Lenovo ThinkServer TD200x User Guide

Lenovo ThinkServer TD200x Manual

Get Lenovo ThinkServer TD200x PDF manuals and user guides View all Lenovo ThinkServer TD200x manuals
Add to My Manuals
Save this manual to your list of manuals

Lenovo ThinkServer TD200x manual content summary:

  • Lenovo ThinkServer TD200x | User Guide - Page 1
    Integrated Management Module User Guide
  • Lenovo ThinkServer TD200x | User Guide - Page 2
  • Lenovo ThinkServer TD200x | User Guide - Page 3
    Integrated Management Module User Guide
  • Lenovo ThinkServer TD200x | User Guide - Page 4
    and the product it supports, read the general information in Appendix B, "Notices," on page 99. First Edition (July 2009) © Copyright Lenovo 2009. Portions © Copyright International Business Machines Corporation 2009. LENOVO products, data, computer software, and services have been developed
  • Lenovo ThinkServer TD200x | User Guide - Page 5
    mouse support 62 Remote power control 64 Viewing performance statistics 64 Starting Remote Desktop Protocol 64 Remote disk 64 Setting up PXE network boot 66 Updating firmware 67 Resetting the IMM with the Setup Utility . . . . 67 Managing tools and utilities with IMM and the server firmware
  • Lenovo ThinkServer TD200x | User Guide - Page 6
    93 update command 93 Appendix A. Getting help and technical assistance 95 Before you call 95 Using the documentation 95 Getting help and information from the World Wide Web 96 Calling for service 96 Using other services 97 Purchasing additional services 97 Lenovo product service 97
  • Lenovo ThinkServer TD200x | User Guide - Page 7
    for ThinkServer servers. This document does not contain explanations of errors or messages. IMM errors and messages are described in the Hardware Maintenance Manual that came with your server. If firmware and documentation updates are available, you can download them from the Lenovo Support Web
  • Lenovo ThinkServer TD200x | User Guide - Page 8
    the Family list, select the name of your server, and click Continue. 5. Click Downloads and drivers to download firmware and driver updates. To check for documentation updates, complete the following steps: 1. Go to http://www.lenovo.com/support. 2. Enter your product number (machine type and model
  • Lenovo ThinkServer TD200x | User Guide - Page 9
    of a diskette drive, CD/DVD drive, USB flash drive, or disk image to a server Note: The following features of the Remote Supervisor Adapter II are not in the IMM: v Display of server MAC addresses v Multiple NTP server entries v Dynamic DNS support Upgrading from IMM Standard to IMM Premium If your
  • Lenovo ThinkServer TD200x | User Guide - Page 10
    in ThinkServer servers Description a server and an Update capabilities Each server requires a unique update servers. BIOS and diagnostic tools can be updated in-band. The IMM firmware, server firmware, and Dynamic System Analysis (DSA) firmware can be updated the server is . The display of screen
  • Lenovo ThinkServer TD200x | User Guide - Page 11
    the Hardware Maintenance Manual that is available on the Lenovo Support Web site at http:// www.lenovo.com/support. Monitoring The BMC with Remote Supervisor Adapter II has the following monitoring capabilities: v Monitoring of server and battery voltage, server temperature, fans, power supplies
  • Lenovo ThinkServer TD200x | User Guide - Page 12
    in ThinkServer servers ( 75 is supported Hz, is supported v Data encryption v USB 2.0 support for USB flash drive support v Server power and reset control servers. The COM1 port is used for SOL on ThinkServer servers SNMP support is limited to SNMPv1. On rack-mounted and tower servers, the
  • Lenovo ThinkServer TD200x | User Guide - Page 13
    version 6.0 or later with the latest Service Pack v Mozilla Firefox version 1.5 or later The following server operating systems have USB support, which is required for the remote presence feature: v Microsoft Windows® Server® 2008 v Microsoft Windows Server 2003 v Red Hat Enterprise Linux® versions
  • Lenovo ThinkServer TD200x | User Guide - Page 14
    8 Integrated Management Module: User Guide
  • Lenovo ThinkServer TD200x | User Guide - Page 15
    service Web interface The IMM supports both static and Dynamic server. Note: Approximately 2 minutes after the server is connected to ac power, the power-control button becomes active. The welcome screen is displayed. 2. When the prompt Setup is displayed Lenovo 2009. Portions © IBM Corp. 2009. 9
  • Lenovo ThinkServer TD200x | User Guide - Page 16
    and the server health summary. For descriptions of the actions that you can perform from the links in the left navigation pane of the IMM Web interface, see "IMM action descriptions" on page 11. Then, go to Chapter 3, "Configuring the IMM," on page 15. 10 Integrated Management Module: User Guide
  • Lenovo ThinkServer TD200x | User Guide - Page 17
    to interact with and control the server. When you have mounted a disk, you can use it to restart the server and to update firmware on the server. The mounted disk appears as a USB disk drive that is attached to the server. PXE Network Boot Change the host server startup (boot) sequence for the
  • Lenovo ThinkServer TD200x | User Guide - Page 18
    used. You can also enable or disable whether an SSL connection is used to connect to an LDAP server. Enable Secure Shell (SSH) access You can enable SSH access to the IMM. Configuration File Back configuration summary, from the Configuration File page. 12 Integrated Management Module: User Guide
  • Lenovo ThinkServer TD200x | User Guide - Page 19
    Table 2. IMM actions (continued) Link Action Restore Default Settings Restore the IMM default settings Description Attention: When you click Restore Defaults, all of the modifications that you made to the IMM are lost. Restart IMM Log off Restart the IMM Log off the IMM You can reset the
  • Lenovo ThinkServer TD200x | User Guide - Page 20
    14 Integrated Management Module: User Guide
  • Lenovo ThinkServer TD200x | User Guide - Page 21
    v From the System Settings page, you can: - Set server information - Set server timeouts - Set IMM date and time - Enable or disable Assignments page, you can change the port numbers of IMM services. v From the Network Interfaces page, you can set up Lenovo 2009. Portions © IBM Corp. 2009. 15
  • Lenovo ThinkServer TD200x | User Guide - Page 22
    the accessed remote server. 3. In this server. The problem with this server. You can type a maximum server. Include in this field sufficient detail to quickly locate the server server timeouts Note: Server drivers, see "Installing device drivers" on page 71. To set the server Server Timeouts server
  • Lenovo ThinkServer TD200x | User Guide - Page 23
    IP address that is used to set the server clock. See "Synchronizing clocks in a network" on page 18 for more information. Alerts that are sent by e-mail and SNMP use the real-time clock setting to time stamp the alerts. The clock settings support Greenwich mean time (GMT) offsets and daylight saving
  • Lenovo ThinkServer TD200x | User Guide - Page 24
    NTP feature supports only the service Use this selection to enable or disable automatic synchronization of the IMM clock with an NTP server. NTP server host name or IP address Use this field to specify the name of the NTP server to be used for clock synchronization. NTP update Guide
  • Lenovo ThinkServer TD200x | User Guide - Page 25
    IMM. To prevent any application that is running on the server from requesting the IMM to perform tasks, you must disable update package utilities might not work. Note: The ASU works with a disabled USB in-band interface if an IPMI device driver manually" on page 71. Chapter 3. Configuring the IMM 19
  • Lenovo ThinkServer TD200x | User Guide - Page 26
    more information, see Chapter 2, "Opening and using the IMM Web interface," on page 9. 2. In the navigation pane, click Login Profiles. 20 Integrated Management Module: User Guide
  • Lenovo ThinkServer TD200x | User Guide - Page 27
    initial setup of the IMM. 3. Click Add User. An individual profile is displayed. 4. In the Login ID field, type the name of the profile. You media feature. v Remote Server Power/Restart Access: A user can access the power-on and restart functions for the remote server. These functions are available
  • Lenovo ThinkServer TD200x | User Guide - Page 28
    following advanced functions: firmware updates, PXE network boot, restore - Remote Console and Remote Disk Access - Adapter Configuration - login ID authority level to have Remote Server Power/Restart Access or Ability to Clear protected using encryption. The supported methods are DES and AES Guide
  • Lenovo ThinkServer TD200x | User Guide - Page 29
    pane, click Login Profiles. The Login Profiles page displays each login ID, the login access level, and IMM attempts to authenticate the user by using the LDAP server. Local user tables on the IMM are never searched the IPMI interface because IPMI does not support LDAP authentication. b. Even if the
  • Lenovo ThinkServer TD200x | User Guide - Page 30
    age that is allowed before the password must be changed. Values of 0 - 365 days are supported. Select 0 to disable the password expiration checking. 9. Click Save. Configuring remote alert settings You can and using the IMM Web interface," on page 9. 24 Integrated Management Module: User Guide
  • Lenovo ThinkServer TD200x | User Guide - Page 31
    pane, click Alerts. The Remote Alert Recipients page is displayed. You can see the notification method and alert status for : Critical alerts Critical alerts are generated for events that signal that a server component is no longer functioning. Warning alerts Warning alerts are generated for events
  • Lenovo ThinkServer TD200x | User Guide - Page 32
    The MIB files are included in the IMM firmware update packages. 2. IMM supports the SNMPv1 and SNMPv3 standards. Complete the following steps COM2 is not configurable through the IPMI interface. On rack-mounted and tower servers, COM2 is an internal COM port with no external access. Both serial Guide
  • Lenovo ThinkServer TD200x | User Guide - Page 33
    Serial Redirect/CLI Settings area, select CLI with EMS compatible keystroke sequences if you want to use the Microsoft Windows Server 2003 Emergency Management Services (EMS) compatible key sequence to exit the serial redirection operation, or select CLI with user defined keystroke sequences if you
  • Lenovo ThinkServer TD200x | User Guide - Page 34
    view and interact with the server console. The default is 3900 for rack-mounted and tower servers. The following port numbers are reserved and can be used only for the corresponding services. Table 3. Reserved port the IMM, complete the following steps: 28 Integrated Management Module: User Guide
  • Lenovo ThinkServer TD200x | User Guide - Page 35
    overrides any manual settings. If you want to assign a static IP address to the IMM, select Disabled - Use static IP configuration. If DHCP is enabled, the host name is assigned as follows: v If the Hostname field contains an entry, the IMM DHCP support requests that the DHCP server use this
  • Lenovo ThinkServer TD200x | User Guide - Page 36
    a number 0 9. The IMM does not support the use of a multicast address. The first server IP address, and up to three DNS server IP addresses. 14. If DHCP is enabled, to view the DHCP server assigned setting, click IP Configuration Assigned by DHCP Server. 30 Integrated Management Module: User Guide
  • Lenovo ThinkServer TD200x | User Guide - Page 37
    Access Protocol (LDAP) v Configure Service Location Protocol (SLP) Changes to SNMP agent to collect information and to control the server. The IMM can also be configured to send SNMP files are included in the IMM firmware update packages. 2. IMM supports the SNMPv1 and SNMPv3 standards. To
  • Lenovo ThinkServer TD200x | User Guide - Page 38
    the IP addresses of up to three DNS servers on your network. Each IP address must contain integers from 0 - 255, separated by periods. 5. Scroll to the bottom of the page and click Save. 6. In the navigation pane, click Restart IMM to activate the changes. 32 Integrated Management Module: User Guide
  • Lenovo ThinkServer TD200x | User Guide - Page 39
    LDAP server. This requires LDAP client support on the IMM. You can also assign authority levels according to information that is found on the LDAP server. You or more LDAP servers. The LDAP server that is to be used for authentication can be discovered dynamically or manually preconfigured. 3.
  • Lenovo ThinkServer TD200x | User Guide - Page 40
    Service Name The DNS SRV request that is sent to the DNS server must also specify a service server, select Use Pre-Configured LDAP Server. Note: The port number for each server configure at least one LDAP server. You can configure the tree on the LDAP server (for example, dn the LDAP server is followed
  • Lenovo ThinkServer TD200x | User Guide - Page 41
    it is used to specify to which groups the service processor belongs. This means that the user must . For Active Directory environments only, nested group membership is supported. For example, if a user is a member of is strongly discouraged because most servers are configured to not allow search
  • Lenovo ThinkServer TD200x | User Guide - Page 42
    LDAP server is represent user IDs on that server. Specifically, this name servers, the attribute name that is used for user IDs is usually sAMAccoutName. On Novell eDirectory and OpenLDAP servers an OpenLDAP server environment, through an LDAP server successfully, the login to the server must specify
  • Lenovo ThinkServer TD200x | User Guide - Page 43
    example, restart, remote actions, and firmware updates) or modify anything (using the save, clear server console. v Remote Console and Remote Disk (bit position 6): If this bit is set, the user can access the remote server console and the remote disk functions for the remote server. v Remote Server
  • Lenovo ThinkServer TD200x | User Guide - Page 44
    IMM) but cannot make them take effect. Service Location Protocol (SLP) To view the Service Location Protocol (SLP) area. The multicast address, which is the IP address that the IMM SLP server listens on, is displayed server: a. Disable the SSL server. Use the HTTPS Server Configuration for Web Server
  • Lenovo ThinkServer TD200x | User Guide - Page 45
    , tampering, and message forgery. You can configure the IMM to use SSL support for two types of connections: secure server (HTTPS) and secure LDAP connection (LDAPS). The IMM takes on the role of SSL client or SSL server depending on the type of connection. The following table shows that the IMM
  • Lenovo ThinkServer TD200x | User Guide - Page 46
    Web browser to use SSL3 or TLS. Older export-grade browsers with only SSL2 support cannot be used. 3. In the SSL Server Certificate Management area, select Generate a New Key and a Self-signed Certificate. 4. signing request, complete the following steps: 40 Integrated Management Module: User Guide
  • Lenovo ThinkServer TD200x | User Guide - Page 47
    the navigation pane, click Security. 2. In the SSL Server Configuration for Web Server area, make sure that the SSL server is disabled. If it is not disabled, select Disabled in the SSL Server field and then click Save. 3. In the SSL Server Certificate Management area, select Generate a New Key and
  • Lenovo ThinkServer TD200x | User Guide - Page 48
    . The command for converting a certificate-signing request from DER to PEM format using OpenSSL is similar to the following example: 42 Integrated Management Module: User Guide
  • Lenovo ThinkServer TD200x | User Guide - Page 49
    have to convert the certificate to DER format. (If you received the certificate as text in an e-mail or a Web page, it is probably in PEM format.) server: 1. In the navigation pane, click Security. The page that is displayed shows that a valid SSL server certificate is installed. If the SSL server
  • Lenovo ThinkServer TD200x | User Guide - Page 50
    process, click Import Certificate. A progress indicator is displayed as the file is transferred to storage on the IMM. Continue displaying this page until the transfer is completed. The stored on an LDAP server. Public key authentication is not supported. 44 Integrated Management Module: User Guide
  • Lenovo ThinkServer TD200x | User Guide - Page 51
    for the operation to be completed. Enabling the Secure Shell server From the Security page you can enable or disable the Secure Shell server. The selection that you make takes effect only after the IMM is restarted. The value that is displayed on the screen (Enabled or Disabled) is the last selected
  • Lenovo ThinkServer TD200x | User Guide - Page 52
    this procedure does not include the server firmware configuration settings or any IPMI . In Microsoft Internet Explorer, click Save this file to disk, then click OK. Restoring and modifying your IMM configuration only the fields that allow changes are displayed. To change between this view and the
  • Lenovo ThinkServer TD200x | User Guide - Page 53
    type of service processor or was created by the same type of service processor with displayed as the firmware on the IMM is updated. A confirmation window opens to verify whether the update default settings of the IMM. If this is a local server, your TCP/IP connection will be broken, and you must
  • Lenovo ThinkServer TD200x | User Guide - Page 54
    Logging off To log off the IMM or another remote server, click Log Off in the navigation pane. 48 Integrated Management Module: User Guide
  • Lenovo ThinkServer TD200x | User Guide - Page 55
    thresholds, and fan status of your server. You can system health and environmental information of the server, complete the following steps: 1. Log update of the overall health of the server. The status of your server displayed: v A solid green circle and the phrase Server is displayed on the and fan
  • Lenovo ThinkServer TD200x | User Guide - Page 56
    the IMM reacts. The voltage threshold values are preset on the remote server and cannot be changed. The IMM Web interface displays the voltage readings of the system board and the voltage regulator modules ( to configured remote alert recipients. You must 50 Integrated Management Module: User Guide
  • Lenovo ThinkServer TD200x | User Guide - Page 57
    of max) area. The IMM Web interface displays the running speed of the server fans (expressed in a percentage of the maximum fan speed). If you click a fan reading, a new window opens. You receive a fan alert when the fan speeds drop to an unacceptable level or when the fans stop. You must select the
  • Lenovo ThinkServer TD200x | User Guide - Page 58
    server displayed on your screen. 7. Scroll down to the Users Currently Logged in area. The IMM Web interface displays displays server. 3. Scroll down to view Manual that is available on the Lenovo Support Web site at http://www.lenovo.com/support. Error codes and messages are displayed troubleshooting
  • Lenovo ThinkServer TD200x | User Guide - Page 59
    Warning This severity level is assigned to an event that might affect server performance. Error This severity level is assigned to an event that . 4. Click Save Log as Text File to save the contents of the event log as a text file. Click Reload Log to refresh the display of the event log. Click Clear
  • Lenovo ThinkServer TD200x | User Guide - Page 60
    use DSA Preboot to view these logs, although you must restart the server to use DSA Preboot. To install Portable DSA, Installable DSA, or DSA Preboot or to download a DSA Preboot CD image, go to http://www.lenovo.com/ support or complete the following steps: Note: Changes are made periodically to
  • Lenovo ThinkServer TD200x | User Guide - Page 61
    the event logs or create an output file that you can send to Lenovo service and support. v Type the IP address of the IMM and go to the Event Log page. v Use IPMItool to view the system-event log. The server is not hung and is not connected Use IPMItool locally to view the
  • Lenovo ThinkServer TD200x | User Guide - Page 62
    monitoring. Component Level VPD The vital product data for the components of the remote managed server is displayed in this area. Table 8. Component-level vital product data Field Function FRU name Identifies Indicates when the firmware was released. 56 Integrated Management Module: User Guide
  • Lenovo ThinkServer TD200x | User Guide - Page 63
    the server console v Remotely attach a disk or disk image to the server v Update the IMM firmware Note: Some features are available only on servers running a supported Microsoft Windows operating system. Viewing server power and restart activity The Server Power/Restart Activity area displays the
  • Lenovo ThinkServer TD200x | User Guide - Page 64
    server at a specified daily or weekly time (with or without restarting the server), and turn on the server at a specified daily or weekly time. A confirmation message is displayed the server console. You can also assign to the server a CD or DVD drive, diskette drive, USB flash drive, or disk image
  • Lenovo ThinkServer TD200x | User Guide - Page 65
    After a flash update of the IMM firmware, the Java applet that the server uses might not be at the latest level. To correct this problem, complete the following user interface (GUI) display of the server, viewed on your computer. You see on your monitor exactly what is on the server console, and you
  • Lenovo ThinkServer TD200x | User Guide - Page 66
    . 3. To control the server remotely, use one of Disk and Remote Console functionality. If the Encrypt disk disk is currently mapped. See "Remote disk" on page 64 for instructions about closing and unmapping a remote disk. 2. If you have mouse or keyboard problems video display contents of the server.
  • Lenovo ThinkServer TD200x | User Guide - Page 67
    Color Mode in the menu, two color-mode choices are displayed: v Color: 7, 9, 12, and 15-bit v Grayscale: 16, 32, 64, 128 shades 3. Select the color or grayscale setting. Remote control keyboard support The operating system on the client server that you are using traps certain key combinations, such
  • Lenovo ThinkServer TD200x | User Guide - Page 68
    server, the user can switch the server directly to the server. This provides independently of the server. For example, When the Session Options window is displayed, click the General tab. 4. Remote control mouse support The Video Viewer displayed, click the Mouse tab. 62 Integrated Management Module
  • Lenovo ThinkServer TD200x | User Guide - Page 69
    4. Select one of the following mouse modes: Absolute The client sends mouse location messages to the server that are always relative to the origin (top left) of the viewing area. Relative The client sends the mouse location as an offset from the
  • Lenovo ThinkServer TD200x | User Guide - Page 70
    new software on the server, and installing or updating the operating system on the server. You can use the Remote Control feature to access the remote disk. Drives and disk images are displayed as USB drives on the server. Notes: 1. The following server operating systems have USB support, which is
  • Lenovo ThinkServer TD200x | User Guide - Page 71
    You cannot unmount drives individually. You can select a diskette image file and save the diskette image in IMM memory. This enables the disk to remain mounted on the server so that you can access the disk later, even after the IMM Web interface session has ended. A maximum of one drive image can be
  • Lenovo ThinkServer TD200x | User Guide - Page 72
    file from memory, select memory. This enables the disk to remain mounted on the server so that you can access the disk from memory, server to attempt a Preboot Execution Environment (PXE) network boot at the next server server restart check box. 4. Click Save. 66 Integrated Management Module: User
  • Lenovo ThinkServer TD200x | User Guide - Page 73
    the latest firmware update applicable for the server in which the IMM is installed: a. Steps - Lenovo support and Downloads and Drivers 2. Log in the update. 6. Click Open. The file (including the full path) is displayed in the box next to Browse. 7. To begin the update process, click Update. A
  • Lenovo ThinkServer TD200x | User Guide - Page 74
    , this confirmation message is displayed immediately: IMM reset command the server is resetting, Unknown is displayed in the drivers. Updates and downloads for systems-management tools and utilities are available on the Lenovo Support Web site at http://www.lenovo.com/support. To check for updates
  • Lenovo ThinkServer TD200x | User Guide - Page 75
    v SNMPv3 v Telnet CLI v SSH CLI Chapter 5. Performing IMM tasks 69
  • Lenovo ThinkServer TD200x | User Guide - Page 76
    70 Integrated Management Module: User Guide
  • Lenovo ThinkServer TD200x | User Guide - Page 77
    Service manually, use one of the following procedures. Installing the Windows IPMI device driver The Microsoft IPMI device driver is not installed by default on Microsoft Windows Server 2003 R2 operating systems. To install the Microsoft IPMI device driver, complete the following steps: © Lenovo
  • Lenovo ThinkServer TD200x | User Guide - Page 78
    guides you through the installation. Note: The Windows installation CD might be required. Installing the LAN over USB Windows device driver and DSA update packages. server firmware, or DSA update package (see "Updating update Driver → Reinstall driver. Point the server Windows Update driver to displayed
  • Lenovo ThinkServer TD200x | User Guide - Page 79
    to 255.255.0.0. Installing the LAN over USB Linux device driver Current versions of Linux, such as RHEL5 Update 2 and SLES10 Service Pack 2, support the LAN over USB interface by default. This interface is detected and displayed during the installation of these operating systems. When you configure
  • Lenovo ThinkServer TD200x | User Guide - Page 80
    74 Integrated Management Module: User Guide
  • Lenovo ThinkServer TD200x | User Guide - Page 81
    issue commands to control server power, view server information, and identify the server. For more information about IPMItool, see "Using IPMItool" on page 68. Serial over LAN To manage servers from a remote you are logged off and the session is ended. © Lenovo 2009. Portions © IBM Corp. 2009. 75
  • Lenovo ThinkServer TD200x | User Guide - Page 82
    The Up Arrow and Down Arrow keys can be used to browse through the last eight commands. The history command displays a list of the last eight commands, which you can then use as a shortcut to execute a command, :09:6B:9E:00:3A -l 00:00:00:00:00:00 system> 76 Integrated Management Module: User Guide
  • Lenovo ThinkServer TD200x | User Guide - Page 83
    v The output of a command is displayed on the screen after the command has shown after the command completes execution. v Simple text messages are used to denote command execution status, available. To see a list of the commands that are supported, use the help or ? option, as shown in the
  • Lenovo ThinkServer TD200x | User Guide - Page 84
    display system> Monitor commands The monitor commands are as follows: v clearlog v fans v readlog v syshealth v temps v volts clearlog command Description Use the command. fans command Description Use the fans command to display the speed for each of the server fans. Example system> fans fan1
  • Lenovo ThinkServer TD200x | User Guide - Page 85
    6 E SERVPROC 12/18/03 10:09:31 Fan 2 Fault. Multiple fan failures 7 E SERVPROC 12/18/03 10:09:31 Fan 1 Fault. Single fan failure 8 I SERVPROC 12/18/03 10:09:25 to display a summary of the health of the server. The power state, system state, restart count, and IMM software status are displayed.
  • Lenovo ThinkServer TD200x | User Guide - Page 86
    Use the volts command to display all the voltages and voltage thresholds. The same set of voltages are displayed as in the Web interface. display vital product data for the system (sys), IMM, server firmware (bios), and Dynamic System Analysis Preboot (dsa). The same information is displayed
  • Lenovo ThinkServer TD200x | User Guide - Page 87
    commands, you must have power and restart access authority. power on turns on the server power. power off turns off the server power. The -s option shuts down the operating system before the server is turned off. power state displays the server power state (on or off) and the current state of the
  • Lenovo ThinkServer TD200x | User Guide - Page 88
    can use the ifconfig command to enable or disable DHCP. Example system> dhcpinfo eth0 -server 192.168.70.29 -n IMMA00096B9E003A -i 192.168.70.202 -g 192.168.70.29 -s 255.255.255.0 -d linux-sp.raleigh.lenovo.com -dns1 192.168.70.29 -dns2 0.0.0.0 -dns3 0.0.0.0 system> The following table describes
  • Lenovo ThinkServer TD200x | User Guide - Page 89
    configure the Ethernet interface. Type ifconfig eth0 to display the current Ethernet interface configuration. To change the disabled, enabled Configuration method dhcp, static, dthens (dthens corresponds to the try dhcp server, if it fails use static config option on the Web interface) Static IP
  • Lenovo ThinkServer TD200x | User Guide - Page 90
    changes will become active after the next reset of the IMM. system> Note: The -b option in the ifconfig display is for the burned-in MAC address. The burned-in MAC address is read-only and is not configurable. up to 63 characters for group_search_attr 84 Integrated Management Module: User Guide
  • Lenovo ThinkServer TD200x | User Guide - Page 91
    s2pn s3pn -u -v -w -h Description Login permission attribute Domain source Service name Client password Confirm client password Values String of up to for search_attrib Get LDAP server Off, on address through DNS Allows wildcards in the group name Off, on Displays the command usage and
  • Lenovo ThinkServer TD200x | User Guide - Page 92
    Protocol server No values are used with this parameter. Example system> ntp -en: disabled -f: 3 minutes -i: not set passwordcfg command Syntax passwordcfg [options] options: {-high}|{-legacy}|{-exp|-cnt|-nul} -legacy -high -exp: -cnt: -nul: -h Description Use the passwordcfg command to display
  • Lenovo ThinkServer TD200x | User Guide - Page 93
    > system> srcfg command Syntax srcfg [options] options: -exitcliseq exitcli_keyseq Description Use the srcfg command to configure the serial redirection. Type srcfg to display the current configuration. To change the serial redirect configuration, type the Chapter 7. Command-line interface 87
  • Lenovo ThinkServer TD200x | User Guide - Page 94
    output only from the command-line interface: Server secure transport enable This status display is read-only and cannot be set directly. Server Web/CMD key status This status display is read-only and cannot be set Key stored, CSR available for download 88 Integrated Management Module: User Guide
  • Lenovo ThinkServer TD200x | User Guide - Page 95
    SSL server CSR key status This status display is read-only and cannot be set directly. Possible cert installed Private Key stored, CSR available for download SSL client CSR key status This status display is read-only and cannot be set directly. Possible command line output values are as follows:
  • Lenovo ThinkServer TD200x | User Guide - Page 96
    of the following values, separated by |: am (User account management access) rca (Remote console access) rcvma (Remote console and virtual media access) pr (Remote server power/restart access) cel (Ability to clear event logs) bc (Adapter configuration [basic]) 90 Integrated Management Module: User
  • Lenovo ThinkServer TD200x | User Guide - Page 97
    11. 12. system> IMM control commands The IMM control commands are as follows: v clearcfg v clock v identify v resetsp v update clearcfg command Description Use the clearcfg command to set the IMM configuration to its factory defaults. You must have at least Advanced
  • Lenovo ThinkServer TD200x | User Guide - Page 98
    mm/dd/yyyy -t hh:mm:ss -g gmt offset -dst on/off/special case Description Use the clock command to display the current date and time according to the IMM clock and the GMT offset. You can set the date, time, -s off system> identify -s on -d 30 ok system> 92 Integrated Management Module: User Guide
  • Lenovo ThinkServer TD200x | User Guide - Page 99
    -l filename Description Use the update command to update the firmware on the IMM or IMM. To use this command, you must have at least Advanced Adapter Configuration authority. The firmware file (specified by filename) is first transferred from the TFTP server (specified by its IP address
  • Lenovo ThinkServer TD200x | User Guide - Page 100
    update -i 192.168.70.200 -l imm_yuoo20a.upd -v Firmware update is in progress. Please wait.. Image Downloaded. system>update -i 192.168.70.200 -l imm_yuoo20a.upd -v Firmware update is displayed in consecutive # characters. system>update -i 192.168.70.200 -l dsa_d6yt28a_68608_2.upd Firmware update is
  • Lenovo ThinkServer TD200x | User Guide - Page 101
    ThinkServer Documentation DVD provided with your server. See the troubleshooting information in your system documentation for instructions for using the diagnostic programs. The troubleshooting information or the diagnostic programs might tell you that you need additional or updated device drivers
  • Lenovo ThinkServer TD200x | User Guide - Page 102
    ://www.lenovo.com. For support on Lenovo products, go to http://www.lenovo.com/support. Calling for service During the warranty period, you can get help and information by telephone through the Customer Support Center. These services are available during the warranty period: v Problem determination
  • Lenovo ThinkServer TD200x | User Guide - Page 103
    . To determine whether your computer is eligible for International Warranty Service and to view a list of the countries where service is available, go to http://www.lenovo.com/support, click Warranty, and follow the instructions on the screen. For technical assistance with the installation of, or
  • Lenovo ThinkServer TD200x | User Guide - Page 104
    98 Integrated Management Module: User Guide
  • Lenovo ThinkServer TD200x | User Guide - Page 105
    and verify the operation of any other product, program, or service. Lenovo may have patents or pending patent applications covering subject matter described document are not intended for use in implantation or other life support applications where malfunction may result in injury or death to
  • Lenovo ThinkServer TD200x | User Guide - Page 106
    depending on operating environments. Maximum internal hard disk drive capacities assume the replacement of any standard hard disk drives and population of all hard disk drive bays with the largest currently supported drives that are available from Lenovo. 100 Integrated Management Module: User Guide
  • Lenovo ThinkServer TD200x | User Guide - Page 107
    memory with an optional memory module. Lenovo makes no representation or warranties regarding non-Lenovo products and services, manuals or all program functionality. Product recycling and disposal This unit must be recycled or discarded according to applicable local and national regulations. Lenovo
  • Lenovo ThinkServer TD200x | User Guide - Page 108
    EEE. For proper collection and treatment, contact your local Lenovo representative. Compliance with Republic of Turkey Directive on the Electronic Equipment (EEE). Türkiye EEE Yönetmeliğine Uygunluk Beyanı Bu Lenovo ürünü, T.C. Çevre ve Orman Bakanlığı'nın "Elektrik ve Elektronik Eşyalarda
  • Lenovo ThinkServer TD200x | User Guide - Page 109
    or service manual for specific battery information. The battery must be recycled or disposed of properly. Recycling facilities may not be available in your area. For information on disposal or batteries outside the United States, go to http://www.lenovo.com/lenovo/environment or contact your local
  • Lenovo ThinkServer TD200x | User Guide - Page 110
    presence of hazardous substances. For proper collection and treatment, go to http://www.lenovo.com/lenovo/environment. For California: Perchlorate material - special handling may apply. See http:// dioxide battery which contains a perchlorate substance. 104 Integrated Management Module: User Guide
  • Lenovo ThinkServer TD200x | User Guide - Page 111
    display work place devices according to clause 2 of the German Ordinance for Work with Visual Display installed and used in accordance with the instruction manual, may cause harmful interference to radio used in order to meet FCC emission limits. Lenovo is not responsible for any radio or television
  • Lenovo ThinkServer TD200x | User Guide - Page 112
    EC on the approximation of the laws of the Member States relating to electromagnetic compatibility. Lenovo cannot accept responsibility for any failure to satisfy the protection requirements resulting from a non- üher 89/336/EWG), für Geräte der Klasse A. 106 Integrated Management Module: User Guide
  • Lenovo ThinkServer TD200x | User Guide - Page 113
    EMVG das EG-Konformitätszeichen - CE - zu führen. Verantwortlich für die Konformitätserklärung nach Paragraf 5 des EMVG ist die Lenovo (Deutschland) GmbH, Gropiusplatz 10, D-70563 Stuttgart. Informationen in Hinsicht EMVG Paragraf 4 Abs. (1) 4: Das Gerät erfüllt die Schutzanforderungen nach
  • Lenovo ThinkServer TD200x | User Guide - Page 114
    People's Republic of China Class A warning statement Korea Class A warning statement 108 Integrated Management Module: User Guide
  • Lenovo ThinkServer TD200x | User Guide - Page 115
    (BMC) 1, 3 BIOS (basic input/output system monitor 78 serial redirect 81 server power and restart 81 utility configuration 47 disabling USB in-band interface 19 disk, remote 3, 64 DNS, configuring 32 DSA fan speed monitoring 51 FCC Class A notice 105 features of IMM 2 firmware, updating 67 © Lenovo
  • Lenovo ThinkServer TD200x | User Guide - Page 116
    LAN over USB Linux driver 73 LAN over USB Windows driver 72 LDAP configuring authentication order 23 configuring client authentication 36 configuring search attributes 36 description 33 secure 39 setting up client 33 Lenovo ThinkServer servers Firmware Setup Utility 54, 67 updating firmware 67 VPD
  • Lenovo ThinkServer TD200x | User Guide - Page 117
    , 66 remote disk 64 unmap drives server timeout) loader 17 operating system (OS) 16 Web browser requirements 7 Web interface logging in to Web interface 10 Web interface, opening and using 9 Web server, secure 39 Web site Lenovo support 2 publication ordering 95 support 95 Windows IPMI device driver
  • Lenovo ThinkServer TD200x | User Guide - Page 118
    112 Integrated Management Module: User Guide
  • Lenovo ThinkServer TD200x | User Guide - Page 119
  • Lenovo ThinkServer TD200x | User Guide - Page 120
    Printed in USA
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
Integrated Management Module User Guide