LevelOne IEC-1000 Quick Install Guide
LevelOne IEC-1000 Manual
 |
View all LevelOne IEC-1000 manuals
Add to My Manuals
Save this manual to your list of manuals |
LevelOne IEC-1000 manual content summary:
- LevelOne IEC-1000 | Quick Install Guide - Page 1
to 75°C (-40°F to 167°F) operating temperature range IP30 aluminium case Supports DIN-rail mounting installation Package Contents IEC-1000 Quick Installation Guide IEC-1000 Page 2 Overview LevelOne IEC-1000 is an industrial Fast Ethernet media converter with a rugged aluminium case which - LevelOne IEC-1000 | Quick Install Guide - Page 2
link down alarm Note: LFPT: Link Forward Pass Through Disconnect the power before change the DIP switch settings IEC-1000 Page 5 10/100Base-TX Connector Pin Standard Port 1 Output Transmit Data + 2 Output Transmit Data 3 Input Receive Data + 4 NC 5 NC 6 Input Receive Data 7 NC 8 NC Uplink
-
1 -
2
 |
 |
IEC-1000
10/100 Industrial Media Converter, SC MM 2KM -40 to 75C
Quick Installation Guide
v1.00
‐
1209
IEC-1000
Page 1
Overview
LevelOne IEC-1000 is an industrial Fast Ethernet media converter
with a rugged aluminium case which providing superb heat
dissipation. This converter is designed to be mounted on an
industrial standard DIN-rail, plus the clearly visible status LEDs
provide simple monitoring of port link activity. It also features Link
Fault Pass Through in order to alert remote location when link
status changes
Fault Detection
Relay contact sends alert signal when the power failed or a port link
disconnected, therefore the system operator can respond quickly.
This relay contact can be easily configured with a simple DIP switch
High Reliability
All components are built to withstand harsh environment
applications without compromise where humidity, temperature
variation and even shock vibration are concerns, including Electric
& Utility, Critical Infrastructure, Transportation and Surveillance
Security. This device operates under -40 to 75 Celsius (-40 to 167
Fahrenheit) temperature.
Safety
Complies with NEMA (National Manufacturers Association) TS1 &
TS2 Environmental certified for the Traffic Control Equipment that
withstand extreme temperatures, operating voltage and humidity
fluctuation, vibration and shock commonly experienced in severe
outdoor environments.
IEC-1000
Page 2
Features
100Base-FX Multimode fibre for the link up to 2 kilometres
Complies with NEMA TS1 & TS2 Environmental requirements for
Traffic control equipment
Complies with IEC61000-6-2 EMC Generic standard immunity for
Industrial environment
ISA 12.12.01 (UL1604) Class I, Division 2 Classified for use in
hazardous locations with DC Terminal Block power
DIP switch configuration for "Link-Fault-Pass-Through," link
down alarm, speed, duplex mode
128K bits buffer memory
10/100Mbps-Full/Half-duplex, Auto-Negotiation, Auto-
MDI/MDIX
Full wire-speed forwarding rate
Alarms for power and port link failure by relay output
-40°C to 75°C (-40°F to 167°F) operating temperature range
IP30 aluminium case
Supports DIN-rail mounting installation
Package Contents
IEC-1000
Quick Installation Guide
IEC-1000
Page 3
LED Status
LED
Status
Description
PW 1,2
Steady
Power On
Off
Power Off
FAULT
Steady
Redundant Power or Ports are failed
Off
Redundant Power or Ports are normal
LNK/ACT
Steady
Network connection is established
Flashing
Transmitting or Receiving data
Off
No connection occurred
FDX/COL
Steady
Full duplex mode
Flashing
Collision occurred
Off
Half duplex mode
100 (Mbps)
Steady
Connection at 100Mbps speed
Off
Connection at 10Mbps speed
LFP
Steady
LFPT is enabled
Off
LFPT is disabled
LFPT
: Link Forward Pass Through