Kyocera FS-1370DN FS-1370DN Printer Driver User Guide Rev-12.8
Kyocera FS-1370DN Manual
UPC - 632983018170
View all Kyocera FS-1370DN manuals
Add to My Manuals
Save this manual to your list of manuals |
Kyocera FS-1370DN manual content summary:
- Kyocera FS-1370DN | FS-1370DN Printer Driver User Guide Rev-12.8 - Page 1
- Kyocera FS-1370DN | FS-1370DN Printer Driver User Guide Rev-12.8 - Page 2
guide is prohibited. The information in this guide is subject to change for improvement without notice. We cannot be held liable for any problems their respective companies. Examples of the operations given in this guide support the Windows XP printing environment. Essentially the same operations - Kyocera FS-1370DN | FS-1370DN Printer Driver User Guide Rev-12.8 - Page 3
Table of Contents Chapter 1 Installation Preparing to Install the Driver ...1-1 Selecting an Installation Method 1-1 Installing Utilities ...1-2 Upgrading Driver Components ...1-2 Express Installation ...1-2 Installing in Express Mode ...1-2 Custom Installation ...1-4 Installing in Custom Mode - Kyocera FS-1370DN | FS-1370DN Printer Driver User Guide Rev-12.8 - Page 4
and Custom Quality 6-1 Selecting Print Quality ...6-1 Selecting EcoPrint ...6-2 Half Speed Mode ...6-2 Fonts ...6-2 Font Settings ...6-3 Selecting Font Settings ...6-3 Font Substitution ...6-3 Disable Device Fonts ...6-4 Graphics ...6-4 ii User Guide - Kyocera FS-1370DN | FS-1370DN Printer Driver User Guide Rev-12.8 - Page 5
Selecting Graphics Settings ...6-4 Pattern Scaling ...6-4 Inversion Settings ...6-5 Optimization Settings ...6-5 CIE Optimization ...6-5 Halftone Screen ...6-6 Adjusting Grayscale ...6-7 Selecting Text and Graphics Effects 6-7 Chapter 7 Publishing Cover Mode ...7-1 Printing Covers ...7-1 Cover - Kyocera FS-1370DN | FS-1370DN Printer Driver User Guide Rev-12.8 - Page 6
or USB connection and the installation wizard will discover your printers. You can also select Custom Mode for a network or USB connection and either manually select installation packages and specify utilities or let the installation wizard discover your printer. Express Mode Installation 1-1 User - Kyocera FS-1370DN | FS-1370DN Printer Driver User Guide Rev-12.8 - Page 7
port monitor that lets Windows TCP/IP print from any network card connected to a printing system. KPrint supports LPR and IPP printing. For the KPrint Installation instructions, refer to your Product Library CD. KPrint uses a stand-alone installer. Installing Utilities On the Installation Method - Kyocera FS-1370DN | FS-1370DN Printer Driver User Guide Rev-12.8 - Page 8
Monitor The Status Monitor displays system status messages on your computer screen during printing tasks. The Status Monitor button appears on the Advanced tab. User Guide - Kyocera FS-1370DN | FS-1370DN Printer Driver User Guide Rev-12.8 - Page 9
connected by USB and network cable, or you can manually select the driver from drivers that are available. You can separately for PCL and KPDL and provides basic support for your printer. The KX XPS DRIVER and functionality is not documented in this user guide. Installing in Custom Mode with a - Kyocera FS-1370DN | FS-1370DN Printer Driver User Guide Rev-12.8 - Page 10
the system is connected to the web. We recommend you continue with the steps to install the KX Driver for an expanded feature set. User Guide - Kyocera FS-1370DN | FS-1370DN Printer Driver User Guide Rev-12.8 - Page 11
KX DRIVER Installation 2 On the Installation Method page, select Custom Mode. 3 The Discover Printing System page opens, searching for your printing system. The Discover button is automatically selected. Select your device and click Next. If Discover does not find your printing system, a message - Kyocera FS-1370DN | FS-1370DN Printer Driver User Guide Rev-12.8 - Page 12
can be accessed easily. The Show Quick Print tab option also appears in the Administrator Settings in the Device Settings tab. Enable Status Monitor User Guide - Kyocera FS-1370DN | FS-1370DN Printer Driver User Guide Rev-12.8 - Page 13
describes the custom installation procedure of the driver software in Windows operating systems using a USB connection. With the Custom select option, you manually select the printing system and printer port to install. In Custom mode, Custom Select is not recommended for USB in environments where - Kyocera FS-1370DN | FS-1370DN Printer Driver User Guide Rev-12.8 - Page 14
page, select Optional Printer Components. 3 Select a printer, and click Next to install optional components. 4 On all Select pages, choose your components, and click Next. 1-9 User Guide - Kyocera FS-1370DN | FS-1370DN Printer Driver User Guide Rev-12.8 - Page 15
The Add Printer Wizard displays a series of screens that guide you through printer installation. You are prompted to make installation appears. The wizard provides you with step by step driver installation instructions. Follow the instructions on each page, and then click Next to proceed to the - Kyocera FS-1370DN | FS-1370DN Printer Driver User Guide Rev-12.8 - Page 16
icon. 3 Click Printing Preferences. 4 In the Printing Preferences dialog box, select the desired features in all tabs. 5 Click OK to save the settings. 1-11 User Guide - Kyocera FS-1370DN | FS-1370DN Printer Driver User Guide Rev-12.8 - Page 17
2 Device Settings In the Device Settings tab, you can select installed printing system options so the associated features can be used with the printer driver. You can also match the memory setting in the driver with the memory installed in your printing system, which lets the driver manage font - Kyocera FS-1370DN | FS-1370DN Printer Driver User Guide Rev-12.8 - Page 18
tab, check the settings to make sure that they are correct. Note: The default setting for Windows XP Service Pack 2 is for the Windows Firewall to be set to On. The setting can be changed to allow . In Windows XP and Windows 2000, the driver settings are updated immediately. 2-2 User Guide - Kyocera FS-1370DN | FS-1370DN Printer Driver User Guide Rev-12.8 - Page 19
Memory RAM Disk Device Settings In Windows 7 and Windows Vista, the Auto Configure dialog box opens. Select from Auto configure options: Auto Configure Now Click the button at any time to retrieve the current settings from the printing system. It is recommended to do this when the driver is first - Kyocera FS-1370DN | FS-1370DN Printer Driver User Guide Rev-12.8 - Page 20
. Reenter the password in Confirm password and click OK. Clearing the Administrator Password You can remove the administrator password. 1 In Device Settings, click Administrator. 2-4 User Guide - Kyocera FS-1370DN | FS-1370DN Printer Driver User Guide Rev-12.8 - Page 21
Device Settings 2 In the Enter Password dialog box, type the password and click OK. 3 In the Administrator Settings dialog box, clear the Password protect administrator settings check box. 4 Click OK. SNMP Simple Network Management Protocol (SNMP) is a set of rules that govern the management of - Kyocera FS-1370DN | FS-1370DN Printer Driver User Guide Rev-12.8 - Page 22
name and Department text boxes. Units You can set Inches or Millimeters as the unit of measurement. This is used for the following settings: 2-6 User Guide - Kyocera FS-1370DN | FS-1370DN Printer Driver User Guide Rev-12.8 - Page 23
, you must install the Output to PDF plug-in. The printer default is PCL XL, which is suitable for most printing purposes. If your application supports the XML Print Specification, then XPS printing can be performed after installing the XPS driver. With the XPS driver, the only available PDL is XPS - Kyocera FS-1370DN | FS-1370DN Printer Driver User Guide Rev-12.8 - Page 24
be slower than PCL 5e Requires more printing system memory than PCL 5e Enables native TrueType font downloading Supports most Graphics settings options PDF Output to PDF is a plug-in that lets you print or save the KPDL Settings dialog box. Select the Allow data passthrough check box to User Guide - Kyocera FS-1370DN | FS-1370DN Printer Driver User Guide Rev-12.8 - Page 25
KX DRIVER Device Settings reduce errors when printing complex jobs from applications that use PostScript formatting. Note that if you select Allow data passthrough, EMF spooling is not available in the Advanced tab. If you select PDF as the PDL, you can click Settings to open the PDF Settings - Kyocera FS-1370DN | FS-1370DN Printer Driver User Guide Rev-12.8 - Page 26
- 4.x. 128 Bit This encryption option provides high level security for a PDF document. It is supported for Adobe Acrobat and Adobe Reader 5.0 or later. Passwords Select passwords for changing security settings and Settings. 3 In the PDF Settings dialog box, select Print and save. 2-10 User Guide - Kyocera FS-1370DN | FS-1370DN Printer Driver User Guide Rev-12.8 - Page 27
for this driver or one from another manufacturer. If media source macros exist for the older driver, then the alignment of media source values maintains support without the need to change the macros. Setting Media Sources Use the Driver Info utility (\Utility\Driver Info\DrvInfo.exe) to compare the - Kyocera FS-1370DN | FS-1370DN Printer Driver User Guide Rev-12.8 - Page 28
as the PDL. 1 In Device Settings, click Kyocera logo > Plug-in. 2 Select a plug-in module from the list and click Delete, then Yes. 2-12 User Guide - Kyocera FS-1370DN | FS-1370DN Printer Driver User Guide Rev-12.8 - Page 29
3 Click OK in all dialog boxes. Device Settings KX DRIVER 2-13 - Kyocera FS-1370DN | FS-1370DN Printer Driver User Guide Rev-12.8 - Page 30
settings can be saved as a group, called a profile, and applied to any print job. Profiles support common printing tasks. The Administrator can set the view of the Quick Print tab through the Installation process, in the printed job. EcoPrint does not increase print speed. Collate 3-1 User Guide - Kyocera FS-1370DN | FS-1370DN Printer Driver User Guide Rev-12.8 - Page 31
KX DRIVER Quick Print This icon changes the ordering of the printed pages. The page ordering sequence can either be 123, 123, 123, or 111, 222, 333, and so on. Print on both sides This icon changes between duplex printing for flipping on the long edge, duplex printing for flipping on the short edge - Kyocera FS-1370DN | FS-1370DN Printer Driver User Guide Rev-12.8 - Page 32
settings of a selected profile. Editing a Profile The Edit button lets you make changes to an existing profile. The Factory Default profile cannot be edited. 3-3 User Guide - Kyocera FS-1370DN | FS-1370DN Printer Driver User Guide Rev-12.8 - Page 33
KX DRIVER Quick Print 1 In any tab, click Profiles. 2 In the Select profile section, select the profile to be edited, and click Edit. 3 Any of the three options can be edited: name, icon and description. Click OK to save the edited changes. The newly edited profile appears in the Profiles dialog - Kyocera FS-1370DN | FS-1370DN Printer Driver User Guide Rev-12.8 - Page 34
Quick Print 3 The Export Profile dialog box appears. Name and save the profile. 4 Click OK to close the Profiles dialog box. 3-5 User Guide - Kyocera FS-1370DN | FS-1370DN Printer Driver User Guide Rev-12.8 - Page 35
4 Basic In the Basic tab, you can specify the most commonly used printer driver settings. Basic Paper Settings The Basic tab contains several settings for the most commonly used printing tasks. Print size This setting sets the size of the area that the printer prints to, regardless of the actual - Kyocera FS-1370DN | FS-1370DN Printer Driver User Guide Rev-12.8 - Page 36
Transparencies, labels, and envelopes must be supplied from the MP tray. Ensure the paper is properly loaded by following the instructions outlined in the printing system's Operation Guide. Note: Source and Media type are separate items in the dialog box, but can be combined using the Combine source - Kyocera FS-1370DN | FS-1370DN Printer Driver User Guide Rev-12.8 - Page 37
Basic Creating a Custom Page Size To use custom page sizes, they must be created and added to the Print size list. The driver supports a maximum of twenty custom sizes. 1 In the Basic tab, click Page Sizes. 2 Click New. 3 A default custom name appears in the Name box. Type a name for - Kyocera FS-1370DN | FS-1370DN Printer Driver User Guide Rev-12.8 - Page 38
page by set. For example, with Collate selected, three copies of a five-page document outputs as pages one through five in succession, three times. User Guide - Kyocera FS-1370DN | FS-1370DN Printer Driver User Guide Rev-12.8 - Page 39
Basic The printer driver automatically overrides the application's Collate setting and uses the printer driver setting. You can use the application's Collate setting by clearing the Ignore application collation check box in the Compatibility Settings dialog box accessed from Device Settings. - Kyocera FS-1370DN | FS-1370DN Printer Driver User Guide Rev-12.8 - Page 40
Basic Click OK to close the driver information dialog boxes. 4-6 User Guide - Kyocera FS-1370DN | FS-1370DN Printer Driver User Guide Rev-12.8 - Page 41
5 Layout In the Layout tab, you can arrange document data on printed pages without affecting the original document. Booklet KX DRIVER Booklet prints a two-page layout on both sides of each sheet of paper. You can fold and bind the booklet in the center. Folded booklets are half the size of the - Kyocera FS-1370DN | FS-1370DN Printer Driver User Guide Rev-12.8 - Page 42
. The Poster feature lets you create a document to a size that is larger than the paper your printer can support. You can print a poster, or banner, up to 25 times larger than the original document. Segments of the appearance is improved when the edges overlap slightly. Select the 5-2 User Guide - Kyocera FS-1370DN | FS-1370DN Printer Driver User Guide Rev-12.8 - Page 43
. Assemble each sheet edge to the same numbered edge on another sheet. Use Print format to print a proof sheet, along with the poster, to guide you in assembling the printed poster sheets. Poster pages This selection prints all of the sheets to be assembled as a poster. Proof sheet This selection - Kyocera FS-1370DN | FS-1370DN Printer Driver User Guide Rev-12.8 - Page 44
to fit. 4 Click OK to save gutter settings, then click OK again to return to the Print dialog box. 5 Click OK to start printing. 5-4 User Guide - Kyocera FS-1370DN | FS-1370DN Printer Driver User Guide Rev-12.8 - Page 45
Quality In the Imaging tab, select a Print quality from the list. The number of selections in Print quality depends on the number of resolutions supported by the printing system. High quality, Proof, Draft Select one of these settings to print from the highest to the lowest print resolution. Proof - Kyocera FS-1370DN | FS-1370DN Printer Driver User Guide Rev-12.8 - Page 46
accessed through an application interface or through a common font dialog box. Device fonts are stored either permanently or temporarily in the printing system memory. 6-2 User Guide - Kyocera FS-1370DN | FS-1370DN Printer Driver User Guide Rev-12.8 - Page 47
font is not available to a printing system. Font substitution may be critical for output of documents to printing systems that are not well supported by a large font inventory. Setting Font Substitution You can use one font in place of another. 1 In Imaging > Font Settings, select Substitute with - Kyocera FS-1370DN | FS-1370DN Printer Driver User Guide Rev-12.8 - Page 48
printed patterns and fills do not match the appearance of that on the screen, use Pattern scaling to select a different density of printed dots. User Guide - Kyocera FS-1370DN | FS-1370DN Printer Driver User Guide Rev-12.8 - Page 49
KX DRIVER Imaging In the Imaging tab, click Graphics to open the Graphics settings dialog box and access the Pattern scaling settings. Auto (default setting) This setting prints patterns and fills to match the on-screen appearance. Coarse This setting prints patterns and fills with the fewest - Kyocera FS-1370DN | FS-1370DN Printer Driver User Guide Rev-12.8 - Page 50
Round for images with light tints and highlighted areas. Line Used for special effect. Select Line to change the effect by selecting a different angle. User Guide - Kyocera FS-1370DN | FS-1370DN Printer Driver User Guide Rev-12.8 - Page 51
Imaging 4 Select Increase accuracy of screens for better print quality, possibly increasing print time. 5 Click OK to return to the Print dialog box. 6 Click OK to start printing. Adjusting Grayscale The grayscale adjustment settings change the Brightness and Contrast of graphics. These settings are - Kyocera FS-1370DN | FS-1370DN Printer Driver User Guide Rev-12.8 - Page 52
cover to specify what type of paper or other media to use for the covers. 3 Click OK to return to the Print dialog box. 7-1 User Guide - Kyocera FS-1370DN | FS-1370DN Printer Driver User Guide Rev-12.8 - Page 53
4 Click OK to start printing. Cover Mode Options Check Box Selection Front Publishing Cover Insertion Type Inserts a blank front cover. Front Front outside Prints on the outside surface of the front cover. Front Front inside Prints on the inside surface of the front cover. Front Front outside - Kyocera FS-1370DN | FS-1370DN Printer Driver User Guide Rev-12.8 - Page 54
a blank back cover. Front and back Front outside Front inside 7-3 Prints on both sides of the front cover and inserts a blank back cover. - continued User Guide - Kyocera FS-1370DN | FS-1370DN Printer Driver User Guide Rev-12.8 - Page 55
Check Box Selection Front and back Back inside Publishing Cover Insertion Type Prints on the inside surface of the back cover and inserts a blank front cover. Front and back Back outside Prints on the outside surface of the back cover and inserts a blank front cover. Front and back Back inside - Kyocera FS-1370DN | FS-1370DN Printer Driver User Guide Rev-12.8 - Page 56
type of the inserted page or the source paper cassette. 5 Click OK to return to the Print dialog box. 6 Click OK to start printing. 7-5 User Guide - Kyocera FS-1370DN | FS-1370DN Printer Driver User Guide Rev-12.8 - Page 57
Page Insertion Options Check Box Selection Page insert Publishing Page Insertion Type Inserts a blank page. Page insert Print onto front Prints on the front side of the inserted page. Page insert Print onto back Prints on the back side of the inserted page. Page insert Print onto front Print - Kyocera FS-1370DN | FS-1370DN Printer Driver User Guide Rev-12.8 - Page 58
. The printing system's operation panel prompts you to load transparencies into the MP tray, and, if necessary, load backing paper into the selected cassette. 7-7 User Guide - Kyocera FS-1370DN | FS-1370DN Printer Driver User Guide Rev-12.8 - Page 59
programming commands from the printer resident PRESCRIBE language. The Product Library CD includes a PRESCRIBE command language reference guide. A command file is a set of instructions the printing system interprets to produce a given output. For example, a Prologue/Epilogue command file may contain - Kyocera FS-1370DN | FS-1370DN Printer Driver User Guide Rev-12.8 - Page 60
only if PCL 5e is selected in the PDL Settings dialog box. With a command file selected in the list, choose one insertion point option: User Guide - Kyocera FS-1370DN | FS-1370DN Printer Driver User Guide Rev-12.8 - Page 61
Advanced Unassigned The selected command file is not inserted into the print job. This selection can be used when you are working with multiple command files and want to use some but not others. Select Unassigned for the command files you do not want to use in the print job. Beginning of the print - Kyocera FS-1370DN | FS-1370DN Printer Driver User Guide Rev-12.8 - Page 62
boxes, click OK. Selecting Pages for Watermark The Page selection option for Watermark enables you to choose the location for watermarks in your document. 8-4 User Guide - Kyocera FS-1370DN | FS-1370DN Printer Driver User Guide Rev-12.8 - Page 63
Advanced 1 In Advanced > Watermark, under Select watermark, choose a default or custom watermark to print. 2 Under Page selection, choose pages for printing the watermark: All pages This option prints the watermark on each document page. First page only This option prints the watermark on the first - Kyocera FS-1370DN | FS-1370DN Printer Driver User Guide Rev-12.8 - Page 64
Explorer where the document content fills the entire page. The security watermark is printed over the document data so that it can appear in a User Guide - Kyocera FS-1370DN | FS-1370DN Printer Driver User Guide Rev-12.8 - Page 65
KX DRIVER Advanced photocopy. When editing an image, or if Device Settings > PDL Settings > GDI compatible mode is selected, Overprint is selected automatically. 9 Adjust the calibration. After adjusting calibration, in all dialog boxes click OK. Adjusting Security Watermark Calibration For a - Kyocera FS-1370DN | FS-1370DN Printer Driver User Guide Rev-12.8 - Page 66
Status Monitor displays printing system status messages in the lower right corner of the window during printing. You can start a status monitor for each supported printing system. More than one status monitor can be displayed at one time. 1 In the Advanced tab, click Status Monitor. 2 If you want - Kyocera FS-1370DN | FS-1370DN Printer Driver User Guide Rev-12.8 - Page 67
KX DRIVER Advanced 3 To view the print job status without changing the Status Monitor setting, click Open Status Monitor. The Status Monitor image appears in the lower right corner of your computer screen. 4 Move the pointer over the Status Monitor image to display balloon-style status messages - Kyocera FS-1370DN | FS-1370DN Printer Driver User Guide Rev-12.8 - Page 68
is still printing the document. Note: EMF spooling is not available when Allow data passthrough is selected in the PDL Settings dialog box. 8-10 User Guide - Kyocera FS-1370DN | FS-1370DN Printer Driver User Guide Rev-12.8 - Page 69
Advanced Selecting EMF Spooling To print with EMF spooling: 1 From the Advanced tab, select the EMF Spooling check box. 2 Click OK and continue the printing process as usual. Enable Client Profile Client profile refers to profile settings saved on a client computer. You have the choice to use your - Kyocera FS-1370DN | FS-1370DN Printer Driver User Guide Rev-12.8 - Page 70
. Note: To reset the printer driver to default settings, select the Factory Default profile, and click Apply. This clears the settings of a selected profile. 9-1 User Guide - Kyocera FS-1370DN | FS-1370DN Printer Driver User Guide Rev-12.8 - Page 71
Profiles Editing a Profile The Edit button lets you make changes to an existing profile. The Factory Default profile cannot be edited. 1 In any tab, click Profiles. 2 In the Select profile section, select the profile to be edited, and click Edit. 3 Any of the three options can be edited: name, icon - Kyocera FS-1370DN | FS-1370DN Printer Driver User Guide Rev-12.8 - Page 72
be exported, and click Export. 3 The Export Profile dialog box appears. Name and save the profile. 4 Click OK to close the Profiles dialog box. 9-3 User Guide - Kyocera FS-1370DN | FS-1370DN Printer Driver User Guide Rev-12.8 - Page 73
printable file. Gutter Blank space on the left side or top of a printed page that can be increased by scaling down text and graphics. This supports stapling and hole punching. When used with Duplex printing, the enlarged blank space lines up evenly on both sides of the sheet. The larger blank - Kyocera FS-1370DN | FS-1370DN Printer Driver User Guide Rev-12.8 - Page 74
extend the driver's capabilities. Poster Layout feature for printing a document in a larger size than the maximum supported by the printer so the cumulative sheets can be assembled as a poster. Use this feature to print as a logo or a signature, at a specific point in the print job. v User Guide - Kyocera FS-1370DN | FS-1370DN Printer Driver User Guide Rev-12.8 - Page 75
predefined printer profile, rather than having to go to various tabs. Quick Print settings can be captured in a group called a profile. Profiles support common printing tasks, saving you from having to repeatedly select the same settings. The Administrator can set the view of the Quick Print tab - Kyocera FS-1370DN | FS-1370DN Printer Driver User Guide Rev-12.8 - Page 76
KYOCERA MITA AMERICA, INC. Headquarters: 225 Sand Road Fairfield, New Jersey 07004-0008 Telephone: (973) 808-8444 Fax: (973) 882-6000 New York Branch: 1410 Broadway, 23rd Floor New York, NY 10018 Telephone: (917) 286-5400 Fax: (917) 286-5402 Northeastern Region: 225 Sand Road Fairfield, New Jersey - Kyocera FS-1370DN | FS-1370DN Printer Driver User Guide Rev-12.8 - Page 77
KYOCERA MITA EUROPE B.V. Hacksteen 40, 2132 MS Hoofddorp The Netherlands Telephone: +31.20.654.0000 Home page: http://www.kyoceramita-europe.com Email: [email protected] Kyocera Mita Nederland B.V. Beechavenue 25, 1119RA Schiphol-Rijk The Netherlands Telephone: +31.20.58.77.200 Kyocera - Kyocera FS-1370DN | FS-1370DN Printer Driver User Guide Rev-12.8 - Page 78
KYOCERA MITA Corporation Headquarters: 2-28, 1-chome, Tamatsukuri, Chuo-ku Osaka 540-8585, Japan Telephone: (06) 6764-3555 http://www.kyoceramita.com Kyocera Mita Australia Pty, LTD. Level 3, 6-10 Talavera Road, North Ryde, N.S.W. 2113 Australia Telephone: (02) 9888.9999 Kyocera Mita New Zealand LTD - Kyocera FS-1370DN | FS-1370DN Printer Driver User Guide Rev-12.8 - Page 79
Rev. 12.8_100