class 1Z00004951 = Tracking number USPN = SCAC 06X610 = UPS Shipper number 159 = Julian day of pickup 50 - Kyocera ECOSYS FS-1320D | PCL Barcode Flash 3.0 User's Manual - Page 51
1234567 = Shipment 1/1 = Package x of y 10 = Package weight Y = Address validation OTTO-HAHN-STRASSE 12= Ship to address MEERBUSCH= Ship to city DE = Ship to state Syntax in PRESCRIBE To control the MaxiCode from PRESCRIBE, the commands XBCP and XBAR are used. The rules for the content of - Kyocera ECOSYS FS-1320D | PCL Barcode Flash 3.0 User's Manual - Page 52
error will, of course, occur if a value other than 1 is entered under XBCP 2,#. XBCP 4,#; # stands for the postal code. Depending on the mode (which has been entered in XBCP 1,#), a numerical or alphanumerical postal code quotation marks. The postal code may contain up to 9 digits in Service class - Kyocera ECOSYS FS-1320D | PCL Barcode Flash 3.0 User's Manual - Page 53
standard in all printers and normally creates PDF417 therein. The Barcode Flash solution adds MaxiCode to the PRESCRIBE command XBAR. 3.3.5 PDF417 PDF417 is a matrix code invented by Symbol Technologies. PDF stands for 'Portable Data File'. In contrast to the other 2D codes supported, the individual - Kyocera ECOSYS FS-1320D | PCL Barcode Flash 3.0 User's Manual - Page 54
the user. Nine levels are available (0-8), whereby level 0 means 'no error correction desired'. Depending on the application and on the quality of the paper used, however, a higher level should be used. All 256 ASCII characters can be coded as useful data. Example of a PDF417 symbol with 18 rows and - Kyocera ECOSYS FS-1320D | PCL Barcode Flash 3.0 User's Manual - Page 55
words. The barcode module uses this regardless of the size of the useful data. However, you also have the option of making the number of error correction words dependent on the size of the useful data. This is particularly useful if your application is designed to output different kinds of useful - Kyocera ECOSYS FS-1320D | PCL Barcode Flash 3.0 User's Manual - Page 56
values outside the ranges listed below, the barcode module outputs an error message in lieu of the PDF417 symbol. With certain sub-parameters relative apply as a maximum size, however. Please note that in this case an error message will be output in lieu of the symbol if the useful data encoded - Kyocera ECOSYS FS-1320D | PCL Barcode Flash 3.0 User's Manual - Page 57
symbol with the proportion of 2 to 3 as standard. As the remaining rules for the layout of the symbol also apply, these values are always only approximations. The Barcode Flash solution always selects the most appropriate value here. 3. Y-value for the proportion of the symbol (cf. sub-parameter 2). - Kyocera ECOSYS FS-1320D | PCL Barcode Flash 3.0 User's Manual - Page 58
3.3.6 Australia 4-state barcodes The Australia Post 4-state barcode was introduced to improve sorting results and to enable the accurate selection of individual postal items. Australia Post uses a unique eight character Delivery Point Identifier (DPID), which is allocated to each delivery address in - Kyocera ECOSYS FS-1320D | PCL Barcode Flash 3.0 User's Manual - Page 59
eight numeric characters and the customer information, which have to be separated from one another by a comma. The customer information may contain the following characters: - The digits 0 to 9, the uppercase letters A to Z, the space character and the special character #. - The barcode customer - Kyocera ECOSYS FS-1320D | PCL Barcode Flash 3.0 User's Manual - Page 60
Please note that no plain text is printed with the Australia 4-state barcode. Note BARC 45, 46, 47 and 48 cannot be called from PRESCRIBE macros. 60 - Kyocera ECOSYS FS-1320D | PCL Barcode Flash 3.0 User's Manual - Page 61
of detecting errors easier for you. The error messages are printed in plain text in a checked rectangle, e.g.: , or The following error messages exist: data or use a different barcode, which contains the character in its character set. If, for instance, the error message "Wrong char: 121" occurs, - Kyocera ECOSYS FS-1320D | PCL Barcode Flash 3.0 User's Manual - Page 62
character represented by two bytes occurred in the base data for the QR Code, the encoding of which did not conform to the rules of the JIS be separated from the customer information by a comma. The base data did not contain a comma. Wrong DPID Only eight-character digits are accepted as the DPID - Kyocera ECOSYS FS-1320D | PCL Barcode Flash 3.0 User's Manual - Page 63
. No Stop Letter You have specified an illegal character as the stop character for Codabar. Codabar only allows the letters A,B,C and D as stop characters. Internal error These errors should not really occur. Should any occur, then please contact your - Kyocera ECOSYS FS-1320D | PCL Barcode Flash 3.0 User's Manual - Page 64
the PRESCRIBE sequence !R! FRPO D4,3;EXIT; The Toner Save mode should not be used when printing barcodes. Where possible use white paper as this can enhance the contrast. Carefully test your application. Have you selected the best settings for your printer and in your programming and optimised them - Kyocera ECOSYS FS-1320D | PCL Barcode Flash 3.0 User's Manual - Page 65
3.6 Barcode Types 3.6.1 UPC-A Type / properties: Linear code Limitation: Plain text is only output in the default typeface in a set position below the code. Activation sequence: (s24600T For an explanation on selecting the stop character and the optional parameters, - Kyocera ECOSYS FS-1320D | PCL Barcode Flash 3.0 User's Manual - Page 66
3.6.2 UPC-A + a 2 digit extension Type / properties: Linear code Limitation: Plain text is only output in the default typeface in a set position below the code. Activation sequence: (s24601T For an explanation on selecting the stop character and the optional - Kyocera ECOSYS FS-1320D | PCL Barcode Flash 3.0 User's Manual - Page 67
is only output in the default typeface in a set position below the code. Activation sequence: (s24610T For an explanation on selecting the stop character and the optional parameters, see chapters 3.2.1. and 3.2.6. Default - parameters: v parameter 29 p parameter - Kyocera ECOSYS FS-1320D | PCL Barcode Flash 3.0 User's Manual - Page 68
3.6.4 UPC-E + a 2 digit extension Type / properties: Linear code Limitation: Plain text is only output in the default typeface in a set position below the code. Activation sequence: (s24611T For an explanation on selecting the stop character and the optional - Kyocera ECOSYS FS-1320D | PCL Barcode Flash 3.0 User's Manual - Page 69
3.6.5 EAN/JAN-8 Type / properties: Linear code Limitation: Plain text is only output in the default typeface in a set position below the code. Activation sequence: (s24620T For an explanation on selecting the stop character and the optional parameters, see chapters - Kyocera ECOSYS FS-1320D | PCL Barcode Flash 3.0 User's Manual - Page 70
3.6.6 EAN/JAN-8 + a 2 digit extension Type / properties: Linear code Limitation: Plain text is only output in the default typeface in a set position below the code. Activation sequence: (s24621T For an explanation on selecting the stop character and the optional - Kyocera ECOSYS FS-1320D | PCL Barcode Flash 3.0 User's Manual - Page 71
3.6.7 EAN/JAN-8 + a 5 digit extension Type / properties: Linear code Limitation: Plain text is only output in the default typeface in a set position below the code. Activation sequence: (s24622T For an explanation on selecting the stop character and the optional - Kyocera ECOSYS FS-1320D | PCL Barcode Flash 3.0 User's Manual - Page 72
3.6.8 EAN/JAN-13 Type / properties: Linear code Limitation: Plain text is only output in the default typeface in a set position below the code. Activation sequence: (s24630T For an explanation on selecting the stop character and the optional parameters, see chapters - Kyocera ECOSYS FS-1320D | PCL Barcode Flash 3.0 User's Manual - Page 73
3.6.9 EAN/JAN-13 + a 2 digit extension Type / properties: Linear code Limitation: Plain text is only output in the default typeface in a set position below the code. Activation sequence: (s24631T For an explanation on selecting the stop character and the optional - Kyocera ECOSYS FS-1320D | PCL Barcode Flash 3.0 User's Manual - Page 74
3.6.10 EAN/JAN-13 + a 5 digit extension Type / properties: Linear code Limitation: Plain text is only output in the default typeface in a set position below the code. Activation sequence: (s24632T For an explanation on selecting the stop character and the optional - Kyocera ECOSYS FS-1320D | PCL Barcode Flash 3.0 User's Manual - Page 75
3.6.11 Interleaved 2 of 5 Type / properties: Linear code Activation sequence: (s24640T For an explanation on selecting the stop character and the optional parameters, see chapters 3.2.1. and 3.2.6. Default - parameters: v parameter p parameter b parameter Additional - Kyocera ECOSYS FS-1320D | PCL Barcode Flash 3.0 User's Manual - Page 76
12 Interleaved 2 of 5 with check digit Type / properties: Linear code Activation sequence: (s24641T For an explanation on selecting the stop character and the optional parameters, see chapters 3.2.1. and 3.2.6. Default - parameters: v parameter p parameter b parameter - Kyocera ECOSYS FS-1320D | PCL Barcode Flash 3.0 User's Manual - Page 77
2 of 5 (25) Type / properties: Linear code Activation sequence: (s24650T For an explanation on selecting the stop character and the optional parameters, see chapters 3.2.1. and 3.2.6. Default - parameters: v parameter p parameter b parameter Additional properties - Kyocera ECOSYS FS-1320D | PCL Barcode Flash 3.0 User's Manual - Page 78
3.6.14 Industrial 2 of 5 (25) with check digit Type / properties: Linear code Activation sequence: (s24651T For an explanation on selecting the stop character and the optional parameters, see chapters 3.2.1. and 3.2.6. Default - parameters: v parameter p parameter b - Kyocera ECOSYS FS-1320D | PCL Barcode Flash 3.0 User's Manual - Page 79
3.6.15 Matrix 2 of 5 Type / properties: Linear code Activation sequence: (s24660T For an explanation on selecting the stop character and the optional parameters, see chapters 3.2.1. and 3.2.6. Default - parameters: v parameter p parameter b parameter Additional - Kyocera ECOSYS FS-1320D | PCL Barcode Flash 3.0 User's Manual - Page 80
3.6.16 Matrix 2 of 5 with check digit Type / properties: Linear code Activation sequence: (s24661T For an explanation on selecting the stop character and the optional parameters, see chapters 3.2.1. and 3.2.6. Default - parameters: v parameter p parameter b parameter - Kyocera ECOSYS FS-1320D | PCL Barcode Flash 3.0 User's Manual - Page 81
9) without space character Type / properties: Linear code Activation sequence: (s24670T For an explanation on selecting the stop character and the optional parameters, see chapters 3.2.1. and 3.2.6. Default - parameters: v parameter 29 p parameter 1 b parameter - Kyocera ECOSYS FS-1320D | PCL Barcode Flash 3.0 User's Manual - Page 82
with space character Type / properties: Linear code Activation sequence: (s24672T For an explanation on selecting the stop character and the optional parameters, see chapters 3.2.1. and 3.2.6. Default - parameters: v parameter 29 p parameter 1 b parameter 6,18 - Kyocera ECOSYS FS-1320D | PCL Barcode Flash 3.0 User's Manual - Page 83
39 + Mod47 with check digit without space character Type / properties: Linear code Activation sequence: (s24671T For an explanation on selecting the stop character and the optional parameters, see chapters 3.2.1. and 3.2.6. Default - parameters: v parameter 29 - Kyocera ECOSYS FS-1320D | PCL Barcode Flash 3.0 User's Manual - Page 84
3.6.20 Code 39 + Mod47 with check digit with space character Type / properties: Linear code Activation sequence: (s24673T For an explanation on selecting the stop character and the optional parameters, see chapters 3.2.1. and 3.2.6. Default - parameters: v - Kyocera ECOSYS FS-1320D | PCL Barcode Flash 3.0 User's Manual - Page 85
Extended Type / properties: Linear code Activation sequence: (s24680T For an explanation on selecting the stop character and the optional parameters, see chapters 3.2.1. and 3.2.6. Default - parameters: v parameter 29 p parameter 1 b parameter 6,18 Additional - Kyocera ECOSYS FS-1320D | PCL Barcode Flash 3.0 User's Manual - Page 86
3.6.22 Code 39 Extended + Mod47 check digit Type / properties: Linear code Activation sequence: (s24681T For an explanation on selecting the stop character and the optional parameters, see chapters 3.2.1. and 3.2.6. Default - parameters: v parameter 29 p - Kyocera ECOSYS FS-1320D | PCL Barcode Flash 3.0 User's Manual - Page 87
93 Type / properties: Linear code Activation sequence: (s24690T For an explanation on selecting the stop character and the optional parameters, see chapters 3.2.1. and 3.2.6. Default - parameters: v parameter 29 p parameter 1 b parameter 6,12,18,24 Additional - Kyocera ECOSYS FS-1320D | PCL Barcode Flash 3.0 User's Manual - Page 88
93 Extended Type / properties: Linear code Activation sequence: (s24691T For an explanation on selecting the stop character and the optional parameters, see chapters 3.2.1. and 3.2.6. Default - parameters: v parameter 29 p parameter 1 b parameter 6,12,18,24 - Kyocera ECOSYS FS-1320D | PCL Barcode Flash 3.0 User's Manual - Page 89
128 autoswitch Type / properties: Linear code Activation sequence: (s24700T For an explanation on selecting the stop character and the optional parameters, see chapters 3.2.1. and 3.2.6. Default - parameters: v parameter p parameter b parameter Additional properties - Kyocera ECOSYS FS-1320D | PCL Barcode Flash 3.0 User's Manual - Page 90
128 Subset A Type / properties: Linear code Activation sequence: (s24701T For an explanation on selecting the stop character and the optional parameters, see chapters 3.2.1. and 3.2.6. Default - parameters: v parameter p parameter b parameter Additional properties - Kyocera ECOSYS FS-1320D | PCL Barcode Flash 3.0 User's Manual - Page 91
128 Subset B Type / properties: Linear code Activation sequence: (s24702T For an explanation on selecting the stop character and the optional parameters, see chapters 3.2.1. and 3.2.6. Default - parameters: v parameter p parameter b parameter Additional properties - Kyocera ECOSYS FS-1320D | PCL Barcode Flash 3.0 User's Manual - Page 92
128 Subset C Type / properties: Linear code Activation sequence: (s24704T For an explanation on selecting the stop character and the optional parameters, see chapters 3.2.1. and 3.2.6. Default - parameters: v parameter p parameter b parameter Additional properties - Kyocera ECOSYS FS-1320D | PCL Barcode Flash 3.0 User's Manual - Page 93
3.6.29 UCC-128 Type / properties: Linear code Activation sequence: (s24710T For an explanation on selecting the stop character and the optional parameters, see chapters 3.2.1. and 3.2.6. Default - parameters: v parameter 29 p parameter 1 b parameter 6,12,18,24 - Kyocera ECOSYS FS-1320D | PCL Barcode Flash 3.0 User's Manual - Page 94
3.6.30 EAN-128 Type / properties: Linear code Activation sequence: (s24720T For an explanation on selecting the stop character and the optional parameters, see chapters 3.2.1. and 3.2.6. Default - parameters: v parameter 29 p parameter 1 b parameter 6,12,18,24 - Kyocera ECOSYS FS-1320D | PCL Barcode Flash 3.0 User's Manual - Page 95
3.6.31 Codabar Type / properties: Linear code Activation sequence: (s24750T For an explanation on selecting the stop character and the optional parameters, see chapters 3.2.1. and 3.2.6. Default - parameters: v parameter p parameter b parameter Additional properties: - Kyocera ECOSYS FS-1320D | PCL Barcode Flash 3.0 User's Manual - Page 96
3.6.32 Codabar + Mod16 check digit Type / properties: Linear code Activation sequence: (s24751T For an explanation on selecting the stop character and the optional parameters, see chapters 3.2.1. and 3.2.6. Default - parameters: v parameter p parameter b parameter - Kyocera ECOSYS FS-1320D | PCL Barcode Flash 3.0 User's Manual - Page 97
3.6.33 MSI Plessey Type / properties: Linear code Limitation: Plain text is only output in the default typeface in a set position below the code, which means that the h parameter does not have any effect and in the case of the p parameter only the values 1 and 4 are allowed. Activation sequence: < - Kyocera ECOSYS FS-1320D | PCL Barcode Flash 3.0 User's Manual - Page 98
3.6.34 MSI Plessey + Mod10 check digit Type / properties: Linear code Limitation: Plain text is only output in the default typeface in a set position below the code, which means that the h parameter does not have any effect and in the case of the p parameter only the values 1 and 4 are allowed. - Kyocera ECOSYS FS-1320D | PCL Barcode Flash 3.0 User's Manual - Page 99
3.6.35 MSI Plessey + Mod10 + Mod10 check digit Type / properties: Linear code Limitation: Plain text is only output in the default typeface in a set position below the code, which means that the h parameter does not have any effect and in the case of the p parameter only the values 1 and 4 are - Kyocera ECOSYS FS-1320D | PCL Barcode Flash 3.0 User's Manual - Page 100
3.6.36 MSI Plessey + Mod10 + Mod10 check digit Type / properties: Linear code Limitation: Plain text is only output in the default typeface in a set position below the code, which means that the h parameter does not have any effect and in the case of the p parameter only the values 1 and 4 are - Kyocera ECOSYS FS-1320D | PCL Barcode Flash 3.0 User's Manual - Page 101
, used in postal traffic within the U.S.A. Limitation: Plain text is not recommended. This code can only output plain text in the default typeface in a set position below the code. Activation sequence: (s24770T For an explanation on selecting the stop character and - Kyocera ECOSYS FS-1320D | PCL Barcode Flash 3.0 User's Manual - Page 102
, used in postal traffic within the U.S.A. Limitation: Plain text is not recommended. This code can only output plain text in the default typeface in a set position below the code. Activation sequence: (s24771T For an explanation on selecting the stop character and - Kyocera ECOSYS FS-1320D | PCL Barcode Flash 3.0 User's Manual - Page 103
, used in postal traffic within the U.S.A. Limitation: Plain text is not recommended. This code can only output plain text in the default typeface in a set position below the code. Activation sequence: (s24772T For an explanation on selecting the stop character and - Kyocera ECOSYS FS-1320D | PCL Barcode Flash 3.0 User's Manual - Page 104
3.6.40 Datamatrix Printing examples: The following text is printed out with different parameters as the DataMatrix symbol: 'Data Matrix is a two-dimensional matrix symbology which is made up of square modules arranged within a perimeter finder pattern that is used for finding the symbol and - Kyocera ECOSYS FS-1320D | PCL Barcode Flash 3.0 User's Manual - Page 105
is printed out with different parameters as the QR Code symbol: 'QR CODE IS A MATRIX SYMBOLOGY CONSISTING OF AN ARRAY OF WIDE RANGE OF SIZES OF SYMBOL IS PROVIDED FOR TOGETHER WITH FOUR LEVELS OF ERROR CORRECTION. MODULE DIMENSIONS ARE USER-SPECIFIED TO ENABLE SYMBOL PRODUCTION BY A WIDE VARIETY - Kyocera ECOSYS FS-1320D | PCL Barcode Flash 3.0 User's Manual - Page 106
Expanding typefaces PCL Barcode Flash expands the integrated default printer typefaces to include Letter Gothic, Line Draw some Microsoft Windows standard printer drivers, and Kyocera Mita devices can now be used for this too. 3.7.1 Checking Typefaces It is possible to check that the typefaces work - Kyocera ECOSYS FS-1320D | PCL Barcode Flash 3.0 User's Manual - Page 107
pair of commands, CSET and FSET (CSET and FSET should always be used together as otherwise the font activation cannot be correctly recognised by the printer). The zero character is displayed as 0 and it should not be confused with the letter O! Barcode 3 of 9; 8.1 cpi; 12 point: FONT 830; or CSET 0Y - Kyocera ECOSYS FS-1320D | PCL Barcode Flash 3.0 User's Manual - Page 108
3.7.3 Activating fonts using a PCL command In the PCL emulation of Kyocera Mita devices, the fonts can also be selected using the corresponding PCL command. The Escape character (ASCII character 27 in decimal or 1B in hexadecimal is - Kyocera ECOSYS FS-1320D | PCL Barcode Flash 3.0 User's Manual - Page 109
3.7.4 Examples Print out a barcode 39 with PRESCRIBE: !R! FONT 831; TEXT "*0987654321*"; PAGE; EXIT; ("*" required as the start and stop character) Print out of a UPC barcode with ORC-A script embedded below in PCL: [cr][lf] [esc](8Y[esc](s1p12v0s0b0T(012345-GHIJAF([cr][lf] (012345-GHIJAF([cr][ - Kyocera ECOSYS FS-1320D | PCL Barcode Flash 3.0 User's Manual - Page 110
iso.ch It is generally recommended that you familiarise yourself with the following official manuals, which are normally included on CD as a PDF document with every Kyocera Mita device: - PRESCRIBE IIe Programming Manual (English) - PDF417 Two Dimensional Bar Code Implementation Manual (English) 110 - Kyocera ECOSYS FS-1320D | PCL Barcode Flash 3.0 User's Manual - Page 111
111 v.3.0 EN 07-2008
PCL Barcode Flash 3.0
User Manual