Kyocera FS-1035MFP/L FS-1035MFP/DP/1135MFP Printer Driver User Guide Rev 14.23
Kyocera FS-1035MFP/L Manual
View all Kyocera FS-1035MFP/L manuals
Add to My Manuals
Save this manual to your list of manuals |
Kyocera FS-1035MFP/L manual content summary:
- Kyocera FS-1035MFP/L | FS-1035MFP/DP/1135MFP Printer Driver User Guide Rev 14.23 - Page 1
- Kyocera FS-1035MFP/L | FS-1035MFP/DP/1135MFP Printer Driver User Guide Rev 14.23 - Page 2
Windows Server 2008 environments. User Interface screen captures shown in this guide may differ depending on your printing system. This user guide and its contents were developed for the 5.3 driver. Models supported by the KX printer driver FS-1030MFP FS-1035MFP FS-1130MFP FS-1135MFP © 2011 KYOCERA - Kyocera FS-1035MFP/L | FS-1035MFP/DP/1135MFP Printer Driver User Guide Rev 14.23 - Page 3
Components ...1-9 Installing Optional Printer Components 1-9 The Add Printer Wizard ...1-9 Installing a Printer Driver in Windows 7 and Windows Vista 1-9 Installing a Printer Driver in Windows XP 1-10 Printer Driver Settings Access ...1-10 Changing the Default Driver Settings 1-10 Chapter - Kyocera FS-1035MFP/L | FS-1035MFP/DP/1135MFP Printer Driver User Guide Rev 14.23 - Page 4
User Settings ...2-12 Identification ...2-12 Units ...2-13 Language Preference ...2-13 PDL (Page Description Language 2-13 PDL Options ...2-14 PDF Options ...2-16 XPS Driver Print Preview ...4-5 Previewing a Print Job ...4-5 Kyocera Logo ...4-6 Displaying Version Information 4-6 Displaying Plug-in - Kyocera FS-1035MFP/L | FS-1035MFP/DP/1135MFP Printer Driver User Guide Rev 14.23 - Page 5
't Use Application Name ...8-3 Overwrite Job Name ...8-3 Selecting a Job Name ...8-4 Chapter 9 Advanced Prologue/Epilogue ...9-1 Selecting a Prologue/Epilogue File 9-1 Editing a Prologue/Epilogue File 9-1 Deleting a Prologue/Epilogue File 9-2 Printer Driver iii - Kyocera FS-1035MFP/L | FS-1035MFP/DP/1135MFP Printer Driver User Guide Rev 14.23 - Page 6
Security Watermark 9-7 Status Monitor ...9-8 Selecting Status Monitor Options 9-8 Setting Status Monitor Preferences 9-9 EMF Spooling ...9-10 Selecting EMF Spooling ...9-10 Enable Client Profile ...9-10 Glossary ...i iv User Guide - Kyocera FS-1035MFP/L | FS-1035MFP/DP/1135MFP Printer Driver User Guide Rev 14.23 - Page 7
Accept to proceed. 5 To begin the installation, click Install Software. Note: If the Windows Security warning dialog box appears at any point during the installation process, click Install this driver software anyway. 6 The Installer appears with several installation methods displayed. Selecting - Kyocera FS-1035MFP/L | FS-1035MFP/DP/1135MFP Printer Driver User Guide Rev 14.23 - Page 8
recommend you continue with the steps to install the KX Driver for an expanded feature set. In Windows, if the Found New Hardware Wizard dialog box appears during the installation process, click Cancel. If the Hardware Installation warning dialog box appears, click Continue Anyway. 1-2 User Guide - Kyocera FS-1035MFP/L | FS-1035MFP/DP/1135MFP Printer Driver User Guide Rev 14.23 - Page 9
port. If the installation wizard still displays the IP address, contact your system administrator. (Not available with a USB connection.) Click Information if you want to open a dialog box with details about IP Address, Host Name, Printer Model, Contact, Location, and Serial Number. Click OK. Click - Kyocera FS-1035MFP/L | FS-1035MFP/DP/1135MFP Printer Driver User Guide Rev 14.23 - Page 10
and provides basic support for your printer. The KX XPS driver is only available for printing systems used with Windows 7, Windows Vista, or Windows Server 2008. The XPS driver is discussed in the Device Settings chapter. Minidriver functionality is not documented in this user guide. Installing in - Kyocera FS-1035MFP/L | FS-1035MFP/DP/1135MFP Printer Driver User Guide Rev 14.23 - Page 11
installation procedure of the driver software in Windows operating systems using a USB connection. With Discover, all devices available for the driver installation are found automatically. This is the recommended Custom Mode USB installation method. 1 Ensure that your printer and computer are turned - Kyocera FS-1035MFP/L | FS-1035MFP/DP/1135MFP Printer Driver User Guide Rev 14.23 - Page 12
a Network Connection using Custom Select This section describes the custom installation procedure of the driver software in Windows operating systems using a network connection. 1 Ensure that your printer and computer are connected to a network. 2 On the Installation Method page, select Custom Mode - Kyocera FS-1035MFP/L | FS-1035MFP/DP/1135MFP Printer Driver User Guide Rev 14.23 - Page 13
If there is only one driver model, this page does not appear. Proceed to the next step. 5 On the Printer Port page, select the port box appears only in Windows XP.) When the installation completes successfully, click Finish to exit the installation wizard. A message may appear if there is a software - Kyocera FS-1035MFP/L | FS-1035MFP/DP/1135MFP Printer Driver User Guide Rev 14.23 - Page 14
driver software in Windows operating systems using a USB connection. With the Custom select option, you manually select the printing system and printer box appears, click Continue Anyway. 9 The Installation Completed page appears displaying the following driver options. Print a test page User Guide - Kyocera FS-1035MFP/L | FS-1035MFP/DP/1135MFP Printer Driver User Guide Rev 14.23 - Page 15
software guide you through printer installation. You are prompted to make installation choices on each page. Installing a Printer Driver in Windows 7 and Windows Vista This section describes how to install a printer driver using the Add Printer Wizard in Windows 7 and Windows Vista. Printer Driver - Kyocera FS-1035MFP/L | FS-1035MFP/DP/1135MFP Printer Driver User Guide Rev 14.23 - Page 16
appears. Click either Add a local printer or Add a network, wireless or Bluetooth printer. Follow the instructions on each page, and then click Next to proceed to the next page. Note: If the Windows Security warning dialog box appears, click Install this driver software anyway. 4 The last page of - Kyocera FS-1035MFP/L | FS-1035MFP/DP/1135MFP Printer Driver User Guide Rev 14.23 - Page 17
Installation 3 Click Printing Preferences. 4 In the Printing Preferences dialog box, select the desired features in all tabs. 5 Click OK to save the settings. Printer Driver 1-11 - Kyocera FS-1035MFP/L | FS-1035MFP/DP/1135MFP Printer Driver User Guide Rev 14.23 - Page 18
lets the driver manage font downloads more efficiently. Administrator, User, PDL (Page Description Language), and Compatibility settings can also be selected. Accessing Device Settings Device Settings can be accessed from Devices and Printers (Windows 7), Printers (Windows Vista), or Printers and - Kyocera FS-1035MFP/L | FS-1035MFP/DP/1135MFP Printer Driver User Guide Rev 14.23 - Page 19
make sure that they are correct. Note: The default setting for Windows XP Service Pack 2 is for the Windows Firewall to be set to On. The setting . In Windows XP, the driver settings are updated immediately. In Windows 7, Windows Vista, and Windows Server 2008, the Auto Configure dialog box opens. - Kyocera FS-1035MFP/L | FS-1035MFP/DP/1135MFP Printer Driver User Guide Rev 14.23 - Page 20
dialog box lets the driver control collation. RAM disk can then increase the print speed of collated multiple copies by sending the user. General An administrator can control the display of the Quick Print tab, and other miscellaneous settings, including password and SNMP settings. 2-3 User Guide - Kyocera FS-1035MFP/L | FS-1035MFP/DP/1135MFP Printer Driver User Guide Rev 14.23 - Page 21
access additional check boxes: Hide other tabs displays only the Quick Print tab to the user. Set Quick Print tab as default opens to this tab when you access Printing Preferences. Hide Edit Quick Print control prevents users from customizing the Quick Print tab. Send Count Information This option - Kyocera FS-1035MFP/L | FS-1035MFP/DP/1135MFP Printer Driver User Guide Rev 14.23 - Page 22
password in Confirm password and click OK. Clearing the Administrator Password You can remove the administrator password. 1 In Device Settings, click Administrator. 2 In the Enter Password dialog box, type the password set in the printer driver and in the a user name and password. User Guide - Kyocera FS-1035MFP/L | FS-1035MFP/DP/1135MFP Printer Driver User Guide Rev 14.23 - Page 23
This would save paper, resulting in cost savings and ecological benefits. Locking a setting will also lock the feature where it appears in other tabs. For example, selecting Lock Multiple pages per sheet will also select and lock that feature in the Quick Print and Layout tabs. Printer Driver 2-6 - Kyocera FS-1035MFP/L | FS-1035MFP/DP/1135MFP Printer Driver User Guide Rev 14.23 - Page 24
Settings tab displays driver settings that an administrator can lock. Once locked, user changes are restricted and the settings are applied to all print jobs. Once the settings are made, the Password settings option can be accessed. This lets an administrator control usage of paper and toner amounts - Kyocera FS-1035MFP/L | FS-1035MFP/DP/1135MFP Printer Driver User Guide Rev 14.23 - Page 25
When sending a print job, type a name and password when prompted, then click OK to print. This option ensures that the job prints, only after verifying that the selected name is saved in the driver. Validate user name (computer) or prompt for login user name This option searches for the Windows User - Kyocera FS-1035MFP/L | FS-1035MFP/DP/1135MFP Printer Driver User Guide Rev 14.23 - Page 26
IDs can be stored in the printer driver for use with multiple printing systems. Job Accounting Options Job accounting supports the following options: Use specific account ID Select this option to track the print jobs of a user or group with an account ID. It sends the account ID with each print - Kyocera FS-1035MFP/L | FS-1035MFP/DP/1135MFP Printer Driver User Guide Rev 14.23 - Page 27
is saved in the driver. When sending a print job, stored in the driver. Account ID descriptions match the user or group with boxes. 6 Print the document from the application. 7 For some options, when the Print Options dialog box appears, type or select an account ID, and click OK. Printer Driver - Kyocera FS-1035MFP/L | FS-1035MFP/DP/1135MFP Printer Driver User Guide Rev 14.23 - Page 28
up, you can use the printer driver's Policy Manager tab to set server and user information. 1 In Device Settings > Administrator Settings > Policy Manager, select Policy Manager. 2 Enter the server address and port number. 3 Select an authentication option: Use Windows authentication Select to use - Kyocera FS-1035MFP/L | FS-1035MFP/DP/1135MFP Printer Driver User Guide Rev 14.23 - Page 29
. 2 If the Policy Manager Login dialog box appears, enter a Login user name and password. This dialog box is generated when an invalid or blank Policy Manager user name or password is set in the driver. The Policy Manager Login dialog box does not appear if Use Windows authentication is selected in - Kyocera FS-1035MFP/L | FS-1035MFP/DP/1135MFP Printer Driver User Guide Rev 14.23 - Page 30
5e, KPDL (an emulation of PostScript printing), or PDF (Portable Document Format). The printer default is PCL XL, which is suitable for most printing purposes. When using the XPS driver in Windows 7, Windows Vista, or Windows Server 2008, XPS is the only PDL selection. After you select a PDL, the - Kyocera FS-1035MFP/L | FS-1035MFP/DP/1135MFP Printer Driver User Guide Rev 14.23 - Page 31
font downloading Supports most Graphics Windows, Mac OS, and UNIX platforms. For a document using mixed paper sizes, all pages in the PDF use the size of the first page. Note: With PDF selected in the PDL Settings dialog box, only a limited set of driver options are available. Printer Driver - Kyocera FS-1035MFP/L | FS-1035MFP/DP/1135MFP Printer Driver User Guide Rev 14.23 - Page 32
Enable smart duplex printing This option automatically keeps a sheet of paper from being sent through the duplex unit if the sheet will only ). KPDL Settings Allow data passthrough This option reduces errors when printing complex jobs from applications that use PostScript boxes. 2-15 User Guide - Kyocera FS-1035MFP/L | FS-1035MFP/DP/1135MFP Printer Driver User Guide Rev 14.23 - Page 33
saved to a file. The PDF Settings dialog box contains the following options: PDF Settings Embed fonts password to open document Type a User password. The user password must be entered at the time the PDF document is opened. This password must be different from the owner password. Printer Driver - Kyocera FS-1035MFP/L | FS-1035MFP/DP/1135MFP Printer Driver User Guide Rev 14.23 - Page 34
, XPS requires compatible printer hardware and software written for the Windows Presentation Foundation (WPF) architecture. PCL and KPDL are not compatible with an XPS environment. Therefore, an XPS driver supports a single PDL setting. The XPS driver can be installed from the 2-17 User Guide - Kyocera FS-1035MFP/L | FS-1035MFP/DP/1135MFP Printer Driver User Guide Rev 14.23 - Page 35
the options in Compatibility Settings to the default by clicking Reset. Ignore Application Collation This option bypasses the Collate setting in software applications, and gives priority to the printer driver setting. With the check box selected, the printer driver Collate setting is used. With the - Kyocera FS-1035MFP/L | FS-1035MFP/DP/1135MFP Printer Driver User Guide Rev 14.23 - Page 36
appear in the driver interface. Note: To remove the Output to PDF module, PDF must not be selected in the PDL Settings dialog box. 1 In Device Settings, click Kyocera logo > Plug-in. 2 Select a plug-in module from the list and click Delete, then Yes. 3 Click OK in all dialog boxes. 2-19 User Guide - Kyocera FS-1035MFP/L | FS-1035MFP/DP/1135MFP Printer Driver User Guide Rev 14.23 - Page 37
Administrator Settings in Properties. This chapter can be used as a separate Quick Print user guide when KX Driver support is controlled by an administrator. Quick Print Options You can set one or , landscape, portrait rotated, landscape rotated printing formats. Collate Printer Driver 3-1 - Kyocera FS-1035MFP/L | FS-1035MFP/DP/1135MFP Printer Driver User Guide Rev 14.23 - Page 38
available when the driver is accessed from an application's Print dialog box. Any basic print options can be Reset to the default values in extra processing involved in sending every copy from the computer to the printing system. With Collate selected, the driver prints the complete job User Guide - Kyocera FS-1035MFP/L | FS-1035MFP/DP/1135MFP Printer Driver User Guide Rev 14.23 - Page 39
Print dialog box. Editing Quick Print Options You can select from a limited set of driver features to appear in the Quick Print tab. 1 Click Start and click Devices and Printers (Windows 7), or click Control Panel and double-click Printers (Windows Vista), or Printers and Faxes (Windows XP). 2 Right - Kyocera FS-1035MFP/L | FS-1035MFP/DP/1135MFP Printer Driver User Guide Rev 14.23 - Page 40
in the Profiles dialog box. 5 Click Apply to use the selected profile for the current print job, or click OK to close the dialog box. Note: To reset the printer driver to default settings, select the Factory Default profile, and click Apply. This clears the settings of a selected profile. User Guide - Kyocera FS-1035MFP/L | FS-1035MFP/DP/1135MFP Printer Driver User Guide Rev 14.23 - Page 41
for the current print job, or click OK to close the dialog box. Exporting a Profile The Export button lets you export a copy of a profile from your printer driver for use in other printer drivers. The Factory Default profile cannot be exported. 1 Click Profiles. 2 In the Select profile section - Kyocera FS-1035MFP/L | FS-1035MFP/DP/1135MFP Printer Driver User Guide Rev 14.23 - Page 42
, click Profiles to open the Profiles dialog box. 2 Click Application to open the Application Based Printing dialog box. 3 Select an association to edit and click Edit to open the Edit Association dialog box. 4 Change desired settings under Association name, File name, or Profile. 3-6 User Guide - Kyocera FS-1035MFP/L | FS-1035MFP/DP/1135MFP Printer Driver User Guide Rev 14.23 - Page 43
Quick Print 5 Click OK in the Edit Association and Application Based Printing dialog boxes to save the revised association. Printer Driver 3-7 - Kyocera FS-1035MFP/L | FS-1035MFP/DP/1135MFP Printer Driver User Guide Rev 14.23 - Page 44
printer driver settings. Basic Settings The Basic tab contains several settings for the most commonly used printing tasks. Print size This setting sets the size of the area that the printer prints to, regardless of the actual paper output tray is used for the print job output. 4-1 User Guide - Kyocera FS-1035MFP/L | FS-1035MFP/DP/1135MFP Printer Driver User Guide Rev 14.23 - Page 45
In the Basic tab, Source specifies which tray or cassette the printer uses for a printing job. The default is Auto source selection, which instructs the printer to search for the media requested by the application or the printer driver. If the selected tray or cassette empties during a print job - Kyocera FS-1035MFP/L | FS-1035MFP/DP/1135MFP Printer Driver User Guide Rev 14.23 - Page 46
The driver supports a maximum of twenty custom sizes. 1 In the Basic tab, click Page Sizes. 2 Click New. 3 A default custom name appears in the Name box. , then the printer prints on only one side of each page. The printer system contains a duplex unit that turns the paper over to allow User Guide - Kyocera FS-1035MFP/L | FS-1035MFP/DP/1135MFP Printer Driver User Guide Rev 14.23 - Page 47
Basic Collate Printer Driver Printing in Duplex on short edge. 3 Click OK to return to the Print dialog box. 4 Click OK to start printing. Collate specifies the order in involved in sending every copy from the computer to the printing system. With Collate selected, the driver prints the - Kyocera FS-1035MFP/L | FS-1035MFP/DP/1135MFP Printer Driver User Guide Rev 14.23 - Page 48
4 When the Print preview dialog box appears: Click the arrow buttons to view document pages. To close the preview and make additional changes in driver settings before printing, click the "X" button. If you are satisfied with the preview, click the printer button to print the job. 4-5 User Guide - Kyocera FS-1035MFP/L | FS-1035MFP/DP/1135MFP Printer Driver User Guide Rev 14.23 - Page 49
information, click Legal Notices. Click OK to close the driver information dialog boxes. Displaying Plug-in Information A plug-in integrates with the printer driver to extend the driver's capabilities. In Device Settings or any tab, click Kyocera logo > Plug-in to view the following plug-in - Kyocera FS-1035MFP/L | FS-1035MFP/DP/1135MFP Printer Driver User Guide Rev 14.23 - Page 50
several pages on a single sheet of paper for the purpose of reviewing the document and conserving paper. The size and readability of the multiple Multiple Pages per Sheet You can print several pages on a single sheet of paper. 1 In the Layout tab, select Multiple pages per sheet. 2 In Pages per - Kyocera FS-1035MFP/L | FS-1035MFP/DP/1135MFP Printer Driver User Guide Rev 14.23 - Page 51
Scaling Gutter Printer Driver 5 Click OK to return to the Print dialog box. 6 Click OK to start printing. Layout Scaling increases or decreases text and graphics on a page. You can also select a gutter setting that enlarges the margins to accommodate manual stapling or manual hole punch. Scaling - Kyocera FS-1035MFP/L | FS-1035MFP/DP/1135MFP Printer Driver User Guide Rev 14.23 - Page 52
Print dialog box. 3 Click OK to start printing. The Poster feature lets you create a document to a size that is larger than the paper your printer can support. You can User Settings dialog box, accessed from Device Settings. Use Print format to print a proof sheet, along with the poster, to guide - Kyocera FS-1035MFP/L | FS-1035MFP/DP/1135MFP Printer Driver User Guide Rev 14.23 - Page 53
data on adjoining sheets. Poster appearance is improved when the edges overlap slightly. Select the check box, then type or select a value between 0.00 and 1.20 inches (0.0 and 30.4 mm print format. 5 Click OK to return to the Print dialog box. 6 Click OK to start printing. Printer Driver 5-4 - Kyocera FS-1035MFP/L | FS-1035MFP/DP/1135MFP Printer Driver User Guide Rev 14.23 - Page 54
improve printing on small or thick paper. Selecting Print Quality In the on the number of resolutions supported by the printing system. High box. Custom Custom lets you choose Kyocera image refinement smoothes the edges of text and vector graphics and can be set to On, or Off. 6-1 User Guide - Kyocera FS-1035MFP/L | FS-1035MFP/DP/1135MFP Printer Driver User Guide Rev 14.23 - Page 55
are stored either permanently or temporarily in the printing system memory. Font Settings The Font Settings dialog box lets you specify how TrueType fonts are sent to the printing system. The chosen method affects the speed and quality of the print job: Download as outlines Printer Driver 6-2 - Kyocera FS-1035MFP/L | FS-1035MFP/DP/1135MFP Printer Driver User Guide Rev 14.23 - Page 56
Printers (Windows 7), or click Control Panel and double-click Printers (Windows Vista), or Printers and Faxes (Windows XP). 2 Right-click on the desired printing system model and click Printing Preferences. 3 In Imaging > Fonts, select Substitute with device fonts, and then click Fonts. User Guide - Kyocera FS-1035MFP/L | FS-1035MFP/DP/1135MFP Printer Driver User Guide Rev 14.23 - Page 57
Graphics Printer Driver Imaging In the Fonts Substitution dialog box, the System fonts list shows the fonts installed on Disable Device Fonts In some cases, the printing system substitutes fonts even if you send the TrueType fonts as outline fonts or bitmap images. Select Disable device fonts to - Kyocera FS-1035MFP/L | FS-1035MFP/DP/1135MFP Printer Driver User Guide Rev 14.23 - Page 58
default in the PDL Settings dialog box. Medium This setting prints patterns in the PDL Settings dialog box. Fine This setting prints patterns box. When GDI compatible mode is selected in the PDL Settings dialog box, Line thinning is not available. Off (default PDL Settings dialog box. Reverse image - Kyocera FS-1035MFP/L | FS-1035MFP/DP/1135MFP Printer Driver User Guide Rev 14.23 - Page 59
box. CIE optimization is available when KPDL is selected in the PDL Settings dialog box. Halftone Screen Halftone Screen lets an experienced user > Graphics Settings, click Halftone Screen. 2 Clear the Use printer's default screens check box. 3 Set the available options to the desired values: Ink - Kyocera FS-1035MFP/L | FS-1035MFP/DP/1135MFP Printer Driver User Guide Rev 14.23 - Page 60
setting increases the grayscale spectrum, making light grays darker and dark grays lighter. You can also change contrast by entering a numeric value in the text box at the right. The highest contrast setting is +100; the lowest is -100. Zero is the default 6-7 User Guide - Kyocera FS-1035MFP/L | FS-1035MFP/DP/1135MFP Printer Driver User Guide Rev 14.23 - Page 61
. In black and white printers, it increases the detail for light-colored text printed. White text and image colors are unaffected. Print graphics as black This option prints all color graphics with black, rather than grayscale. This feature is intended for CAD applications. Printer Driver 6-8 - Kyocera FS-1035MFP/L | FS-1035MFP/DP/1135MFP Printer Driver User Guide Rev 14.23 - Page 62
print on cover pages of a different weight or color than the main document. The source of the cover paper is specified by adjusting the Media for cover settings in the Publishing tab. Print on both sides must be to print on the covers. 4 Click OK to return to the Print dialog box. 7-1 User Guide - Kyocera FS-1035MFP/L | FS-1035MFP/DP/1135MFP Printer Driver User Guide Rev 14.23 - Page 63
Options Check Box Selection Front Publishing Cover Insertion Type Inserts a blank front cover. Front Front outside Prints on the outside surface of the front cover. Front Front inside Prints on the inside surface of the front cover. Front Front outside Front inside Printer Driver Prints on - Kyocera FS-1035MFP/L | FS-1035MFP/DP/1135MFP Printer Driver User Guide Rev 14.23 - Page 64
Publishing Check Box Selection Front and back Cover Insertion Type Inserts blank front and back covers. Front and back Front outside Prints on the cover. Front and back Front outside Front inside 7-3 Prints on both sides of the front cover and inserts a blank back cover. - continued User Guide - Kyocera FS-1035MFP/L | FS-1035MFP/DP/1135MFP Printer Driver User Guide Rev 14.23 - Page 65
Check Box Selection Front and back Back inside Publishing Cover Insertion Type Prints on the inside surface of the back cover and inserts a blank front Back outside Prints on both sides of the front and back covers. Choosing Cover Media You can select media for the cover. Printer Driver 7-4 - Kyocera FS-1035MFP/L | FS-1035MFP/DP/1135MFP Printer Driver User Guide Rev 14.23 - Page 66
box. 4 Click OK to start printing. Page Insert A Page insert is a preprinted page or a page of a different paper the Print onto front and Print onto back check boxes. 3 In Insert before pages, type the page of the inserted page or the source paper cassette. When you choose the media type, - Kyocera FS-1035MFP/L | FS-1035MFP/DP/1135MFP Printer Driver User Guide Rev 14.23 - Page 67
Page Insertion Options Check Box Selection Page insert Publishing Page Insertion Type Inserts a blank page. Page insert Print onto front Prints on the sheet, also known as an interleaf, helps keep transparencies clean and prevents them from clinging together. This feature is Printer Driver 7-6 - Kyocera FS-1035MFP/L | FS-1035MFP/DP/1135MFP Printer Driver User Guide Rev 14.23 - Page 68
matching that media type is automatically selected. 5 Click OK to return to the Print dialog box. 6 Click OK to start printing. The printing system's operation panel prompts you to load transparencies into the MP tray, and if necessary, load backing paper into the selected cassette. 7-7 User Guide - Kyocera FS-1035MFP/L | FS-1035MFP/DP/1135MFP Printer Driver User Guide Rev 14.23 - Page 69
a user name in the User Settings dialog box, available in Device Settings. If you do not set a user name, the Windows login user name is the default. Job Storage (e-MPS) options Storage location Access code required When job is printed When job is deleted from memory - continued Printer Driver - Kyocera FS-1035MFP/L | FS-1035MFP/DP/1135MFP Printer Driver User Guide Rev 14.23 - Page 70
, the oldest stored job is replaced by the new job. Private print jobs are deleted when the printing system is reset or turned off. When sending a sensitive document to the printing system, a user must type a four-digit access code, which is attached to the print job along with the Job - Kyocera FS-1035MFP/L | FS-1035MFP/DP/1135MFP Printer Driver User Guide Rev 14.23 - Page 71
manually deleted, or turned off. 1 In the Job tab, select Job storage (e-MPS). 2 Select Private print. 3 In the Access code box, type four numbers if you want to restrict access to your document. 4 Click OK in all dialog boxes If a user sends two print jobs with the same User name Printer Driver 8-3 - Kyocera FS-1035MFP/L | FS-1035MFP/DP/1135MFP Printer Driver User Guide Rev 14.23 - Page 72
appears as the job name. Custom This option uses a unique name for each job. Type a name in the box, up to 79 characters. 3 Select an Overwrite job name option in case a job already exists in printing system print job with the same job name remains in the printing system memory. 8-4 User Guide - Kyocera FS-1035MFP/L | FS-1035MFP/DP/1135MFP Printer Driver User Guide Rev 14.23 - Page 73
printer resident PRESCRIBE language. The Product Library disc includes a PRESCRIBE command language reference guide. A command file is a set of instructions job. To create this file, use a text editor like Windows Notepad. In Advanced > Prologue/Epilogue, select a Prologue/Epilogue Printer Driver 9-1 - Kyocera FS-1035MFP/L | FS-1035MFP/DP/1135MFP Printer Driver User Guide Rev 14.23 - Page 74
a Prologue/Epilogue file name from the list, and then click Delete. 2 In the delete confirmation box, click Yes to accept. Note: Only the file name is removed from the command file list. PDL Settings dialog box. With a command file selected in the list, choose one insertion point option: User Guide - Kyocera FS-1035MFP/L | FS-1035MFP/DP/1135MFP Printer Driver User Guide Rev 14.23 - Page 75
for default watermarks. 1 In Advanced > Watermark, click Add to create a user defined (custom) watermark; or under Select watermark, select a default or custom watermark and click Edit. 2 Under Watermark name, type a name, up to 39 characters. A default watermark cannot be renamed. Printer Driver - Kyocera FS-1035MFP/L | FS-1035MFP/DP/1135MFP Printer Driver User Guide Rev 14.23 - Page 76
default) This option places the center of the watermark text in the center of the page. User defined This option lets you manipulate the x and y coordinate boxes watermark, choose a default or custom watermark to print. 2 Under Page selection, choose pages for printing the watermark: User Guide - Kyocera FS-1035MFP/L | FS-1035MFP/DP/1135MFP Printer Driver User Guide Rev 14.23 - Page 77
the watermark on page numbers typed in the box. Print onto front outside cover This option prints scan, fax, or print from memory is attempted, the process is stopped and an error message appears on the printer's operation panel. Following installation of the printer driver, use the Optional Printer - Kyocera FS-1035MFP/L | FS-1035MFP/DP/1135MFP Printer Driver User Guide Rev 14.23 - Page 78
editing a default security watermark. Select from the following options: None This option leaves the line blank. User defined This option inserts your text up to 39 characters. All other options display date, time, or other job information that is obtained from the computer or printer driver when - Kyocera FS-1035MFP/L | FS-1035MFP/DP/1135MFP Printer Driver User Guide Rev 14.23 - Page 79
Printer Driver Advanced 9 Adjust the calibration. After adjusting calibration, in all dialog boxes toner or printing system, and after heavy printing activity. 1 In Advanced > Security Watermark, click Add to create a custom security watermark; or under Select security watermark, select a default - Kyocera FS-1035MFP/L | FS-1035MFP/DP/1135MFP Printer Driver User Guide Rev 14.23 - Page 80
to display toner levels. 5 To display a list of options, right-click the Status Monitor icon in the system tray. Hide the status monitor/Show the status monitor Switches between hiding and showing the Status Monitor image. Configure Opens a web browser to display a printer web page. 9-8 User Guide - Kyocera FS-1035MFP/L | FS-1035MFP/DP/1135MFP Printer Driver User Guide Rev 14.23 - Page 81
Monitor image in the system tray. 2 Click Sound Notification. 3 Select the Enables Event Notification check box. 4 Select an event for a Status Monitor alert. Cover open Paper jam Add paper Sleep Add toner Toner low Not connected Printing Printing completed 5 You can also add sound or speech to your - Kyocera FS-1035MFP/L | FS-1035MFP/DP/1135MFP Printer Driver User Guide Rev 14.23 - Page 82
dialog box without saving any settings. EMF Spooling EMF (Enhanced MetaFile) is a spool file format used in printing by the Microsoft Windows operating system. When a print job is sent from an application, it is transferred to the spool file. The application writes to and the printer driver reads - Kyocera FS-1035MFP/L | FS-1035MFP/DP/1135MFP Printer Driver User Guide Rev 14.23 - Page 83
code A four-digit code memory, and RAM disk. Driver settings will be updated with be read like a book. C Cassette A sliding plastic tray that holds a supply of paper for input to the printer. Collate Outputs the the printed job. The actual amount of toner used depends on the printing system mode - Kyocera FS-1035MFP/L | FS-1035MFP/DP/1135MFP Printer Driver User Guide Rev 14.23 - Page 84
Device Settings > Compatibility that determines the priority of Collate settings. If the check box is selected, the printer driver setting is used. If the check box is cleared, the software application setting is used. J Job accounting An accounting system that records and controls the number - Kyocera FS-1035MFP/L | FS-1035MFP/DP/1135MFP Printer Driver User Guide Rev 14.23 - Page 85
paper for the purpose of reviewing the document and conserving paper the application software, hardware printer driver to enhance or extend the driver's capabilities. Poster Layout feature for printing a document in a larger size than the maximum supported by the printer before you send it to print - Kyocera FS-1035MFP/L | FS-1035MFP/DP/1135MFP Printer Driver User Guide Rev 14.23 - Page 86
user defined driver the printing system's operation panel without sending the job again from the computer printer profile, rather than having to go to various tabs. Quick Print settings can be captured in a group called a profile. Profiles support corner of the window during printing. You User Guide - Kyocera FS-1035MFP/L | FS-1035MFP/DP/1135MFP Printer Driver User Guide Rev 14.23 - Page 87
U User login Registers users with a user name and password. User login provides job restriction by user, in contrast to the Job accounting feature, which assigns privileges by division or department. . You can choose one of the standard watermarks or create your own text. Printer Driver v - Kyocera FS-1035MFP/L | FS-1035MFP/DP/1135MFP Printer Driver User Guide Rev 14.23 - Page 88
Rev. 14.23 2011.11