Kyocera FS 1010 KX Driver Operation Guide Rev. 1.3.1

Kyocera FS 1010 - B/W Laser Printer Manual

Get Kyocera FS 1010 - B/W Laser Printer PDF manuals and user guides View all Kyocera FS 1010 manuals
Add to My Manuals
Save this manual to your list of manuals

Kyocera FS 1010 manual content summary:

  • Kyocera FS 1010 | KX Driver Operation Guide Rev. 1.3.1 - Page 1
    Kyocera Extended Driver User Guide
  • Kyocera FS 1010 | KX Driver Operation Guide Rev. 1.3.1 - Page 2
    this guide are for the Windows XP printing environment. Essentially the same operations are used for Windows 95/98/Me/2000 environments. Models supported by the KX printer driver Copier/MFP Printers KM- 1510 KM- 1530 KM- 1810 KM- 1815 KM- 1820 / FS- 1118MFP KM- 2030 KM- 2530 KM- 2550 KM- 3035 KM
  • Kyocera FS 1010 | KX Driver Operation Guide Rev. 1.3.1 - Page 3
    1 Installation ...1 Installing the Printer Driver in Windows 1 Local Connection ...1 USB Connection ...7 Network Connection ...14 LPR Connection ...18 Installing Components ...25 Installing the Latest Printer Driver 27 Chapter 2 Printer Properties 29 Accessing Printer Properties ...29 Installing
  • Kyocera FS 1010 | KX Driver Operation Guide Rev. 1.3.1 - Page 4
    Mode ...107 Rotate Collate ...108 Job Settings ...108 Quick Copy ...109 Printing the Remaining Copies of Proof and Hold Jobs 111 Private Print ...111 Printing Private Print Jobs ...112 Job Storage ...112 Printing Jobs Saved Using Job Storage 113 Virtual Mailbox ...113 Temporary and Permanent Jobs
  • Kyocera FS 1010 | KX Driver Operation Guide Rev. 1.3.1 - Page 5
    1 Installation Installing the Printer Driver in Windows A printer driver is an application that sends documents to the printer. Install the printer driver from the supplied Kyocera Software Library CD-ROM. Once installed, a variety of printer settings can be configured. NOTE In Windows XP or 2000
  • Kyocera FS 1010 | KX Driver Operation Guide Rev. 1.3.1 - Page 6
    printer is ready to print (remove packing materials, insert paper and any toner or ink cartridges) before connecting the cable. • For further details on connecting using a parallel cable, refer to the printer's Operation Guide drive, navigate to Windows Explorer, access the CD-ROM, and double-click the
  • Kyocera FS 1010 | KX Driver Operation Guide Rev. 1.3.1 - Page 7
    6 Click Install KX Driver. Installation 7 The Welcome to the Kyocera Printer Installation Wizard dialog box appears. Click Next. 8 The Local or Network Connection dialog box appears. Select Local connection, and click Next. 3
  • Kyocera FS 1010 | KX Driver Operation Guide Rev. 1.3.1 - Page 8
    click Next. • If the Found New Hardware dialog box appears, click Cancel. • If the Hardware Installation warning dialog box appears, click Continue Anyway. • If the Network Printer Port Monitor dialog box appears, select Yes to install an e-mail printer port for network printing and click Next. 4
  • Kyocera FS 1010 | KX Driver Operation Guide Rev. 1.3.1 - Page 9
    dialog box appears. Select LPT1: from Use the following port:, and then click Next. 11 The Name Your Printer dialog box appears. Select Yes or No to use the printer as the default printer for Windows-based programs. Click Next. 12 The Printer Sharing dialog box appears. If you do not want to share
  • Kyocera FS 1010 | KX Driver Operation Guide Rev. 1.3.1 - Page 10
    the test page does not print properly, click Troubleshoot to determine the problem. • Select No if you do not wish to print a test page and click Next. 14 The Confirm Settings dialog box appears. Verify the settings and click Install. The printer driver installation begins. 15 Once the installation
  • Kyocera FS 1010 | KX Driver Operation Guide Rev. 1.3.1 - Page 11
    power on both devices. NOTE • Ensure the printer is ready to print (remove packing materials, insert paper and any toner or ink cartridges) before connecting the cable. • For further details on connecting using a USB cable, refer to the printer's Operation Guide. • If the Welcome to the Found New
  • Kyocera FS 1010 | KX Driver Operation Guide Rev. 1.3.1 - Page 12
    If the installation program fails to launch after inserting the CD-ROM into the CD drive, navigate to Windows Explorer, access the CD-ROM, and double-click the Setup.exe file. 6 Click Install KX Driver. 7 The Welcome to the Kyocera Printer Installation Wizard dialog box appears. Click Next. 8
  • Kyocera FS 1010 | KX Driver Operation Guide Rev. 1.3.1 - Page 13
    Installation 8 The Local or Network Connection dialog box appears. Select Local Connection and click Next. 9 The Select Printer Model dialog box appears. From the list, select the Manufacturer and corresponding Printers you wish to connect, and click Next. NOTE • If Found New Hardware dialog box
  • Kyocera FS 1010 | KX Driver Operation Guide Rev. 1.3.1 - Page 14
    • If the Network Printer Port Monitor dialog box appears, select Yes and then click Next. 10 The Select the Printer Port dialog box appears. Select USB port (for example, USB001 or KMUSB001) from the listed ports, then click Next and proceed to step 14. If there are no USB ports listed under Use the
  • Kyocera FS 1010 | KX Driver Operation Guide Rev. 1.3.1 - Page 15
    new port type list, then click Next. 12 The KM USB Port monitor dialog box appears. Confirm the Port name and click Advanced... . 13 The Serial number list appears. Confirm the serial number and click OK. If the Serial number list is blank, cancel the installation procedure. Turn off the printer and
  • Kyocera FS 1010 | KX Driver Operation Guide Rev. 1.3.1 - Page 16
    one of the following options. • Select Yes (recommended) to print a test page to confirm the proper operation of your printer and click Next. If the test page does not print properly, click Troubleshoot to determine the problem. • Select No if you do not wish to print a test page, and click Next. 12
  • Kyocera FS 1010 | KX Driver Operation Guide Rev. 1.3.1 - Page 17
    Installation 17 The Confirm Settings dialog box appears. Verify the printer settings and click Install. The printer driver installation begins. 18 Once the installation is complete, the Printer Installed Successfully dialog box appears. Choose from one of the following options. • Select Yes (
  • Kyocera FS 1010 | KX Driver Operation Guide Rev. 1.3.1 - Page 18
    network cable. Once connected, turn on both devices. NOTE • Ensure the printer is ready to print (remove packing materials, insert paper and any toner or ink cartridges) before connecting the cable. • For further details on connecting using a parallel cable, refer to the printer's Operation Guide
  • Kyocera FS 1010 | KX Driver Operation Guide Rev. 1.3.1 - Page 19
    Installation 4 Click View License Agreement to display and read the License Agreement. 5 Click Accept to proceed to the Main Menu dialog box. 6 Click Install KX Driver. 7 The Welcome to the Kyocera Printer Installation Wizard dialog box appears. Click Next. 15
  • Kyocera FS 1010 | KX Driver Operation Guide Rev. 1.3.1 - Page 20
    . Select one of the following search methods: • Type the printer name...: Leave the printer name blank and click Next. All printers available on network servers appear. If you have directly typed in the print server name, click Next. • Connect to a printer on the Internet or...: Search by URL for
  • Kyocera FS 1010 | KX Driver Operation Guide Rev. 1.3.1 - Page 21
    Select Yes or No to determine whether to apply the selected printer as the default printer for all Windows-based applications. 11 The Confirm Settings dialog box appears. Verify the printer settings and click Install. The printer driver installation begins. 12 Once the installation is complete, the
  • Kyocera FS 1010 | KX Driver Operation Guide Rev. 1.3.1 - Page 22
    power on both devices. NOTE • Ensure the printer is ready to print (remove packing materials, insert paper and any toner or ink cartridges) before connecting the cable. • For further details on connecting using a network cable, refer to the printer's Operation Guide. • If the Welcome to the Found
  • Kyocera FS 1010 | KX Driver Operation Guide Rev. 1.3.1 - Page 23
    If the installation program fails to launch after inserting the CD-ROM into the CD drive, navigate to Windows Explorer, access the CD-ROM, and double-click the Setup.exe file. 6 Click Install KX Driver. 7 The Welcome to the Kyocera Printer Installation Wizard dialog box appears. Click Next. 19
  • Kyocera FS 1010 | KX Driver Operation Guide Rev. 1.3.1 - Page 24
    . NOTE For further details on connecting a network printing environment, refer to the IB21E/IB-22 User's Manual on the CD-ROM supplied with your printer. 9 The Select Printer Model dialog box appears. From the list, select the Manufacturer and corresponding Printers you wish to connect, and click
  • Kyocera FS 1010 | KX Driver Operation Guide Rev. 1.3.1 - Page 25
    • If the Network Printer Port Monitor dialog box appears, select Yes and click Next. 10 The Select the Printer Port dialog box appears. Select KPrint Port: from the Create a new port: Type list, and then click Next. 11 The KPrint Add Port Wizard dialog box appears. Select Print using LPR (Line
  • Kyocera FS 1010 | KX Driver Operation Guide Rev. 1.3.1 - Page 26
    print server dialog box, enter the IP Address or Host Name and click Next. • Click Search... if the IP Address or Host Name is not known. A list of available network printers displays. Select the network printer, then click OK. Click Next to continue. 13 Confirm the destination printer port name
  • Kyocera FS 1010 | KX Driver Operation Guide Rev. 1.3.1 - Page 27
    one of the following options. • Select Yes (recommended) to print a test page to confirm the proper operation of your printer and click Next. If the test page does not print properly, click Troubleshoot to determine the problem. • Select No if you do not wish to print a test page, and click Next. 23
  • Kyocera FS 1010 | KX Driver Operation Guide Rev. 1.3.1 - Page 28
    wish to install optional components and click Next. 20 The Printer Installed Successfully dialog box. Choose from one of the following options. • Select Yes and click Next to install additional printer drivers. The New Printer Installation dialog box appears. • Select No to complete the installation
  • Kyocera FS 1010 | KX Driver Operation Guide Rev. 1.3.1 - Page 29
    functions of your printer driver by installing components that compliment the ways in which you utilize your printer. For more information on profiles, refer to Saving Profiles on page 125. The displayed components may vary based on the printer model. NOTE To install Printer Components: 1 Once the
  • Kyocera FS 1010 | KX Driver Operation Guide Rev. 1.3.1 - Page 30
    instructions in the dialog box to proceed. • The Confirm Settings dialog box appears. Verify the selected component items, and click Install. 3 The Printer • Select Yes to install additional printer drivers, and then click Next. Refer to the Local and Network Connection dialog box shown in the
  • Kyocera FS 1010 | KX Driver Operation Guide Rev. 1.3.1 - Page 31
    Latest Printer Driver The latest Kyocera printer driver can be obtained from http://www.kyoceramita.com/ download/, and can be installed using the Windows Add Printer Wizard. To install using the Add Printer Wizard This section describes how to install a printer driver using the Add Printer Wizard
  • Kyocera FS 1010 | KX Driver Operation Guide Rev. 1.3.1 - Page 32
    the instructions. 4 When the Completing the Add Printer Wizard dialog box appears, click Finish. 5 The Hardware Installation dialog box appears and the Hardware Installation warning message may display. If the warning message appears, click Continue Anyway. Installation of the printer driver is
  • Kyocera FS 1010 | KX Driver Operation Guide Rev. 1.3.1 - Page 33
    Optional Devices • User Settings • Page Description Language (PDL) Settings • Administrator Settings • Compatibility Settings Follow the steps below to set your preferred options as the default settings.These printer settings can be changed temporarily when printing from within other Windows-based
  • Kyocera FS 1010 | KX Driver Operation Guide Rev. 1.3.1 - Page 34
    (Page Description Language) settings for the user, administrator settings for front panel messages, passwords, and more. NOTE The printer pictured in the Printer Properties dialog box and the list of Device Options will vary depending on the printer you have. To install optional devices: 1 Click
  • Kyocera FS 1010 | KX Driver Operation Guide Rev. 1.3.1 - Page 35
    box if a device listing is already enabled. • The Hard Disk Settings dialog box appears if you select the Hard Disk option, enabling printer. This setting is required to optimize the downloading of printer fonts. Punch Settings Select the check box for the finishing device the Device Options list
  • Kyocera FS 1010 | KX Driver Operation Guide Rev. 1.3.1 - Page 36
    device listing is already enabled, double-click on it to display the Punch Unit Setting dialog box. Select the 2 Hole, 2 & 3 Hole, or 4 Hole option depending on the optional punch unit of your finisher to enable punching of the pages you print. Assigning Virtual If you enable the Hard Disk check
  • Kyocera FS 1010 | KX Driver Operation Guide Rev. 1.3.1 - Page 37
    as a hard disk saving print requests into the printer's memory if a hard disk for printing is not installed. When a hard disk is installed on the printer operator panel. For further details, consult the printer's Operation Guide. To change RAM Disk setting: 1 In the Device Options list, enable the
  • Kyocera FS 1010 | KX Driver Operation Guide Rev. 1.3.1 - Page 38
    Settings tab. • Identification • Unit of Measurement • Language Preference Selection • Simplified User Interface (printer FS-1018 only) Identification You can display the user information for the current print job on the printer operator panel. For further details, refer to Job Name Display on
  • Kyocera FS 1010 | KX Driver Operation Guide Rev. 1.3.1 - Page 39
    , Sharing, Ports, Advanced, Color Management, and Security. Select the Language Preference check box and select the preferred language from the Language Preferences list. To activate the new language, click OK in the User Settings and Properties dialog box. Simplified User Interface For printer FS
  • Kyocera FS 1010 | KX Driver Operation Guide Rev. 1.3.1 - Page 40
    PDLs may vary. You can choose from PCL (Printer Control Language) XL, PCL 5e, PCL 5c, or KPDL. We recommend PCL XL. If you select one of the PDLs options, the selection appears in the lower corner of the 3-D image. If you receive a PDL printing error, select a different PDL and try again. 1 On
  • Kyocera FS 1010 | KX Driver Operation Guide Rev. 1.3.1 - Page 41
    list. Refer to the table below for options and descriptions. PCL XL Options PCL XL (monochrome and color printers) PCL 5c (color printers) PCL 5e (monochrome printers) KPDL (color and monochrome printers when printing from applications that support PostScript 2 or 3. An optional KPDL upgrade kit
  • Kyocera FS 1010 | KX Driver Operation Guide Rev. 1.3.1 - Page 42
    KPDL Options Allow Data Passthrough Allow Native TrueType Download Administrator Settings Descriptions Reduces errors when printing complex jobs from applications that use the PostScript format. Improves the print quality and speed when using TrueType fonts. The following settings can be
  • Kyocera FS 1010 | KX Driver Operation Guide Rev. 1.3.1 - Page 43
    application to the printer driver or it can be selected in the Job Settings dialog box before printing. Displays the user name during printing. The user name is the information entered according to the instructions in Identification on page 34. Displays the user group during printing. The group name
  • Kyocera FS 1010 | KX Driver Operation Guide Rev. 1.3.1 - Page 44
    the Lock these Settings check box to access the Set Password dialog box. 2 In the Set Password dialog box, enter the new password in the New password field. Re-enter the password in the Confirm new password field and click OK. The password must be between 4 to 16 characters. NOTE To change the
  • Kyocera FS 1010 | KX Driver Operation Guide Rev. 1.3.1 - Page 45
    39 to enter a new password. Compatibility Settings This feature allows you to change values for media sources, such as cassettes or the MultiPurpose Feeder, so that the Kyocera Extended Driver is compatible with previous drivers of other manufacturers or older Kyocera printers. This alignment of old
  • Kyocera FS 1010 | KX Driver Operation Guide Rev. 1.3.1 - Page 46
    Source Enumeration area, select the paper supply method. The current value is listed in the Enumerated Value box. 3 Enter the new value for the Enumerated Value and click Apply. You can also restore all the parameters to the default by clicking Reset. 4 Select the Disable Face-up Reverse Page Order
  • Kyocera FS 1010 | KX Driver Operation Guide Rev. 1.3.1 - Page 47
    updates the Device Options list on the Device Settings properties page. Auto Configure keeps the printer driver's Device settings consistent with the actual printer devices. Auto Configure currently supports these ports for Windows operating systems: • Windows 98 & ME - KPrint ports (Raw mode, LPR
  • Kyocera FS 1010 | KX Driver Operation Guide Rev. 1.3.1 - Page 48
    appear. The check box settings on the Device Options list will be changed and the 3D image will be updated the settings in the Windows Firewall to allow communication between the printer and your computer. The default setting for Windows XP Service Pack 2 is for the Windows Firewall to be set to
  • Kyocera FS 1010 | KX Driver Operation Guide Rev. 1.3.1 - Page 49
    Security alert shown above appears, click Unblock to allow communication between the printer and your computer. When you click Unblock, Auto Configure is added to the Windows Firewall exception list, as shown in the example below. The Windows Firewall is accessed through the Control Panel. 45
  • Kyocera FS 1010 | KX Driver Operation Guide Rev. 1.3.1 - Page 50
    46
  • Kyocera FS 1010 | KX Driver Operation Guide Rev. 1.3.1 - Page 51
    describes the following printing tasks when printing from Microsoft Windows applications. • Basic Printing Tasks • Duplex Printing • Reverse Order Printing • Printing Watermarks • Adjusting Image Settings • Adjusting Color Basic Printing Tasks The steps required to print a document created with
  • Kyocera FS 1010 | KX Driver Operation Guide Rev. 1.3.1 - Page 52
    Name to open a list of installed printers. Select the desired printer. 4 Specify the number of copies to print in the Number of copies field. You can print up to 999 copies. When printing two or more copies, enable the Collate check box for collation. NOTE If Ignore Application Collation is
  • Kyocera FS 1010 | KX Driver Operation Guide Rev. 1.3.1 - Page 53
    Printing from Applications 5 Click OK. 6 Click Properties... to access the Properties dialog box. 7 On the Media tab, click the Page Size list and select the appropriate page size. 49
  • Kyocera FS 1010 | KX Driver Operation Guide Rev. 1.3.1 - Page 54
    paper (the back side of paper which has already been printed on), click the Media Type list and select the media type. For further details, refer to Matching the Paper Size before Printing on page 53. • The printer automatically selects paper size that matches the size specified above. A message
  • Kyocera FS 1010 | KX Driver Operation Guide Rev. 1.3.1 - Page 55
    to the original page size. Refer to Scaling on page 52. • Select Same as Page Size in the Print Size list to restore the output page size. Printing Multiple Pages Per Sheet You can print by arranging multiple pages of the source document on a single sheet of paper. When this function is enabled
  • Kyocera FS 1010 | KX Driver Operation Guide Rev. 1.3.1 - Page 56
    2 Specify the number of source pages in the Pages per Sheet list. You can select the horizontal direction for the page layout using Layout (Sequence). NOTE • If you select four pages per sheet, then four pages are printed on a single sheet as shown in the dialog box in the example above. If AUTO
  • Kyocera FS 1010 | KX Driver Operation Guide Rev. 1.3.1 - Page 57
    settings are listed below. 1 Load the paper in a paper cassette or the multi-purpose tray. NOTE Use the multi-purpose tray in cassette mode (the default). For further details on multi-purpose tray modes, refer to the printer's Operation Guide. 2 Specify the media type in the print operator panel
  • Kyocera FS 1010 | KX Driver Operation Guide Rev. 1.3.1 - Page 58
    3 Access the printer Properties and click the Media tab. 4 Select the document paper size from the Page Size list. 5 From the Media Type list, select the type of media for printing, then click OK. 6 Options available in the Media Type list are as follows. Media Type Plain 64 to 90 g/m2
  • Kyocera FS 1010 | KX Driver Operation Guide Rev. 1.3.1 - Page 59
    are not supported in the models listed below: FS-1700, FS-6300, FS-6700, FS-6700S, FS-6800, FS-7000, and FS-9000. Follow these steps to save custom page sizes in the printer driver. 1 Load the custom paper into the printer. For further details, refer to the printer's Operation Guide. 2 Click Start
  • Kyocera FS 1010 | KX Driver Operation Guide Rev. 1.3.1 - Page 60
    boxes in millimeters or inches. (Units are selected from the User dialog box of the Device Settings tab in the Properties printers) 148 × 210 mm (5.8 x 8.3 inches) Largest (A4 printers) 216 × 356 mm (8.5 x 14 inches) Minimum (A3 printers) 148 × 210 mm (5.8 x 8.3 inches) Largest (A3 printers
  • Kyocera FS 1010 | KX Driver Operation Guide Rev. 1.3.1 - Page 61
    Width = 150 mm Printing from Applications Height = 200 mm Sample Paper Measurements ( maximum of 20 different paper sizes can be added. Printing with Custom Paper Sizes 1 From the applications's Printer Properties, access the Print dialog box. (Select Print from the File menu.) 2 On the Media tab
  • Kyocera FS 1010 | KX Driver Operation Guide Rev. 1.3.1 - Page 62
    , the duplex unit must be installed, and additional memory may be required depending on the printer model. For further details, refer to your printer's Operation Guide. For information on Booklet printing, see Booklet Printing on page 102. In the table below, the paper sizes and media types are not
  • Kyocera FS 1010 | KX Driver Operation Guide Rev. 1.3.1 - Page 63
    fed from the cassette for the second side printing. Manual Duplex is not available when settings are made in the Advanced dialog box, accessed from the Media tab. The steps for using Manual Duplex may vary, depending on your printer, what printer accessories you have installed, and what application
  • Kyocera FS 1010 | KX Driver Operation Guide Rev. 1.3.1 - Page 64
    (shown below) appears telling the user to flip the printed pages over and re-insert them in the input bin of the printer. Some Kyocera printers have a manual duplex setting in Printer Preferences, on the Layout page. Instructions for using this method for manual duplex printing are below. If the
  • Kyocera FS 1010 | KX Driver Operation Guide Rev. 1.3.1 - Page 65
    on a network port in Windows 9x. To print on both sides, follow these steps: 1 In the Media tab, select Cassette 1. 2 In the Layout tab, select Print on Both Sides (Manual Duplex). 3 Select Flip on Long Edge or Flip on Short Edge. 4 Select Print Instructions to print an instruction sheet. Follow
  • Kyocera FS 1010 | KX Driver Operation Guide Rev. 1.3.1 - Page 66
    in the Prologue/Epilogue tab. All files listed under Prologue/Epilogue Data Files will be applied to your print job, unless they are set to the Prologue/Epilogue Data Files list. If the file is located on a network drive in a client/server environment, browse to the network path, for example: \\
  • Kyocera FS 1010 | KX Driver Operation Guide Rev. 1.3.1 - Page 67
    Prologue/Epilogue data file to page numbers and/or page ranges. This command allows the user experienced in using macro commands to insert a macro into specific locations in the print job. An advanced user may choose to use this feature to embed a PRESCRIBE command that will call a macro to
  • Kyocera FS 1010 | KX Driver Operation Guide Rev. 1.3.1 - Page 68
    box, access the Properties. (Select Print from the File menu and select Properties.) 2 Click the Watermark tab. 3 Clear the Disable Feature check box. 4 Select from the Watermark Selection list. NOTE The Watermark Selection list has four standard and customized watermarks. For further details
  • Kyocera FS 1010 | KX Driver Operation Guide Rev. 1.3.1 - Page 69
    You can enter the text for a new watermark. The text font, color, size, and style can be adjusted. 1 From the application's Print dialog box, access the Properties. (Select Print from the File menu and select Properties.) 2 Click the Watermark tab. 3 Clear the Disable Feature check box. 4 Click Add
  • Kyocera FS 1010 | KX Driver Operation Guide Rev. 1.3.1 - Page 70
    Description field, and enter the text to be printed as a watermark in the Watermark Text field. 7 In the Text Attributes section, specify the Font. Select a font from the Font list. 8 In the Text Attributes area, specify the Color setting. • Monochrome printers: Select 10% Gray to 90% Gray or Black
  • Kyocera FS 1010 | KX Driver Operation Guide Rev. 1.3.1 - Page 71
    area, specify the typeface Style. From the Style list, choose from regular, italic, bold, or bold and italic. 11 Click OK. Selecting and Creating Custom Colors (Color printers only) In the Color setting, selecting the Custom option appears the standard Windows colors. In addition to the basic system
  • Kyocera FS 1010 | KX Driver Operation Guide Rev. 1.3.1 - Page 72
    position. • Center on Page: Places the watermark text in the center of the page. • User Defined: Bases the watermark text position on the X and Y values for the horizontal and vertical coordinates. NOTE Manual Adjustment: Select the Move option and hold the left mouse button while dragging the
  • Kyocera FS 1010 | KX Driver Operation Guide Rev. 1.3.1 - Page 73
    or end of the text and dragging it to the desired position. NOTE • Manual Adjustment: You can select Rotate and hold the left mouse button while dragging the watermark image at left to the desired angle. • Select User Defined in the Text Position field and then Angle in the Text Angle. Activate
  • Kyocera FS 1010 | KX Driver Operation Guide Rev. 1.3.1 - Page 74
    2 From the Watermark Selection list, select the watermark text you wish to delete. Click Delete style. 1 Clear the Disable Feature check box on the Watermark tab. 2 From the Watermark Selection list, select the watermark text for editing. 3 Click Edit... . The Watermark Properties dialog box appears.
  • Kyocera FS 1010 | KX Driver Operation Guide Rev. 1.3.1 - Page 75
    , First page only, All pages except first page, or Only on specified pages for printing the watermark text. NOTE Enter the pages in the box to print the watermark on specific pages. For example, to print the watermark on pages 1, 3, 5, 6, 7, 8, 9, 10, 11, and 12, enter [1,3,5-12]. 2 Select the
  • Kyocera FS 1010 | KX Driver Operation Guide Rev. 1.3.1 - Page 76
    the printer settings for Resolution and EcoPrint. Options Resolution EcoPrint Descriptions The number of dots printed in one inch. Higher resolution allows more accurate printing of specific details. Reduces the amount of toner placed on the printed page, extending the life of the toner cartridge
  • Kyocera FS 1010 | KX Driver Operation Guide Rev. 1.3.1 - Page 77
    FS-3800 support 1200 dpi Fine mode. Smooths the outline of text and vector graphics. For color printers, this option is only available when printing in monochrome mode. Depending on the model, choose from On, Off, 75%, or 50%. These options enable you to extend the use of your toner cartridges by
  • Kyocera FS 1010 | KX Driver Operation Guide Rev. 1.3.1 - Page 78
    This setting specifies the method used to send TrueType fonts to the printer during printing. 1 Click Font Settings. The Font Settings dialog box appears. Download TrueType fonts as outline Download TrueType fonts as bitmap Substitute with Device fonts Descriptions Sends fonts to the printer
  • Kyocera FS 1010 | KX Driver Operation Guide Rev. 1.3.1 - Page 79
    Printing from Applications 2 In the Font Settings dialog box, enable the Disable Device fonts check box to prevent any substitution of TrueType fonts with built-in printer fonts installed on your computer are listed in the System Fonts, and the printer fonts are listed in Available Device Fonts. 1
  • Kyocera FS 1010 | KX Driver Operation Guide Rev. 1.3.1 - Page 80
    appears. 2 Determine the Options settings. Refer to the options and descriptions below. Options Print Text as Black Print Graphics as Black (monochrome printers only) Mirror Print (Color Printers Only) Descriptions Prints color and gray characters in black. There is no effect on white text, color
  • Kyocera FS 1010 | KX Driver Operation Guide Rev. 1.3.1 - Page 81
    the Options settings. Refer to the options and descriptions below. Options Print Text as Black Print Graphics as Black (monochrome printers only) Reverse Image Mirror Print Halftone Screen (monochrome printers only) Descriptions Prints color and gray characters in black. There is no effect on
  • Kyocera FS 1010 | KX Driver Operation Guide Rev. 1.3.1 - Page 82
    Screen Settings dialog box appears. 2 Clear the Use Printer's Default Screens check box. 3 Select from the list for each item, or enter values into the boxes for your color printouts. Color Mode You can switch between printing in Color (CMYK) and Monochrome modes. Specifying Custom mode allows
  • Kyocera FS 1010 | KX Driver Operation Guide Rev. 1.3.1 - Page 83
    the Color Mode list, and make a selection. For further details, refer to the table below. Color Mode Settings Options Color (CMYK) Monochrome Custom Descriptions Uses the four toner colors to print text and graphics in full color. Uses only the black toner for black-and-white printing. Opens the
  • Kyocera FS 1010 | KX Driver Operation Guide Rev. 1.3.1 - Page 84
    in color reproduction among various devices. It works by compensating for the different color spaces of color printers. A set of parameters called a profile is selected and applied. The KX printer driver offers a variety of profiles for each simulation of ICM, Monitor and Ink. Color matching options
  • Kyocera FS 1010 | KX Driver Operation Guide Rev. 1.3.1 - Page 85
    RGB) Ink Simulation (CMYK) Color Reproduction Descriptions Color matching is performed based on default color settings. For details, refer to Color Reproduction Settings on page 82. Specifies how the color is processed in the print job in order to match the original as much as possible. Image Color
  • Kyocera FS 1010 | KX Driver Operation Guide Rev. 1.3.1 - Page 86
    listed in the table below. ICM Setting Options Descriptions Optimize for Exact Color (Colormetric) Utilizes the same color is needed in all print Profile as the default on the Color Management tab. Color Reproduction Settings Objects within the document being printed are separated into three
  • Kyocera FS 1010 | KX Driver Operation Guide Rev. 1.3.1 - Page 87
    black, using four color toners (CMYK). All objects are printed in vivid colors. Color Adjustment Settings -- HSL You can save the three Color Adjustment settings as a Custom selection. The setting options and saving instructions are described below. 1 From the Color Adjustment list, choose Custom
  • Kyocera FS 1010 | KX Driver Operation Guide Rev. 1.3.1 - Page 88
    2 Click [...] next to the list to display the Color Adjustment dialog box. 3 In the Color Space area, select HSL (Hue, Saturation, Lightness). Color Space Option HSL (Hue, Saturation, and Lightness)
  • Kyocera FS 1010 | KX Driver Operation Guide Rev. 1.3.1 - Page 89
    Printing 180. • Specific Hue Adjustment: Select Red, Yellow, Green, Cyan, Blue, or Magenta from the Hue Adjustment list. Or drag the slider to the right or left to increase or decrease the values between -10 and +10. • Default settings: Click Reset to return to the original factory default
  • Kyocera FS 1010 | KX Driver Operation Guide Rev. 1.3.1 - Page 90
    -- RGB You can save the three Color Adjustment settings as Custom selections. The setting options and saving instructions are described below. 1 From the Color Adjustment list, choose Custom 1, Custom 2, or Custom 3. 2 Click [...] next to the list to display the Color Adjustment dialog box. 86
  • Kyocera FS 1010 | KX Driver Operation Guide Rev. 1.3.1 - Page 91
    3 In Color Space, select RGB mode. Printing from Applications Color Space Option RGB Description Adjusts using red, green, and blue levels. 4 By clicking the buttons increase or decrease the values between -10 and +10 in the box. • Click Reset to restore the original default settings. 87
  • Kyocera FS 1010 | KX Driver Operation Guide Rev. 1.3.1 - Page 92
    7 Click OK to save the color adjustment settings. 8 Click OK. 88
  • Kyocera FS 1010 | KX Driver Operation Guide Rev. 1.3.1 - Page 93
    on page 102. After installation, optional equipment must be selected by the printer driver (device settings). For further details, refer to Installing Optional Devices on page 30. Printed documents can be stapled in the positions shown below. Upper Left Upper Right Booklet Staple and Offset
  • Kyocera FS 1010 | KX Driver Operation Guide Rev. 1.3.1 - Page 94
    Print dialog box, access Properties. (Select Print from the File menu and select Properties). 2 On the Output tab, select Finisher (Face-down) from the Output to list printed has 58 pages, it cannot be stapled. • After every sheet(s): Parameter separates documents into sets with a specific number
  • Kyocera FS 1010 | KX Driver Operation Guide Rev. 1.3.1 - Page 95
    Guide. The Offset stacks each printed document by shifting from right to left as it is delivered to the output tray. Output direction Offset is available on printers with a supported finisher (optional) installed. After installation, optional equipment must be recognized by the printer driver
  • Kyocera FS 1010 | KX Driver Operation Guide Rev. 1.3.1 - Page 96
    as the second. The Punch feature inserts holes in each printed page. The Punch feature is available on printers with supported optional finisher installed. After installing the printer driver, optional equipment must be selected in the driver in order to use the punch option (device settings). For
  • Kyocera FS 1010 | KX Driver Operation Guide Rev. 1.3.1 - Page 97
    interleaving features of the printer driver. When the Cover Mode, Page Insert, and Transparency Interleaving options are used with the multi-purpose tray, cassette mode (the default setting), must be set. For further details, refer to the print system's Operation Guide. • Cover Mode: Adds a front
  • Kyocera FS 1010 | KX Driver Operation Guide Rev. 1.3.1 - Page 98
    Check Box Selection Front Cover Insertion Type • Inserts a blank front cover. Front 5Front Outside Front cover • Prints on the outside surface of the front cover. Front 5Front Inside Duplex Printing (page 50). Front cover • Prints on the inside surface of the front cover. Front cover 94
  • Kyocera FS 1010 | KX Driver Operation Guide Rev. 1.3.1 - Page 99
    on the outside surface of the front cover and inserts a blank back cover. Back cover Front and Back 5Front Inside Duplex Printing (page 50). Front cover • Prints on the inside surface of the front cover and inserts a blank back cover. Back cover Front and Back 5Front Outside 5Front Inside
  • Kyocera FS 1010 | KX Driver Operation Guide Rev. 1.3.1 - Page 100
    Front and Back 5Back Inside Cover Insertion Type • Inserts blank front and back covers. Back cover Front and Back 5Back Outside Duplex Printing (page 50). Front cover • Prints on the outside surface of the front cover and inserts a blank back cover. Back cover Front and Back 5Back Inside 5Back
  • Kyocera FS 1010 | KX Driver Operation Guide Rev. 1.3.1 - Page 101
    cover printing options: 1 From the Media for Cover list, select Media type selections are not supported for the following models: KM-1510, KM-1530, KM-1810, KM-4230, KM-5230, and KM-6230. 2 Click OK to Printing 1 From the application's Print dialog box, access the printer Properties. (Select Print
  • Kyocera FS 1010 | KX Driver Operation Guide Rev. 1.3.1 - Page 102
    to your desired page arrangement as shown in the following table. To print on both the front and back of the inserted page, enable the Print onto Front and Print onto Back check boxes. Check Box Options 5Page Insert Printing Inserted Pages Descriptions • Inserts a blank page before the second page
  • Kyocera FS 1010 | KX Driver Operation Guide Rev. 1.3.1 - Page 103
    inserted page. 5Page Insert 5Print onto Front 5Print onto Back Duplex Printing (page 50). Inserted page • Prints on both sides of the inserted page. Inserted page I enter [5,11-13,18]. 3 From the Media for Page list, select the media type of the inserted page or the source paper cassette. 99
  • Kyocera FS 1010 | KX Driver Operation Guide Rev. 1.3.1 - Page 104
    and Cover Mode or Page Insert cannot be used simultaneously. Transparency Interleaving Method 1 From the application's Print dialog box, access the printer Properties. Select Print from the File menu and select Properties. 2 From the Source list on the Media tab, select Multi-Purpose Feeder. 100
  • Kyocera FS 1010 | KX Driver Operation Guide Rev. 1.3.1 - Page 105
    3 From the Media Type list, select Transparency. Using Optional Equipment 4 Click Advanced... to access the Advanced Media Settings dialog box. 101
  • Kyocera FS 1010 | KX Driver Operation Guide Rev. 1.3.1 - Page 106
    bind it in the center. Booklet printing is available with printers equipped with duplexers. Stapling and binding requires optional document finishers. For further details on Staple settings, refer to Staple on page 89. The supported paper sizes for Booklet Mode printing are A3, ledger, B4, A4, and
  • Kyocera FS 1010 | KX Driver Operation Guide Rev. 1.3.1 - Page 107
    Outside Inside Outside Right Edge Binding Inside Inside Using Booklet Printing 1 From the application's Print dialog box, access the printer Properties. (Select Print from the File menu and select Properties.) 2 Access the printer Properties and click the Layout tab. 3 Select the Booklet Mode
  • Kyocera FS 1010 | KX Driver Operation Guide Rev. 1.3.1 - Page 108
    Guide. Frequently, the application settings are given priority, causing a change in the sorter output method depending on the application. Verify these settings before printing your documents. Sorter Modes There are three sorter modes to choose from. These modes are selected on the printer driver
  • Kyocera FS 1010 | KX Driver Operation Guide Rev. 1.3.1 - Page 109
    of trays. If a tray becomes full, the printer pauses and displays a message to remove the paper from the tray. After the paper is removed, printing resumes for the remaining number of copies. • This function requires a hard disk installed in the printer or a RAM Disk. For setup information, refer
  • Kyocera FS 1010 | KX Driver Operation Guide Rev. 1.3.1 - Page 110
    2 From the Output to list, select Mailbox Face-down. 3 Select the Collate check box. Non-Collating 4 Select the number of complete sets in the Copies box. When printing using the collate option, specify the number of copies not to exceed the number of trays. The document page length must not
  • Kyocera FS 1010 | KX Driver Operation Guide Rev. 1.3.1 - Page 111
    Mailbox Face-down. 2 Select the Mailbox check box. Select the desired output tray to be used (for example Mailbox 1) from the list at right. 3 Click OK to return to the Print dialog box, and click OK to start printing. The document is delivered to the specified tray, (for example Mailbox 1). 107
  • Kyocera FS 1010 | KX Driver Operation Guide Rev. 1.3.1 - Page 112
    and vertical orientation. The Job Settings option is available when you install an optional hard disk or a RAM disk on the printer. For further details on hard disk installation and setup, refer to RAM Disk Settings on page 33. Private print and Proof and Hold can be used with a RAM Disk. 108
  • Kyocera FS 1010 | KX Driver Operation Guide Rev. 1.3.1 - Page 113
    power is turned off Saved until printer power is turned off Deleted after printing Saved until manually deleted Access Code No No Yes Optional Panel Message (Category) Menu> e-MPS >Quick Copy Menu> e-MPS >Quick Copy Default number of pages printed Same as for original job (adjustable) One fewer
  • Kyocera FS 1010 | KX Driver Operation Guide Rev. 1.3.1 - Page 114
    user name is correct, press the ENTER key. Otherwise, press the S or T key until the correct name appears. 7 Press the ENTER key. Follow the instructions in the Identification on page 34 to continue. 8 The job name appears with a blinking question mark [ ? ]. If this is the correct job for printing
  • Kyocera FS 1010 | KX Driver Operation Guide Rev. 1.3.1 - Page 115
    remain saved on the hard disk until the printer is turned off. To delete jobs manually, use the same key operations as explained in Deleting Quick Copy Jobs on page 110. Private Print Private Print jobs are saved to the hard disk for printing until a four-digit access code is entered. The saved
  • Kyocera FS 1010 | KX Driver Operation Guide Rev. 1.3.1 - Page 116
    delete the job without printing it, follow the same procedure as in Deleting Quick Copy Jobs on page 110. Job Storage The Job Storage feature saves jobs on the hard disk for future printing, even if the printer is switched off. You can also use access codes to restrict the printing of forms. 112
  • Kyocera FS 1010 | KX Driver Operation Guide Rev. 1.3.1 - Page 117
    jobs, you must enter the same access code as saved in the Job Storage procedure. Virtual Mailbox With the Virtual Mailbox feature, mailboxes created on the hard disk are assigned to multiple users. Jobs posted to a virtual mailbox can be printed later from the printer operator panel. Jobs saved in
  • Kyocera FS 1010 | KX Driver Operation Guide Rev. 1.3.1 - Page 118
    • Printing Virtual Mailbox Job Lists • Printing Jobs in Virtual Mailboxes Creating Virtual Mailboxes 1 Click Start in the Windows taskbar, and click Printers and Faxes to open the Printers and Faxes window. 2 Right-click the icon for your printer in the Printers and Faxes window. A list appears
  • Kyocera FS 1010 | KX Driver Operation Guide Rev. 1.3.1 - Page 119
    3 Click Properties in the list. The Properties dialog box appears. Click the Device Settings tab. 4 Select the Hard Disk check box. The Hard Disk Settings dialog box appears. 5 Click New and enter any name into Mailbox Name. For example, name the mailbox after the user or department. The name can
  • Kyocera FS 1010 | KX Driver Operation Guide Rev. 1.3.1 - Page 120
    your personal computer. Once saved, the list can be read by other printer drivers. 1 Follow the instructions in the previous section to display the Hard Disk Settings of the printer driver that will be the source of the list. Click Export.... 2 The Export VMB List dialog box appears. Select save
  • Kyocera FS 1010 | KX Driver Operation Guide Rev. 1.3.1 - Page 121
    4 Click Import... to display the Hard Disk Settings of the printer driver that are the destination for the list. 5 The Import VMB List dialog box appears. Select the virtual mailbox data file you wish to read from the Look in list. 6 Click the virtual mailbox list name and click Open. 7 The
  • Kyocera FS 1010 | KX Driver Operation Guide Rev. 1.3.1 - Page 122
    on the hard disk and held for printing. • Printing the list -- Refer to the next section, Printing Virtual Mailbox Job Lists, below. • Printing saved jobs -- Refer to Printing Jobs in Virtual Mailboxes on page 119. Printing Virtual Mailbox Job Lists Follow these steps to print the jobs lists of
  • Kyocera FS 1010 | KX Driver Operation Guide Rev. 1.3.1 - Page 123
    specific details for each virtual mailbox. The symbol  to the left of a virtual mailbox indicates jobs in the mailbox. Virtual Mailbox Job List Printing Jobs in Virtual Mailboxes 1 On the printer provided for backward compatibility with printing environments developed before the Job Option.
  • Kyocera FS 1010 | KX Driver Operation Guide Rev. 1.3.1 - Page 124
    is reached. Permanent jobs remain saved until removed by the user. Printing and Saving Temporary and Permanent Jobs NOTE Check that your printer has an optional hard disk installed. 1 From the application's Print dialog box, access the Properties. (Select Print from the File menu). 2 Open the
  • Kyocera FS 1010 | KX Driver Operation Guide Rev. 1.3.1 - Page 125
    located on the supplied Kyocera Software Library CD-ROM. NOTE NOTE The KM-NET for Clients communicates with the printer using TCP/IP protocol. To make a local connection with your computer, the KX printer driver must be installed on it. Local connection cannot be used in Windows 2000. 1 From the
  • Kyocera FS 1010 | KX Driver Operation Guide Rev. 1.3.1 - Page 126
    the hard disk. NOTE To delete jobs manually, right-click on the job name and select Delete from the list. For further details, refer to KM-NET for Clients Operation Guide. Printing Additional Copies of Saved Jobs You can reprint saved print jobs using the optional barcode reader. Use the printer
  • Kyocera FS 1010 | KX Driver Operation Guide Rev. 1.3.1 - Page 127
    all pages. 7 If you want to print the job ID as characters with the barcode, as shown in the diagram below, enable the Print Barcode ID check box. {28L016T50} 8 From the Position list, select the barcode position on the page. From the Orientation list, select the direction of the barcode. 9 Click
  • Kyocera FS 1010 | KX Driver Operation Guide Rev. 1.3.1 - Page 128
    Upper-Right Position Lower-Right Upper-Left Lower-Right Vertical When printing, the barcode is printed in the designated position. Reading with the Barcode Reader When the printed job ID is read by the barcode reader, the printer outputs that page. • If the barcode on the front cover is
  • Kyocera FS 1010 | KX Driver Operation Guide Rev. 1.3.1 - Page 129
    driver option settings are being set, its icon is displayed in the list on the Profile tab, and it can be shared by each printer. For further details, refer to Installing Components on page 25. Creating Profiles Follow these steps to create a new profile. 1 From the application's Print dialog
  • Kyocera FS 1010 | KX Driver Operation Guide Rev. 1.3.1 - Page 130
    , and select the Icon Style. The name can be up to 31 characters. 6 Select a color for the Profile Information from the Icon Color list. This option allows you to sort icons by color. 7 Enter comments about the settings into the Profile Information Description section. Up to 256 characters
  • Kyocera FS 1010 | KX Driver Operation Guide Rev. 1.3.1 - Page 131
    displays the settings and comment. Click Use to activate the displayed printer settings. Editing Profiles The Name, Icon Style, Icon Color, shared profiles can be edited. 1 From the application's Print dialog box, access the Properties. (Select Print from the File menu and select Properties.) 2 Click
  • Kyocera FS 1010 | KX Driver Operation Guide Rev. 1.3.1 - Page 132
    it read by other printers. The profiles on several printers can be shared. Print results may vary depending on the printer model. 1 From the application's Print menu, access the Properties. (Select Print from the File menu and select Properties.) 2 In the source printer driver, click the Profile tab
  • Kyocera FS 1010 | KX Driver Operation Guide Rev. 1.3.1 - Page 133
    appears. Save the profile. 5 Specify the save location in the Save in list, enter a name for the file in the File name field, and click Save. Close the Properties dialog box. Read source 6 In the destination printer driver, click the Profile tab in the Properties dialog box. Click Import... . Read
  • Kyocera FS 1010 | KX Driver Operation Guide Rev. 1.3.1 - Page 134
    The Import Profile dialog box appears. Select the profile from the Look in list, select the profile name, and then click Open. 8 If a Profile tab. Read destination 9 The profile read by the printer driver displays in the Profile Selections, and profile reading is finished. Read destination 130
  • Kyocera FS 1010 | KX Driver Operation Guide Rev. 1.3.1 - Page 135
    , Layout, Imaging, Color, Output, Prologue/ Epilogue, Watermark, and Device Settings tabs. By simply clicking Setting Information... on the Printing Preferences/Properties dialog box, current driver settings can be displayed in a tree view. Displayed settings may vary depending on the PDL NOTE 131
  • Kyocera FS 1010 | KX Driver Operation Guide Rev. 1.3.1 - Page 136
    132
  • Kyocera FS 1010 | KX Driver Operation Guide Rev. 1.3.1 - Page 137
    Appendix A Available Fonts Font Name Albertus Extra Bold Albertus Medium Antique Olive Antique Olive Bold Antique Olive Italic Arial Arial Bold Arial Italic Arial Bold Italic CG Times CG Times Bold CG Times Italic CG Times Bold Italic CG Omega CG Omega Bold CG Omega Italic CG Omega Bold Italic
  • Kyocera FS 1010 | KX Driver Operation Guide Rev. 1.3.1 - Page 138
    134
  • Kyocera FS 1010 | KX Driver Operation Guide Rev. 1.3.1 - Page 139
    Passthrough 38 Device fonts disabling 75 Device fonts, disabling 74 Document image, sizing 51 Document Portability 77 Downloading fonts 74 Duplex manual 59 Duplex Printing 58- 59 Duplexer unit 56 E EcoPrint 72- 73 F Fast Printing 77 Finisher 31 Finisher Punch Settings 31 Firewall 44- 45 Fonts 38, 74
  • Kyocera FS 1010 | KX Driver Operation Guide Rev. 1.3.1 - Page 140
    120 K KM-NET for Clients using to print saved jobs 121 KPDL 36- 38, 52 settings 76- 77 Kyocera Image Manual Duplex 59 Settings 60 Measurement 34 Media combinations 99- 100 Media Type 37, 53- 54 available options 54 Mirror Print 77 monochrome printers 37 MP tray 56 Multiple Pages 51 N Network
  • Kyocera FS 1010 | KX Driver Operation Guide Rev. 1.3.1 - Page 141
    Print and Hold printing remaining copies 111 Print Borders 52 Print Quality 72 Print Size 51 Printer Driver updating 27 Printer Properties accessing 29 Printing Printing 62 Rotate Collate 108 Rotated 50 S Scaling 51- 52 Setting staple 89 Settings administrator 38 Administrator password 119 manual duplex
  • Kyocera FS 1010 | KX Driver Operation Guide Rev. 1.3.1 - Page 142
    - 94, 100- 102 True Type Options 74 TrueType 38, 74 U Unit of Measurement 34 USB Connection 1, 7 User Interface simplified 35 User Settings 34 V Virtual Mailbox 113- 119 assigning 32 printing job lists 118 printing jobs in 119 saving jobs 117 W Watermarks adding 65 deleting text 69 editing 70 Page
  • Kyocera FS 1010 | KX Driver Operation Guide Rev. 1.3.1 - Page 143
  • Kyocera FS 1010 | KX Driver Operation Guide Rev. 1.3.1 - Page 144
    ©2005 is a trademark of Kyocera Corporation
  • Kyocera FS 1010 | KX Driver Operation Guide Rev. 1.3.1 - Page 145
    Revision 1.3 2005.2
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
Kyocera Extended Driver
User Guide