Lenovo Storage E1024 (English) CRU Installation and Replacement Guide - Lenovo
Lenovo Storage E1024 Manual
 |
View all Lenovo Storage E1024 manuals
Add to My Manuals
Save this manual to your list of manuals |
Lenovo Storage E1024 manual content summary:
- Lenovo Storage E1024 | (English) CRU Installation and Replacement Guide - Lenovo - Page 1
CRU Installation and Replacement Guide For firmware release GL210 or later Abstract This document describes removal and installation of customer-replaceable units for Lenovo Storage S3200/S2200 controller enclosures, and is intended for use by storage system administrators familiar with servers - Lenovo Storage E1024 | (English) CRU Installation and Replacement Guide - Lenovo - Page 2
RIGHTS NOTICE: If data or software is delivered pursuant a General Services Administration "GSA" contract, use, reproduction, or disclosure is subject to restrictions set forth in Contract No. GS-35F-05925. Lenovo, the Lenovo logo, BladeCenter, Flex System, NeXtScale System, and System x are - Lenovo Storage E1024 | (English) CRU Installation and Replacement Guide - Lenovo - Page 3
controller module or expansion module 23 Before disk drive module 32 Installing a disk drive module 33 Determine if a disk is missing 34 Using the SMC 34 Using the CLI 34 Verifying component operation 34 Replacing a power supply module 34 Lenovo Storage CRU Installation and Replacement Guide - Lenovo Storage E1024 | (English) CRU Installation and Replacement Guide - Lenovo - Page 4
42 Before you begin 42 Verifying component failure 43 Preparing to remove a damaged storage enclosure chassis 43 Removing a damaged storage enclosure chassis from the rack 44 Installing the replacement storage enclosure in the rack 44 Completing the process 45 Verifying component operation 45 - Lenovo Storage E1024 | (English) CRU Installation and Replacement Guide - Lenovo - Page 5
alignment (2U24 15 6 Exploded view - controller or expansion enclosure (2U12 17 7 S3200/S2200 CNC controller module 28 17 Disengaging a disk drive module 32 18 Removing a disk drive module 32 19 Installing a disk drive module 33 20 AC Lenovo Storage CRU Installation and Replacement Guide 5 - Lenovo Storage E1024 | (English) CRU Installation and Replacement Guide - Lenovo - Page 6
systems 11 5 S3200/S2200 product components for 24-drive enclosures 12 6 Compatible drive enclosure options for adding storage 15 7 S3200/S2200 product components for 12-drive enclosures 16 8 Power supply faults and recommended actions 35 9 Power supply unit LED descriptions 38 10 Removing - Lenovo Storage E1024 | (English) CRU Installation and Replacement Guide - Lenovo - Page 7
product models, see the "Components" chapter within the Setup Guide. Lenovo Storage S3200/S2200 enclosures support virtual storage, which uses paged-storage technology. A group of disks with an assigned RAID level is called a disk group. IMPORTANT: Product configuration characteristics • S3200/S2200 - Lenovo Storage E1024 | (English) CRU Installation and Replacement Guide - Lenovo - Page 8
and Notices Guide • Basic Troubleshooting Guide • Rack Safety Information • Safety Information • Safety Labels Overview of product shipkit contents and setup tasks Lenovo Storage S3200/S22200 Getting Started* Multilingual warranty, service, and support information Lenovo Warranty* and - Lenovo Storage E1024 | (English) CRU Installation and Replacement Guide - Lenovo - Page 9
Indicates that failure to follow directions could result in damage to equipment or data. IMPORTANT: Provides clarifying information or specific instructions. NOTE: Provides additional information. TIP: Provides helpful hints and shortcuts. Lenovo Storage CRU Installation and Replacement Guide 9 - Lenovo Storage E1024 | (English) CRU Installation and Replacement Guide - Lenovo - Page 10
expansion module terms are used to provide clarity. NOTE: See the Lenovo Storage CLI Reference Guide for more information. You can also determine which CRUs pertain to your storage enclosure by visual inspection of the component, noting serial number and part number. This method applies to disk - Lenovo Storage E1024 | (English) CRU Installation and Replacement Guide - Lenovo - Page 11
supported S2200 CNC and SAS configurations. Table 4 Individual enclosure models comprising S2200 storage systems Lenovo Storage S2200 controller enclosure matrix 2.5" 24-drive Controller enclosures (SFF 12-drive enclosures, respectively. Lenovo Storage CRU Installation and Replacement Guide 11 - Lenovo Storage E1024 | (English) CRU Installation and Replacement Guide - Lenovo - Page 12
enclosures and optional expansion enclosures. Table 5 S3200/S2200 product components for 24-drive enclosures Item 1 2 3 4 5 6 7 Not shown Not shown Not shown Enclosure component descriptions Disk drive (SFF) a) 2.5" disk drive module (disks of differing type/speed and storage capacity: SAS, SSD - Lenovo Storage E1024 | (English) CRU Installation and Replacement Guide - Lenovo - Page 13
4 illustrate 24-drive enclosure models. Figure 2 shows a newer S2200/S3200 controller module supported by the enclosure. The enclosure bezel is shown in Figure 3 on page 14 (installed) and in Figure 5 on page 15 (removed), respectively. Lenovo Storage CRU Installation and Replacement Guide 13 - Lenovo Storage E1024 | (English) CRU Installation and Replacement Guide - Lenovo - Page 14
shown exploded from the IOM in the CNC example. Controller modules equipped with CNC ports support qualified FC (8 Gbit/s, 16 Gbit/s), 10GbE iSCSI, and 1 Gb RJ-45 SFF-8644 external connectors. Figure 3 Controller enclosure assembly with bezel installed (2U24) Power supply unit I/O module Disk - Lenovo Storage E1024 | (English) CRU Installation and Replacement Guide - Lenovo - Page 15
with CRUs Disk drives 2.5" (SFF) 3.5" (LFF) Rear panel connection mini-SAS to mini-SAS mini-SAS to mini-SAS NEBS Note 3 Note 3 1These S3200/S2200-compatible expansion enclosure models feature 6 Gbit/s internal disk and SAS expander link speeds. 3See the Lenovo Storage S3200/S2200 Setup Guide for - Lenovo Storage E1024 | (English) CRU Installation and Replacement Guide - Lenovo - Page 16
enclosures and optional expansion enclosures. Table 7 S3200/S2200 product components for 12-drive enclosures Item 1 2 3 4 5 6 7 Not shown Not shown Not shown Enclosure component descriptions Disk drive (LFF) a) 3.5" disk drive module (disks of differing type/speed and storage capacity: SAS - Lenovo Storage E1024 | (English) CRU Installation and Replacement Guide - Lenovo - Page 17
6 4 5 2a 3 2b 1 Figure 6 Exploded view - controller or expansion enclosure (2U12) Figure 6 through Figure 9 illustrate 12-drive enclosure models. Figure relative to Figure 6) Figure 7 S3200/S2200 CNC controller module with SFP transceiver Lenovo Storage CRU Installation and Replacement Guide 17 - Lenovo Storage E1024 | (English) CRU Installation and Replacement Guide - Lenovo - Page 18
SFF-8644 external connectors. Figure 8 Enclosure assembly with bezel installed (2U12) Power supply unit Disk drive module Midplane I/O module Figure 9 Enclosure architecture - internal components sub-assembly (2U12) Enclosure bezel for 12-drive model The LFF 12-drive enclosure supports - Lenovo Storage E1024 | (English) CRU Installation and Replacement Guide - Lenovo - Page 19
instructions are provided beneath Attaching and removing the enclosure bezel on page 22. IMPORTANT: For information about compatible drive enclosures supported by S3200/S2200 12-drive controller enclosures using the 2U12 chassis, see Supported drive enclosures S3200/S2200 on page 15. Lenovo Storage - Lenovo Storage E1024 | (English) CRU Installation and Replacement Guide - Lenovo - Page 20
precautions, removal instructions, installation instructions, and verification floor mats. • Use conductive field service tools. • Use a portable field service kit with a folding static-dissipating work support.lenovo.com, select Product Support, and navigate to Storage Products. 20 Procedures - Lenovo Storage E1024 | (English) CRU Installation and Replacement Guide - Lenovo - Page 21
is also supported. TIP: Many procedures refer to component LEDs and LED statuses. See the Lenovo Storage S3200/S2200 Setup Guide for descriptions of model-specific front panel and rear panel LEDs. TIP: Within the Lenovo Storage S3200/S2200 Setup Guide, see "Troubleshooting > Fault isolation - Lenovo Storage E1024 | (English) CRU Installation and Replacement Guide - Lenovo - Page 22
align its back side with the front face of the enclosure as shown in the figures above. 2. Face the front of the enclosure, and while supporting the base of the bezel, position it such that the mounting sleeves within the integrated ear caps align with the ball studs. 3. Gently push-fit - Lenovo Storage E1024 | (English) CRU Installation and Replacement Guide - Lenovo - Page 23
controller. Disable partner firmware update only if requested by a service technician. Use the SMC or the CLI to change the PFU setting. Using the SMC IMPORTANT: See the "Updating firmware" topic within the Lenovo Storage Manager Guide before performing a firmware update. To change the PFU setting - Lenovo Storage E1024 | (English) CRU Installation and Replacement Guide - Lenovo - Page 24
NOTE: See the Lenovo Storage CLI Reference Guide for additional information. Service Required LED (back of enclosure): Amber = Fault condition • Check that the CRU OK LED (back of enclosure) is off Stopping I/O When troubleshooting disk drive and connectivity faults, stop I/O to the affected disk - Lenovo Storage E1024 | (English) CRU Installation and Replacement Guide - Lenovo - Page 25
is not zero, a host is still reading from or writing to this disk group. Continue to stop I/O from hosts, and repeat step 1and step 2 until the difference in step 3 is zero. NOTE: See the Lenovo Storage CLI Reference Guide for additional information. Optionally, you can use the SMC to monitor IOPs - Lenovo Storage E1024 | (English) CRU Installation and Replacement Guide - Lenovo - Page 26
on NOTE: See the Lenovo Storage CLI Reference Guide for additional information. Removing a controller module or expansion module IMPORTANT: • In environment-if replacing both controller modules-you must adhere to the instructions provided in Before you begin on page 23. See CAUTION bullets - Lenovo Storage E1024 | (English) CRU Installation and Replacement Guide - Lenovo - Page 27
the controller module straight out of the enclosure such that the controller module remains level during removal (see Figure 15). Figure 15 Removing a controller module Lenovo Storage CRU Installation and Replacement Guide 27 - Lenovo Storage E1024 | (English) CRU Installation and Replacement Guide - Lenovo - Page 28
Installing a controller module or expansion module TIP: You can install a controller module into thumbscrews clockwise until finger-tight. 4. Reconnect the cables. NOTE: See the Lenovo Storage S3200/S2200 Setup Guide for cabling information. 2 Figure 16 Inserting a controller module 2 1 IMPORTANT - Lenovo Storage E1024 | (English) CRU Installation and Replacement Guide - Lenovo - Page 29
enclosure 0 off If the Fault/Service Required LED is amber, the controller Lenovo Storage S3200/S2200 Setup Guide for descriptions of model-specific LEDs. Updating firmware You can view the current versions of firmware in controller modules, expansion modules (in optional drive enclosures), and disks - Lenovo Storage E1024 | (English) CRU Installation and Replacement Guide - Lenovo - Page 30
more information. IMPORTANT: See the "Updating firmware" topic within the Lenovo Storage Manager Guide before performing a firmware update. Replacing a disk drive module A disk drive module consists of a disk in a sled. Disk drive modules are hot-swappable, which means they can be replaced without - Lenovo Storage E1024 | (English) CRU Installation and Replacement Guide - Lenovo - Page 31
of the disks must be FDE-capable. • If you install a disk module that does not support FDE into a secure system, the disk will have Lenovo Storage S3200/S2200 Setup Guide for a description of LEDs and disk drive slot numbering for your enclosure). You can determine from visual inspection which disk - Lenovo Storage E1024 | (English) CRU Installation and Replacement Guide - Lenovo - Page 32
to move its position inside the chassis, partially ejecting the disk from its installed position within the disk drive slot. SFF 2.5" disk or blank LFF 3.5" disk or blank Figure 17 Disengaging a disk drive module 2. Wait 20 seconds for the internal disks to stop spinning. 3. Follow one of the two - Lenovo Storage E1024 | (English) CRU Installation and Replacement Guide - Lenovo - Page 33
If the health is not OK, then hover over the disk to display details about it, such as Status and Health Recommendations. Using the CLI: 7. Log in to the CLI. 8. To view information about disks, run the following command: show disks Lenovo Storage CRU Installation and Replacement Guide 33 - Lenovo Storage E1024 | (English) CRU Installation and Replacement Guide - Lenovo - Page 34
on the front face of the disk drive escutcheon-is illuminated green. On LFF disks, this is the bottom LED. On SFF disks, this is the left LED. Both sets of LEDs are shown in Figure 19 on page 33. TIP: See the Lenovo Storage S3200/S2200 Setup Guide for descriptions of disk drive LEDs and other front - Lenovo Storage E1024 | (English) CRU Installation and Replacement Guide - Lenovo - Page 35
on page 35 also references a CLI command. Table 8 Power supply faults and recommended actions Problem Power supply fan warning or failure, or power supply warning or failure Event code 551 or interfaces on page 46 for more information). Lenovo Storage CRU Installation and Replacement Guide 35 - Lenovo Storage E1024 | (English) CRU Installation and Replacement Guide - Lenovo - Page 36
Power supply units S3200/S2200 enclosures feature two redundant AC power supplies. IMPORTANT: AC power supply units do not have power switches. These PSUs power on when connected to a power source, and power off when disconnected. AC PSU Enclosures configured with AC PSUs that do not have a power - Lenovo Storage E1024 | (English) CRU Installation and Replacement Guide - Lenovo - Page 37
connector. See Figure 21 below. Controller or expansion enclosure (cover plates are shown in lieu of to pull the module straight out of the chassis slot, taking care to support the base of the PSU-with both hands-as you remove it from the Lenovo Storage CRU Installation and Replacement Guide 37 - Lenovo Storage E1024 | (English) CRU Installation and Replacement Guide - Lenovo - Page 38
for the disks to spin /Fan Fault/Service Required LED is Lenovo Storage S3200/S2200 models can use Converged Network Controller (CNC) technology, allowing you to select the desired host interface protocol from available Fibre Channel (FC) or Internet SCSI (iSCSI) host interface protocols supported - Lenovo Storage E1024 | (English) CRU Installation and Replacement Guide - Lenovo - Page 39
SFP connectors and cables required for supporting the selected host interface protocol. IMPORTANT: To change the host port mode for CNC ports, follow the "Change the host port mode" instructions provided in the Lenovo Storage S3200/S2200 Setup Guide. Replacing a Fibre Channel transceiver This - Lenovo Storage E1024 | (English) CRU Installation and Replacement Guide - Lenovo - Page 40
higher port speed. Rebooting the RAID canister or the host resolves the problem. 1. Disconnect the fibre-optic interface cable by squeezing the end • See the "Changing host-interface settings" topic in the Storage Manager Guide for information about configuring CNC ports for use with qualified FC - Lenovo Storage E1024 | (English) CRU Installation and Replacement Guide - Lenovo - Page 41
developed by the Small Form Factor (SFF) Committee. Removing and replacing an SFP to the preceding Replacing a Fibre Channel transceiver instructions. When reviewing the procedure as it pertains Guide for an illustration showing a 10GbE SFP+ installed within the IOM. Lenovo Storage CRU - Lenovo Storage E1024 | (English) CRU Installation and Replacement Guide - Lenovo - Page 42
Guide for an illustration showing a 1 Gb RJ-45 SFP installed within the RAID canister. Replacing a storage enclosure chassis The controller enclosure or expansion enclosure chassis replacement procedure replaces a damaged chassis CRU, which consists of the structural support • All disk drive modules - Lenovo Storage E1024 | (English) CRU Installation and Replacement Guide - Lenovo - Page 43
module or expansion module on page 28 7. Install the replacement storage chassis in the rack. Installing the replacement storage enclosure in the rack on page 44. 8. Install the disk drive modules in the replacement chassis.1 Installing a disk drive module on page 33. Lenovo Storage CRU - Lenovo Storage E1024 | (English) CRU Installation and Replacement Guide - Lenovo - Page 44
with the other components for future use. Installing the replacement storage enclosure in the rack This section provides a procedure for Removing a disk drive module on page 32 and FDE considerations on page 30. NOTE: Refer to Rackmount Bracket Kit Installation instructions used with your - Lenovo Storage E1024 | (English) CRU Installation and Replacement Guide - Lenovo - Page 45
replacement enclosure chassis. 2. Support the bottom of the a fresh discovery of all expansion enclosures connected to the controller Disk Channels. c. Click Rescan. Using LEDs View LEDs on the front and rear of the enclosure (see "LED descriptions" within the Lenovo Storage S3200/S2200 Setup Guide - Lenovo Storage E1024 | (English) CRU Installation and Replacement Guide - Lenovo - Page 46
disk LEDs. Attach the bezel when finished viewing disk LEDs. • For SFF disks, verify that the Power/Activity LED (left LED on front of disk) is illuminated green or blinking green. Remove the enclosure bezel to view disk Started" within the Lenovo Storage Manager Guide for more information). Select - Lenovo Storage E1024 | (English) CRU Installation and Replacement Guide - Lenovo - Page 47
17 2U24 13 internal components sub-assembly 2U12 18 2U24 14 D disk drives LFF 16 SFF 12 document conventions 9 prerequisite knowledge 7 related documentation 8 E SFP 42 replacing a 10GbE SFP+ 41 replacing a controller or expansion module 23 Lenovo Storage CRU Installation and Replacement Guide 47 - Lenovo Storage E1024 | (English) CRU Installation and Replacement Guide - Lenovo - Page 48
replacing a disk drive module 30 replacing a Fibre Channel SFP 39 replacing a PSU 34 replacing a storage enclosure chassis 42 components (common) 42 components (model-specific) 42 damaged chassis removal 44 replacement chassis installation 44 R related documentation 8 S S2200 products enclosures (
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
 |
 |
Lenovo Storage
CRU Installation and Replacement Guide
For firmware release GL210 or later
Part Number: 00WE608
Abstract
This document describes removal and installation of customer-replaceable units for Lenovo Storage S3200/S2200 controller
enclosures, and is intended for use by storage system administrators familiar with servers and computer networks, network
administration, storage system installation and configuration, storage area network management, and relevant protocols.