Kyocera KM-2030 Kyocera Extended Driver 3.x User Guide Rev-1.4
Kyocera KM-2030 Manual
View all Kyocera KM-2030 manuals
Add to My Manuals
Save this manual to your list of manuals |
Kyocera KM-2030 manual content summary:
- Kyocera KM-2030 | Kyocera Extended Driver 3.x User Guide Rev-1.4 - Page 1
Kyocera Extended Driver User Guide - Kyocera KM-2030 | Kyocera Extended Driver 3.x User Guide Rev-1.4 - Page 2
this guide are for the Windows XP printing environment. Essentially the same operations are used for Windows 95/98/Me/2000 environments. Models supported by the KX printer driver Copier/MFP Printers KM- 1510 KM- 1530 KM- 1810 KM- 1815 KM- 1820 / FS- 1118MFP KM- 2030 KM- 2530 KM- 2550 KM- 3035 KM - Kyocera KM-2030 | Kyocera Extended Driver 3.x User Guide Rev-1.4 - Page 3
CONTENTS Installing the Printer Driver in Windows 1 Hardware Wizard Instructions for Windows XP 7 Installing using the Add Printer Wizard 12 Printer Properties 15 Accessing the printer driver properties 16 Installing Optional Printer Devices 17 Finisher Punch Settings 18 Booklet Stitcher - Kyocera KM-2030 | Kyocera Extended Driver 3.x User Guide Rev-1.4 - Page 4
Page Settings 62 Print Quality ...63 Grayscale Adjustment...65 Font Downloading ...66 Disable Device fonts...67 Selecting Fonts for Substitution 67 Virtual Mailboxes 120 Printing and Saving Temporary and Permanent Jobs 122 Using KM-NET for Clients to Print Saved Jobs Again 123 Using the Barcode - Kyocera KM-2030 | Kyocera Extended Driver 3.x User Guide Rev-1.4 - Page 5
Printing the Job ID using the barcode reader 125 Reading with the Barcode Reader 126 Creating Profiles ...128 Editing Profiles ...130 Deleting Profiles...131 Importing and Exporting Profiles 131 Table of Supported Options 137 Printers 137 Copier/MFP 139 iii - Kyocera KM-2030 | Kyocera Extended Driver 3.x User Guide Rev-1.4 - Page 6
iv - Kyocera KM-2030 | Kyocera Extended Driver 3.x User Guide Rev-1.4 - Page 7
, insert paper and any toner or ink cartridges) and then connect the computer and printer using either USB, a parallel cable, or a network cable. For further details on connecting the printer to the computer, refer to the printer's Operation Guide. 3. Once connected, power on both devices. • If - Kyocera KM-2030 | Kyocera Extended Driver 3.x User Guide Rev-1.4 - Page 8
proceed. 7. Click Install Software. 8. The Welcome to the Kyocera Product Software Installation Wizard dialog box appears. Click Next. 9. The Select Method dialog box appears. For the simple, default installation, select Express Mode, and click Next. Express mode is for USB connection only. In the - Kyocera KM-2030 | Kyocera Extended Driver 3.x User Guide Rev-1.4 - Page 9
Installing the Printer Driver in Windows method you are able to choose which software packages to install. If you wish to use the Custom method, see Custom Installation on page 9 The installation program installs the software. During installation, if your printer is not connected and powered on, you - Kyocera KM-2030 | Kyocera Extended Driver 3.x User Guide Rev-1.4 - Page 10
, see Hardware Wizard Instructions for Windows XP on page 7. In Windows 2000, all USB drivers are automatically installed without action on the part of the user. Express Installation On 9x, Me and XP, the Hardware Wizard will have a line that states the type of USB connection that your equipment is - Kyocera KM-2030 | Kyocera Extended Driver 3.x User Guide Rev-1.4 - Page 11
Installing the Printer Driver in Windows 5. When you have ensured that the location is correct, click Next. 6. Click Next to start the installation. 5 - Kyocera KM-2030 | Kyocera Extended Driver 3.x User Guide Rev-1.4 - Page 12
When the installation of the required software is complete, the following window will display: 7. Click Finish. 8. Click OK 9. Ensure that the file locations is C:\Program Files\Kyocera\KMSL\9xDrviers, and click OK. 6 - Kyocera KM-2030 | Kyocera Extended Driver 3.x User Guide Rev-1.4 - Page 13
OK. Installing the Printer Driver in Windows 11.Ensure that the file locations is C:\Program Files\Kyocera\KMSL\9xDrviers and Instructions for Windows XP These procedures should be performed for Windows XP. For Windows 9x and Me, see Express Installation on page 4. In Windows 2000, all USB drivers - Kyocera KM-2030 | Kyocera Extended Driver 3.x User Guide Rev-1.4 - Page 14
1. Select No, not this time and click Next. 2. Click Next. 3. Click Next. 4. Click Finish. 8 - Kyocera KM-2030 | Kyocera Extended Driver 3.x User Guide Rev-1.4 - Page 15
Installing the Printer Driver in Windows 5. When the installation is complete, the Installation Completed Successfully dialog box appears. Click Finish to leave the install program and return to the disc main menu. Custom Installation The preceding instructions are for the Express method. This - Kyocera KM-2030 | Kyocera Extended Driver 3.x User Guide Rev-1.4 - Page 16
3. Select the software packages you wish to install, and clear the ones you do not you may see a reminder to connect the printer to your computer. Once you have ensured that the printer is connected, if you are using a USB connection, follow the instructions for Express Installation on page 4. 10 - Kyocera KM-2030 | Kyocera Extended Driver 3.x User Guide Rev-1.4 - Page 17
Installing the Printer Driver in Windows Other Options on the Installation CD Other options available on the installation menu are Remove Software, Documentation, View Release Notes, and Select Language. Remove Software uninstalls any software that you have installed from the CD-ROM. The Release - Kyocera KM-2030 | Kyocera Extended Driver 3.x User Guide Rev-1.4 - Page 18
Kyocera printer driver can be obtained from http://www.kyoceramita.com/ Printer Driver download/. Installing using the Add Printer Wizard This section describes how to install a printer driver using the Add Printer Wizard. 1. Click Start in the Windows taskbar, and click Printers and Faxes - Kyocera KM-2030 | Kyocera Extended Driver 3.x User Guide Rev-1.4 - Page 19
Installing the Printer Driver in Windows The wizard can also be launched by clicking Add a printer in the File menu. 3. The Welcome to the Add Printer Wizard dialog box appears. Click Next and follow the instructions. 4. When the Completing the Add Printer Wizard dialog box appears, click Finish. 5. - Kyocera KM-2030 | Kyocera Extended Driver 3.x User Guide Rev-1.4 - Page 20
14 - Kyocera KM-2030 | Kyocera Extended Driver 3.x User Guide Rev-1.4 - Page 21
driver settings including: • Accessing Printer Properties • Installing Optional Devices • User Settings • Page Description Language (PDL) Settings • Administrator Settings • Compatibility Settings Follow the steps below to set your preferred options as the default settings These printer settings - Kyocera KM-2030 | Kyocera Extended Driver 3.x User Guide Rev-1.4 - Page 22
Accessing the printer driver properties 1. Click Start in the Windows® taskbar, and click Printers and Faxes. The Printers and Faxes window appears. Windows 95/98/Me/2000: Open the Start menu, and click Settings-Printers in sequence to display the Print window. 2. Right-click on the printer icon in - Kyocera KM-2030 | Kyocera Extended Driver 3.x User Guide Rev-1.4 - Page 23
can also specify the memory setting, PDL settings for the user, administrator settings for front panel messages passwords, and more. Installing Optional Printer Devices 1. Click the Device Settings tab. 2. In can be installed for each model, refer to Table of Supported Options on page 137. 17 - Kyocera KM-2030 | Kyocera Extended Driver 3.x User Guide Rev-1.4 - Page 24
the Memory combo box, specify the memory capacity of your printer. This setting is required to optimize the downloading of printer fonts. Finisher Punch Settings Select the Finisher check box in the Device Options list and the Punch Unit Setting dialog box appears. Double-click the option to display - Kyocera KM-2030 | Kyocera Extended Driver 3.x User Guide Rev-1.4 - Page 25
Printer Properties Select 2 Hole, 2 & 3 Hole, or 2 & 4 Hole punch option depending on the optional punch unit attached to your finisher to enable hole Stitcher check box in the Device Options list, the Punch Unit Setting dialog box appears. If the device listing is already enabled, double-click on it - Kyocera KM-2030 | Kyocera Extended Driver 3.x User Guide Rev-1.4 - Page 26
the RAM disk is volatile memory, all data sent to the printer is lost if the power is turned off. The size of the RAM disk is specified in settings on the printer operator panel. For further details, consult the printer's Operation Guide. 1. In the Device Options list, enable the RAM Disk check box - Kyocera KM-2030 | Kyocera Extended Driver 3.x User Guide Rev-1.4 - Page 27
Options list on the Device Settings properties page. Auto Configure keeps the printer driver's Device settings consistent with the actual printer devices. Auto Configure currently supported these ports for Windows operating systems: • Windows 98 & ME - KPrint ports (Raw mode, LPR, and IPP) only - Kyocera KM-2030 | Kyocera Extended Driver 3.x User Guide Rev-1.4 - Page 28
the printer is powered off or in the middle of booting up process. In such cases, Auto Configure will display the following message after the time out. User Settings The following user information can be configured by clicking the User... button on the Device Settings tab. • Identification • Unit - Kyocera KM-2030 | Kyocera Extended Driver 3.x User Guide Rev-1.4 - Page 29
Printer Properties • Enter the group to which the user belongs in the Department field. Unit of Measurement Select the inches or the User Settings dialog box choose from inches or millimeters. Language Preference Selection The Language Preference option specifies the language of the driver tabs - Kyocera KM-2030 | Kyocera Extended Driver 3.x User Guide Rev-1.4 - Page 30
on the Device Settings tab. Depending on your printer model, available PDLs may vary. You can choose of the 3-D image. If you receive a PDL printing error, select a different PDL and try again. 1. On from applications that support PostScript 2 or 3. An optional KPDL upgrade kit may be required - Kyocera KM-2030 | Kyocera Extended Driver 3.x User Guide Rev-1.4 - Page 31
Printer Properties • In GDI compatible mode, vector graphics are rasterized for printing as on the Media tab. KPDL Options Allow Data Passthrough Allow Native TrueType Download Descriptions Reduces errors when printing complex jobs from applications that use the PostScript format. Improves - Kyocera KM-2030 | Kyocera Extended Driver 3.x User Guide Rev-1.4 - Page 32
User Login (FS-1118MFP / KM-1820 only) Job Accounting Job Accounting settings are specified by the system administrator to implement an accounting details, refer to Job Accounting in the Operation Manual on the supplied CD-ROM. This function is available on FS-6020 and later printer models. Job Name - Kyocera KM-2030 | Kyocera Extended Driver 3.x User Guide Rev-1.4 - Page 33
. The job name is the name sent from the application to the printer driver or it can be selected in the Job Settings dialog box before printing. Displays the user name during printing. The user name is the information entered according to the instructions in Identification on page 22. Displays the - Kyocera KM-2030 | Kyocera Extended Driver 3.x User Guide Rev-1.4 - Page 34
1. Select the Lock these Settings check box to access the Set Password dialog box. 2. In the Set Password dialog box, enter the new password in the New password field. Re-enter the password in the Confirm new password field and click OK. The password must be between 4 to 16 characters. Changing the - Kyocera KM-2030 | Kyocera Extended Driver 3.x User Guide Rev-1.4 - Page 35
the Job Accounting feature. A maximum of 20 User IDs and passwords can be registered at the printing system, and 100 User IDs and passwords can be stored in the printer driver for use with multiple printing systems. Once User IDs are assigned, you can type the User ID and password. Both User ID and - Kyocera KM-2030 | Kyocera Extended Driver 3.x User Guide Rev-1.4 - Page 36
Administrator privileges will be prompted to enter a User ID and password to print the job. The driver will search for a Windows Login User Name and add this name with the User ID and password to the User ID List in the driver. • If the user has only User privileges, the print job will be cancelled - Kyocera KM-2030 | Kyocera Extended Driver 3.x User Guide Rev-1.4 - Page 37
Properties Saving, Editing, and Deleting User IDs Saving User IDs creates a User ID List so that User Login can be used in User Login mode. The printer driver stores a maximum of 20 User IDs. To save a User ID, follow these steps: 1. In the Device Settings, tab, click Administrator, to open the - Kyocera KM-2030 | Kyocera Extended Driver 3.x User Guide Rev-1.4 - Page 38
User ID List dialog box. Importing and Exporting User IDs You can import an established group of User IDs into the printer driver. This allows multiple users to choose from a standard User ID List in User Login. The imported list will replace all existing User IDs in the driver. To import User IDs - Kyocera KM-2030 | Kyocera Extended Driver 3.x User Guide Rev-1.4 - Page 39
Printer Properties Printing in User Login Mode After User IDs are assigned and User Login mode is set to On at the printing system, you can choose User Login to print in User Login mode. To print in User Login mode with a Specific User ID, follow these steps: 1. In the Device Settings tab, click - Kyocera KM-2030 | Kyocera Extended Driver 3.x User Guide Rev-1.4 - Page 40
Administrator privileges will be prompted to enter a User ID and password to print the job. The driver will search for a Windows Login User Name and add this name with the User ID and password to the User ID List in the driver. • If the user has only User privileges, the print job will be cancelled - Kyocera KM-2030 | Kyocera Extended Driver 3.x User Guide Rev-1.4 - Page 41
Compatibility Settings Printer Properties Compatibility settings can be adjusted settings may result in printing errors. For further details on changing these settings, contact your nearest Kyocera dealer. Setting the Device Compatibility all the parameters to the default by clicking Reset. 35 - Kyocera KM-2030 | Kyocera Extended Driver 3.x User Guide Rev-1.4 - Page 42
when output is face up. 5. Select the Ignore Application Collation check box to bypass the Collate setting in the application, and give priority to the printer driver setting. Click Printing Preferences on the General tab in the Properties dialog box to access collated printing options. 36 - Kyocera KM-2030 | Kyocera Extended Driver 3.x User Guide Rev-1.4 - Page 43
printing tasks when printing from Microsoft® Windows® applications. • Basic Printing Tasks • Duplex Printing • Reverse Order Printing • Printing 1. Insert the proper paper size (such as A4) into the printer's paper cassette. 2. From the application's File menu, select Print. The Print dialog - Kyocera KM-2030 | Kyocera Extended Driver 3.x User Guide Rev-1.4 - Page 44
printing two or more copies, enable the Collate check box for collation. When using Microsoft® Word®, we recommend that you click Options... and select Use printer settings for the default tray. 5. Click OK. 38 - Kyocera KM-2030 | Kyocera Extended Driver 3.x User Guide Rev-1.4 - Page 45
Type drop-down list and select the media type. For further details, refer to Matching the Paper Size before Printing on page 44. • The printer automatically selects paper size that matches the size specified above. A message displays requesting you to fill the multi-purpose tray if the proper paper - Kyocera KM-2030 | Kyocera Extended Driver 3.x User Guide Rev-1.4 - Page 46
-right corner of the document. For further details, refer to Reverse Order Printing on page 53. 9. Click OK to return to the Print dialog box. 10.Click OK to start printing. 40 - Kyocera KM-2030 | Kyocera Extended Driver 3.x User Guide Rev-1.4 - Page 47
Printing from Applications Using a Different Print Size This section describes how to print documents of different sizes than the original document. The document image is automatically adjusted to match the output page size. 1. In the Properties dialog box, click the Media tab. 2. In the Page Size - Kyocera KM-2030 | Kyocera Extended Driver 3.x User Guide Rev-1.4 - Page 48
Printing Multiple Pages Per Sheet You can print by arranging multiple pages of the source document on a single sheet of paper. When this function is enabled, the Scaling option is disabled. 1. In the Properties dialog box, click the Layout tab. 2. Specify the number of source pages in the Pages per - Kyocera KM-2030 | Kyocera Extended Driver 3.x User Guide Rev-1.4 - Page 49
enter the scale percentage into the Scaling (20-500%) field, or adjust the value as needed. For Windows 95 or 98, scaling is 20 - 480%. 2. If you click Advanced..., you can adjust the outside to enlarge an A4-size brochure for printing on A3 paper), refer to Using a Different Print Size on page 41. - Kyocera KM-2030 | Kyocera Extended Driver 3.x User Guide Rev-1.4 - Page 50
tab by default when you are printing on regular paper. However, the printer supports a wide variety of printing media depending on your printer model. the instructions outlined in the supplied printer's Operation Guide. When paper is loaded properly in the paper cassette, the printer can - Kyocera KM-2030 | Kyocera Extended Driver 3.x User Guide Rev-1.4 - Page 51
Printing from Applications 4. Select the document paper size from the Page Size drop-down list. 5. From the Media Type drop-down list, select the type of media for printing, then click OK. 45 - Kyocera KM-2030 | Kyocera Extended Driver 3.x User Guide Rev-1.4 - Page 52
64 to 90 g/m2 Transparency Preprinted Labels Bond (securities) Recycled Vellum Less than 64 g/m2 Rough 90 to 200 g/m2 Letterhead Color 64 (MP tray) All Refer to the next section. Once printing begins, the printer automatically selects the paper to match the paper size and specified media type. If - Kyocera KM-2030 | Kyocera Extended Driver 3.x User Guide Rev-1.4 - Page 53
For further details, refer to the printer's Operation Guide. 2. Click Start in the Windows taskbar to access the printer driver properties and then select the Printers and Faxes. The Printers and Faxes window appears. Windows 95/98/Me/2000: Access the printer driver properties by clicking the Start - Kyocera KM-2030 | Kyocera Extended Driver 3.x User Guide Rev-1.4 - Page 54
boxes in millimeters or inches. (Units are selected from the User dialog box of the Device printers) 216 × 356 MM. (8.5 x 14 inches) Minimum (A3 printers) 148 × 210 MM. (5.8 x 8.3 inches) Largest (A3 printers) 297 × 450 MM. (11.7 x 17.7 inches) MP tray 70 × 148 mm (Portrait) Duplexer unit - Kyocera KM-2030 | Kyocera Extended Driver 3.x User Guide Rev-1.4 - Page 55
you want to add other custom paper sizes. A maximum of 20 different paper sizes can be added. Printing with Custom Paper Sizes 1. From the applications's Printer Properties, access the Print dialog box. (Select Print from the File menu.) 2. On the Media tab, select the name of your saved paper size - Kyocera KM-2030 | Kyocera Extended Driver 3.x User Guide Rev-1.4 - Page 56
printing option. In order to activate this printing option, the duplex unit must be installed, and additional memory may be required depending on the printer model. For further details, refer to the printer's Operation Guide. In the table below, the paper sizes and media types are not available - Kyocera KM-2030 | Kyocera Extended Driver 3.x User Guide Rev-1.4 - Page 57
the Media tab. The steps for using Manual Duplex may vary, depending on your printer, what printer accessories you have installed, and what Manual Duplex checkbox, as show above. When this option is selected, the odd pages are printed and then a message (shown below) displays telling the user - Kyocera KM-2030 | Kyocera Extended Driver 3.x User Guide Rev-1.4 - Page 58
Some Kyocera printers have a manual duplex setting in Printer Preferences, on the Layout page. Instructions for using this method for manual duplex printing are below. If the Properties or Preferences dialog boxes for your printer don't have manual duplex settings, look for an option to print just - Kyocera KM-2030 | Kyocera Extended Driver 3.x User Guide Rev-1.4 - Page 59
. 8. With Flip on Short Edge selected, turn the stack over on the short edge and put the pages into the cassette. 9. Click OK in the Manual Duplex Instruction dialog box. The odd-numbered pages will be printed. Prints document pages in reverse order, from the last page to the first. When heavy or - Kyocera KM-2030 | Kyocera Extended Driver 3.x User Guide Rev-1.4 - Page 60
Printing Watermarks When printing using watermarks, your preferred text is printed in the document background. You can choose one of four standard watermarks or enter your own text. Selecting the Watermark 1. From the application's Print dialog box, access the Properties. (Select Print from the File - Kyocera KM-2030 | Kyocera Extended Driver 3.x User Guide Rev-1.4 - Page 61
Printing from Applications Adding Watermarks You can enter the text for a new watermark. The text font, color, size, and style can be adjusted. 1. From the application's Print dialog box, access the Properties. (Select Print from the File menu and select Properties.) 2. Click the Watermark tab. 3. - Kyocera KM-2030 | Kyocera Extended Driver 3.x User Guide Rev-1.4 - Page 62
from the Font drop-down list. 8. In the Text Attributes group box, specify the Color setting. • Monochrome printers: Select 10% Gray to 90% Gray or Black in the Color dropdown list. • Color printers: Select from the Color drop-down list, or select Custom to choose additional colors. 9. In the Text - Kyocera KM-2030 | Kyocera Extended Driver 3.x User Guide Rev-1.4 - Page 63
regular, italic, bold, or bold and italic. 11. Click OK. Selecting and Creating Custom Colors (Color printers only) In the color setting, selecting the Custom option displays the standard Windows colors. In addition to the basic system colors, you can also create customized colors. 1. When you set - Kyocera KM-2030 | Kyocera Extended Driver 3.x User Guide Rev-1.4 - Page 64
2. On the color matrix, enter the numerical values for the hue, saturation, and luminosity levels. The created color appears in the Color/Solid box. Luminosity Adjustment • Hue and Saturation (Sat) Adjustment: - Click and drag the pointer left/right or up/down to adjust the hue and saturation levels - Kyocera KM-2030 | Kyocera Extended Driver 3.x User Guide Rev-1.4 - Page 65
Defined to specify the text position. • User Defined: Bases the watermark text position on the X and Y values for the horizontal and vertical coordinates. • Center on Page: Places the watermark text in the center of the page. Manual Adjustment: Select the Move option and hold the left mouse button - Kyocera KM-2030 | Kyocera Extended Driver 3.x User Guide Rev-1.4 - Page 66
• Manual Adjustment: You can select Rotate and hold the left mouse button while dragging the watermark image at left to the desired angle. • Select User Defined in the Text Position field and then Angle in the Text Angle. Activate the Select Rotation around Center of Text check box. 4. Specify the - Kyocera KM-2030 | Kyocera Extended Driver 3.x User Guide Rev-1.4 - Page 67
Properties dialog box appears. Adjust the text position and other settings as desired. For further details, refer to Adding Watermarks on page 55, step 5 to 10 and Positioning Watermarks on page 59, step 1 to 3. 61 - Kyocera KM-2030 | Kyocera Extended Driver 3.x User Guide Rev-1.4 - Page 68
text. Enter the pages in the text box to print the watermark on specific pages. For example, to print the watermark on pages 1, 3, 5, 6, 7, 8, 9, 10, 11, and 12, enter [ 1,3,5-12 ]. 2. Select the Print Onto Cover check box to select the cover page for printing the watermark. Enable the Cover Mode - Kyocera KM-2030 | Kyocera Extended Driver 3.x User Guide Rev-1.4 - Page 69
life of the toner cartridge, making it both economical and ecological. Because toner saturation is reduced, the entire image, text and graphics, appears lighter in the printed job. EcoPrint does not increase print speed. 1. From the Print dialog box of the application, access the printer Properties - Kyocera KM-2030 | Kyocera Extended Driver 3.x User Guide Rev-1.4 - Page 70
FS-3800 support 1200 dpi fast mode. Smoothes the outline of text and vector graphics. For color printers, this option is only available when printing in monochrome mode. Depending on the model, choose from On, Off, 75%, or 50%. These options enable you to extend the use of your toner cartridges by - Kyocera KM-2030 | Kyocera Extended Driver 3.x User Guide Rev-1.4 - Page 71
Adjustment The Grayscale Adjustment setting is used for adjusting the brightness and contrast of graphics produced by monochrome printers. This setting is available on color printer models when the monochrome option is active. Text remains unchanged. Use the mouse to drag the slider horizontally - Kyocera KM-2030 | Kyocera Extended Driver 3.x User Guide Rev-1.4 - Page 72
with Device fonts 3. Click OK to save the Font Settings. True Type Font Options Download TrueType fonts as outlines Download TrueType fonts as bitmap Substitute with Device fonts Descriptions Sends fonts to the printer system as outline fonts when using multiple fonts and font sizes. This option - Kyocera KM-2030 | Kyocera Extended Driver 3.x User Guide Rev-1.4 - Page 73
activate Font Substitution. Displays the available fonts in the Font Substitution dialog box. The fonts installed on your computer are listed in the System Fonts, and the printer fonts are listed in Available Device Fonts. 2. Select your preference for substitution from the Available Device Fonts - Kyocera KM-2030 | Kyocera Extended Driver 3.x User Guide Rev-1.4 - Page 74
descriptions below. Options Print Text as Black Print Graphics as Black (monochrome printers only) Descriptions Prints color and gray characters in black. There is no image file format This function is enabled in Computer Aided Design (CAD) applications only. 3. Click OK to save the settings. - Kyocera KM-2030 | Kyocera Extended Driver 3.x User Guide Rev-1.4 - Page 75
Descriptions (Recommended) Delivers image data in binary format. You can reduce the amount of spooler data and raise printing speed. Delivers image data in ASCII (7 bit) format. 69 - Kyocera KM-2030 | Kyocera Extended Driver 3.x User Guide Rev-1.4 - Page 76
. Refer to the options and descriptions below. Options Print Text as Black Print Graphics as Black (monochrome printers only) Reverse Image Mirror Print Halftone Screen (monochrome printers only) Descriptions Prints color and gray characters in black. There is no effect on white text, color - Kyocera KM-2030 | Kyocera Extended Driver 3.x User Guide Rev-1.4 - Page 77
box. The Halftone Screen Settings dialog box appears. 2. Clear the Use Printer's Default Screens check box. 3. Select from the drop-down list for each of lines and units for halftone dots. The units are lines/cm or lines/inch. Enter a value in the Frequency box, and select the units from the drop- - Kyocera KM-2030 | Kyocera Extended Driver 3.x User Guide Rev-1.4 - Page 78
below. 1. From the Print dialog box of the application, access the printer Properties. Select Properties in the Print dialog box opened from the File Custom Descriptions Uses the four toner colors to print text and graphics in full color. Uses only the black toner for black-and-white printing. - Kyocera KM-2030 | Kyocera Extended Driver 3.x User Guide Rev-1.4 - Page 79
. Pixels are printed in multiple layers. This mode is best for printing photographs. Enhances the luster of printing. Gloss Mode is not supported for duplex printing. Converts color data to grayscale for printing. This function can be used for a preview before printing in color mode. Gray Component - Kyocera KM-2030 | Kyocera Extended Driver 3.x User Guide Rev-1.4 - Page 80
different color spaces of color printers. A set of parameters called a profile is selected and applied. The KX printer driver offers a variety of Ink Simulation (CMYK) Descriptions Color matching is performed based on default color settings. For details, refer to Color Reproduction Settings on - Kyocera KM-2030 | Kyocera Extended Driver 3.x User Guide Rev-1.4 - Page 81
all print jobs, such as business logos. Optimize for Color Contrast Utilizes images or scanned photographs containing many (Best for Images) colors or shades of color. Optimize for Color . To make this function effective, set the Color Profile as the default on the Color Management tab. 75 - Kyocera KM-2030 | Kyocera Extended Driver 3.x User Guide Rev-1.4 - Page 82
to those used in the monitor display. • Text and graphics are printed in vivid colors. • Text and graphs are printed in black using four color toners (CMYK). • Images are printed in colors close to those used in the monitor display. • Text and graphics are printed in vivid colors. • Images and - Kyocera KM-2030 | Kyocera Extended Driver 3.x User Guide Rev-1.4 - Page 83
Color Adjustment Settings -- HSL You can save the three Color Adjustment settings as a Custom selection. The setting options and saving instructions are described below. 1. From the Color Adjustment drop-down list, choose Custom 1, Custom 2, or Custom 3. 2. Click the [...] button next to - Kyocera KM-2030 | Kyocera Extended Driver 3.x User Guide Rev-1.4 - Page 84
, or Magenta from the Hue Adjustment drop-down list. Or drag the slider to the right or left to increase or decrease the values between -10 and +10. • Default settings: Click the Reset button to return to the original factory default settings. 78 - Kyocera KM-2030 | Kyocera Extended Driver 3.x User Guide Rev-1.4 - Page 85
6. Adjust the Saturation and Lightness. • Drag the slider to adjust the Saturation, Lightness, and Contrast, or increase or decrease the values between -10 and +10. • Click the Reset button to return to the original factory default settings. 7. Click OK. 8. Click OK to save the settings. 79 - Kyocera KM-2030 | Kyocera Extended Driver 3.x User Guide Rev-1.4 - Page 86
Color Adjustment Settings -- RGB You can save the three Color Adjustment settings as a Custom selection. The setting options and saving instructions are described below. 1. From the Color Adjustment drop-down list, choose Custom 1, Custom 2, or Custom 3. 2. Click the [...] button next to the drop- - Kyocera KM-2030 | Kyocera Extended Driver 3.x User Guide Rev-1.4 - Page 87
of red, green, and blue based on the monitor settings. • Drag each slider of the RGB setting, or increase or decrease the values between -10 and +10 in the spin box. • Click the Reset button to restore the original default settings. 6. Click OK to save the color adjustment settings. 7. Click OK. 81 - Kyocera KM-2030 | Kyocera Extended Driver 3.x User Guide Rev-1.4 - Page 88
82 - Kyocera KM-2030 | Kyocera Extended Driver 3.x User Guide Rev-1.4 - Page 89
This section describes useful functions of the printer driver. The properties boxes described here may differ from those for your printer. The Staple feature is available on printers with an optional finisher installed. If a booklet stitcher unit is installed, the Booklet Printing feature is - Kyocera KM-2030 | Kyocera Extended Driver 3.x User Guide Rev-1.4 - Page 90
Using the Stapler When the paper size is A4, B5, or Letter, the Orientation must be set to Rotated in order to staple the upper-right corner. For further details, see the explanation on page 40 in step 8 in the Basic Printing Tasks section. 1. From the application's Print dialog box, access - Kyocera KM-2030 | Kyocera Extended Driver 3.x User Guide Rev-1.4 - Page 91
printed document is stapled by the finisher and delivered to the output tray. For further details about stapler specifications, refer to your supplied finisher Operation Guide. 85 - Kyocera KM-2030 | Kyocera Extended Driver 3.x User Guide Rev-1.4 - Page 92
it is delivered to the output tray. Output direction Offset is available on printers with a supported finisher (optional) installed. After installation, optional equipment must be recognized by the printer driver (device settings). For further details, refer to Installing Optional Devices on page 17 - Kyocera KM-2030 | Kyocera Extended Driver 3.x User Guide Rev-1.4 - Page 93
holes (two holes) in each printed page. The Punch feature is available on printers with supported optional finisher installed. After installing the printer driver, optional equipment must be selected in the driver in order to use the punch option (device settings). For further details, refer - Kyocera KM-2030 | Kyocera Extended Driver 3.x User Guide Rev-1.4 - Page 94
driver. When the Cover Mode, Page Insert, and Transparency Interleaving options are used with the multi-purpose tray, cassette mode (the default setting), must be set. For further details, refer to the print system's Operation Guide duplexer must be connected in order to print the printer Properties - Kyocera KM-2030 | Kyocera Extended Driver 3.x User Guide Rev-1.4 - Page 95
Useful Functions 3. Select the Cover Mode check box. Select your desired page arrangement as shown in the following table. 89 - Kyocera KM-2030 | Kyocera Extended Driver 3.x User Guide Rev-1.4 - Page 96
Printing (page 50). Front cover • Prints on the inside surface of the front cover. Front 5Print Onto Front Outside 5Print Onto Front Inside Duplex Printing (page 50). Front cover • Prints on the outside and inside surfaces of the front cover. Front and Back Front cover • Inserts blank front - Kyocera KM-2030 | Kyocera Extended Driver 3.x User Guide Rev-1.4 - Page 97
Front cover • Prints on the inside surface of the front cover and inserts a blank back cover. Back cover Front and Back 5Front Outside 5Front Inside Duplex Printing (page 50). Front cover • Prints on both sides of the front cover and inserts a blank back cover. Back cover Front and Back 5Back - Kyocera KM-2030 | Kyocera Extended Driver 3.x User Guide Rev-1.4 - Page 98
cover Front and Back 5Front Outside 5Front Inside 5Back Inside 5Back Outside Duplex Printing (page 50). Front cover • Prints on both sides of the tray. Media type selections are not supported for the following models: KM-1510, KM-1530, KM-1810, KM04230, KM-5230, and KM-6230. 5. Click OK to return - Kyocera KM-2030 | Kyocera Extended Driver 3.x User Guide Rev-1.4 - Page 99
a designated page. You can also print on the inserted paper. If a duplexer unit is installed, you can also print on the reverse of the inserted paper. Although Printing 1. From the application's Print dialog box, access the printer Properties. (Select Print from the File menu and select Properties - Kyocera KM-2030 | Kyocera Extended Driver 3.x User Guide Rev-1.4 - Page 100
3. Select the Page Insert check box. Select the check box corresponding to your desired page arrangement as shown in the following table. To print on both the front and back of the inserted page, enable the Print onto Front and Print onto Back check boxes. 94 - Kyocera KM-2030 | Kyocera Extended Driver 3.x User Guide Rev-1.4 - Page 101
before the second page. 5Page Insert 5Print onto Front Inserted page • Prints on the outside surface of the inserted page. 5Page Insert 5Print onto Back Duplex Printing (page 50). Inserted page • Prints on the inside surface of the inserted page. 5Page Insert 5Print onto Front 5Print onto Back - Kyocera KM-2030 | Kyocera Extended Driver 3.x User Guide Rev-1.4 - Page 102
5. From the Media for Page drop-down list, select the media type of the inserted page or the source paper cassette. When you choose the media type, a source cassette that matches that media is automatically selected. Heavy, thin, or other special papers must be supplied from the multi-purpose tray. - Kyocera KM-2030 | Kyocera Extended Driver 3.x User Guide Rev-1.4 - Page 103
Useful Functions Transparency Interleaving Method 1. From the application's Print dialog box, access the printer Properties. Select Print from the File menu and select Properties. 2. From the Source drop-down list on the Media tab, select Multi-Purpose Feeder. 3. From - Kyocera KM-2030 | Kyocera Extended Driver 3.x User Guide Rev-1.4 - Page 104
. 7. Click OK to return to the Media dialog box. 8. Click OK to return to the Print dialog box. 9. Load transparency into the multi-purpose tray. 10.Click OK and begin printing. 98 - Kyocera KM-2030 | Kyocera Extended Driver 3.x User Guide Rev-1.4 - Page 105
, then bind it in the center. Booklet printing is available with printers equipped with duplexers. Stapling and binding requires optional document finishers. For further details on Staple settings, refer to Staple on page 83. The supported paper sizes for Booklet Mode printing are A3, ledger, B4, A4 - Kyocera KM-2030 | Kyocera Extended Driver 3.x User Guide Rev-1.4 - Page 106
of the list and set the number of sheets to staple together. The maximum number of sheets that can be stapled with booklet mode is 10 (40 pages). When printing documents that have more than 40 pages, the pages over 40 will be separated and printed in groups of 40 each - Kyocera KM-2030 | Kyocera Extended Driver 3.x User Guide Rev-1.4 - Page 107
Guide. Frequently, the application settings are given priority, causing a change in the sorter output method depending on the application. Verify these settings before printing your documents. Sorter Modes There are three sorter modes to choose from. These modes are selected on the printer driver - Kyocera KM-2030 | Kyocera Extended Driver 3.x User Guide Rev-1.4 - Page 108
the paper from the tray. Mailbox Tray 1 Tray 2 Tray 3 Tray 4 Tray 5 • The mailbox mode produces copies in specified user trays, which is useful when the printer is shared among different users. For example, specifying tray 5 produces a copy of the document in tray 5. • If a tray becomes full, the - Kyocera KM-2030 | Kyocera Extended Driver 3.x User Guide Rev-1.4 - Page 109
Useful Functions Collating 1. Access the Properties and click the Output tab. 2. From the Output to drop-down list, select Mailbox Face-down. 3. Select the Collate check box. 4. Select the number of complete sets in the Copies combo box. When printing using the collate option, specify the number of - Kyocera KM-2030 | Kyocera Extended Driver 3.x User Guide Rev-1.4 - Page 110
Non-Collating Clearing the Collate check box produces page 1 in tray 1 and page 2 in tray 2. 1. Access the Properties and click the Output tab. 2. From the Output to drop-down list, select Mailbox Face-down. 3. Clear the Collate check box. Click OK to return to the application's Print dialog box and - Kyocera KM-2030 | Kyocera Extended Driver 3.x User Guide Rev-1.4 - Page 111
be used when printing onto A4 paper. The MP tray can also be used as a paper source. This function requires a hard disk installed in the printer or a RAM Disk. For further details on Hard Disk settings, refer to RAM Disk Settings on page 20. Using Rotate Collate 1. Access the Properties and - Kyocera KM-2030 | Kyocera Extended Driver 3.x User Guide Rev-1.4 - Page 112
functions as listed below. Printer Driver Menu Function Options Job Deletion after Access Code Panel Message Default number Printing (Category) of pages printed Quick Copy After printing a job, you Saved until No can reprint it from the printer power is printer operator panel. turned off - Kyocera KM-2030 | Kyocera Extended Driver 3.x User Guide Rev-1.4 - Page 113
Useful Functions Quick Copy After using the quick copy feature, a document can be reprinted from the operator panel. 1. In the Properties dialog box, click the Output tab, and then click Job Settings. The Job Settings dialog box appears. 2. In the Job Settings dialog box, enable the Job Storage (e- - Kyocera KM-2030 | Kyocera Extended Driver 3.x User Guide Rev-1.4 - Page 114
the MENU key on the printer operator panel. 2. Press the user name. 6. If the user name is correct, press the ENTER key. Otherwise, press the T or S key until the correct name appears. 7. Press the ENTER key. Follow the instructions to specify the number of copies. 10. Press the ENTER key. The Quick - Kyocera KM-2030 | Kyocera Extended Driver 3.x User Guide Rev-1.4 - Page 115
Hold 1. Access the Job Settings dialog box as indicated in the instructions for Quick Copy on page 107. Select Proof and Hold. 2. jobs will remain saved on the hard disk until the printer is turned off. To delete jobs manually, use the same key operations as explained in Deleting Quick Copy Jobs on - Kyocera KM-2030 | Kyocera Extended Driver 3.x User Guide Rev-1.4 - Page 116
Job Settings dialog box as indicated in the instructions for Quick Copy on page 107. Select Private Print. 2. Enter four digits with any numbers between 0 and 9 for the Access Code. When you want to print a saved job, enter the access code on the printer operator panel. 3. You can name the job for - Kyocera KM-2030 | Kyocera Extended Driver 3.x User Guide Rev-1.4 - Page 117
following the instructions in the Identification on page 22. If this is the correct job for printing, press the ENTER key. Otherwise, press the T or S key until the correct job name appears, then press the ENTER key. 9. Enter the four-digit access code created in Private Print on page 110. 10. Press - Kyocera KM-2030 | Kyocera Extended Driver 3.x User Guide Rev-1.4 - Page 118
printer is switched off. You can also use access codes to restrict the printing of forms. 1. Access the Job Settings dialog box as indicated in the instructions stored jobs will remain saved even after the printer is switched off. To delete them manually, follow the same steps as for Deleting Quick - Kyocera KM-2030 | Kyocera Extended Driver 3.x User Guide Rev-1.4 - Page 119
users. Jobs posted to a virtual mailbox can be printed later from the printer saved if the printer is switched off. feature is available when the printer is set to emulate HP Use the printer driver to select printer model and the size of the hard disk installed. For example, an ECOSYS FS-1800 printer - Kyocera KM-2030 | Kyocera Extended Driver 3.x User Guide Rev-1.4 - Page 120
Start in the Windows taskbar, and click Printers and Faxes to open the Printer and Fax window. 2. Right-click the icon for your printer in the Printers and Faxes window. A drop-down Name. For example, name the mailbox after the user or department. The name can be up to 31 characters in length. 114 - Kyocera KM-2030 | Kyocera Extended Driver 3.x User Guide Rev-1.4 - Page 121
255 for the Mailbox Number. You can enter commas and hyphens to organize multiple mailboxes for the same user. In the following example, when the numbers 1, 3, 6, 8-12 are entered, mailboxes 1, 3, 6, 8, 9, 10, 11, and 12 will be assigned to the name specified in Mailbox Name. Print jobs are saved in - Kyocera KM-2030 | Kyocera Extended Driver 3.x User Guide Rev-1.4 - Page 122
list of virtual mailboxes created in the previous section onto your personal computer. Once saved, the list can be read by other printer drivers. 1. Follow the instructions in the previous section to display the Hard Disk Settings of the printer driver that will be the source of the list. Click the - Kyocera KM-2030 | Kyocera Extended Driver 3.x User Guide Rev-1.4 - Page 123
Useful Functions 5. The Import VMB List dialog box appears. Select the virtual mailbox data file you wish to read from the Look in drop-down list. 6. Click the virtual mailbox list name and click Open. 7. The virtual mailbox list is opened and displayed in the Defined Names group box. Click OK to - Kyocera KM-2030 | Kyocera Extended Driver 3.x User Guide Rev-1.4 - Page 124
Saving Jobs in Virtual Mailboxes 1. From the application's Print dialog box, access the Properties. Select Print from the File menu and select Properties. 2. Open the Properties dialog box, and click the Output tab. 3. Click the Job Settings... button to open the Job Settings dialog box. 4. Select - Kyocera KM-2030 | Kyocera Extended Driver 3.x User Guide Rev-1.4 - Page 125
. In addition, you can print a list of jobs saved in virtual mailboxes as a Virtual Mailbox List. The list is printed from the printer operator panel. 1. On the printer operator panel, press the MENU key. 2. Press the S or T key repeatedly until e-MPS > is displayed. 3. Press the X key to access the - Kyocera KM-2030 | Kyocera Extended Driver 3.x User Guide Rev-1.4 - Page 126
Printing Jobs in Virtual Mailboxes Jobs are printed from the printer's operator panel. 1. On the printer operator panel, press the MENU key. 2. Press the S or T key repeatedly until e-MPS > appears. 3. Press the X key to access the submenu. 4. Press the S or T key - Kyocera KM-2030 | Kyocera Extended Driver 3.x User Guide Rev-1.4 - Page 127
job IDs and printed after saving by an application (KM-NETJob Manager). • Barcode Print Output is supported and facilitates future printing with an optional barcode reader. • Both types of jobs are saved on the hard disk, up to the user - Kyocera KM-2030 | Kyocera Extended Driver 3.x User Guide Rev-1.4 - Page 128
Check that your printer has an optional Temporary or Permanent. 5. When printing a job with a job ID barcode, open the Barcode Option dialog box and make the appropriate permanent jobs, the dedicated KM-NET Job Manager utility is required. For further details, refer to Using KM-NET for Clients to - Kyocera KM-2030 | Kyocera Extended Driver 3.x User Guide Rev-1.4 - Page 129
utility must first be installed on your computer. The utility is located on the supplied Kyocera Software Library CD-ROM. The KM-NET for Clients communicates with the printer using TCP/IP protocol. To make a local connection with your computer, the KX printer driver must be installed on it. 1. From - Kyocera KM-2030 | Kyocera Extended Driver 3.x User Guide Rev-1.4 - Page 130
printer to connect and click Finish to return to the main dialog box of the KM- NET for Clients. 6. Select the printer icon displayed in the main dialog box and click Job Manager. Print jobs saved in the printer hard disk. To delete jobs manually, right-click on the job name and select Delete from the - Kyocera KM-2030 | Kyocera Extended Driver 3.x User Guide Rev-1.4 - Page 131
You can reprint saved print jobs using the optional barcode reader. Use the printer's serial interface to connect the barcode reader to the printer. When initially printing a job, follow the steps below to print a barcode representing the job ID on each page or on the cover page only. {28L016T50} By - Kyocera KM-2030 | Kyocera Extended Driver 3.x User Guide Rev-1.4 - Page 132
characters with the barcode, as shown in the diagram below, enable the Print Barcode ID check box. {28L016T50} 8. From the Position drop-down list, select the barcode position. Reading with the Barcode Reader When the printed job ID is read by the barcode reader, the printer outputs that page. 126 - Kyocera KM-2030 | Kyocera Extended Driver 3.x User Guide Rev-1.4 - Page 133
are printed. This feature requires switching the serial interface mode to work with the barcode reader. For further details, refer to the barcode reader's Operation Guide. Barcode Reader Job Code Using the Barcode Reader to Read the Job - Kyocera KM-2030 | Kyocera Extended Driver 3.x User Guide Rev-1.4 - Page 134
, they can be easily recalled, eliminating the need to reset them on the dialog box tabs. Profiles can be easily added, edited, or deleted. Profiles from other printers can also be read. If a shared profile is installed when printer driver option settings are being set, its icon is displayed in - Kyocera KM-2030 | Kyocera Extended Driver 3.x User Guide Rev-1.4 - Page 135
Profile tab. 9. The Profile Selections displays the icon, and name, and the Profile Information displays the settings and comment. Click Use to activate the displayed printer settings. 129 - Kyocera KM-2030 | Kyocera Extended Driver 3.x User Guide Rev-1.4 - Page 136
Editing Profiles The Name, Icon Style, Icon Color, and Description of created and shared profiles can be edited. 1. From the application's Print dialog box, access the Properties. (Select Print from the File menu and select Properties.) 2. Click the Profile tab in the Properties dialog box. 3. - Kyocera KM-2030 | Kyocera Extended Driver 3.x User Guide Rev-1.4 - Page 137
computer and have it read by other printers. The profiles on several printers can be shared. Print results may vary depending on the printer Select Print from the File menu and select Properties.) 2. In the source printer driver, click the Profile tab in the Properties dialog box. 3. Select the - Kyocera KM-2030 | Kyocera Extended Driver 3.x User Guide Rev-1.4 - Page 138
enter a name for the file in the File name field, and click Save. Close the Properties dialog box. Read source 5. In the destination printer driver, click the Profile tab in the Properties dialog box. Click Import.... Read Destination 6. The Import Profile dialog box appears. Select the profile from - Kyocera KM-2030 | Kyocera Extended Driver 3.x User Guide Rev-1.4 - Page 139
want to continue?", there are unusable functions in this profile. Click OK to return to the Profile tab. Read destination The profile read by the printer driver displays in the Profile Selections, and profile reading is finished. Read destination 133 - Kyocera KM-2030 | Kyocera Extended Driver 3.x User Guide Rev-1.4 - Page 140
You can configure detailed settings in the Prologue/Epilogue tab. For further details, refer to step 8 on page 2.The Welcome to the Kyocera Printer Installation Wizard dialog box appears. Click Next. • This function hides the PRESCRIBE command in the document. This allows execution of settings such - Kyocera KM-2030 | Kyocera Extended Driver 3.x User Guide Rev-1.4 - Page 141
, Layout, Imaging, Color, Output, Prologue/ Epilogue, Watermark, and Device Settings tabs. By simply clicking Setting Information... on the Printing Preferences/Properties dialog box, current driver settings can be displayed in a tree view. Displayed settings may vary depending on the PDL. 135 - Kyocera KM-2030 | Kyocera Extended Driver 3.x User Guide Rev-1.4 - Page 142
136 - Kyocera KM-2030 | Kyocera Extended Driver 3.x User Guide Rev-1.4 - Page 143
Table of Supported Options Printers Model Enhancement Unit A Paper Feeder B Envelope Feeder Duplex unit FS- 1010 A PF-17 x 1 FS- 1018MFP A PF-17 x 1 FS- 1020D A PF-17 x 1 FS- 1050 A PF-17 x 1 FS- 1118 / KM- 1820 PF-17 x 1 FS- 1900 A PF-60 x 3 or A PF-8E B EF-60 FS- 1920 A PF-60 x 3 B - Kyocera KM-2030 | Kyocera Extended Driver 3.x User Guide Rev-1.4 - Page 144
+ FS- 3700+ FS- 3718M FS- 3750 FS- 3800 FS- 5900C FS- 6750 FS- 6900 FS- 7000+ FS- 7028M FS- 8000C FS- 9000 Enhancement Unit A Paper Feeder B Envelope Feeder Duplex unit A PF-20/21 x 2 A PF-7E x 1 DU-21 A PF-20 x 2 or A PF-7E x 1 B EF-1 A PF-21 x 2 or A PF-7E x 1 B EF-1 A PF-21 x 2 or A PF - Kyocera KM-2030 | Kyocera Extended Driver 3.x User Guide Rev-1.4 - Page 145
PF-70 x 2 or B PF-75 KM-3530 KM-4030 KM-4230 KM-4035 A PF-70 x 2 B PF-70 x 2 or B PF-75 A PF-70 x 2 B PF-70 x 2 or B PF-75 A MD-10 x 2 B MD-10 x 2 B ST-8 A PF-70 x 2 B PF-70 x 2 or B PF-75 KM-4530 KM-5035 A Standard A PF-70 x 2 B PF-70 x 2 or B PF-75 Duplex Unit Job Separator A Inner Finisher - Kyocera KM-2030 | Kyocera Extended Driver 3.x User Guide Rev-1.4 - Page 146
Model KM-5230 KM-5530 KM-6230 KM-6330 KM-7530 KM-C830 KM-C850 Enhancement Unit A Paper Feeder B Optional Feeder A MD-10 x 2 A ST-8 A Standard B ST-11 A MD-10 x 2 A ST-8 B ST-11 A MD-10 x 2 A ST-8 B ST-11 A MD-10 x 2 A ST-8 B ST-11 A PF-30A B PF-30A A PF-30A B PF-30A Duplex Unit Standard Standard - Kyocera KM-2030 | Kyocera Extended Driver 3.x User Guide Rev-1.4 - Page 147
- Kyocera KM-2030 | Kyocera Extended Driver 3.x User Guide Rev-1.4 - Page 148
©2005 is a trademark of Kyocera Corporation - Kyocera KM-2030 | Kyocera Extended Driver 3.x User Guide Rev-1.4 - Page 149
Rev. 1.4 2006.1
Kyocera Extended Driver
User Guide