LevelOne GVT-2000 Quick Install Guide

LevelOne GVT-2000 Manual

Get LevelOne GVT-2000 PDF manuals and user guides View all LevelOne GVT-2000 manuals
Add to My Manuals
Save this manual to your list of manuals

LevelOne GVT-2000 manual content summary:

  • LevelOne GVT-2000 | Quick Install Guide - Page 1
    Copper to Fiber Stand-Alone Media Converter Quick Installation Guide Model No. FVT-2001 FVT-2002 FVT-2201 FVT-2401 GVT-2000 GVT-2001 Description 10/100BASE-TX to 100BASE-FX MMF SC Converter, 2km 10/100BASE-TX to 100BASE-FX MMF ST Converter, 2km
  • LevelOne GVT-2000 | Quick Install Guide - Page 2
    Table of Contents 1. INTRODUCTION 1 1.1. FEATURES 1 1.2. PACKAGE CONTENTS 2 2. HARDWARE DESCRIPTION 3 2.1. FRONT PANEL 3 2.2. REAR PANEL 4 2.3. LED INDICATORS 5 2.4. DIP-SWITCH 7 3. CABLING 9 4. SPECIFICATION 11 5. OPTIONAL SFP MODULES 13
  • LevelOne GVT-2000 | Quick Install Guide - Page 3
    connector to provide necessary connection interface and distance capabilities. LevelOne have designed 19" racks to organize media converters the cabling.  One RJ-45 connector, Auto-MDI/MDIX for UTP port.  Support 10/100 Mbps Auto-negotiation for UTP port.  Fiber cabling connectivity up to 40Km
  • LevelOne GVT-2000 | Quick Install Guide - Page 4
    cabling.  One RJ-45 connector, Auto-MDI/MDIX for UTP port.  Support 10/100/1000 Mbps Auto-negotiation for UTP port  Fiber cabling connectivity up to Power Adapter (10/100M 5V,1A; 10/100/1000M 5V,2A) - User Manual Compare the contents of your converter module with the checklist above. If any item
  • LevelOne GVT-2000 | Quick Install Guide - Page 5
    2. Hardware Description 2.1. Front Panel FVT-2001 / FVT-2002 / FVT-2201 / FVT-2401 GVT-2000 3 (1) RJ-45 Port (2) LED Indicators GVT-2001 2 1 4 (3) Fiber/SFP Connector (4) DIP-Switch 3
  • LevelOne GVT-2000 | Quick Install Guide - Page 6
    2.2. Rear Panel 4 Power Adapter: (10/100M DC 5V, 1A; 10/100/1000M DC 5V, 2A) The rear panel contains a power socket. This power socket accepts DC 5V voltage and minimum 1A & 2A supplied current. 4
  • LevelOne GVT-2000 | Quick Install Guide - Page 7
    2.3. LED Indicators Fast Ethernet Module LED PWR FX 100 TX 100 FDX FX LINK/ACT Status Meaning On Power on On 100Mbps Fiber Speed On 100Mbps UTP Speed OFF 10 Mbps UTP Speed On Converter works in the full duplex mode OFF Converter works in the half duplex mode Connection status display for
  • LevelOne GVT-2000 | Quick Install Guide - Page 8
    Gigabit Ethernet Module LED PWR 1000 100 FDX Status Meaning On Power on On 1000Mbps UTP Speed On 100Mbps UTP Speed On Converter works in the full duplex mode Off Converter works in the half duplex mode LINK/ACT (UTP) Blinks Active status display of electrical interface link Blink"
  • LevelOne GVT-2000 | Quick Install Guide - Page 9
    2.4. DIP-switch The DIP-switch is used to configure operation mode for LLF (Link Lost Forwarding) and operation mode for UTP/Fiber port. The default value of DIPswitch is OFF. Fast Ethernet Module No Status Description ON LFP is Enable 1 OFF LFP is Disable ON Modified cut-through switch mode
  • LevelOne GVT-2000 | Quick Install Guide - Page 10
    Link Lost Forwarding: When LLF is enable, allow UTP link failures to be reported to the fiber side and also allow Fiber link failure to be reported to the UTP side. Therefore, A link loss forward feature is provided in both UTP and Fiber side. Pure Converter mode (Fast Ethernet Module): When pure
  • LevelOne GVT-2000 | Quick Install Guide - Page 11
    3. Cabling Fast Ethernet Module  Twisted-pair segment can be use unshielded twisted pair (UTP) or shielded twisted pair (STP) cabling. The cable must comply with the IEEE 802.3u 100Base TX standard for Category 5. The cable between the converter and the link partner (switch, hub, workstation, etc.)
  • LevelOne GVT-2000 | Quick Install Guide - Page 12
    Optical Fiber Module Name 100Base-FX Fiber SC MM 100Base-FX Fiber ST MM 100Base-FX Fiber SC SM 20KM 100Base-FX Fiber SC SM 40KM 1000Base-SX Fiber SC MM Wavelength Avg. Launch Avg. Power Sensitivity 1310 (nm) >-21dBm -31dBm 1310 (nm) >-21dBm -31dBm 1310 (nm) >-15dBm -34dBm 1310 (nm) 850 (
  • LevelOne GVT-2000 | Quick Install Guide - Page 13
    4. Specification Fast Ethernet Module IEEE802.3 10BASE-T Standard IEEE802.3u 100BASE-TX/100BASE-FX IEEE802.3x Flow Control and Back pressure Fiber: Duplex ST/SC Connector RJ-45 Socket: CAT-3/5 (10/100Mbps) Twisted Pair cable, Auto MDI/MDI-X, Auto-Negotiation Switch architecture Store and
  • LevelOne GVT-2000 | Quick Install Guide - Page 14
    Gigabit Ethernet Module Standard Connector Switch architecture Fiber parameters Transparent packet Link Lost Forward DIP Switch LED Power IEEE802.3 10BASE-T IEEE802.3u 100BASE-TX/100BASE-FX IEEE 802.3ab 1000BaseT IEEE 802.3z 1000BaseSX/LX standards IEEE802.3x Flow Control and Back pressure Fiber:
  • LevelOne GVT-2000 | Quick Install Guide - Page 15
    5. Optional SFP Modules CVH-2000 supports 3.3V mini-GBIC module Model No. Description GVT-0300 1.25G MMF SFP Transceiver, 550 m, 850nm GVT-0301 1.25G SMF SFP Transceiver, 10 km, 1310nm GVT-0302 1.25G SMF SFP Transceiver, 80 km, 1550nm 13
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
Copper to Fiber
Stand-Alone Media Converter
Quick Installation Guide
Model
No.
Description
FVT-2001
10/100BASE-TX to 100BASE-FX MMF SC
Converter, 2km
FVT-2002
10/100BASE-TX to 100BASE-FX MMF ST
Converter, 2km
FVT-2201
10/100BASE-TX to 100BASE-FX SMF SC
Converter, 20km
FVT-2401
10/100BASE-TX to 100BASE-FX SMF SC
Converter, 40km
GVT-2000
10/100/1000BASE-T to 1000BASE-X SFP
Converter
GVT-2001
10/100/1000BASE-T to 1000BASE-SX MMF SC
Converter, 550m
Ver. 1.2 - 1305