Kyocera FS-9130DN FS-9130DN/9530DN Operation Guide (Basic) Rev-1.3
Kyocera FS-9130DN Manual
View all Kyocera FS-9130DN manuals
Add to My Manuals
Save this manual to your list of manuals |
Kyocera FS-9130DN manual content summary:
- Kyocera FS-9130DN | FS-9130DN/9530DN Operation Guide (Basic) Rev-1.3 - Page 1
FS-9130DN FS-9530DN Operation Guide - Kyocera FS-9130DN | FS-9130DN/9530DN Operation Guide (Basic) Rev-1.3 - Page 2
- Kyocera FS-9130DN | FS-9130DN/9530DN Operation Guide (Basic) Rev-1.3 - Page 3
1-4 2 Printing Operation...2-1 Loading Printer Driver ...2-2 Printing from Application Software 2-3 3 Maintenance ...3-1 General Information ...3-2 Toner Container Replacement ...3-3 Cleaning the Printer ...3-11 4 Troubleshooting ...4-1 General Guideline ...4-2 Print Quality Problems - Kyocera FS-9130DN | FS-9130DN/9530DN Operation Guide (Basic) Rev-1.3 - Page 4
ii OPERATION GUIDE - Kyocera FS-9130DN | FS-9130DN/9530DN Operation Guide (Basic) Rev-1.3 - Page 5
or in connection with the sale of the page printer, are protected by copyright. All rights are reserved. Copying or other reproduction of all or part of this guide, any copyrightable subject matter without the prior written consent of Kyocera Mita Corporation is prohibited. Any copies made of all or - Kyocera FS-9130DN | FS-9130DN/9530DN Operation Guide (Basic) Rev-1.3 - Page 6
River Systems. This product contains UFST™ and MicroType® from Monotype Imaging Inc. This product has been certified by the USB Implementers Forum, Inc. iv OPERATION GUIDE - Kyocera FS-9130DN | FS-9130DN/9530DN Operation Guide (Basic) Rev-1.3 - Page 7
License Under this license, you may use the Programs only with the device on which they are installed and transfer possession of the Programs and the device to another party. If you transfer the Programs, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. OPERATION GUIDE v - Kyocera FS-9130DN | FS-9130DN/9530DN Operation Guide (Basic) Rev-1.3 - Page 8
laws of the Province of Ontario. Otherwise, this license is governed by the laws of the country in which you acquired the Program. vi OPERATION GUIDE - Kyocera FS-9130DN | FS-9130DN/9530DN Operation Guide (Basic) Rev-1.3 - Page 9
Agreement, you have the right to use the Fonts on up to three printers. If you need to have access to the fonts on more than three printers, you need to acquire a multi-user license agreement which can be obtained that the Software is free from all bugs, errors and omissions. OPERATION GUIDE vii - Kyocera FS-9130DN | FS-9130DN/9530DN Operation Guide (Basic) Rev-1.3 - Page 10
, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may - Kyocera FS-9130DN | FS-9130DN/9530DN Operation Guide (Basic) Rev-1.3 - Page 11
particular installation. If used for the receiver. • Consult your service technician or an experienced radio/TV technician modifications without prior permission of Kyocera may cause harmful interference. If equipment without prior permission of Kyocera, Kyocera as the manufacturer does not guarantee - Kyocera FS-9130DN | FS-9130DN/9530DN Operation Guide (Basic) Rev-1.3 - Page 12
. Radio Frequency Transmitter This machine contains the transmitter module. We, the manufacturer (Kyocera Mita Corporation) hereby declare that this equipment (page printer), model FS-9130DN and FS-9530DN are in compliance with the essential requirements and other relevant provisions of Directive - Kyocera FS-9130DN | FS-9130DN/9530DN Operation Guide (Basic) Rev-1.3 - Page 13
High temperature inside. Do not touch parts in this area, because there is a danger of getting burned. Do not incinerate toner and toner container. Dangerous sparks may cause burn. Label inside the printer (Laser radiation warning) OPERATION GUIDE Moving parts inside. May cause personal injury - Kyocera FS-9130DN | FS-9130DN/9530DN Operation Guide (Basic) Rev-1.3 - Page 14
gas to less than 0.1ppm, we recommend you not to install the printer in a confined area where ventilation is blocked. Declaration of Conformity for U.S.A. Model name: Page Printer FS-9130DN/FS-9530DN Trade name: Kyocera Mita Responsible party: Kyocera Mita America, Inc. Address: 225 Sand Road PO Box - Kyocera FS-9130DN | FS-9130DN/9530DN Operation Guide (Basic) Rev-1.3 - Page 15
Kyocera Mita Corporation Manufacturer's address: 2-28, 1-Chome, Tamatsukuri, Chuo-ku, Osaka, 540-8585, Japan Declares that the product Product name: Page Printer Model number: FS-9130DN/FS-9530DN by the authorities concerned. User's instruction that conforms to the applicable specifications. - Kyocera FS-9130DN | FS-9130DN/9530DN Operation Guide (Basic) Rev-1.3 - Page 16
) Manufacturer: Kyocera Mita Corporation Manufacturer's address: 2-28, 1-Chome, Tamatsukuri, Chuo-ku, Osaka, 540-8585, Japan declares that the product Product name: Page Printer Model name: FS-9130DN/FS-9530DN Description of devices: This Page Printer Model FS-9530DN is the 51ppm (FS-9130DN is - Kyocera FS-9130DN | FS-9130DN/9530DN Operation Guide (Basic) Rev-1.3 - Page 17
EN ISO 7779. Disclaimer Kyocera Mita will not be liable to printer was last used, as well as a Sleep Mode where printer printing, it is possible to lower the amount of paper used. Recycled Paper This printer supports recycled paper which reduces the load on the environment. Your sales or service - Kyocera FS-9130DN | FS-9130DN/9530DN Operation Guide (Basic) Rev-1.3 - Page 18
Energy Star (ENERGY STAR®) Program We have determined as a participating company in the International Energy Star Program that this product is compliant with the standards laid out in the International Energy Star Program. xvi OPERATION GUIDE - Kyocera FS-9130DN | FS-9130DN/9530DN Operation Guide (Basic) Rev-1.3 - Page 19
the machine. Keep it close to the machine for easy reference. The sections of this guide and parts of the machine marked with symbols are safety warnings meant to protect the user, other result from insufficient attention to or incorrect compliance with the related points. OPERATION GUIDE xvii - Kyocera FS-9130DN | FS-9130DN/9530DN Operation Guide (Basic) Rev-1.3 - Page 20
power plug from the outlet] .... [Always connect the machine to an outlet with a ground connection] Please contact your service representative to order a replacement if the safety warnings in this Operation Guide are illegible or if the guide itself is missing. (fee required) xviii OPERATION - Kyocera FS-9130DN | FS-9130DN/9530DN Operation Guide (Basic) Rev-1.3 - Page 21
Installation facilitate changing of parts and maintenance, allow access space as shown below. Leave adequate space, especially around the vents, to allow air to be properly ventilated out of the printer caster stoppers to stabilize the printer once it is in place Install - Kyocera FS-9130DN | FS-9130DN/9530DN Operation Guide (Basic) Rev-1.3 - Page 22
installed on the printer, moving the printer can cause damage to certain floor surfaces. During printing printer is used over a long period of time in a poorly ventilated room or when printing environment for print work, it not possible, contact your service representative. Other Precautions Connect - Kyocera FS-9130DN | FS-9130DN/9530DN Operation Guide (Basic) Rev-1.3 - Page 23
Handling of Plastic Bags WARNING: Keep the plastic bags that are used with the machine away from children. The plastic may cling to their nose and mouth causing suffocation. OPERATION GUIDE xxi - Kyocera FS-9130DN | FS-9130DN/9530DN Operation Guide (Basic) Rev-1.3 - Page 24
to avoid the danger of fire or electrical shock. Then contact your service representative. Do not remove or connect the power plug with wet hands, as there is a danger of electrical shock. Always contact your service representative for maintenance or repair of internal parts. xxii OPERATION GUIDE - Kyocera FS-9130DN | FS-9130DN/9530DN Operation Guide (Basic) Rev-1.3 - Page 25
use. When lifting or moving the printer, pull up the 4 handles on both sides of the printer, then ALWAYS carry the printer by the designated 4 handles with at or other trouble. It is therefore recommended that you consult with your service representative in regard to cleaning of internal parts. This - Kyocera FS-9130DN | FS-9130DN/9530DN Operation Guide (Basic) Rev-1.3 - Page 26
during printing. When lifting or moving the machine, contact your service representative. Do not touch electrical parts, such as connectors or printed happen to get toner in your eyes, flush them thoroughly with water. If there is any remaining tenderness, contact a physician. xxiv OPERATION GUIDE - Kyocera FS-9130DN | FS-9130DN/9530DN Operation Guide (Basic) Rev-1.3 - Page 27
the Toner Container in accordance with Federal, State and Local rules and regulations. Store all consumables in a cool, dark location. If the machine will not be used for an extended period of time, remove the paper from the cassette, return it to its original package and reseal it. OPERATION GUIDE - Kyocera FS-9130DN | FS-9130DN/9530DN Operation Guide (Basic) Rev-1.3 - Page 28
xxvi OPERATION GUIDE - Kyocera FS-9130DN | FS-9130DN/9530DN Operation Guide (Basic) Rev-1.3 - Page 29
names of parts. 2 Printing Operation This chapter explains how to print from your workstation. 3 Maintenance This chapter explains how to replace the toner container, waste toner box, and how to care for your printer. 4 Troubleshooting This chapter explains how to handle printer problems that may - Kyocera FS-9130DN | FS-9130DN/9530DN Operation Guide (Basic) Rev-1.3 - Page 30
manual uses the following conventions: Convention Italic Typeface Courier Typeface Bracket Bold Text Typeface Bold Typeface Notes Important Caution Warning Description Example Used to emphasize a key Close the top cover. word, phrase or references to Refer to Toner . xxvi OPERATION GUIDE - Kyocera FS-9130DN | FS-9130DN/9530DN Operation Guide (Basic) Rev-1.3 - Page 31
functions of these parts for correct use and optimal performance. This chapter contains explanations on the following topics: • Components at the Front of the Printer 1-2 • Components at the Left and the Rear of the Printer.... 1-3 • Components at the Right of the Printer 1-4 OPERATION GUIDE 1-1 - Kyocera FS-9130DN | FS-9130DN/9530DN Operation Guide (Basic) Rev-1.3 - Page 32
Parts Components at the Front of the Printer 11 12 1 10 9 8 13 14 2 7 3 6 4 5 1 Operation Panel 2 Front Cover 3 Paper Cassette 2 4 Paper Guide 5 Paper Stopper 6 Paper Cassette 1 7 Handles for Transport 8 MP (Multi-Purpose) Tray 9 Main Switch 10 Top Tray 11 Toner Container 12 Toner - Kyocera FS-9130DN | FS-9130DN/9530DN Operation Guide (Basic) Rev-1.3 - Page 33
Components at the Left and the Rear of the Printer 16 15 15 Power Cord Connector 16 Option Unit Connector 17 Handles for Transport 18 Left Cover 2 19 Lock Lever 20 Left Cover 1 Machine Parts 20 19 18 17 OPERATION GUIDE 1-3 - Kyocera FS-9130DN | FS-9130DN/9530DN Operation Guide (Basic) Rev-1.3 - Page 34
Machine Parts Components at the Right of the Printer 21 22 23 24 25 26 27 28 21 Memory Card Slot 22 Option Interface Slot (OPT) 23 Option Memory Slot Cover 24 USB Memory - Kyocera FS-9130DN | FS-9130DN/9530DN Operation Guide (Basic) Rev-1.3 - Page 35
2 Printing Operation This chapter contains explanations on the following topics: • Loading Printer Driver 2-2 • Printing from Application Software 2-3 OPERATION GUIDE 2-1 - Kyocera FS-9130DN | FS-9130DN/9530DN Operation Guide (Basic) Rev-1.3 - Page 36
Printing Operation Loading Printer Driver Ensure the printer is plugged in and connected to the PC before installing the printer driver from the CD-ROM. 1 Switch on the PC and activate Windows. NOTE: If the Welcome to the Found New Hardware Wizard dialog box displays, select - Kyocera FS-9130DN | FS-9130DN/9530DN Operation Guide (Basic) Rev-1.3 - Page 37
Load the paper required into the paper cassette. 2 From the application File menu, select Print. The Print dialog box displays. 3 Click the drop down list of printer names. All the printers installed in Windows are listed. Click the name of the machine. 4 Use Number of copies to enter the number of - Kyocera FS-9130DN | FS-9130DN/9530DN Operation Guide (Basic) Rev-1.3 - Page 38
Printing Operation 2-4 OPERATION GUIDE - Kyocera FS-9130DN | FS-9130DN/9530DN Operation Guide (Basic) Rev-1.3 - Page 39
3 Maintenance This chapter contains explanations on the following topics: • General Information 3-2 • Toner Container Replacement 3-3 • Cleaning the Printer 3-11 OPERATION GUIDE 3-1 - Kyocera FS-9130DN | FS-9130DN/9530DN Operation Guide (Basic) Rev-1.3 - Page 40
Maintenance General Information This chapter describes basic maintenance tasks you can perform on the printer. You can replace the following component according to the printer's display: • Toner Container • Waste Toner Box Also, the internal parts need periodic cleaning. 3-2 OPERATION GUIDE - Kyocera FS-9130DN | FS-9130DN/9530DN Operation Guide (Basic) Rev-1.3 - Page 41
after. If you continue to use the printer, eventually the toner supply will be exhausted at which point the printer will stop printing and the Replace toner Clean printer message will be shown instructing you to install a new toner kit. Frequency of toner container replacement Assuming an average - Kyocera FS-9130DN | FS-9130DN/9530DN Operation Guide (Basic) Rev-1.3 - Page 42
is to avoid damaging media by the magnetism of toner. You do not have to turn printer power off before starting the replacement. Any data that may be under printing process in the printer will be deleted if you turn printer power off. 1 Open the printer front cover all the way. 2 Push the lock lever - Kyocera FS-9130DN | FS-9130DN/9530DN Operation Guide (Basic) Rev-1.3 - Page 43
Maintenance 3 Grasp the handle on the toner container, push the lock lever up again and gently lift the toner container. 4 Seal up the old toner container with the supplied plastic bag and dispose of it. 5 Lightly tap the new toner on the top 5 to 6 times. OPERATION GUIDE 3-5 - Kyocera FS-9130DN | FS-9130DN/9530DN Operation Guide (Basic) Rev-1.3 - Page 44
Maintenance 6 Thoroughly shake the toner container (in the direction of the arrows) ten times or more to loosen and mix the toner inside. 7 Grasp the handle on the toner container and insert the toner container along the rail of the printer. When inserting, be sure that the gear side of the toner - Kyocera FS-9130DN | FS-9130DN/9530DN Operation Guide (Basic) Rev-1.3 - Page 45
Maintenance 8 Hold the toner container using both hands and fully insert it into the printer. 9 Close the front cover. Replacing the Waste Toner Box When replacing the toner container, the used waste toner box in the printer should also be replaced with the new one from the new toner kit. The - Kyocera FS-9130DN | FS-9130DN/9530DN Operation Guide (Basic) Rev-1.3 - Page 46
Maintenance 3 Peel sticker A off the waste toner box. 4 Turn around the waste toner box. Stick sticker A over the opening at the back. 5 Peel off the backing paper to gain access to sticker B. 3-8 OPERATION GUIDE - Kyocera FS-9130DN | FS-9130DN/9530DN Operation Guide (Basic) Rev-1.3 - Page 47
6 Peel sticker B off the waste toner box. Maintenance 7 Stick sticker B down over top of sticker A at the back. 8 Seal up the old waste toner box with the supplied plastic bag and dispose of it. OPERATION GUIDE 3-9 - Kyocera FS-9130DN | FS-9130DN/9530DN Operation Guide (Basic) Rev-1.3 - Page 48
Maintenance 9 Fit the new waste toner box to the printer. 10 Close the front cover. 3-10 OPERATION GUIDE - Kyocera FS-9130DN | FS-9130DN/9530DN Operation Guide (Basic) Rev-1.3 - Page 49
Maintenance Cleaning the Printer Cleaning the Filters When replacing the toner container, also clean the filters. 1 Open the MP tray. 2 Remove the filters from the printer. Press in the tabs on the top filter while removing it. 3 Press in the tab on the right filter while removing it. OPERATION - Kyocera FS-9130DN | FS-9130DN/9530DN Operation Guide (Basic) Rev-1.3 - Page 50
Maintenance 4 Clean the filters using a vacuum cleaner or a dry cloth. Do not wash the filters nor use the cleaning brush supplied with the machine. 5 After cleaning, replace the filters in their original positions. 3-12 After cleaning the filters, proceed to next section. OPERATION GUIDE - Kyocera FS-9130DN | FS-9130DN/9530DN Operation Guide (Basic) Rev-1.3 - Page 51
Maintenance The Inside of the Printer To avoid print quality problems, the interior of the printer must be cleaned. 1 Open the front cover all the way. 2 Remove the blue colored cleaning brush. 3 Pull up the lock lever on the left side of the printer, and open the left cover 1. OPERATION GUIDE 3- - Kyocera FS-9130DN | FS-9130DN/9530DN Operation Guide (Basic) Rev-1.3 - Page 52
Maintenance 4 Clean the separator by moving the cleaning brush from left to right along with the separator. NOTE: When removing jammed paper, be careful not to touch the printer drum. This can cause printer malfunction. 5 space, and close the left cover 1 and the front cover. 3-14 OPERATION GUIDE - Kyocera FS-9130DN | FS-9130DN/9530DN Operation Guide (Basic) Rev-1.3 - Page 53
4 Troubleshooting This chapter explains how to handle printer problems that may occur. If a problem cannot be corrected, contact your service representative. This chapter explains the following topics: • General Guideline 4-2 • Print Quality Problems 4-4 • Indicators and Messages 4-7 • Correcting - Kyocera FS-9130DN | FS-9130DN/9530DN Operation Guide (Basic) Rev-1.3 - Page 54
Troubleshooting General Guideline If some kind of problem should occur, check the following before concluding the printer is broken; Symptom Check Items Corrective Action The printer will not print from the computer. Check the READY indicator. Off Flashing Look through the items below and - Kyocera FS-9130DN | FS-9130DN/9530DN Operation Guide (Basic) Rev-1.3 - Page 55
seconds. Then, turn on the printer. • Reboot the computer which sends the print jobs to the printer. • Obtain and use the latest version of the printer driver. The latest versions of printer drivers and utilities are available at: http://www.kyoceramita.com/download/. • Make sure that the procedures - Kyocera FS-9130DN | FS-9130DN/9530DN Operation Guide (Basic) Rev-1.3 - Page 56
such as blank output. The troubleshooting procedure for each type of problem is explained below. If you still cannot solve the problem, contact your service representative. Printed Results Completely blank printout Corrective Action Check the toner container. Open the printer front cover and check - Kyocera FS-9130DN | FS-9130DN/9530DN Operation Guide (Basic) Rev-1.3 - Page 57
and stops after approx.6 minutes. The printer reverts to Ready. Check the operation panel. If the Toner low message is displayed and the ATTENTION indicator is flashing, install a new toner kit. Refer to Toner Container Replacement on page 3-3. Check the print density. Display the print density - Kyocera FS-9130DN | FS-9130DN/9530DN Operation Guide (Basic) Rev-1.3 - Page 58
Troubleshooting Printed Results Dirt on the top edge or back of the paper Characters out of position Corrective Action Check the paper ramp. Open the printer left cover and check for toner on the paper ramp. Clean the paper ramp using a soft, dry, lintfree cloth. Refer to Toner Container - Kyocera FS-9130DN | FS-9130DN/9530DN Operation Guide (Basic) Rev-1.3 - Page 59
occurs.) Off Operations are normal. Maintenance Messages The following table lists maintenance messages that you can deal with by yourself. If Call service person appears, turn off the printer, disconnect the power cord, and contact your Kyocera Mita dealer. Message Corrective Action Add paper - Kyocera FS-9130DN | FS-9130DN/9530DN Operation Guide (Basic) Rev-1.3 - Page 60
Troubleshooting Message Corrective Action Call service ####:0123456 #### represents a mechanical error (#=0, 1, 2, ...). Call for service. The printer does not operate when this message is displayed. The total number of pages printed is also indicated, e.g. 0123456. Cassette # not loaded A - Kyocera FS-9130DN | FS-9130DN/9530DN Operation Guide (Basic) Rev-1.3 - Page 61
. Install MK The maintenance kit (MK-710 for FS-9130DN and FS-9530DN) needs to be replaced. Folding tray paper full Load cassette # (paper size)/(paper type)* Replace the maintenance kit since the total number of printed pages has reached 500,000. Call for service. The maintenance kit includes - Kyocera FS-9130DN | FS-9130DN/9530DN Operation Guide (Basic) Rev-1.3 - Page 62
printing into the top tray. The installed toner container is displayed if determined not to be an original Kyocera toner container by the self-diagnostic performed after power is switched on. If a toner container which indicates Toner low or Replace toner Clean printer is installed to other printers - Kyocera FS-9130DN | FS-9130DN/9530DN Operation Guide (Basic) Rev-1.3 - Page 63
number of fonts and macros downloaded. Print a status page to see how much user memory is left, and try deleting unnecessary fonts and macros. ;Ò:Alarm buzzer sounds when an error occurs. Press [CANCEL] to stop the alarm buzzer. Error Messages The following table lists error messages that can be - Kyocera FS-9130DN | FS-9130DN/9530DN Operation Guide (Basic) Rev-1.3 - Page 64
driver. You have inserted the wrong memory card when the Insert again message was displayed. Remove the wrong memory card from the printer's memory card slot and insert the correct memory card. The printer again reads it from the beginning of the data. Current print processing cannot continue - Kyocera FS-9130DN | FS-9130DN/9530DN Operation Guide (Basic) Rev-1.3 - Page 65
Troubleshooting Message Print overrun Press GO Corrective Action The data transferred to the printer was too complex to print on a page. Press [GO] to resume printing. (The page may break in some pages.) You can abandon printing . Press [CANCEL] to stop the alarm buzzer. OPERATION GUIDE 4-13 - Kyocera FS-9130DN | FS-9130DN/9530DN Operation Guide (Basic) Rev-1.3 - Page 66
Troubleshooting Correcting a Paper Jam The Paper jam message is displayed on the message display when paper becomes stuck in the paper transport system, the paper feed timing is incorrect, or paper fails to feed at all. The jam can be corrected by removing the paper. The printer goes off-line when - Kyocera FS-9130DN | FS-9130DN/9530DN Operation Guide (Basic) Rev-1.3 - Page 67
Troubleshooting Guide When the jammed paper has been removed, open and close the printer's front cover. Then the printer automatically warms up, goes on-line, and continues printing solve the problem by changing the paper, there may be a problem with the printer. Contact your service representative. - Kyocera FS-9130DN | FS-9130DN/9530DN Operation Guide (Basic) Rev-1.3 - Page 68
Troubleshooting Paper Cassette 1 The following procedure also applies to the optional paper feeder. Pull out the paper cassette. Paper Cassette 2 Remove the jammed paper while taking care not to tear it. If the paper has been torn, remove all the scraps from the inside the printer. 3 Close the - Kyocera FS-9130DN | FS-9130DN/9530DN Operation Guide (Basic) Rev-1.3 - Page 69
MP Tray Troubleshooting Paper is jammed at the MP tray. Remove the jammed paper using the procedure given below. 1 Remove the paper jammed at the MP tray next step. Release Lever Inside the MP transport 1 Pull up the lock lever and open left cover 1. Left Cover 1 Lock Lever OPERATION GUIDE 4-17 - Kyocera FS-9130DN | FS-9130DN/9530DN Operation Guide (Basic) Rev-1.3 - Page 70
Troubleshooting 2 Remove the jammed paper. 3 Push the lever (gray colored) to raise the duplex unit and remove the jammed paper. 4 Open the front cover. 4-18 OPERATION GUIDE - Kyocera FS-9130DN | FS-9130DN/9530DN Operation Guide (Basic) Rev-1.3 - Page 71
Troubleshooting 5 Turn the knob clockwise to release the jammed paper from the MP transport tray section. 6 Open left cover 1 to remove paper jammed in the MP transport tray. NOTE: When removing jammed paper, be careful not to touch the printer drum. This can cause printer malfunction. 7 Pull out - Kyocera FS-9130DN | FS-9130DN/9530DN Operation Guide (Basic) Rev-1.3 - Page 72
Troubleshooting 8 Open the MP transport tray cover and remove any jammed paper. 9 If the paper has been torn, remove the jammed paper. 10 Replace the MP transport tray in its original position, then close the front cover. 4-20 OPERATION GUIDE - Kyocera FS-9130DN | FS-9130DN/9530DN Operation Guide (Basic) Rev-1.3 - Page 73
Troubleshooting Jam in Left Cover 1 WARNING: The printer's fixing unit is extremely hot. Take sufficient care when working in this area, as there is a danger of getting burned. CAUTION:Take care not to leave any small pieces of paper in the printer when removing paper jams as this may result in fire - Kyocera FS-9130DN | FS-9130DN/9530DN Operation Guide (Basic) Rev-1.3 - Page 74
Troubleshooting 4 If there is jammed paper in the output section, remove it. 5 Close left cover 1. Left Cover 2 1 Open left cover 2. 4-22 OPERATION GUIDE - Kyocera FS-9130DN | FS-9130DN/9530DN Operation Guide (Basic) Rev-1.3 - Page 75
2 Remove the jammed paper. Troubleshooting 3 Close left cover 2. Document Finisher Paper is jammed at the option document finisher. Remove jammed paper referring to the DF-710 Operation Guide or DF-730 Operation Guide. OPERATION GUIDE 4-23 - Kyocera FS-9130DN | FS-9130DN/9530DN Operation Guide (Basic) Rev-1.3 - Page 76
Troubleshooting 4-24 OPERATION GUIDE - Kyocera FS-9130DN | FS-9130DN/9530DN Operation Guide (Basic) Rev-1.3 - Page 77
FS-9130DN Description FS-9530DN Printing method Printing speed Electrophotography, laser Kyocera Image Refinement) 300 dpi with KIR (Kyocera Image Refinement) Approx. 3.5 seconds or less (During printing 1.1) for USB Flash memory supports PDF Direct Printing Network: 10BASE-T/100BASE-TX Option - Kyocera FS-9130DN | FS-9130DN/9530DN Operation Guide (Basic) Rev-1.3 - Page 78
Ambient conditions Power requirements FS-9130DN 1: Memory card (CF) Performed at power-up 200,000 pages/month Amorphous silicon drum Description FS-9530DN 300,000 pages/month countries) Max. allowable voltage fluctuation: ±10 % Max. allowable frequency fluctuation: ±2 % 5-2 OPERATION GUIDE - Kyocera FS-9130DN | FS-9130DN/9530DN Operation Guide (Basic) Rev-1.3 - Page 79
FS-9130DN Description FS-9530DN Power consumption Operating noise (in accordance with EN ISO 7779 [Bystander Position, sound pressure level at the front, and simplex printing]) Dimensions (W) × (D) × (H) Weight Maximum: 900 W (U.S.A./ Canada), 800 W (European countries) During printing printing: - Kyocera FS-9130DN | FS-9130DN/9530DN Operation Guide (Basic) Rev-1.3 - Page 80
Specifications 5-4 OPERATION GUIDE - Kyocera FS-9130DN | FS-9130DN/9530DN Operation Guide (Basic) Rev-1.3 - Page 81
A1 - Kyocera FS-9130DN | FS-9130DN/9530DN Operation Guide (Basic) Rev-1.3 - Page 82
- Kyocera FS-9130DN | FS-9130DN/9530DN Operation Guide (Basic) Rev-1.3 - Page 83
- Kyocera FS-9130DN | FS-9130DN/9530DN Operation Guide (Basic) Rev-1.3 - Page 84
Rev. 1.3 2007.7 302G156012
Operation Guide
FS-9130DN
FS-9530DN