LevelOne IEC-1000 Datasheet
LevelOne IEC-1000 Manual
 |
View all LevelOne IEC-1000 manuals
Add to My Manuals
Save this manual to your list of manuals |
LevelOne IEC-1000 manual content summary:
- LevelOne IEC-1000 | Datasheet - Page 1
LevelOne IEC-1000 is an industrial Fast Ethernet media converter with a rugged aluminium case which providing superb heat dissipation. This converter is designed to be mounted on an industrial standard standard immunity for Industrial environment - ISA 12.12.01 (UL1604) Class case - Supports DIN-rail - LevelOne IEC-1000 | Datasheet - Page 2
with Cross Weight and Drop High standard table NEMA TS1/2 Environmental requirements for traffic control equipment Order Information - IEC-1000 10/100 Industrial Media Converter, SC MM 2KM -40 to 75C Package Contents IEC-1000 Quick Installation Guide www.level1.com one world_one brand_one level_
-
1 -
2
 |
 |
10/100 Industrial Media Converter, SC MM 2KM
-40 to 75C
Overview
LevelOne IEC-1000 is an industrial Fast Ethernet media converter with a
rugged aluminium case which providing superb heat dissipation. This
converter is designed to be mounted on an industrial standard DIN-rail,
plus the clearly visible status LEDs provide simple monitoring of port link
activity. It also features Link Fault Pass Through in order to alert remote
location when link status changes.
Fault Detection
Relay contact sends alert signal when the power failed or a port link
disconnected, therefore the system operator can respond quickly. This
relay contact can be easily configured with a simple DIP switch.
Features
- Complies with NEMA TS1 & TS2 Environmental requirements for
Traffic control equipment
- Complies with IEC61000-6-2 EMC Generic standard immunity for
Industrial environment
- ISA 12.12.01 (UL1604) Class I, Division 2 Classified for use in
hazardous locations with DC Terminal Block power
- DIP switch configuration for "Link-Fault-Pass-Through," link down
alarm, speed, duplex mode
- 128K bits buffer memory
- 10/100Mbps-Full/Half-duplex, Auto-Negotiation, Auto-MDI/MDIX
- Full wire-speed forwarding rate
- Alarms for power and port link failure by relay output
- -40°C to 75°C (-40°F to 167°F) operating temperature range, tested for
functional operation @ -40°C to 85°C (-40°F to 185°F)
- IP30 aluminum case
- Supports DIN-rail mounting installation
Safety
Complies with NEMA (National Manufacturers Association) TS1 & TS2
Environmental certified for the Traffic Control Equipment that withstand
extreme temperatures, operating voltage and humidity fluctuation,
vibration and shock commonly experienced in severe outdoor
environments.
High Reliability
All components are built to withstand harsh environment applications
without compromise where humidity, temperature variation and even
shock vibration are concerns, including Electric & Utility, Critical
Infrastructure, Transportation and Surveillance Security. This device
operates under -40 to 75 Celsius (-40 to 167 Fahrenheit) temperature.
IEC-1000
Diagrams
Unit: mm
Side
Buttom
Back
Top
Front
F
A
UL
T
GND
PWR2
PWR1
GND
50
135
110
DC TERMINAL BLOCK