Kyocera ECOSYS M2035dn ECOSYS M2030dn/M2035dn/M2530dn/M2535dn Operation Guide - Page 404
Send error., Error Message, Check Points, Corrective Actions, Reference
View all Kyocera ECOSYS M2035dn manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 404 highlights
Error Message Send error. #### Check Points - Troubleshooting Corrective Actions Reference Page An error has occurred during transmission. The possible error codes and their descriptions are as follows. 1101: The server name of the SMTP server is not set correctly or the host name is incorrect when sending scan data to an FTP server. Use Command Center RX and register the SMTP server name and the host name correctly. 1102: The login user name is incorrect or the domain name has not been entered. Enter login user name, domain name and password correctly. 1103: The network path name is incorrect or you do not have access to the folder specified. Use - Command Center RX and register the path name correctly. 1104: No recipient address. Enter E- mail address correctly. 1105: E-mail - The SMTP protocol setting is turned off. Use Command Center RX and turn on the SMTP protocol setting. Scan to PC (SMB) - SMB setting is turned off. Use Command Center RX and turn on the SMB setting. Scan to PC (FTP) - FTP setting is turned off. Use Command Center RX and turn on the FTP setting. 1106: The sender address setting under E-mail: SMTP is not registered. Use Command Center RX and register the sender address. 10-10