Kyocera KM-4050 3050/4050/5050 Operation Guide Rev-3 (Basic) - Page 183

Troubleshooting Error Message Checkpoints Corrective Actions Reference Page Reset all originals in Are there any originals left in Remove originals from the document - Document Processor. the document processor? processor. Scanner memory is - full. Scanning cannot be performed due - to insufficient memory of scanner. The job is canceled. Press [End]. Is the acceptable scanning Press [Continue] to print, send or - count exceeded? store the scanned pages. Press [Cancel] to cancel printing, sending or storing. Send error. - Job is canceled. Press [End]. #### An error has occurred during transmission. The possible error codes and their descriptions are as follows. 1101: The server name of the SMTP server is not set correctly or the host name is incorrect when sending scan data to an FTP server. Use COMMAND CENTER and register the SMTP server name and the host name correctly. 1102: The login user name is incorrect or the domain name has not been entered. Enter login user name, domain name and password correctly. 1103: The network path name is incorrect or you do not have access to the folder specified. Use COMMAND CENTER and register the path name correctly. 1104: No recipient address. Enter Email address correctly. 1105: E-mail - The SMTP protocol setting is turned off. Use COMMAND CENTER and turn on the SMTP protocol setting. Scan to PC (SMB) - SMB setting is turned off. Use COMMAND CENTER and turn on the SMB setting. Scan to PC (FTP) - FTP setting is turned off. Use COMMAND CENTER and turn on the FTP setting. 1106: The sender address setting under E-mail: SMTP is not registered. Use COMMAND CENTER and register the sender address. 2-15 - 3-24 3-25 2-15 2-15 OPERATION GUIDE 6-9