Lenovo IdeaCentre K210 K210 Guide for Bright Eye Camera

To install Lenovo Bright Eye camera, do the following:

1

2

3

5

4

[J1]

(2)

(1)

S-1

S-2

S-3

S-4

S-5

Installation Guide for Lenovo Bright Eye Camera

(

This camera can also be used as a common camera

)

J1- Four securing latches on the front side of the

camera base

There are four securing latches on the front side

of the camera base. Align the four latches to the

four slots on the top of computer display.

Embed the four securing latches of the camera

base into the four slots, and then push the case

downward until it is locked. After that, the

camera base is secured onto the display.

Move the camera with the camera bracket

into the base along the glide rail of the base

to install the camera.

If the camera is not in use, turn it leftward

or rightward to hide it.

S-1 Lens roller

—— used to adjust the pitch

angle of the lens

S-2 Power LED

—— used to indicate when

the computer is powered on

S-3 Lens of the camera

S-4 Camera bracket

S-5 USB cable

—— used to connect the

camera to the computer

Note:

Press “Push” to move the camera upward

and eject the lens to start the camera.

Press “Push” again to move the camera

downward and hide the lens to shut down

the camera.

31032935

ig t

t

ti

2007

2 27

9 45 03

Lenovo IdeaCentre K210 K210 Guide for Bright Eye Camera

Lenovo IdeaCentre K210 Manual

Lenovo IdeaCentre K210 manual content summary: