Kyocera KM-1650 Kyocera Extended Driver 4.0 User Guide Rev-2.1
Kyocera KM-1650 Manual
View all Kyocera KM-1650 manuals
Add to My Manuals
Save this manual to your list of manuals |
Kyocera KM-1650 manual content summary:
- Kyocera KM-1650 | Kyocera Extended Driver 4.0 User Guide Rev-2.1 - Page 1
Kyocera Extended Driver Version 4.0 User Guide - Kyocera KM-1650 | Kyocera Extended Driver 4.0 User Guide Rev-2.1 - Page 2
XP printing environment. Essentially the same operations are used for MIcrosoft Windows 95/98/Me/2000 environments. Models supported by the KX printer driver Copier/ MFP KM- 1650 KM- 1815 KM- 2050 KM- 2530 KM- 2550 KM- 3035 KM- 3530 KM- 4030 KM- 4035 KM- 4530 KM- 5035 KM- 5530 KM- 6030 KM - Kyocera KM-1650 | Kyocera Extended Driver 4.0 User Guide Rev-2.1 - Page 3
Printer Properties 2-1 Installing Optional Devices 2-1 Device Options 2-2 Punch Settings 2-3 Assigning Virtual Mailboxes 2-3 RAM Disk 2-4 User Custom Paper Sizes 3-7 Duplex Printing 3-9 Print on Both Sides 3-9 Manual Duplex 3-10 Reverse Order Printing 3-13 Collating Modes 3-14 Sorter - Kyocera KM-1650 | Kyocera Extended Driver 4.0 User Guide Rev-2.1 - Page 4
Chapter 4 Layout Booklet 4-1 Left Edge and Right Edge Binding 4-2 Booklet Printing 4-2 Multiple Pages Per Sheet 4-3 Poster 4-4 Sheets Per Page 4-5 Available Poster Sizes 4-5 Scaling And Gutters 4-7 Scaling 4-7 Gutter 4-7 Chapter 5 Finishing Staple 5-1 Using the Stapler 5-2 Punch 5-2 - Kyocera KM-1650 | Kyocera Extended Driver 4.0 User Guide Rev-2.1 - Page 5
Page Insert 7-5 Insert Page Printing 7-5 Combinations 7-7 Transparency Interleaving 7-8 Chapter 8 Job Job Storage (e-MPS 8-1 Temporary and Permanent Jobs 8-2 Virtual Mailbox 8-8 Quick Copy 8-16 Proof and Hold 8-17 Private Print 8-18 Job Storage 8-20 Synergy Print Box 8-21 Form Gallery - Kyocera KM-1650 | Kyocera Extended Driver 4.0 User Guide Rev-2.1 - Page 6
settings can be configured. Note: In Windows XP or 2000, you must be logged into the system with administrator privileges to install the printer driver. When installing the printer driver, you must specify the connection method and port. Once the printer driver is installed, you can add more - Kyocera KM-1650 | Kyocera Extended Driver 4.0 User Guide Rev-2.1 - Page 7
, select Yes to install an e-mail printer port for network printing and click Next. 4 The Select the Printer Port dialog box appears. If the port you want to use appears in the Use the following port: list, select the port, click Next, and then proceed to step 6 on page 1-7. 4 User Guide 1-2 - Kyocera KM-1650 | Kyocera Extended Driver 4.0 User Guide Rev-2.1 - Page 8
step 6 on page 1-7. 5 If the port is not in the list, select Create a new port, select the port type from the menu, and click Next. 6 Instructions for creating a new USB port are below. To create a network port, see Create a New Network Port on page 1-5. 7 USB Port 1 If there are no USB - Kyocera KM-1650 | Kyocera Extended Driver 4.0 User Guide Rev-2.1 - Page 9
The KM USB Printer dialog box appears. Select one of the following search methods: 6 • Type the printer name...: Leave the printer name blank and click Next. All printing systems available on network servers appear. • If you have directly typed in the print server name, click Next. User Guide - Kyocera KM-1650 | Kyocera Extended Driver 4.0 User Guide Rev-2.1 - Page 10
systems that operate with the Internet print protocol. 3 Find and select the printing system URL and click Next. 7 Create a New Network Port 1 The Select the Printer Port dialog box appears. Select KPrint Port: from the Create a new port: Type list, and then click Next - Kyocera KM-1650 | Kyocera Extended Driver 4.0 User Guide Rev-2.1 - Page 11
2 The KPrint Add Port Wizard dialog box appears. Select Print using LPR (Line Printer Remote) and click Next. 2 Note: If the KPrint utility is installed, the printing system, then click OK. Click Next to continue. 4 Confirm the destination printer port name and click Next. 4 User Guide 1-6 - Kyocera KM-1650 | Kyocera Extended Driver 4.0 User Guide Rev-2.1 - Page 12
printer and click Next. 7 8 The Print Test Page dialog box appears. 8 • Select Yes (recommended) to print a test page to confirm the proper operation of your printing system and click Next. If the test page does not print properly, click Troubleshoot to determine the problem. 1-7 KX Driver - Kyocera KM-1650 | Kyocera Extended Driver 4.0 User Guide Rev-2.1 - Page 13
and click Install. The printer driver installation begins. 9 10 Once the installation is complete, the Printer Installed Successfully dialog box and click Next to install additional printer drivers. The New Printer Installation dialog box appears. • Select No to complete the - Kyocera KM-1650 | Kyocera Extended Driver 4.0 User Guide Rev-2.1 - Page 14
printer driver installation is complete, the Printer Installed Successfully dialog box install, and click Next. Follow the instructions in the dialog box to proceed. Install. 3 14 The Printer Components Installation Completed dialog box Yes to install additional printer drivers, and then click Next - Kyocera KM-1650 | Kyocera Extended Driver 4.0 User Guide Rev-2.1 - Page 15
Properties This section explains how to customize the installed printer driver settings including: • Accessing Printer Properties • Installing Optional Devices • User Settings • Page Description Language (PDL) • Administrator Settings • Compatibility Settings • Auto Configuration Follow the steps - Kyocera KM-1650 | Kyocera Extended Driver 4.0 User Guide Rev-2.1 - Page 16
the user, administrator settings for operation panel messages, passwords, and more. Note: The printer image shown in the Printer Properties capacity of your printing system. This setting is required to optimize the downloading of printing system fonts. If you don't know the memory capacity KX Driver - Kyocera KM-1650 | Kyocera Extended Driver 4.0 User Guide Rev-2.1 - Page 17
Printer Properties select this option from operation panel. See Auto Configuration on page 2-11 be created. For further details, see Virtual Mailbox on page 8-8. Note: An installed hard disk supports the following options: Quick Copy, Proof and Hold, Private Print, Job Storage, Virtual Mailbox, - Kyocera KM-1650 | Kyocera Extended Driver 4.0 User Guide Rev-2.1 - Page 18
Printer Properties RAM Disk The RAM disk functions as a hard disk saving system's Operation Guide. User Settings The following user information can be configured by clicking User in the Device Settings tab. • Identification • Unit of Measurement • Language Preference Selection 2-4 KX Driver - Kyocera KM-1650 | Kyocera Extended Driver 4.0 User Guide Rev-2.1 - Page 19
Printer Properties Identification In this dialog box, enter user name and department information to be displayed at the operation panel during printing. For some printing system models, the User name new language, click OK in the User Settings and then in the Properties dialog box. User Guide 2-5 - Kyocera KM-1650 | Kyocera Extended Driver 4.0 User Guide Rev-2.1 - Page 20
Printer Properties Page Description Language (PDL) You have the option to change the Page Description Language (PDL) by clicking PDL in the Device Settings tab. Available PDLs vary based on the printing system. You can choose from PCL XL, PCL 5e, PCL 5c, or KPDL (Kyocera recent version of HP PCL and - Kyocera KM-1650 | Kyocera Extended Driver 4.0 User Guide Rev-2.1 - Page 21
communication support • Wide selection of fonts for use with Microsoft Windows applications support PostScript 2 or 3. • An optional KPDL upgrade kit may be required for some models. • Kyocera's some models, when PCL XL is selected. 3 User Guide PCL XL Option Disable auto media type switching - Kyocera KM-1650 | Kyocera Extended Driver 4.0 User Guide Rev-2.1 - Page 22
Message You can specify settings to display the job name, user name, or department for the current job on the printing system's operation panel. The available settings may vary depending on the features of your printing system. 1 In the Device Settings tab, click Administrator. 1 2-8 KX Driver - Kyocera KM-1650 | Kyocera Extended Driver 4.0 User Guide Rev-2.1 - Page 23
printer driver or it can be selected in the Job dialog box before printing. Displays the user name during printing. The user name is the information entered according to the instructions in Identification on page 2-5. Displays the user check box to open the Password dialog box. 1 User Guide 2-9 - Kyocera KM-1650 | Kyocera Extended Driver 4.0 User Guide Rev-2.1 - Page 24
values will maintain support without the need to change the macros. Use the Driver Info utility, available on the Kyocera Software Library CD, to compare the source values for all installed drivers. If the values for a given media source differ between the old and new printer drivers, reassign the - Kyocera KM-1650 | Kyocera Extended Driver 4.0 User Guide Rev-2.1 - Page 25
in the Device Settings properties page. Auto Configure keeps the printer driver's Device Settings consistent with the actual printing system devices. Auto Configure currently supports these ports for Microsoft Windows operating systems: • Windows 98 & ME - KPrint ports (Raw mode, LPR, and IPP) only - Kyocera KM-1650 | Kyocera Extended Driver 4.0 User Guide Rev-2.1 - Page 26
Printer Properties TCP/IP port can be either an IP address or the printing system name (Host name). Note: Auto Configuration is not supported for Microsoft Windows 95. Click Auto the time out. • The Windows XP firewall prevents the communication. It generates the following message: 2-12 KX Driver - Kyocera KM-1650 | Kyocera Extended Driver 4.0 User Guide Rev-2.1 - Page 27
Printer Properties The Microsoft Windows XP Firewall settings can be changed to allow communication between the printing system and your computer. The default setting for Windows XP Service Pack 2 is for the Windows Firewall to be set to On. When the Windows Security alert shown above appears, - Kyocera KM-1650 | Kyocera Extended Driver 4.0 User Guide Rev-2.1 - Page 28
describes the following printing tasks when printing from Microsoft Windows applications. • Basic Printing Tasks • Printing on the application's File menu, select Print. The Print dialog box appears. 2 User Guide 3 Select the desired printing system from the list of available printing systems. 3 - Kyocera KM-1650 | Kyocera Extended Driver 4.0 User Guide Rev-2.1 - Page 29
Printing Basics When using Microsoft Word, we recommend that you click Options and for default tray select Use printer settings. 5 Click OK. 5 6 Click Properties to open the Properties dialog box. 6 User Guide 3-2 - Kyocera KM-1650 | Kyocera Extended Driver 4.0 User Guide Rev-2.1 - Page 30
original document. The document image is adjusted to match the size you select. 1 In the Properties dialog box, from the Basic tab click Page Sizes. 1 3-3 KX Driver - Kyocera KM-1650 | Kyocera Extended Driver 4.0 User Guide Rev-2.1 - Page 31
output paper size.3 User Guide 4 Confirm that the proper paper size is loaded. Click OK to return to the Print dialog box. 4 5 Click OK to start printing. 5 The source document is automatically scaled to fit the output paper size. If you would like to manually - Kyocera KM-1650 | Kyocera Extended Driver 4.0 User Guide Rev-2.1 - Page 32
tab by default when you are printing on regular paper. However, the printing system supports a wide variety of printing media depending on your printing system model. You can is properly loaded by following the instructions outlined in the supplied printing system's Operation Guide. 3-5 KX Driver - Kyocera KM-1650 | Kyocera Extended Driver 4.0 User Guide Rev-2.1 - Page 33
Media type list is not available. To change this setting, open Printer Properties from the Microsoft Windows Printer and Faxes window, go to Device settings and then Compatibility Settings, and then uncheck g/m2 Transparency Usable Paper Cassettes All Multi-purpose tray (MP tray) User Guide 3-6 - Kyocera KM-1650 | Kyocera Extended Driver 4.0 User Guide Rev-2.1 - Page 34
Guide. 1 2 Click Start in the Windows taskbar and then select Printers and Faxes. The Printers and Faxes window appears. 2 Note: Windows 98/Me/2000: Open the printer driver properties by clicking Start in the Windows taskbar and then selecting the Printers window. 3 Right-click the printer - Kyocera KM-1650 | Kyocera Extended Driver 4.0 User Guide Rev-2.1 - Page 35
mm) 8 Click OK. 9 Repeat the steps above if you want to add other custom paper sizes. A maximum of 20 different paper sizes can be added. User Guide 3-8 - Kyocera KM-1650 | Kyocera Extended Driver 4.0 User Guide Rev-2.1 - Page 36
depending on the printing system model. For further details, refer to your printing system's Operation Guide. For information on Booklet printing, see Booklet Printing on page 4-2. In the table below, the File menu from the applications's Print dialog box, open Properties. 1 3-9 KX Driver - Kyocera KM-1650 | Kyocera Extended Driver 4.0 User Guide Rev-2.1 - Page 37
models that do not have a duplex unit. Manual Duplex is not available when any of the options in the Advanced tab are used. The steps for using Manual Duplex may vary, depending on your printing system, what accessories are installed, and what application you are printing from. User Guide 3-10 - Kyocera KM-1650 | Kyocera Extended Driver 4.0 User Guide Rev-2.1 - Page 38
) appears telling the user to flip the printed pages over and re-insert them in the input bin of the printing system. 3-11 Some Kyocera printing systems have a manual duplex setting in Printing Properties, in the Basic tab. Instructions for using this method for manual duplex printing are below - Kyocera KM-1650 | Kyocera Extended Driver 4.0 User Guide Rev-2.1 - Page 39
the Source list. 1 2 Select the Print on both sides (manual duplex) check box. 2 User Guide 3 Select Flip on Long Edge or Flip on Short Edge. 3 4 Select Print manual duplex instructions to print an instruction sheet. Follow the printed instructions for placing the pages back into the cassette - Kyocera KM-1650 | Kyocera Extended Driver 4.0 User Guide Rev-2.1 - Page 40
on the short edge and put the pages into the cassette. 7 Click OK in the Manual Duplex Instruction dialog box. 7 The odd-numbered pages will be printed. Reverse Order Printing Prints document pages . 1 2 From the Basic tab, select the output tray from the Destination list. 2 3-13 KX Driver - Kyocera KM-1650 | Kyocera Extended Driver 4.0 User Guide Rev-2.1 - Page 41
of output trays and their receiving capacity (the number of sheets) varies depending on the sorter model. Refer to your sorter's Operation Guide. Frequently, the application settings are given priority, causing a change in the sorter output method depending on the application. Verify these settings - Kyocera KM-1650 | Kyocera Extended Driver 4.0 User Guide Rev-2.1 - Page 42
4 Tray 5 Mailbox • The mailbox mode sends copies to specified user trays, which is useful when the printing system is shared among different users. For example, specifying tray 5 sends the printed document to tray different from Virtual Mailbox (see Virtual Mailbox on page 8-8.) 3-15 KX Driver - Kyocera KM-1650 | Kyocera Extended Driver 4.0 User Guide Rev-2.1 - Page 43
to the application's Print dialog box and begin printing. The specified number of copies of each page of the document are delivered to each tray.4 User Guide 3-16 - Kyocera KM-1650 | Kyocera Extended Driver 4.0 User Guide Rev-2.1 - Page 44
You can use optional document finishers to fold and staple the booklet. For further details on Staple settings, refer to Staple on page 5-1. The supported paper sizes for Booklet printing are A3, B4, A4, A5, B5 (JIS), ledger, letter, legal, statement, and folio. Booklet printing can be used with - Kyocera KM-1650 | Kyocera Extended Driver 4.0 User Guide Rev-2.1 - Page 45
Outside Outside Inside Inside Booklet Printing 1 Select Print from the File menu. From the applications's Print dialog box, open Print Properties. 1 2 Click the Layout tab. 2 User Guide 4-2 - Kyocera KM-1650 | Kyocera Extended Driver 4.0 User Guide Rev-2.1 - Page 46
dialog box, open Properties. (Select Print from the File menu, and select Properties.) 10 2 Click the Layout tab. 11 3 Select Multiple pages per sheet. 12 4-3 KX Driver - Kyocera KM-1650 | Kyocera Extended Driver 4.0 User Guide Rev-2.1 - Page 47
). For further details on changing the page description language, refer to PDL Settings on page 2-6. You can print a document in a larger size than the paper supported for the printing system. The Poster feature allows you to increase the print size, print portions of the - Kyocera KM-1650 | Kyocera Extended Driver 4.0 User Guide Rev-2.1 - Page 48
are based on the selected Page size in the Basic tab. For further details on selecting a page size, refer to Basic Printing Tasks on page 3-1. 4-5 KX Driver - Kyocera KM-1650 | Kyocera Extended Driver 4.0 User Guide Rev-2.1 - Page 49
Device Settings tab. For further details on changing the unit, refer to User Settings on page 2-4. Print Format If you are new to poster printing, you may want to print a proof sheet, in addition to the poster, to guide you in assembling the printed poster sheets. The proof sheet displays all poster - Kyocera KM-1650 | Kyocera Extended Driver 4.0 User Guide Rev-2.1 - Page 50
into the Left box. The Left option may not be available, depending on your Orientation and Print on both sides settings in the Basic tab. 4-7 KX Driver - Kyocera KM-1650 | Kyocera Extended Driver 4.0 User Guide Rev-2.1 - Page 51
paper when the gutter is increased, clear the check box. When you want to change the page size (for example, to enlarge an A4-size brochure for printing on A3 paper), refer to Print Sizes on page 3-3. User Guide 4-8 - Kyocera KM-1650 | Kyocera Extended Driver 4.0 User Guide Rev-2.1 - Page 52
of finishing equipment. The Finishing tab is available for models that support optional finishing devices such as Multi finisher or Booklet stitcher. refer to Booklet on page 4-1. User Guide After installation, optional equipment must be selected in the printer driver in the Device Settings tab. - Kyocera KM-1650 | Kyocera Extended Driver 4.0 User Guide Rev-2.1 - Page 53
Punch User Guide Finishing Using the positions: Upper left, Upper right, or Booklet. (Some models support multiple booklet positions.) 4 Note: You can increase the left or For further details about stapler specifications, refer to your finishing device's Operation Guide. The Punch feature is - Kyocera KM-1650 | Kyocera Extended Driver 4.0 User Guide Rev-2.1 - Page 54
finishing device and delivered to the output tray. For further details about hole punch specifications, refer to your finishing device's Operation Guide. Positioning the Hole Punch Note: Some models do not support the punch position option. 1 With Punch selected in the Finishing tab, click the - Kyocera KM-1650 | Kyocera Extended Driver 4.0 User Guide Rev-2.1 - Page 55
to Printer Properties on page 2-1. 1 From the application's Print dialog box, open Properties. (Select Print from the File menu, and select Properties.) 1 2 In the Basic tab, under Destination, select a face down finishing tray, such as Finisher (face down) or Tray A (face down). 2 User Guide - Kyocera KM-1650 | Kyocera Extended Driver 4.0 User Guide Rev-2.1 - Page 56
File menu, and select Properties.) 1 2 In the Basic tab, under Destination, select an option that is not a finishing tray, for example: Printer default or Inner tray. 2 3 Select a number of copies greater than 1. 3 4 Click the Finishing tab, then select Separation. The Rotate copies option - Kyocera KM-1650 | Kyocera Extended Driver 4.0 User Guide Rev-2.1 - Page 57
Finishing Your print job will be stacked in the output tray with each copy alternating horizontally and vertically. User Guide 5-6 - Kyocera KM-1650 | Kyocera Extended Driver 4.0 User Guide Rev-2.1 - Page 58
Finishing 5-7 KX Driver - Kyocera KM-1650 | Kyocera Extended Driver 4.0 User Guide Rev-2.1 - Page 59
printers only)) Draft Custom Description Prints using the highest printing system resolution. Prints using the second highest printing system resolution. Prints at a resolution of 600 dpi. Choose your own combination of settings for Resolution, Kyocera Image Refinement, and EcoPrint. User Guide - Kyocera KM-1650 | Kyocera Extended Driver 4.0 User Guide Rev-2.1 - Page 60
Resolution (monochrome printers only) Kyocera Image Refinement (KIR) EcoPrint Description The number of dots printed in one inch. At higher resolutions more detail appears in the print job. Select Fast 1200 mode, 600 dpi, or 300 dpi. Printer models FS-1800, FS-1800+, and FS-3800 support Fine 1200 - Kyocera KM-1650 | Kyocera Extended Driver 4.0 User Guide Rev-2.1 - Page 61
Windows 3.1, Windows 98 and Millennium Edition), non-TrueType fonts can only be downloaded as bitmaps. System fonts and device fonts are automatically matched based on typeface name. To match a specific a large document. This selection replaces the old font with the desired font. User Guide 6-3 - Kyocera KM-1650 | Kyocera Extended Driver 4.0 User Guide Rev-2.1 - Page 62
Imaging Note: GDI compatible mode does not support Substitute with device fonts. Font Substitution With selections. Note: Some options are available only when a specific PDL is selected. To view or change PDL settings, in the Windows Printers and Faxes folder, right-click the icon 6-4 KX Driver - Kyocera KM-1650 | Kyocera Extended Driver 4.0 User Guide Rev-2.1 - Page 63
Prints images like a photo negative, reversing black and white areas of the image. Prints the page content backwards, as it would appear in a mirror image. User Guide 6-5 - Kyocera KM-1650 | Kyocera Extended Driver 4.0 User Guide Rev-2.1 - Page 64
edited. Halftone Screen (Monochrome Printing Systems Only) An experienced user can adjust Halftone Screen settings to create shades of gray in Settings dialog box, click Halftone Screen. 1 2 Clear the Use printer's default screens check box. 2 3 Select from the list for each /cm. 6-6 KX Driver - Kyocera KM-1650 | Kyocera Extended Driver 4.0 User Guide Rev-2.1 - Page 65
Grayscale User Guide Imaging Halftone Screen Option Angle Shape Increase accuracy of faster printing. It is also useful for increasing the detail for light colored text printed by monochrome printers. White text and image colors are unaffected. Prints all colors as black. This feature works - Kyocera KM-1650 | Kyocera Extended Driver 4.0 User Guide Rev-2.1 - Page 66
(colors as used for output printing). RGB is an acronym for Red, Green, and Blue. CMYK is an acronym for Cyan, Magenta, Yellow and Black. 6-8 KX Driver - Kyocera KM-1650 | Kyocera Extended Driver 4.0 User Guide Rev-2.1 - Page 67
tone and mid-tone adjustment Fruit Hue adjustment 5 Select HSL (hue, saturation, lightness) or RGB (red, green, blue) as the color space to work with. 5 User Guide 6-9 - Kyocera KM-1650 | Kyocera Extended Driver 4.0 User Guide Rev-2.1 - Page 68
left to increase or decrease the value between -180 and +180. For specific hue adjustment, select Red, Yellow, Green, Cyan, Blue, or Magenta from in the box. The horizontal bracket above the upper color bar shows the part of the color bar affected by the adjustment. The lower color bar KX Driver - Kyocera KM-1650 | Kyocera Extended Driver 4.0 User Guide Rev-2.1 - Page 69
Windows 2000 and XP, additional ICM rendering intent options are available under ICM Settings. Note: ICM technology is not supported in Windows 95 or Windows Prints black text and graphs in black toner only. Prints black text and graphs in four-color toner (CMYK). Prints images and graphs similar - Kyocera KM-1650 | Kyocera Extended Driver 4.0 User Guide Rev-2.1 - Page 70
text, and graphs in vivid color (black prints with black toner only). Prints images, text, and graphs in vivid color (black prints with four-color toner (CMYK)). ICM Color Correction 1 In the Color Correction saturation by adjusting hue to preserve the vividness of pure colors. 6-12 KX Driver - Kyocera KM-1650 | Kyocera Extended Driver 4.0 User Guide Rev-2.1 - Page 71
This section describes the Cover mode, Page insert, and Transparency interleaving features of the printer driver. When these options are used with the MP tray, cassette mode (the default setting Properties.) 1 2 In the Properties dialog box, click the Publishing tab. 2 User Guide 7-1 - Kyocera KM-1650 | Kyocera Extended Driver 4.0 User Guide Rev-2.1 - Page 72
Selection Front Cover Insertion Type Inserts a blank front cover. Front 5Front Outside Front cover Prints on the outside surface of the front cover. Front cover 7-2 KX Driver - Kyocera KM-1650 | Kyocera Extended Driver 4.0 User Guide Rev-2.1 - Page 73
and Back 5Front Inside Duplex Printing (page 3-9) Prints on the inside surface of the front cover and inserts a blank back cover. Back cover Front cover User Guide 7-3 - Kyocera KM-1650 | Kyocera Extended Driver 4.0 User Guide Rev-2.1 - Page 74
5Front Outside 5Front Inside 5Back Inside 5Back Outside Duplex Printing (page 3-9) Prints on both sides of the front and back covers. Back cover Front cover 7-4 KX Driver - Kyocera KM-1650 | Kyocera Extended Driver 4.0 User Guide Rev-2.1 - Page 75
Heavy, thin, or other special papers must be supplied from the MP tray. Media type selections are not supported for KM-1510. 2 Load the paper for the front and back cover in the paper cassette selected in step 1. ). 1 2 In the Properties dialog box, click the Publishing tab. 2 User Guide 7-5 - Kyocera KM-1650 | Kyocera Extended Driver 4.0 User Guide Rev-2.1 - Page 76
Inserts a blank page before the second page. 5Page insert 5Print onto Front Inserted page Prints on the front surface of the inserted page. Inserted page 7-6 KX Driver - Kyocera KM-1650 | Kyocera Extended Driver 4.0 User Guide Rev-2.1 - Page 77
a series of insertions in a range of pages, use a hyphen (-). For example, to insert a page before pages 5, 11, 12, 13, and 18, enter [5,11-13,18]. 2 User Guide 7-7 - Kyocera KM-1650 | Kyocera Extended Driver 4.0 User Guide Rev-2.1 - Page 78
Compatibility Settings dialog box, select Auto (Transparency). 2 If the Source and Media type lists have not been combined, from the Media type list, select Transparency. 3 7-8 KX Driver - Kyocera KM-1650 | Kyocera Extended Driver 4.0 User Guide Rev-2.1 - Page 79
will prompt you to load transparencies into the MP tray, and, if necessary, load backing paper into the selected cassette. 7 7 Click OK to begin printing. 8 User Guide 7-9 - Kyocera KM-1650 | Kyocera Extended Driver 4.0 User Guide Rev-2.1 - Page 80
Job Storage (e-MPS) The Job tab offers a variety of features, as listed below. Printer Driver Menu Options Temporary and Permanent Jobs Virtual Mailbox Quick Copy Function Job Deletion Access after Printing Code Menu> e-MPS> Same as for Quick Copy original job (adjustable) User Guide 8-1 - Kyocera KM-1650 | Kyocera Extended Driver 4.0 User Guide Rev-2.1 - Page 81
Deleted after printing Saved until manually deleted Saved until manually deleted Saved until manually deleted No Yes Optional No original job Sometimes the application settings are given priority over the printer driver settings, causing a change in the output method. If you User Guide 8-2 - Kyocera KM-1650 | Kyocera Extended Driver 4.0 User Guide Rev-2.1 - Page 82
, the dedicated KM-NET for Clients Job Manager utility is required. Use KM-NET for Clients to Print Saved Jobs Again To print out jobs, the KM-NET for Clients utility must first be installed on your computer. The utility is located on the supplied Kyocera Software Library CD-ROM. 8-3 KX Driver - Kyocera KM-1650 | Kyocera Extended Driver 4.0 User Guide Rev-2.1 - Page 83
a local connection with your computer, the KX printer driver must be installed on it. A local connection cannot be used in Windows 2000. From the CD-ROM Main Menu dialog box, select Printer Utilities, then KM-NET for Clients to install the software. After installation, follow these steps to launch - Kyocera KM-1650 | Kyocera Extended Driver 4.0 User Guide Rev-2.1 - Page 84
KM-NET for Clients. 4 5 Select the printer KM-NET for Clients Operation Guide. Print Additional Copies of Saved Jobs You can reprint saved print jobs using the optional barcode reader. Use the printing system's serial interface to connect the barcode reader to the printing system. 8-5 KX Driver - Kyocera KM-1650 | Kyocera Extended Driver 4.0 User Guide Rev-2.1 - Page 85
. 3 4 Click Options to open the Barcode Options dialog box. 4 5 Select the Barcode check box. Select Print on first page only or Print on all sheets. 5 User Guide 8-6 - Kyocera KM-1650 | Kyocera Extended Driver 4.0 User Guide Rev-2.1 - Page 86
the table below. Orientations Horizontal Upper-Right Position Lower-Right Upper-Left Lower-Left Vertical When printing, the barcode is printed in the designated position. 8-7 KX Driver - Kyocera KM-1650 | Kyocera Extended Driver 4.0 User Guide Rev-2.1 - Page 87
to work with the barcode reader. For further details, refer to the barcode reader's Operation Guide. Virtual Mailbox With the Virtual mail box feature, mailboxes created on the hard disk are assigned to multiple users. Jobs posted to a virtual mail box can be printed later from the printing system - Kyocera KM-1650 | Kyocera Extended Driver 4.0 User Guide Rev-2.1 - Page 88
to the printing system's Operation Guide. Create Virtual Mailboxes 1 Click Start in the Windows taskbar, and click Printers and Faxes to open the Printers and Faxes window. 1 2 Right-click the icon for your printing system in the Printers and Faxes window. A list appears. 2 8-9 KX Driver - Kyocera KM-1650 | Kyocera Extended Driver 4.0 User Guide Rev-2.1 - Page 89
Settings tab. 3 4 Select the Hard Disk check box. The Hard Disk Settings dialog box appears. 4 User Guide 5 Click New and enter any name into Mailbox name. 5 For example, name the mailbox after the user or department. The name can be up to 31 characters in length. 6 The mailbox names appear - Kyocera KM-1650 | Kyocera Extended Driver 4.0 User Guide Rev-2.1 - Page 90
Windows taskbar, and click Printers and Faxes to open the Printers and Faxes window. 1 2 Right-click the icon for your printer in the Printers and Faxes window. A list appears.2 3 Click Properties in the list. The Properties dialog box appears. Click the Device Settings tab. 3 8-11 KX Driver - Kyocera KM-1650 | Kyocera Extended Driver 4.0 User Guide Rev-2.1 - Page 91
, and click Printers and Faxes to open the Printers and Faxes window. 1 2 Right-click the icon for your printing system in the Printers and Faxes window. A list appears. 2 3 Click Properties in the list. The Properties dialog box appears. Click the Device Settings tab. 3 User Guide 8-12 - Kyocera KM-1650 | Kyocera Extended Driver 4.0 User Guide Rev-2.1 - Page 92
list. 8 Save Jobs in Virtual Mailboxes 1 From the application's Print dialog box, open the Properties. Select Print from the File menu and select Properties. 1 8-13 KX Driver - Kyocera KM-1650 | Kyocera Extended Driver 4.0 User Guide Rev-2.1 - Page 93
to Create Virtual Mailboxes on page 8-9. 5 The Virtual Mailbox Selection dialog box appears. Select the mailbox for saving the job, and click OK. 5 User Guide 6 Close the Properties dialog box. The job is saved to the virtual mailbox on the hard disk and held for printing. 6 • Printing the - Kyocera KM-1650 | Kyocera Extended Driver 4.0 User Guide Rev-2.1 - Page 94
6 The job list information shows the number of saved jobs, number of pages, size, and other specific details for each virtual mailbox. The symbol to the left of a virtual mailbox indicates jobs in the S or T key repeatedly until the display looks like the example shown below. 4 KX Driver - Kyocera KM-1650 | Kyocera Extended Driver 4.0 User Guide Rev-2.1 - Page 95
After using the quick copy feature, a document can be reprinted from the operation panel. 1 In the Properties dialog box, click the Job tab. 1 User Guide 2 Select the Job storage (e-MPS) check box. For Quick copy printing, select Quick copy. 2 3 You can name the job for later reference when - Kyocera KM-1650 | Kyocera Extended Driver 4.0 User Guide Rev-2.1 - Page 96
user name. 5 6 If the user name is correct, press the ENTER key. Otherwise, press the S or T key until the correct name appears. 6 7 Press the ENTER key. Follow the instructions dialog box as indicated in the instructions for Quick Copy on page 8-16. Select Proof and hold. 1 8-17 KX Driver - Kyocera KM-1650 | Kyocera Extended Driver 4.0 User Guide Rev-2.1 - Page 97
User Guide Job 2 Name the job for future reference when printing from the print operation jobs will remain saved on the hard disk until the printing system is turned off. To delete jobs manually, use the same key operations as explained in Deleting Quick Copy Jobs on page 8-17. Private Print - Kyocera KM-1650 | Kyocera Extended Driver 4.0 User Guide Rev-2.1 - Page 98
is displayed with a blinking question mark [ ? ]. Press the ENTER key.7 8 The user name displayed is specified following the instructions in Identification on page 2-5. If this is the correct job for printing, press the ENTER key as in Deleting Quick Copy Jobs on page 8-17. 15 8-19 KX Driver - Kyocera KM-1650 | Kyocera Extended Driver 4.0 User Guide Rev-2.1 - Page 99
for Print Private Print Jobs on page 8-18. The stored jobs will remain saved even after the printing system is switched off. To delete them manually, follow the same steps as for Deleting Quick Copy Jobs on page 8-17. When deleting jobs, you must enter the same access code as saved - Kyocera KM-1650 | Kyocera Extended Driver 4.0 User Guide Rev-2.1 - Page 100
various applications can be combined. This feature is available on KM-4530, KM-5530, KM-6230, KM-6330, and KM-7530. See your printing system's Operation Guide for more information on this feature. To use Synergy print job is now stored in the printing system's memory, in a print box. 8-21 KX Driver - Kyocera KM-1650 | Kyocera Extended Driver 4.0 User Guide Rev-2.1 - Page 101
Document Management key. 1 2 The Document Management menu appears. Under Synergy Print Box, select Document reg. 2 3 Select a print box from the list. 3 User Guide 4 (Optional) To give a custom name to the document, touch Change name, and then enter the name on the typepad that appears. Click - Kyocera KM-1650 | Kyocera Extended Driver 4.0 User Guide Rev-2.1 - Page 102
order. To sort, select Order of indication, and then choose one of the sorting options. • To manually select the print order, touch/select the documents in the order in which you want them to print. the list of documents that appears, select the document you want to print. 4 8-23 KX Driver - Kyocera KM-1650 | Kyocera Extended Driver 4.0 User Guide Rev-2.1 - Page 103
button. Delete Use this option to delete individual documents in a print box. Form Gallery Form Gallery allows the user to store up to 100 frequently used forms or images in the printing system's memory for easy access and . You can also print out a list of stored images, check and User Guide 8-24 - Kyocera KM-1650 | Kyocera Extended Driver 4.0 User Guide Rev-2.1 - Page 104
Phillip J. Longshanks This feature is available on KM-4530, KM-5530, KM-6230, KM-6330, and KM-7530. See your printing system's Operation Guide for more information on this feature. To panel, press the Copier key. 1 2 Select User choice and then Forms Overlay. 2 3 Select On. 3 KX Driver - Kyocera KM-1650 | Kyocera Extended Driver 4.0 User Guide Rev-2.1 - Page 105
operation panel while the job is printing. This can help manage documents when multiple users are using the device at the same time. Select Application defined to allow the doubling print speed and providing backup printing support. Requires installation of the Tandem unit. User Guide 8-26 - Kyocera KM-1650 | Kyocera Extended Driver 4.0 User Guide Rev-2.1 - Page 106
KX printer drivers on your computer and to other computers. A maximum 25 profiles can be saved in one driver, including the default profile. A set of common profiles can be installed as optional components from the Kyocera Printer and Description.3 4 Click OK to save the profile. 4 User Guide 9-1 - Kyocera KM-1650 | Kyocera Extended Driver 4.0 User Guide Rev-2.1 - Page 107
and save the profile. 3 Import 1 Click Import in the Profile dialog box. 1 2 Select a profile and click Open. 2 3 The profile appears in the Select profile list. 3 User Guide 9-2 - Kyocera KM-1650 | Kyocera Extended Driver 4.0 User Guide Rev-2.1 - Page 108
a print job. Prologue/Epilogue Prologue/Epilogue lets an experienced PRESCRIBE user insert one or more printing system language command files into specific locations of a print job. For example, a command file may enables the insertion point options for that file in the dialog box. User Guide 10-1 - Kyocera KM-1650 | Kyocera Extended Driver 4.0 User Guide Rev-2.1 - Page 109
User Guide Advanced Add Click Add to browse your computer or network for command files. The files are plain text format and typically have a file name extension - Kyocera KM-1650 | Kyocera Extended Driver 4.0 User Guide Rev-2.1 - Page 110
even pages The command file is inserted into all even-numbered pages. Pages To insert the command file into specific pages, type individual page numbers separated by commas in the text box, or a page range separated by creating your own watermarks, see Add Watermark on page 10-4. 10-3 KX Driver - Kyocera KM-1650 | Kyocera Extended Driver 4.0 User Guide Rev-2.1 - Page 111
User Guide Advanced Page selection Page selection options are enabled after a all pages of the document except the first page. Only on specified pages To print the watermark only on specific pages, type individual page numbers separated by commas in the text box, or a page range separated by - Kyocera KM-1650 | Kyocera Extended Driver 4.0 User Guide Rev-2.1 - Page 112
in tenths of an inch or millimeters. The unit (inches or millimeters) is selected in the User Settings dialog box, accessed from the Device Settings tab. Use the preview area and the Position y value moves the watermark text down. • A negative y value moves the watermark text up. 10-5 KX Driver - Kyocera KM-1650 | Kyocera Extended Driver 4.0 User Guide Rev-2.1 - Page 113
OK; or click Define Custom Colors to open the color spectrum panel. 3 User Guide 4 In the color spectrum, click and drag the pointer to different areas appears in the Lum and RGB text boxes. 4 5 You can also create a specific color by typing numbers in the Hue, Sat, Lum or RGB text boxes. 5 - Kyocera KM-1650 | Kyocera Extended Driver 4.0 User Guide Rev-2.1 - Page 114
watermark list, select a watermark to delete. 1 2 Click Delete. 2 3 In the message box, click Yes to confirm the deletion. To refuse the deletion, click No. 3 10-7 KX Driver - Kyocera KM-1650 | Kyocera Extended Driver 4.0 User Guide Rev-2.1 - Page 115
for optional devices, memory, and RAM disk. Driver settings will be updated with information received from the supports two-sided document printing. E EcoPrint Printing mode that reduces the amount of toner placed on the printed page. It extends the life of the toner cartridge. Because toner - Kyocera KM-1650 | Kyocera Extended Driver 4.0 User Guide Rev-2.1 - Page 116
down an image into dots. An experienced user can adjust Halftone screen settings to create shades KM-NET Software that provides network-wide management of printers and copiers. Kyocera Manual duplex Method for printing on both sides of a sheet when the printing system does not support a KX Driver - Kyocera KM-1650 | Kyocera Extended Driver 4.0 User Guide Rev-2.1 - Page 117
driver settings that you save as a group. Once saved, you can select a profile by name and apply its settings to a print job without selecting each feature individually. Prologue/Epilogue Advanced feature that allows you to insert a macro into specific lo- cations in the print job. An advanced user - Kyocera KM-1650 | Kyocera Extended Driver 4.0 User Guide Rev-2.1 - Page 118
print job between two printing systems, effectively doubling print speed and providing backup printing support. Requires installation of the Tandem unit. Temporary job storage Job feature that stores Advanced feature that lets you add semitransparent text to a document. Glossary-4 KX Driver - Kyocera KM-1650 | Kyocera Extended Driver 4.0 User Guide Rev-2.1 - Page 119
KYCW1_78.TTF KYCW1_15.TTF Times New Roman KYCW1_31.TTF KYCW1_17.TTF Times New Roman Bold KYCW1_33.TTF KYCW1_16.TTF Times New Roman Italic KYCW1_32.TTF User Guide A-1 - Kyocera KM-1650 | Kyocera Extended Driver 4.0 User Guide Rev-2.1 - Page 120
Univers Medium Condensed Italic >PN Wingdings KYCW1_34.TTF KYCW1_37.TTF KYCW1_41.TTF KYCW1_38.TTF KYCW1_42.TTF KYCW1_35.TTF KYCW1_39.TTF KYCW1_36.TTF KYCW1_40.TTF KYWD_29.TTF A-2 KX Driver - Kyocera KM-1650 | Kyocera Extended Driver 4.0 User Guide Rev-2.1 - Page 121
Index A Accessing Printer Properties 2-1 Administrator Settings 2-8 job accounting 2-8 operation panel message 2-8 password 2-9 2-3 Punch settings 2-3 Finishing 4-3, 5-1 - 5-3 Firewall 2-13 Font Substitution 6-4 Fonts 6-2 - 6-3, A-1 native download 6-3 G GDI compatible mode 6-4, 6-6 Gloss mode 6-7 - Kyocera KM-1650 | Kyocera Extended Driver 4.0 User Guide Rev-2.1 - Page 122
K KIR 6-2 KM-NET for Clients using to print saved jobs 8-3 KPDL 2-6 - 2-8, 3-5, 6-6 Kyocera Image Refinement printers 2-6 MP tray 3-8 Multiple pages per sheet 3-4, 4-1, 4-3 N Non-Collating 3-16 O Offset 5-4 - 5-5 Operation Panel Message 2-8 Optimization 6-6 Optional devices, installing 2-1 KX Driver - Kyocera KM-1650 | Kyocera Extended Driver 4.0 User Guide Rev-2.1 - Page 123
RAM Disk 2-4 user 2-4 Sorter Modes 3-15 - 3-16 Staple 4-1, 4-3, 5-1 - 5-2 Substitute with device fonts 6-3 - 6-4 System fonts 6-4 T Temporary and Permanent Jobs 8-2 printing 8-3 Toner saturation 6-2 Transparency 3-3, 7-1, 7-8 - 7-9 Transparency Interleaving 7-1 - 7-2, 7-8 - 7-9 User Guide Index-3 - Kyocera KM-1650 | Kyocera Extended Driver 4.0 User Guide Rev-2.1 - Page 124
U Unit of Measurement 2-5 User Settings 2-4 Identification 2-5 language preference 2-5 measurement 2-5 V Virtual Mailbox 8-8, 8-10 - 8-16 assigning 2-3 printing job lists 8-14 printing options 10-5 custom colors 10-6 delete watermark 10-7 edit watermark 10-7 page selection 10-4 Index-4 KX Driver - Kyocera KM-1650 | Kyocera Extended Driver 4.0 User Guide Rev-2.1 - Page 125
- Kyocera KM-1650 | Kyocera Extended Driver 4.0 User Guide Rev-2.1 - Page 126
©2005 KYOCERA MITA Corporation is a trademark of Kyocera Corporation - Kyocera KM-1650 | Kyocera Extended Driver 4.0 User Guide Rev-2.1 - Page 127
ReRviesvio. n2.11.02020050.141.8
Kyocera Extended Driver
Version 4.0
User Guide