Lenovo Storage S2200 (English) CRU Installation and Replacement Guide - Lenovo
Lenovo Storage S2200 Manual
 |
View all Lenovo Storage S2200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Lenovo Storage S2200 manual content summary:
- Lenovo Storage S2200 | (English) CRU Installation and Replacement Guide - Lenovo - Page 1
replaceable units for Lenovo Storage S3200/S2200 controller enclosures, and is intended for use by storage system administrators familiar with servers and computer networks, network administration, storage system installation and configuration, storage area network management, and relevant protocols - Lenovo Storage S2200 | (English) CRU Installation and Replacement Guide - Lenovo - Page 2
RIGHTS NOTICE: If data or software is delivered pursuant a General Services Administration "GSA" contract, use, reproduction, or disclosure is subject to restrictions set forth in Contract No. GS-35F-05925. Lenovo, the Lenovo logo, BladeCenter, Flex System, NeXtScale System, and System x are - Lenovo Storage S2200 | (English) CRU Installation and Replacement Guide - Lenovo - Page 3
guide 7 Overview 7 Lenovo Storage S3200/S2200 enclosure user interfaces 7 Intended audience 7 Prerequisites 7 Related documentation 8 Document conventions and symbols 9 1 CRUs 10 Available CRUs 10 Storage enclosure overview S3200 10 Storage enclosure overview S2200 23 Configuring partner - Lenovo Storage S2200 | (English) CRU Installation and Replacement Guide - Lenovo - Page 4
a 1Gb RJ-45 SFP transceiver 42 Replacing a storage enclosure chassis 42 Before you begin 42 Verifying component failure 43 Preparing to a damaged storage enclosure chassis 43 Removing a damaged storage enclosure chassis from the rack 44 Installing the replacement storage enclosure in - Lenovo Storage S2200 | (English) CRU Installation and Replacement Guide - Lenovo - Page 5
alignment (2U24 15 6 Exploded view - controller or expansion enclosure (2U12 17 7 S3200/S2200 CNC controller module with SFP transceiver 17 8 Enclosure assembly with bezel installed (2U12 18 40 26 Install the SFP into the CNC port 41 Lenovo Storage CRU Installation and Replacement Guide 5 - Lenovo Storage S2200 | (English) CRU Installation and Replacement Guide - Lenovo - Page 6
3 Individual enclosure models comprising S3200 storage systems 10 4 Individual enclosure models comprising S2200 storage systems 11 5 S3200/S2200 product components for 24-drive enclosures 12 6 Compatible drive enclosure options for adding storage 15 7 S3200/S2200 product components for 12-drive - Lenovo Storage S2200 | (English) CRU Installation and Replacement Guide - Lenovo - Page 7
enclosure. Lenovo Storage S3200/S2200 enclosure user interfaces The S3200/S2200 enclosures support a web-based application for configuring, monitoring, and managing the storage system. The web-based application GUI, and the command-line interface are briefly described: • Storage Management Console - Lenovo Storage S2200 | (English) CRU Installation and Replacement Guide - Lenovo - Page 8
hardware setup and related troubleshooting Lenovo Storage S3200/S2200 Setup Guide Using the web interface to configure and manage the Lenovo Storage Manager Guide product Using the command-line interface (CLI) to configure and manage the product Lenovo Storage CLI Reference Guide Event codes and - Lenovo Storage S2200 | (English) CRU Installation and Replacement Guide - Lenovo - Page 9
Indicates that failure to follow directions could result in damage to equipment or data. IMPORTANT: Provides clarifying information or specific instructions. NOTE: Provides additional information. TIP: Provides helpful hints and shortcuts. Lenovo Storage CRU Installation and Replacement Guide 9 - Lenovo Storage S2200 | (English) CRU Installation and Replacement Guide - Lenovo - Page 10
by supported S3200 CNC and SAS configurations. Table 3 Individual enclosure models comprising S3200 storage systems Lenovo Storage S3200 controller enclosure matrix 2.5" 24-drive Controller enclosures (SFF) 3.5" 12-drive Controller enclosures (LFF) Model S3200 S3200 S3200 S3200 Description - Lenovo Storage S2200 | (English) CRU Installation and Replacement Guide - Lenovo - Page 11
by supported S2200 CNC and SAS configurations. Table 4 Individual enclosure models comprising S2200 storage systems Lenovo Storage S2200 controller enclosure matrix 2.5" 24-drive Controller enclosures (SFF) 3.5" 12-drive Controller enclosures (LFF) Model S2200 S2200 S2200 S2200 Description - Lenovo Storage S2200 | (English) CRU Installation and Replacement Guide - Lenovo - Page 12
enclosures. Table 5 S3200/S2200 product components for 24-drive enclosures Item 1 2 3 4 5 6 7 Not shown Not shown Not shown Enclosure component descriptions Disk drive (SFF) a) 2.5" disk drive module (disks of differing type/speed and storage capacity: SAS, SSD) b) Air management module (blank to - Lenovo Storage S2200 | (English) CRU Installation and Replacement Guide - Lenovo - Page 13
4 illustrate 24-drive enclosure models. Figure 2 shows a newer S2200/S3200 controller module supported by the enclosure. The enclosure bezel is shown in Figure 3 on page 14 (installed) and in Figure 5 on page 15 (removed), respectively. Lenovo Storage CRU Installation and Replacement Guide 13 - Lenovo Storage S2200 | (English) CRU Installation and Replacement Guide - Lenovo - Page 14
module with SFP transceiver The controller module shown in Figure 2 is used in S3200 and S2200 enclosures. The SFP transceiver is shown exploded from the IOM in the CNC example. Controller modules equipped with CNC ports support qualified FC (8 Gbit/s, 16 Gbit/s), 10GbE iSCSI, and 1 Gb RJ-45 SFP - Lenovo Storage S2200 | (English) CRU Installation and Replacement Guide - Lenovo - Page 15
Disk drives 2.5" (SFF) 3.5" (LFF) Rear panel connection mini-SAS to mini-SAS mini-SAS to mini-SAS NEBS Note 3 Note 3 1These S3200/S2200-compatible expansion enclosure models feature 6 Gbit/s internal disk and SAS expander link speeds. 3See the Lenovo Storage S3200/S2200 Setup Guide for maximum - Lenovo Storage S2200 | (English) CRU Installation and Replacement Guide - Lenovo - Page 16
enclosures. Table 7 S3200/S2200 product components for 12-drive enclosures Item 1 2 3 4 5 6 7 Not shown Not shown Not shown Enclosure component descriptions Disk drive (LFF) a) 3.5" disk drive module (disks of differing type/speed and storage capacity: SAS) b) Air management module (blank to - Lenovo Storage S2200 | (English) CRU Installation and Replacement Guide - Lenovo - Page 17
8 on page 18 and Figure 10 on page 18 • Internal components sub-assembly - Figure 9 on page 18 CNC controller module (enlarged relative to Figure 6) Figure 7 S3200/S2200 CNC controller module with SFP transceiver Lenovo Storage CRU Installation and Replacement Guide 17 - Lenovo Storage S2200 | (English) CRU Installation and Replacement Guide - Lenovo - Page 18
The controller module shown in Figure 7 is used in S3200 and S2200 enclosures. The SFP transceiver is shown exploded from the IOM in the CNC example. Controller modules equipped with CNC ports support qualified FC (8 Gbit/s, 16 Gbit/s), 10GbE iSCSI, and 1 Gb RJ-45 SFP options. Controller modules - Lenovo Storage S2200 | (English) CRU Installation and Replacement Guide - Lenovo - Page 19
instructions are provided beneath Attaching and removing the enclosure bezel on page 22. IMPORTANT: For information about compatible drive enclosures supported by S3200/S2200 12-drive controller enclosures using the 2U12 chassis, see Supported drive enclosures S3200/S2200 on page 15. Lenovo Storage - Lenovo Storage S2200 | (English) CRU Installation and Replacement Guide - Lenovo - Page 20
instructions, installation instructions Procedures pertain to CRUs used in S3200/S2200 (2U24 and 2U12) products. • Use conductive field service tools. • Use a portable field service kit with a folding support.lenovo.com, select Product Support, and navigate to Storage Products. 20 Procedures - Lenovo Storage S2200 | (English) CRU Installation and Replacement Guide - Lenovo - Page 21
and air management modules See supported. TIP: Many procedures refer to component LEDs and LED statuses. See the Lenovo Storage S3200/S2200 Setup Guide for descriptions of model-specific front panel and rear panel LEDs. TIP: Within the Lenovo Storage S3200/S2200 Setup Guide, see "Troubleshooting - Lenovo Storage S2200 | (English) CRU Installation and Replacement Guide - Lenovo - Page 22
align its back side with the front face of the enclosure as shown in the figures above. 2. Face the front of the enclosure, and while supporting the base of the bezel, position it such that the mounting sleeves within the integrated ear caps align with the ball studs. 3. Gently push-fit - Lenovo Storage S2200 | (English) CRU Installation and Replacement Guide - Lenovo - Page 23
Replace the partner controller as described in these instructions. Configuring partner firmware update In a dual-controller system service technician. Use the SMC or the CLI to change the PFU setting. Using the SMC IMPORTANT: See the "Updating firmware" topic within the Lenovo Storage Manager Guide - Lenovo Storage S2200 | (English) CRU Installation and Replacement Guide - Lenovo - Page 24
NOTE: See the Lenovo Storage CLI Reference Guide for additional information. problem. • Monitor event notification - With event notification configured and enabled, use the SMC to view the event log, or use the CLI to run the show events detail command to see details for events. • Check Fault/Service - Lenovo Storage S2200 | (English) CRU Installation and Replacement Guide - Lenovo - Page 25
2 until the difference in step 3 is zero. NOTE: See the Lenovo Storage CLI Reference Guide for additional information. Optionally, you can use the SMC to monitor IOPs and target. NOTE: See the Lenovo Storage Manager Guide for additional information. Lenovo Storage CRU Installation and Replacement - Lenovo Storage S2200 | (English) CRU Installation and Replacement Guide - Lenovo - Page 26
controller environment-if replacing both controller modules-you must adhere to the instructions provided in Before you begin on page 23. See CAUTION bullets S3200/S2200 controller module models. For illustrations of model-specific controller face plates, see the Lenovo Storage S3200/S2200 Setup Guide - Lenovo Storage S2200 | (English) CRU Installation and Replacement Guide - Lenovo - Page 27
the controller module straight out of the enclosure such that the controller module remains level during removal (see Figure 15). Figure 15 Removing a controller module Lenovo Storage CRU Installation and Replacement Guide 27 - Lenovo Storage S2200 | (English) CRU Installation and Replacement Guide - Lenovo - Page 28
to engage the controller module (2); turn the thumbscrews clockwise until finger-tight. 4. Reconnect the cables. NOTE: See the Lenovo Storage S3200/S2200 Setup Guide for cabling information. 2 Figure 16 Inserting a controller module 2 1 IMPORTANT: In a dual-controller system in which PFU is - Lenovo Storage S2200 | (English) CRU Installation and Replacement Guide - Lenovo - Page 29
Fault/Service Required Management Controller (A or B), run the following command: restart mc a or restart mc b or restart mc both To restart the Storage Controller (A or B), run the following command: restart sc a or restart sc b or restart sc both TIP: See the Lenovo Storage S3200/S2200 Setup Guide - Lenovo Storage S2200 | (English) CRU Installation and Replacement Guide - Lenovo - Page 30
See the Storage Manager Guide for more information. IMPORTANT: See the "Updating firmware" topic within the Lenovo Storage Manager Guide before performing drive modules, follow the same procedures for installing disks that do not support FDE. The exception occurs when you move FDE-capable disk drive - Lenovo Storage S2200 | (English) CRU Installation and Replacement Guide - Lenovo - Page 31
• If you install a disk module that does not support FDE into a secure system, the disk will have the leave the faulty module in place, or insert an air management module in its place. The blank is installed using solid amber (see the Lenovo Storage S3200/S2200 Setup Guide for a description of LEDs - Lenovo Storage S2200 | (English) CRU Installation and Replacement Guide - Lenovo - Page 32
disk component health using management interfaces to verify component failure or component operation (see Using management interfaces on page 46 the disk from its installed position within the disk drive slot. SFF 2.5" disk or blank LFF 3.5" disk or blank Figure 17 Disengaging a disk drive module - Lenovo Storage S2200 | (English) CRU Installation and Replacement Guide - Lenovo - Page 33
slot as far as it will go (see right illustration in Figure 19). Insert SFF disk or blank Insert LFF disk or blank Figure 19 Installing a disk drive module 3. Follow one of the two disks, run the following command: show disks Lenovo Storage CRU Installation and Replacement Guide 33 - Lenovo Storage S2200 | (English) CRU Installation and Replacement Guide - Lenovo - Page 34
whether a disk is missing by using management interfaces. Using the SMC To determine by location. Review the information, LFF disks, this is the bottom LED. On SFF disks, this is the left LED. Both sets of LEDs are shown in Figure 19 on page 33. TIP: See the Lenovo Storage S3200/S2200 Setup Guide - Lenovo Storage S2200 | (English) CRU Installation and Replacement Guide - Lenovo - Page 35
Table 8 Power supply faults and recommended actions Problem Power supply fan warning or failure, or power management interfaces to verify component failure or component operation (see Using management interfaces on page 46 for more information). Lenovo Storage CRU Installation and Replacement Guide - Lenovo Storage S2200 | (English) CRU Installation and Replacement Guide - Lenovo - Page 36
S3200/S2200 enclosures feature two redundant AC power supplies. IMPORTANT: AC power supply units do not have power switches. These PSUs power on when connected to a power source, and power off when disconnected. AC PSU Enclosures configured both PSUs. 2. Use management software to shut down any - Lenovo Storage S2200 | (English) CRU Installation and Replacement Guide - Lenovo - Page 37
supply unit 6. Use the latch to pull the module straight out of the chassis slot, taking care to support the base of the PSU-with both hands-as you remove it from the enclosure. 7. If replacing two power supply slot as far as it will go. Lenovo Storage CRU Installation and Replacement Guide 37 - Lenovo Storage S2200 | (English) CRU Installation and Replacement Guide - Lenovo - Page 38
/Service management interfaces on page 46 as an alternative to physically observing LEDs to verify component operation. Transceivers used in CNC ports Lenovo Storage S3200/S2200 S3200 models you can use the CLI to set CNC ports to support a combination of host interface protocols. When configuring - Lenovo Storage S2200 | (English) CRU Installation and Replacement Guide - Lenovo - Page 39
SFP connectors and cables required for supporting the selected host interface protocol. IMPORTANT: To change the host port mode for CNC ports, follow the "Change the host port mode" instructions provided in the Lenovo Storage S3200/S2200 Setup Guide. Replacing a Fibre Channel transceiver This - Lenovo Storage S2200 | (English) CRU Installation and Replacement Guide - Lenovo - Page 40
resolves the problem. 1. Disconnect S3200 models only), locate the appropriate SFP pertaining to each target CNC port, and note the port number (0-3) into which each SFP will install. • See the "Changing host-interface settings" topic in the Storage Manager Guide for information about configuring - Lenovo Storage S2200 | (English) CRU Installation and Replacement Guide - Lenovo - Page 41
operation on page 41. NOTE: See the "S3200 CNC controller module - rear panel components" and "S2200 CNC controller module - rear panel components" topics within the Setup Guide for an illustration showing a 10GbE SFP+ installed within the IOM. Lenovo Storage CRU Installation and Replacement - Lenovo Storage S2200 | (English) CRU Installation and Replacement Guide - Lenovo - Page 42
of the structural support metal, the exterior sheet metal housing, and the assembled/installed midplane. The procedure includes removing all CRU components from a damaged chassis and installing them into a replacement chassis. IMPORTANT: Lenovo Storage S3200/S2200 storage enclosures using 2U24 - Lenovo Storage S2200 | (English) CRU Installation and Replacement Guide - Lenovo - Page 43
page 28 7. Install the replacement storage chassis in the rack. Installing the replacement storage enclosure in the rack on page 44. 8. Install the disk drive modules in the replacement chassis.1 Installing a disk drive module on page 33. Lenovo Storage CRU Installation and Replacement Guide 43 - Lenovo Storage S2200 | (English) CRU Installation and Replacement Guide - Lenovo - Page 44
SAN devices. • Between the controller and the host. Label the cables to return to the original cabling configuration components for future use. Installing the replacement storage enclosure in the rack This section provides instructions used with your product for the correct procedure and - Lenovo Storage S2200 | (English) CRU Installation and Replacement Guide - Lenovo - Page 45
the replacement enclosure chassis. 2. Support the bottom of the enclosure chassis configuration: • Between cascaded enclosures. • Between the controller and peripheral or SAN (see "LED descriptions" within the Lenovo Storage S3200/S2200 Setup Guide for more information). Verify front panel LEDs - Lenovo Storage S2200 | (English) CRU Installation and Replacement Guide - Lenovo - Page 46
illuminated green, and that the Fault/Service Required LED is off (all three LEDs are located on the right ear). • For LFF disks, verify that the Power/Activity configured and provisioned the system, and enabled event notification (see "Getting Started" within the Lenovo Storage Manager Guide for - Lenovo Storage S2200 | (English) CRU Installation and Replacement Guide - Lenovo - Page 47
Gb FC 7 conventions document 9 CRUs available for S3200/S2200 10 12-drive enclosure 16 24-drive enclosure 12 disk drives LFF 16 SFF 12 document supply unit (PSU) AC 38 M management interfaces Command-line interface 46 monitor event Lenovo Storage CRU Installation and Replacement Guide 47 - Lenovo Storage S2200 | (English) CRU Installation and Replacement Guide - Lenovo - Page 48
a PSU 34 replacing a storage enclosure chassis 42 components (common) 42 components (model-specific) 42 damaged chassis removal 44 replacement chassis installation 44 R related documentation 8 S S2200 products enclosures (2U12/2U24) 7 product overview table 11 S3200 products enclosures (2U12/2U24
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
 |
 |
Lenovo Storage
CRU Installation and Replacement Guide
For firmware release GL210 or later
Part Number: 00WE608
Abstract
This document describes removal and installation of customer-replaceable units for Lenovo Storage S3200/S2200 controller
enclosures, and is intended for use by storage system administrators familiar with servers and computer networks, network
administration, storage system installation and configuration, storage area network management, and relevant protocols.