Kyocera FS-C5025N FS-C5015N/C5025N/5030N Operation Guide Rev-1.0 (Basic)
Kyocera FS-C5025N Manual
View all Kyocera FS-C5025N manuals
Add to My Manuals
Save this manual to your list of manuals |
Kyocera FS-C5025N manual content summary:
- Kyocera FS-C5025N | FS-C5015N/C5025N/5030N Operation Guide Rev-1.0 (Basic) - Page 1
FS-C5015N FS-C5025N FS-C5030N Operation Guide - Kyocera FS-C5025N | FS-C5015N/C5025N/5030N Operation Guide Rev-1.0 (Basic) - Page 2
- Kyocera FS-C5025N | FS-C5015N/C5025N/5030N Operation Guide Rev-1.0 (Basic) - Page 3
Loading Printer Driver 2-2 Printing from Application Software 2-3 3 Maintenance General Information 3-2 Toner Container Replacement 3-3 Cleaning the Printer 3-8 Replacing the Waste Toner Box 3-15 4 Troubleshooting General Guidelines 4-2 Print Quality Problems 4-3 Error Messages - Kyocera FS-C5025N | FS-C5015N/C5025N/5030N Operation Guide Rev-1.0 (Basic) - Page 4
Contents ii OPERATION GUIDE - Kyocera FS-C5025N | FS-C5015N/C5025N/5030N Operation Guide Rev-1.0 (Basic) - Page 5
SUPPORT THE PRINTER'S EMULATION MODE. The printer is factory-set to emulate the PCL. Notice The information in this guide is subject to change without notification. Additional pages may be inserted in future editions. The user is asked to excuse any technical inaccuracies or typographical errors - Kyocera FS-C5025N | FS-C5015N/C5025N/5030N Operation Guide Rev-1.0 (Basic) - Page 6
River Systems. This product contains UFST™ and MicroType® from Monotype Imaging Inc. This product has been certified by the USB Implementers Forum, Inc. iv OPERATION GUIDE - Kyocera FS-C5025N | FS-C5015N/C5025N/5030N Operation Guide Rev-1.0 (Basic) - Page 7
WARRANTIES COVERING THE PROGRAMS (OR CONDITIONS), EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. OPERATION GUIDE v - Kyocera FS-C5025N | FS-C5015N/C5025N/5030N Operation Guide Rev-1.0 (Basic) - Page 8
after the cause of action arose. If you acquired the Program in the United States, this license is governed by the laws of the State of New the Program. Typeface Trademark Acknowledgement All resident fonts in this printer are licensed from Monotype Imaging Inc. Helvetica, Palatino and Times - Kyocera FS-C5025N | FS-C5015N/C5025N/5030N Operation Guide Rev-1.0 (Basic) - Page 9
to use the Fonts on up to three printers. If you need to have access to the fonts on more than three printers, you need to acquire a multi-user does not warrant that the Software is free from all bugs, errors and omissions. 8 THE PARTIES AGREE THAT ALL OTHER WARRANTIES, OPERATION GUIDE vii - Kyocera FS-C5025N | FS-C5015N/C5025N/5030N Operation Guide Rev-1.0 (Basic) - Page 10
BY PROPERLY AUTHORIZED REPRESENTATIVES OF EACH PARTY. BY OPENING THIS DISKETTE PACKAGE, YOU AGREE TO ACCEPT THE TERMS AND CONDITIONS OF THIS AGREEMENT. viii OPERATION GUIDE - Kyocera FS-C5025N | FS-C5015N/C5025N/5030N Operation Guide Rev-1.0 (Basic) - Page 11
in the United States) and used in accordance with the instructions, may cause harmful interference to used for the receiver. • Consult your service technician or an experienced radio/TV technician interfacing with the computer. Precautions for Use Any modifications without prior permission of Kyocera - Kyocera FS-C5025N | FS-C5015N/C5025N/5030N Operation Guide Rev-1.0 (Basic) - Page 12
bears any of the following labels. For Europe, Asia, and other countries For U.S.A. and Canada Ozone concentration The printers generate ozone gas (O3) which may concentrate in the place of installation and cause an unpleasant smell. To minimize the concentration of ozone gas to - Kyocera FS-C5025N | FS-C5015N/C5025N/5030N Operation Guide Rev-1.0 (Basic) - Page 13
instruction Kyocera Mita Corporation Tamaki Plant Manufacturer's address: 704-19, Nojino, Tamaki-cho, Watarai-gun, Mieken 519-0497, Japan Declares that the product Product name: Color Page Printer Model number: FS-C5015N/FS-C5025N/FS-C5030N (as tested with enhancement optional units; Duplex unit - Kyocera FS-C5025N | FS-C5015N/C5025N/5030N Operation Guide Rev-1.0 (Basic) - Page 14
Printer Model FS-C5015N is the 16 ppm, FS-C5025N is the 20 ppm, FS-C5030N is the 24 ppm (monochrome/color), A4 size and utilized plain paper; dry toner; etc. The printer can be equipped with several enhancement optional units as a paper feeder as PF-60, a duplex unit instruction . Kyocera Mita - Kyocera FS-C5025N | FS-C5015N/C5025N/5030N Operation Guide Rev-1.0 (Basic) - Page 15
7779. Disclaimer Kyocera Mita will of service, printer power consumption, refer to this manual. Initial settings of the sleep timer function and power saved using the sleep timer function: Initial Auto Sleep Setting Power consumption in Auto Sleep FS-C5015N 5 minutes (60 minutes) FS GUIDE xiii - Kyocera FS-C5025N | FS-C5015N/C5025N/5030N Operation Guide Rev-1.0 (Basic) - Page 16
(GEEA) The goal of GEEA is efficient use of energy. This product has a highefficiency profile and meets the criteria for receiving the GEEA-Label. FS-C5030N Initial Auto Sleep Setting 15 minutes (30 minutes) Power Consumption - Power off - Auto Sleep 0W (1W) 21W (30W) ( ): GEEA criteria xiv - Kyocera FS-C5025N | FS-C5015N/C5025N/5030N Operation Guide Rev-1.0 (Basic) - Page 17
printer cool and facilitate changing of parts and maintenance, allow access space as shown below. Leave adequate space, especially around the side cover, to allow air to be properly ventilated from the printer a site for the printer. - Avoid locations near a window or with exposure to GUIDE xv - Kyocera FS-C5025N | FS-C5015N/C5025N/5030N Operation Guide Rev-1.0 (Basic) - Page 18
Printer fire or electric shock. Always connect the printer to an outlet with a ground connection service representative. Other Precautions Connect the power plug to the closest outlet possible to the printer . Handling of Plastic Bags WARNING: Keep the plastic bags that are used with the printer - Kyocera FS-C5025N | FS-C5015N/C5025N/5030N Operation Guide Rev-1.0 (Basic) - Page 19
as there is a danger of electrical shock. • Always contact your service representative for maintenance or repair of internal parts. • Do not pull the power cord the printer, there is a danger of fire or other trouble. It is therefore recommended that you consult with your service representative - Kyocera FS-C5025N | FS-C5015N/C5025N/5030N Operation Guide Rev-1.0 (Basic) - Page 20
health. If, however, the printer is used over a long period of time in a poorly ventilated room or when printing an extremely large number of copies, the toner from your hands. • For the disposal of the old toner container, consult your service technician or dispose of the toner or toner containers - Kyocera FS-C5025N | FS-C5015N/C5025N/5030N Operation Guide Rev-1.0 (Basic) - Page 21
Operation This chapter explains how to print from your workstation. Chapter 3 - Maintenance This chapter explains how to replace the toner container and how to care for your printer. Chapter 4 - Troubleshooting This chapter explains how to handle printer problems that may occur, such as paper - Kyocera FS-C5025N | FS-C5015N/C5025N/5030N Operation Guide Rev-1.0 (Basic) - Page 22
xx OPERATION GUIDE - Kyocera FS-C5025N | FS-C5015N/C5025N/5030N Operation Guide Rev-1.0 (Basic) - Page 23
of these parts for correct use and optimal performance. This chapter contains explanations on the following topics: • Components at the Front of the Printer 1-2 • Components at the Left of the Printer 1-2 • Internal Components 1-3 • Components at the Rear of the Printer 1-4 OPERATION GUIDE 1-1 - Kyocera FS-C5025N | FS-C5015N/C5025N/5030N Operation Guide Rev-1.0 (Basic) - Page 24
Components at the Front of the Printer 1 2 3 4 1 Operation Panel 2 Top Cover 3 MP (Multi-Purpose) Tray 4 Paper Cassette Components at the Left of the Printer 1 2 3 4 5 1 Left Cover 2 Top Tray 3 Main Charger Units on the Drum Units 4 Power Switch 5 Waste Toner Box 1-2 OPERATION GUIDE - Kyocera FS-C5025N | FS-C5015N/C5025N/5030N Operation Guide Rev-1.0 (Basic) - Page 25
Internal Components 1 2 3 4 Machine Parts 5 1 Magenta Toner Container (M) 2 Cyan Toner Container (C) 3 Yellow Toner Container (Y) 4 Black Toner Container (K) 5 Paper Transfer Unit OPERATION GUIDE 1-3 - Kyocera FS-C5025N | FS-C5015N/C5025N/5030N Operation Guide Rev-1.0 (Basic) - Page 26
Components at the Rear of the Printer 1 3 4 5 2 6 7 8 1 Vents 2 Memory Card Slot 3 Power Cord Connector 4 USB Interface Connector 5 Network indicators 6 Option Interface Slot (Network/Serial) 7 Parallel Interface Connector (FS-C5030N only) 8 Network Interface Connector 1-4 OPERATION GUIDE - Kyocera FS-C5025N | FS-C5015N/C5025N/5030N Operation Guide Rev-1.0 (Basic) - Page 27
2 Printing Operation This chapter contains explanations on the following topics: • Loading Printer Driver 2-2 • Printing from Application Software 2-3 OPERATION GUIDE 2-1 - Kyocera FS-C5025N | FS-C5015N/C5025N/5030N Operation Guide Rev-1.0 (Basic) - Page 28
Printing Operation Loading Printer Driver Ensure the printer is plugged in and connected to the PC before installing the printer driver from the CD-ROM. 1 Switch on the PC and activate Windows. NOTE: If the Welcome to the Found New Hardware Wizard dialog box displays, select Cancel. 2 Insert the CD- - Kyocera FS-C5025N | FS-C5015N/C5025N/5030N Operation Guide Rev-1.0 (Basic) - Page 29
can be entered. For Microsoft Word, we recommend that you click Options and specify Use printer settings for the Default tray. 3 4 5 To start printing, click OK. NOTE: For information on how to use the printer driver software, refer to the KX Printer Driver Operation Guide. OPERATION GUIDE 2-3 - Kyocera FS-C5025N | FS-C5015N/C5025N/5030N Operation Guide Rev-1.0 (Basic) - Page 30
Printing Operation 2-4 OPERATION GUIDE - Kyocera FS-C5025N | FS-C5015N/C5025N/5030N Operation Guide Rev-1.0 (Basic) - Page 31
3 Maintenance This chapter contains explanations on the following topics: • General Information 3-2 • Toner Container Replacement 3-3 • Cleaning the Printer 3-8 • Replacing the Waste Toner Box 3-15 OPERATION GUIDE 3-1 - Kyocera FS-C5025N | FS-C5015N/C5025N/5030N Operation Guide Rev-1.0 (Basic) - Page 32
maintenance tasks you can perform on the printer. You can replace the following component according to the printer's display: • Toner Kits • Waste Toner Box Also, the following parts need periodic cleaning: • Paper Transfer Unit • Main Charger Units • Advanced Beam Array Lenses 3-2 OPERATION GUIDE - Kyocera FS-C5025N | FS-C5015N/C5025N/5030N Operation Guide Rev-1.0 (Basic) - Page 33
of 4,000 color images for each (FS-C5015N: 2,000 color images for each). Toner Kits For best results, we recommend that you only use genuine Kyocera Parts and Supplies. The toner kits are supplied in 4 different colors: cyan, magenta, yellow and black. A new toner kit for each color contains the - Kyocera FS-C5025N | FS-C5015N/C5025N/5030N Operation Guide Rev-1.0 (Basic) - Page 34
that may be under printing process in the printer will be deleted if you turn printer power off. To replace the toner container, first make sure of the color of the toner container requiring replacement. In this example, it is assumed that you are replacing the black toner container. 1 Open the top - Kyocera FS-C5025N | FS-C5015N/C5025N/5030N Operation Guide Rev-1.0 (Basic) - Page 35
remove the old toner container from the printer. 4 Put the old toner container in the plastic bag (contained in the toner kit) and discard it later according to the local code or regulations for waste disposal. Plastic Bag 5 Take the new toner container out of the toner kit. OPERATION GUIDE 3-5 - Kyocera FS-C5025N | FS-C5015N/C5025N/5030N Operation Guide Rev-1.0 (Basic) - Page 36
Maintenance 6 Shake the new toner container 5 or 6 times as shown in the figure in order to distribute the toner evenly inside the container. 7 Set the new toner container in the printer as shown in the figure below. 8 Push down on the top of the toner container to install it firmly in place. - Kyocera FS-C5025N | FS-C5015N/C5025N/5030N Operation Guide Rev-1.0 (Basic) - Page 37
Maintenance 9 Pull the blue lock lever on the toner container back towards the locked symbol as far as it will go. Lock Lever 10 Use the same procedure to replace the other color toner containers. 11 Close the top cover. Proceed to the next section. OPERATION GUIDE 3-7 - Kyocera FS-C5025N | FS-C5015N/C5025N/5030N Operation Guide Rev-1.0 (Basic) - Page 38
performing the cleaning procedure, be sure to clean the main charger unit that corresponds to color of the toner container that was replaced. The following example explains the procedure to clean the main charger unit for the black toner container. Main Charger Units MC Y K 3-8 OPERATION GUIDE - Kyocera FS-C5025N | FS-C5015N/C5025N/5030N Operation Guide Rev-1.0 (Basic) - Page 39
1 Open the left cover. Maintenance Left Cover 2 First clean the main charger wire. Grasp not restored to its home position, a band will print along the length of the page. 3 Next, clean the main charger grid. Take the grid cleaner out of the toner kit. Take the grid cleaner out of the protective - Kyocera FS-C5025N | FS-C5015N/C5025N/5030N Operation Guide Rev-1.0 (Basic) - Page 40
Maintenance NOTE: The pad of the grid cleaner contains water. Clean the grid quickly so that the pad may not dry off. 4 Lift up slightly on the main charger unit and pull it out a short distance as shown in the figure below. Main Charger Unit 5 Attach the grid cleaner to the printer with the pad - Kyocera FS-C5025N | FS-C5015N/C5025N/5030N Operation Guide Rev-1.0 (Basic) - Page 41
to its home position, the corresponding color will be printed over the whole page. 7 Remove the grid cleaner from the printer and discard it. The grid cleaner cannot be reused. Use the same procedure to clean the main charger units for the other toner containers. Proceed to the next section - Kyocera FS-C5025N | FS-C5015N/C5025N/5030N Operation Guide Rev-1.0 (Basic) - Page 42
Maintenance 1 Grasp the tab of the green lens cleaner knob. Gently pull the is not restored to its home position, the corresponding color will be printed over the whole page. Use the same procedure to clean the lenses on the main charger unit of the other toner containers. 3-12 OPERATION GUIDE - Kyocera FS-C5025N | FS-C5015N/C5025N/5030N Operation Guide Rev-1.0 (Basic) - Page 43
left cover. Cleaning the Paper Transfer Unit Print problems such as soiling of the reverse side of printed pages may occur if the paper transfer unit becomes dirty. To clean the paper transfer unit, you must use the cleaning cloth included in the toner kit. 1 While pulling the green paper transfer - Kyocera FS-C5025N | FS-C5015N/C5025N/5030N Operation Guide Rev-1.0 (Basic) - Page 44
the wiper cloth included in the toner kit. Paper Ramp Transfer Roller (Black) Registration Roller (Metal) NOTE: Be careful not to touch the black transfer roller during cleaning as this may adversely affect print quality. 3 Push the paper transfer unit back in completely. 3-14 OPERATION GUIDE - Kyocera FS-C5025N | FS-C5015N/C5025N/5030N Operation Guide Rev-1.0 (Basic) - Page 45
Maintenance Replacing the Waste Toner Box Replace the waste toner box when the Check waste toner box message is displayed. A new waste toner box is included with the toner kit. The printer will not operate without replacing the waste toner box. 1 Open the left cover. Left Cover 2 While holding the - Kyocera FS-C5025N | FS-C5015N/C5025N/5030N Operation Guide Rev-1.0 (Basic) - Page 46
Maintenance 3 Close the cap to the old waste toner box after removing the box from the printer. Cap Old Waste Toner Box 4 To prevent toner from spilling, put the old waste toner box in the plastic bag (contained in the toner kit) and discard it later according to the local code or regulations for - Kyocera FS-C5025N | FS-C5015N/C5025N/5030N Operation Guide Rev-1.0 (Basic) - Page 47
Waste Toner Box 7 Make sure that the waste toner box is correctly inserted and close the left cover. After replacing the toner containers and the waste toner box, clean the main charger units and the paper transfer unit. For instructions, see Cleaning the Printer on page 3-8. OPERATION GUIDE 3-17 - Kyocera FS-C5025N | FS-C5015N/C5025N/5030N Operation Guide Rev-1.0 (Basic) - Page 48
Maintenance 3-18 OPERATION GUIDE - Kyocera FS-C5025N | FS-C5015N/C5025N/5030N Operation Guide Rev-1.0 (Basic) - Page 49
4 Troubleshooting This chapter contains explanations on the following topics: • General Guidelines 4-2 • Print Quality Problems 4-3 • Error Messages 4-7 • Clearing Paper Jams 4-13 If a problem cannot be corrected, contact your service technician. OPERATION GUIDE 4-1 - Kyocera FS-C5025N | FS-C5015N/C5025N/5030N Operation Guide Rev-1.0 (Basic) - Page 50
General Guidelines The table below provides basic solutions for problems you may encounter with the printer. We suggest you consult this table to troubleshoot the problems before calling for service. Symptom Print quality is not good. Paper is jammed. Nothing lights on the operation - Kyocera FS-C5025N | FS-C5015N/C5025N/5030N Operation Guide Rev-1.0 (Basic) - Page 51
corrective action will not solve the problem, call for service. Printed Results Completely blank printout Corrective Action Check the toner containers. Open the printer top cover and check that the toner containers are correctly installed in the printer. For more information on installing the - Kyocera FS-C5025N | FS-C5015N/C5025N/5030N Operation Guide Rev-1.0 (Basic) - Page 52
panel. Try adjusting the color control settings using the printer driver. Check the operation panel. If the Toner low (C/M/Y/K) message is displayed with color description, install a new toner kit for the color. To replace toner, see Toner Container Replacement on page 3-3. 4-4 OPERATION GUIDE - Kyocera FS-C5025N | FS-C5015N/C5025N/5030N Operation Guide Rev-1.0 (Basic) - Page 53
as far as it will go. see Cleaning the Printer on page 3-8. Conduct color calibration either by switching the printer off then on or using the printer operation panel. Check the paper chute and the ramp. Pull out the paper transfer unit and check for toner on the paper ramp. Clean the paper ramp - Kyocera FS-C5025N | FS-C5015N/C5025N/5030N Operation Guide Rev-1.0 (Basic) - Page 54
, etc. Check the transfer roller. If the transfer roller is dirty with toner, try printing several pages. Check that the application software is correctly operated. See Tips on page 4-2. Skewed-color printout Conduct color registration using the printer operation panel. 4-6 OPERATION GUIDE - Kyocera FS-C5025N | FS-C5015N/C5025N/5030N Operation Guide Rev-1.0 (Basic) - Page 55
Troubleshooting Error Messages The following table lists errors and maintenance messages that you can be dealt with by yourself. If Call service appears, turn off the printer, disconnect the power cord, and contact your service technician. Some errors cause the alarm to sound. To stop the alarm, - Kyocera FS-C5025N | FS-C5015N/C5025N/5030N Operation Guide Rev-1.0 (Basic) - Page 56
, or hard disk is full. Press [GO] to print error report. The optional envelope feeder has been installed in this printer. The optional envelope feeder is not supported in the model FS-C5015N. Error.Power off F### File not found Press GO Format error Hard disk Turn the power switch off and then - Kyocera FS-C5025N | FS-C5015N/C5025N/5030N Operation Guide Rev-1.0 (Basic) - Page 57
Troubleshooting Message Install MK KPDL error ## Press GO Load Cassette # (A4)/(PLAIN) † Load EF (A5)/(PLAIN)† Load MP Tray (A4)/(PLAIN)† Memory card err Insert again Memory overflow Press GO Corrective Action Replace Maintenance Kit which is displayed on the message display. Replacement of the - Kyocera FS-C5025N | FS-C5015N/C5025N/5030N Operation Guide Rev-1.0 (Basic) - Page 58
the toner container using a new toner kit. Color of the toner container that needs to be replaced is represented by C (Cyan), M (Magenta), Y (Yellow), and K (Black). The top tray has become full (approx. 250 pages). You must remove all printed pages from the top tray. When the printer detects - Kyocera FS-C5025N | FS-C5015N/C5025N/5030N Operation Guide Rev-1.0 (Basic) - Page 59
Print out accumulated jobs in the virtual mailboxes. Warning low memory The printer's internal memory is running low due to too many numbers of fonts and macros downloaded. Try deleting unnecessary fonts and macros. † Messages separated by '( )/( )' are displayed alternately. †† After this error - Kyocera FS-C5025N | FS-C5015N/C5025N/5030N Operation Guide Rev-1.0 (Basic) - Page 60
Troubleshooting Memory Card Errors Code Meaning 01 The printer does not support the memory card inserted. 02 The memory card is not installed. 04 The memory card is full and cannot hold further data. Purge unnecessary files or use a new memory card. 05 Specified file is not on the memory - Kyocera FS-C5025N | FS-C5015N/C5025N/5030N Operation Guide Rev-1.0 (Basic) - Page 61
jammed paper, the printer will re-start printing. Possible Paper Jam Locations The figure below explains the printer's paper paths including paths. Face-up Tray PT-300/PT-301 Duplex Unit DU-301 Paper Feeder PF-60 Paper jam message Paper jam Printer Paper jam Cassette 2 (to 4) Paper jam - Kyocera FS-C5025N | FS-C5015N/C5025N/5030N Operation Guide Rev-1.0 (Basic) - Page 62
ream, flip the paper stack over, or rotate the paper stack 180 degrees. The printer may have problems if paper jams recur after the paper was replaced. • Whether or not the jammed pages are reproduced normally after printing is resumed depends on the location of the paper jam. Utilizing Online Help - Kyocera FS-C5025N | FS-C5015N/C5025N/5030N Operation Guide Rev-1.0 (Basic) - Page 63
Troubleshooting [Paper jam Printer] Paper is jammed at the paper cassette or inside the printer. Remove the jammed paper using the procedure given below. 1 Pull out the paper cassette and remove the jammed paper. 2 While pulling the green paper transfer unit release lever, pull out the paper - Kyocera FS-C5025N | FS-C5015N/C5025N/5030N Operation Guide Rev-1.0 (Basic) - Page 64
Troubleshooting 3 If paper is jammed as shown in A, remove the paper by pulling the center up. If paper is jammed as shown in B, remove the paper by pulling the edge. A B Registration Roller Registration Roller Paper Transfer Unit Release Lever Paper Transfer Unit 4 Open the rear cover and - Kyocera FS-C5025N | FS-C5015N/C5025N/5030N Operation Guide Rev-1.0 (Basic) - Page 65
Troubleshooting Fuser Cover Rear Cover CAUTION: The fuser unit inside the printer is hot. Do not touch it with your hands as it may result in burn injury. Remove jammed paper carefully. 5 Push the paper transfer unit the paper transfer unit (the paper jam error will be reset). OPERATION GUIDE 4-17 - Kyocera FS-C5025N | FS-C5015N/C5025N/5030N Operation Guide Rev-1.0 (Basic) - Page 66
the same procedure as for a jam at the MP Tray. Then, open and close the paper transfer unit. [Paper jam Duplexer] Paper is jammed inside the rear cover of the optional duplexer or at the duplexer drawer. Refer to the Operation Guide for the duplexer and remove the jammed paper. 4-18 OPERATION - Kyocera FS-C5025N | FS-C5015N/C5025N/5030N Operation Guide Rev-1.0 (Basic) - Page 67
without notice. Item Printing Method Printing Speeds - Cassette Description FS-C5015N FS-C5025N FS-C5030N Electrophotographic four color (CMYK) printing using Advanced Beam / m2) [100 sheets (80g/m2) when the optional duplexer is installed.] PT-301: 100 sheets (80g/m2) OPERATION GUIDE 5-1 - Kyocera FS-C5025N | FS-C5015N/C5025N/5030N Operation Guide Rev-1.0 (Basic) - Page 68
85,000 pages Microsoft Windows 95/98/Me/2000/XP Microsoft Windows NT4.0 Apple Macintosh OS 9 Apple Macintosh OS X PowerPC750CXr 400MHz PowerPC750CXr 500MHz 128MB 100,000 pages PowerPC750FX 600MHz 128MB - Maximum Interface - Standard 640MB USB: Hi-Speed USB Network: 10BASE-T/100BASE-TX KUIO - Kyocera FS-C5025N | FS-C5015N/C5025N/5030N Operation Guide Rev-1.0 (Basic) - Page 69
Item FS-C5015N Description FS-C5025N Operating noise (in During printing: LpA = 52dB (A) accordance with ISO7779 During standby: LpA = 36dB (A) [Bystander Position, During sleep mode: immeasurably low sound pressure level at the front]) Specifications FS-C5030N During printing: LpA = 55dB - Kyocera FS-C5025N | FS-C5015N/C5025N/5030N Operation Guide Rev-1.0 (Basic) - Page 70
Specifications 5-4 OPERATION GUIDE - Kyocera FS-C5025N | FS-C5015N/C5025N/5030N Operation Guide Rev-1.0 (Basic) - Page 71
A1 - Kyocera FS-C5025N | FS-C5015N/C5025N/5030N Operation Guide Rev-1.0 (Basic) - Page 72
- Kyocera FS-C5025N | FS-C5015N/C5025N/5030N Operation Guide Rev-1.0 (Basic) - Page 73
2006 is a trademark of Kyocera Corporation - Kyocera FS-C5025N | FS-C5015N/C5025N/5030N Operation Guide Rev-1.0 (Basic) - Page 74
Rev. 1.0 2006.5
Operation Guide
FS-C5015N
FS-C5025N
FS-C5030N