Lenovo Beacon Lenovo Beacon Hardware Maintenance Manual
Lenovo Beacon Manual
View all Lenovo Beacon manuals
Add to My Manuals
Save this manual to your list of manuals |
Lenovo Beacon manual content summary:
- Lenovo Beacon | Lenovo Beacon Hardware Maintenance Manual - Page 1
lenovo Beacon Hardware Maintenance Manual ideaideaideaCentreidea Machine Types: 10165/90AN - Lenovo Beacon | Lenovo Beacon Hardware Maintenance Manual - Page 2
- Lenovo Beacon | Lenovo Beacon Hardware Maintenance Manual - Page 3
lenovo Beacon Hardware Maintenance Manual Machine Types: 10165/90AN - Lenovo Beacon | Lenovo Beacon Hardware Maintenance Manual - Page 4
First Edition (February 2014) © Copyright Lenovo 2014. LIMITED AND RESTRICTED RIGHTS NOTICE: If data or software are delivered pursuant a General Services Administration "GSA" contract, use, reproduction, or disclosure is subject to restrictions set forth in Contract No. GS-35F-05925 - Lenovo Beacon | Lenovo Beacon Hardware Maintenance Manual - Page 5
inspection guide 5 Handling electrostatic discharge-sensitive devices...5 Grounding requirements 6 Safety notices 6 Chapter 3. General information 9 Specifications 9 Chapter 4. General Checkout 11 Chapter 5. Symptom-to-FRU Index 13 Power Supply Problems 13 Undetermined problems 13 Chapter - Lenovo Beacon | Lenovo Beacon Hardware Maintenance Manual - Page 6
iv lenovo Beacon Hardware Maintenance Manual - Lenovo Beacon | Lenovo Beacon Hardware Maintenance Manual - Page 7
manual This manual contains service and reference information for lenovo Beacon computers listed on the cover. It is intended only for trained servicers who are familiar with Lenovo computer products. Before servicing a Lenovo in this manual before following any of the instructions. Veuillez lire - Lenovo Beacon | Lenovo Beacon Hardware Maintenance Manual - Page 8
2 lenovo Beacon Hardware Maintenance Manual - Lenovo Beacon | Lenovo Beacon Hardware Maintenance Manual - Page 9
covers and other parts in a safe place, away from all personnel, while you are servicing the machine. • Keep your tool case away from walk areas so that other people will computer covers, unless instructed otherwise in the installation and configuration procedures. © Copyright Lenovo 2014 3 - Lenovo Beacon | Lenovo Beacon Hardware Maintenance Manual - Page 10
installing instructions service the following parts with the power on when they are removed from their normal operating places in a machine: --Power supply units --Pumps --Blowers and fans --Motor generators and similar units. (This practice ensures correct grounding of the units.) 4 lenovo Beacon - Lenovo Beacon | Lenovo Beacon Hardware Maintenance Manual - Page 11
installed to protect users and service personnel from injury. This guide guide. If any unsafe conditions are present, you must determine how serious the apparent hazard could be and whether you can continue without first correcting the problem Notes: 1. Use product-specific ESD procedures when they - Lenovo Beacon | Lenovo Beacon Hardware Maintenance Manual - Page 12
the specific service requirement. instructed otherwise in the installation and configuration procedures. • Connect and disconnect cables as described in the following table when installing, moving, or opening covers on this product or attached devices. 6 lenovo Beacon Hardware Maintenance Manual - Lenovo Beacon | Lenovo Beacon Hardware Maintenance Manual - Page 13
CD-ROMs, DVD-ROM drives, fiber optic devices, or transmitters) are installed, note the following: • Do not remove the covers. Removing the covers product could result in exposure to hazardous laser radiation. There are no serviceable parts inside the device. • Use of controls or adjustments or - Lenovo Beacon | Lenovo Beacon Hardware Maintenance Manual - Page 14
are disconnected from the power source. 2 1 CAUTION: Do not place any object weighing more than 82 kg (180 lbs.) on top of rack-mounted devices. 8 lenovo Beacon Hardware Maintenance Manual - Lenovo Beacon | Lenovo Beacon Hardware Maintenance Manual - Page 15
computer models covered by this manual. Specifications This section lists the physical specifications for your computer. This section lists the physical specifications for your computer. Type: lenovo Beacon This section lists the physical specifications. Environment Air temperature: Operating: 10 - Lenovo Beacon | Lenovo Beacon Hardware Maintenance Manual - Page 16
10 lenovo Beacon Hardware Maintenance Manual - Lenovo Beacon | Lenovo Beacon Hardware Maintenance Manual - Page 17
to the information supplied with that software package. Use the following procedure to help determine the cause of the problem: 1. Power-off the computer , proceed to step 7. 6. Look at the following conditions and follow the instructions: • If the computer displays a POST error, go to "POST error - Lenovo Beacon | Lenovo Beacon Hardware Maintenance Manual - Page 18
12 lenovo Beacon Hardware Maintenance Manual - Lenovo Beacon | Lenovo Beacon Hardware Maintenance Manual - Page 19
servicing a computer. If you are unable to correct the problem using this index, go to "Undetermined problems". Power Supply Problems If you suspect a power problem, use the following procedures. Check/Verify Check the following for proper installation problems if installed) one to re-test the system - Lenovo Beacon | Lenovo Beacon Hardware Maintenance Manual - Page 20
14 lenovo Beacon Hardware Maintenance Manual - Lenovo Beacon | Lenovo Beacon Hardware Maintenance Manual - Page 21
connectors on your computer. Font view The following illustration shows the location of controls and components on the front of the computer. 1. Power button © Copyright Lenovo 2014 15 - Lenovo Beacon | Lenovo Beacon Hardware Maintenance Manual - Page 22
. Attention: Be sure not to block any air vents on the computer. Blocked air vents may cause overheating. 1. System reset button 3. USB port 5. HDMI-out port 7. Power connector 2. USB copy button 4. USB port 6. Ethernet connector 8. Kingston lock 16 lenovo Beacon Hardware Maintenance Manual - Lenovo Beacon | Lenovo Beacon Hardware Maintenance Manual - Page 23
Back view 1. Hard disk drive indicator 2. Wi-Fi indicator Chapter 6. Locations 17 - Lenovo Beacon | Lenovo Beacon Hardware Maintenance Manual - Page 24
cable - right angle type 10. HDD cable - straight type 11. Rubber foot 12. Bottom metal shield 13. Middle chassis with bracket 14. AC adapter 18 lenovo Beacon Hardware Maintenance Manual - Lenovo Beacon | Lenovo Beacon Hardware Maintenance Manual - Page 25
Middle Assembly Chapter 6. Locations 19 - Lenovo Beacon | Lenovo Beacon Hardware Maintenance Manual - Page 26
install later. 1. System reset button 2. USB copy button 3. USB ports 4. USB ports 5. HDMI-out port 6. Ethernet connector 7. Power connector 8. Hard disk drive SATA connector 9. Mini PCIE connector 10. FAN cable connector 11. Speaker connector 12. Zigbee card connector 20 lenovo Beacon Hardware - Lenovo Beacon | Lenovo Beacon Hardware Maintenance Manual - Page 27
in the Hardware Maintenance Manual (HMM) for the computer. To obtain copies of the Safety and Warranty Guide or HMM, go to the Support Web site at: http://consumersupport.lenovo.com. Note: Use only parts provided by Lenovo. General information Pre-disassembly instructions Before proceeding with the - Lenovo Beacon | Lenovo Beacon Hardware Maintenance Manual - Page 28
helpful to place the computer face-down on a soft flat surface for this procedure. Lenovo recommends that you use a blanket, towel, or other soft cloth to protect the Push the side cover to release lactch from the machine and remove the side cover . 22 lenovo Beacon Hardware Maintenance Manual - Lenovo Beacon | Lenovo Beacon Hardware Maintenance Manual - Page 29
helpful to place the computer face-down on a soft flat surface for this procedure. Lenovo recommends that you use a blanket, towel, or other soft cloth to protect the sides of the hard disk drive bracket to release the Hard disk drive bracket. Step 5. Remove the hard disk drive from the machine - Lenovo Beacon | Lenovo Beacon Hardware Maintenance Manual - Page 30
It may be helpful to place the computer face-down on a soft flat surface for this procedure. Lenovo recommends that you use a blanket, towel, or other soft cloth to protect the computer screen from 5. Remove the top metal shield from the machine. 24 lenovo Beacon Hardware Maintenance Manual - Lenovo Beacon | Lenovo Beacon Hardware Maintenance Manual - Page 31
it cool down before removing the cover. Note: It may be helpful to place the computer face-down on a soft flat surface for this procedure. Lenovo recommends that you use a blanket, towel, or other soft cloth to protect the computer screen from scratches or other damage. To replace the middle frame - Lenovo Beacon | Lenovo Beacon Hardware Maintenance Manual - Page 32
It may be helpful to place the computer face-down on a soft flat surface for this procedure. Lenovo recommends that you use a blanket, towel, or other soft cloth to protect the computer screen from zigbee card antenna cable to the new zigbee card. 26 lenovo Beacon Hardware Maintenance Manual - Lenovo Beacon | Lenovo Beacon Hardware Maintenance Manual - Page 33
to place the computer face-down on a soft flat surface for this procedure. Lenovo recommends that you use a blanket, towel, or other soft cloth to protect the Step 6. Pull the WLAN card upward to remove it from the card port. To install the new Wi-Fi card: Step 7. Line up the new WLAN card, then - Lenovo Beacon | Lenovo Beacon Hardware Maintenance Manual - Page 34
It may be helpful to place the computer face-down on a soft flat surface for this procedure. Lenovo recommends that you use a blanket, towel, or other soft cloth to protect the computer screen from scratches Step 6. Remove the system fan by lifting it up. 28 lenovo Beacon Hardware Maintenance Manual - Lenovo Beacon | Lenovo Beacon Hardware Maintenance Manual - Page 35
place the computer face-down on a soft flat surface for this procedure. Lenovo recommends that you use a blanket, towel, or other soft cloth to protect 6. Pull upward the HDD power cable from the connector on the motherboard. To install the new HDD Cable - right angle type: Step 7. Line up a new HDD - Lenovo Beacon | Lenovo Beacon Hardware Maintenance Manual - Page 36
It may be helpful to place the computer face-down on a soft flat surface for this procedure. Lenovo recommends that you use a blanket, towel, or other soft cloth to protect the computer screen from 5. Remove the bottom metal shield from the machine. 30 lenovo Beacon Hardware Maintenance Manual - Lenovo Beacon | Lenovo Beacon Hardware Maintenance Manual - Page 37
To install the new bottom metal shield: Step 6. Stable a new bottom metal shield on bottom side of the middle bracket. Step 7. Secure the bottom metal shield with the screw. Chapter 7. Replacing hardware 31 - Lenovo Beacon | Lenovo Beacon Hardware Maintenance Manual - Page 38
procedure. Lenovo recommends install the new HDD Cable - straight type: Step 7. Line up a new HDD cable, secure the HDD connector with two screws. Step 8. Connect the HDD SATA cable in the connector. Step 9. Connect the HDD power cable in the connector. 32 lenovo Beacon Hardware Maintenance Manual - Lenovo Beacon | Lenovo Beacon Hardware Maintenance Manual - Page 39
it cool down before removing the cover. Note: It may be helpful to place the computer face-down on a soft flat surface for this procedure. Lenovo recommends that you use a blanket, towel, or other soft cloth to protect the computer screen from scratches or other damage. To replace the motherboard - Lenovo Beacon | Lenovo Beacon Hardware Maintenance Manual - Page 40
To install the new motherboard: Step 15. Place the new motherboard into the chassis, aligning the screw holes in the motherboard with Secure the new motherboard to the chassis using the screw. Step 17. Attach all related components to the new motherboard. 34 lenovo Beacon Hardware Maintenance Manual - Lenovo Beacon | Lenovo Beacon Hardware Maintenance Manual - Page 41
place the computer face-down on a soft flat surface for this procedure. Lenovo recommends that you use a blanket, towel, or other soft cloth to for each side) Step 5. Remove the rubber foot from the middle chassis. To install the new rubber foot: Step 6. Put the rubber foot on the middle chassis - Lenovo Beacon | Lenovo Beacon Hardware Maintenance Manual - Page 42
It may be helpful to place the computer face-down on a soft flat surface for this procedure. Lenovo recommends that you use a blanket, towel, or other soft cloth to protect the computer screen from the system fan. Refer to the "Removing the system fan". 36 lenovo Beacon Hardware Maintenance Manual - Lenovo Beacon | Lenovo Beacon Hardware Maintenance Manual - Page 43
FRU lists This chapter lists the information on the field replaceable units (FRUs). Attention: Be sure to read and understand all the safety information before replacing any FRUs. Notes: FRUs that have a 1 or 2 in the CRU column are Customer Replaceable Units (CRUs). • 1 identifies parts that are - Lenovo Beacon | Lenovo Beacon Hardware Maintenance Manual - Page 44
38 lenovo Beacon Hardware Maintenance Manual - Lenovo Beacon | Lenovo Beacon Hardware Maintenance Manual - Page 45
that the service representative might BIOS mode is ignored. Not all operating systems support ACPI BIOS mode. Automatic Power-On features The Automatic on the computer automatically. • Resume On RTC Alarm: You can specify a date and time at which the computer will be turned on automatically. This can - Lenovo Beacon | Lenovo Beacon Hardware Maintenance Manual - Page 46
40 lenovo Beacon Hardware Maintenance Manual
i
d
e
a
i
d
e
a
i
d
e
a
Centre
i
d
e
a
lenovo Beacon
Hardware Maintenance Manual
Machine Types: 10165/90AN