LevelOne VOI-8003 Manual

LevelOne VOI-8003 Manual

Get LevelOne VOI-8003 PDF manuals and user guides View all LevelOne VOI-8003 manuals
Add to My Manuals
Save this manual to your list of manuals

LevelOne VOI-8003 manual content summary:

  • LevelOne VOI-8003 | Manual - Page 1
    VOI-8001 VOI-8002 VOI-8003 8-Port H.323/SIP VoIP Gateway User Manual 1 Ver. 1.00-0608
  • LevelOne VOI-8003 | Manual - Page 2
    Table of contents CHAPTER 1. INTRODUCTION 3 1.1 OVERVIEW ...3 1.2 PACKAGE CONTENTS 3 1.3 KEY FEATURE ...4 CHAPTER 2 GETTING STARTED 5 2.1 FRONT PANEL ...5 2.2 REAR PANEL ...6 CHAPTER 3 CONFIGURATION 7 3.1 CONNECTION ...8 3.2 SYSTEM STATUS 10 3.3 REGISTER SERVER 11 3.4 VOIP CALL OUT 12 CHAPTER
  • LevelOne VOI-8003 | Manual - Page 3
    Broadband service providers with built-in support for DHCP Client, MAC Address Cloning, PPPoE and multiple auto-provisioning methods. 1.2 Package Contents - 8-Port VoIP Gateway - CD User Manual - Cat.5 Cable - Power Adapter, 12VDC / 1.6A Model No List VOI-8001 8-Port FXS VoIP Gateway VOI-8002 8-Port
  • LevelOne VOI-8003 | Manual - Page 4
    protocol ƒ Extensible by external IVR/CDR/Billing servers for value- added application ƒ Support register up to 4 Gatekeepers / Proxy servers ƒ Support worldwide off net call by ITSP service ƒ Support Multiple dialing plan / Call hunting group ƒ Adaptive Jitter Buffer function ƒ Multiple call
  • LevelOne VOI-8003 | Manual - Page 5
    Chapter 2 Getting Started 2.1 Front Panel VOI-8001 VOI-8002 VOI-8003 (Ready) Flash: It means when the VoIP Gateway registration (Power): The LED light on when power on. Note: VOI-8001 displays 1~8 Phone LED only VOI-8002 displays 1~8 Line LED only VOI-8003 displays 1~4 Line and 5~8 Phone LED only 5
  • LevelOne VOI-8003 | Manual - Page 6
    2.2 Rear Panel VOI-8001 VOI-8002 VOI-8003 DC12V: For the included power adapter. Be sure to use only the 12VDC/1.6A power adapter included with the product. Using the wrong power
  • LevelOne VOI-8003 | Manual - Page 7
    Chapter 3 Configuration The default setting of DHCP Server inside VoIP Gateway is turn ON, So please set up your PC TCP/IP network as "Get IP Automatically" from DHCP to get internal IP from VoIP Gateway. By default, The VoIP Gateway will become the network gateway and default IP is 192.168.22.1 and
  • LevelOne VOI-8003 | Manual - Page 8
    3.1 Connection Click "Connected Type" option below "System Setup\Wan" item: Please select the type of Internet connection you have and set up the VoIP Gateway to use the Dynamic IP Address, Static IP Address, PPPoE, PPTP or L2TP connection. If your ISP has not given you an IP address, select Dynamic
  • LevelOne VOI-8003 | Manual - Page 9
    To use PPPoE ADSL connection, please select Yes in use "PPPoE" ADSL service and enter the "username" and "password" in the PPPoE setup section. Most of ADSL ISPs assign dynamic-IP settings to the VoIP Gateway when using
  • LevelOne VOI-8003 | Manual - Page 10
    3.2 System status This page reveals the status of the VoIP Gateway including WAN, LAN and some hardware/firmware information. 10
  • LevelOne VOI-8003 | Manual - Page 11
    3.3 Register Server If this VoIP Gateway wants to use SIP Proxy or GateKeeper service to transfer the VoIP call, you can input the server information here. The VoIP Gateway can register to up to four servers simultaneously. This page
  • LevelOne VOI-8003 | Manual - Page 12
    3.4 VoIP Call Out User key in the phone number through phone set dial pad, then VoIP Gateway translate the phone number by the routing table setting here to destination IP & dial out number then Call out via network protocol Remark: For Notify remark for this rule. Please use UNDERLINE to replace
  • LevelOne VOI-8003 | Manual - Page 13
    „ IP address, for example: 168.56.9.22 „ URL, route via URL. For example: www.freeworlddialip.com .This VoIP Gateway can setup to register to DDNS service (/System Setup /Advanced/ Dynamic DNS/) to let user call out to another VoIP Gateway with dynamic IP by URL. „ rsn , route via server, it will
  • LevelOne VOI-8003 | Manual - Page 14
    Chapter 4 Web UI Management 4.1 Access to Web UI The VoIP Gateway provide user friendly Web interface to let you configure your VoIP Gateway function The default setting of DHCP Server inside VoIP Gateway is turn ON, So please set up your PC TCP/IP network as "Get IP Automatically" from DHCP to get
  • LevelOne VOI-8003 | Manual - Page 15
    4.2 Web UI Management The VoIP Gateway provide user friendly Web interface to let you configure your VoIP Gateway function and VoIP function. There are a help on line content within each setting page. Please press Help hyperlink to view the on line help. There are 3 main functions for web, VoIP,
  • LevelOne VOI-8003 | Manual - Page 16
    System Maintenance function z Configurations Backup/Restore z VoIP Module Backup/Restore z Reboot System z Save Modification Gateway Manual overview 16
  • LevelOne VOI-8003 | Manual - Page 17
    4.2.2 VoIP Function 4.4.2.1 VoIP Setup/ Port Status/ This page will display the current and last time VoIP call status & result. a. The PC time : will show the date & time that your connected PC now. b. The VoIP Gateway time : will show the date & time on this VoIP Gateway, the date& time may get
  • LevelOne VOI-8003 | Manual - Page 18
    „ Out: There is a phone call made from Network VoIP and pick up by phone set. e. Connected IP: The remotely party IP of this VoIP call. f. Caller ID: Caller ID received from telephone line port. g. Start Time: Date & time of this VoIP call begin on this port. h. End Time: Date & Time of last VoIP
  • LevelOne VOI-8003 | Manual - Page 19
    4.2.2.2 VoIP/Line Configure/ Line Setting /VoIP Setup/Line Configure/Line Setting/ This page will setup the phone line information each port. a. Port: display the port number, e.g. 1 or 2. b. Interface: Telephone interface type: „ FXO: for connect to telephone line or PBX extension line. „ FXS: for
  • LevelOne VOI-8003 | Manual - Page 20
    when you off hook the phone connected to the line 1, it will directly call to another VoIP gateway location at 168.56.09.22 and dial 601. You can enable the line 1 as hot line, and add a routing rule on the routing table on /VoIP Setup/Routing Setup/VoIP Call Out/ to assign the AREA CODE to hl1 to
  • LevelOne VOI-8003 | Manual - Page 21
    4.2.2.3 Line configure/ Tone Setting /VoIP Setup/Line Configure/ Tone Setting A.Call Progress Tone This page defines the tones generated to the phone connected to the phone port. The cadence of CPT is been defined here also. All lines use same tone parameters. After modify the tone parameters, you
  • LevelOne VOI-8003 | Manual - Page 22
    „ Busy: Define the busy tone for generate. „ Ring: Define the ring back tone for generate b. Low freq: Lower frequency for defined tone c. High freq: Higher frequency for defined tone. Each tone can define two frequencies, if only one frequency needed, please leave High Frequency to 0. d. T_ON_1,
  • LevelOne VOI-8003 | Manual - Page 23
    4.2.2.4 Line configure/ Line Feature /VoIP Setup/Line Configure/ Line Feature This page defines the feature on the phone port of the VoIP Gateway. A. Dial Pause signal length(as ,)[100~3000] ms: Define the pause time (ms) of the "," on the /Routing Setting/VoIP Call Out/. This pause time is usually
  • LevelOne VOI-8003 | Manual - Page 24
    z Current Drop-> 3 S: Enable FXS interface to generate three seconds Current Drop signal. C. Called Number Relay on FXS ： Define when use the FXS interface to outbound call, resend or Drop out the dialed number. „ Drop out: Do not send the dialed number. When use the FXS port direct connect to phone
  • LevelOne VOI-8003 | Manual - Page 25
    „ Line number Priority: The 1st line has high priority; it will always ring the 1st line if it is available. When 1st line is busy, it will try to ring 2nd line if it is free. „ Rotation: 1st line ring first, then 2nd line ring next time, when the latest line ring this time, it will come back to
  • LevelOne VOI-8003 | Manual - Page 26
    phone port of the VoIP Gateway. If use the normal phone set to connect gateway, please select "Normal". If use PBX or special PSTN line (support polarity invert), then please select "Invert". Please remember to press the Modify button to take it effect. For store back to flash memory, please press
  • LevelOne VOI-8003 | Manual - Page 27
    4.2.2.6 Routing Setup/ VoIP Call Out Setting /VoIP Setup/Routing Setup/VoIP Call Out This page let you define the routing rule for Call out to VoIP. (User press the phone number through phone set dial pad, then VoIP Gateway translate the phone number by the routing table setting here to destination
  • LevelOne VOI-8003 | Manual - Page 28
    translate for call out rule without needed to press # key. b. FirstDigitTime: Define the waiting time (seconds) for user press phone number first digit. User need to press first digits before the setting time (seconds) defined here, if VoIP Gateway wait for the defined seconds and there is no any
  • LevelOne VOI-8003 | Manual - Page 29
    function (/VoIP Setup/Line Configure/Line Setting/), the VoIP Gateway can service the hot line direct call. d. Min Digits: define the minimum example: sip.fwd.com .This VoIP Gateway can setup to register to DDNS service (/System Setup/Advanced/Dynamic DNS/) to let user call out to another VoIP
  • LevelOne VOI-8003 | Manual - Page 30
    for gatekeeper 1. gk2 for gatekeeper 2. gk for all the gatekeepers available ( search sequence: gk1 > gk2 > gk3 > gk4). Gk3_2_1 will try gk3 first, then gk2, then gk1. All the setting above can be added by port number, for examples: 168.56.9.22:8495 will call to 8495 port. „ srn, rsn: same as gkn ,
  • LevelOne VOI-8003 | Manual - Page 31
    user press the number is 886212345678 and the STRIP field is setting to 4, the first 4 digits 8862 will be truncated and actually call out number will be 12345678. g. Prefix: The numbers will be added on the prefix of the user press number. For examples, if user press the number is 12345678 and the
  • LevelOne VOI-8003 | Manual - Page 32
    C.Setting Examples Here is some VoIP call out routing table setting examples below: a. Define wait time and digits for destination phone number 10 30 5 MaxDigits: FirstDigitTime(Sec): OtherDigitTime(Sec): In this case, when user picks up the phone, the VoIP Gateway will generate 30 seconds (
  • LevelOne VOI-8003 | Manual - Page 33
    Port Message Display Port Type Status Connected IP name Caller ID Start Time End Time Talking Dialed number Sec Release by 1 FXS Idle 172.16.7.1 2004/02/19 2004/02/19 28 601 13:55:10 13:55:43 (146)onHangup 2 FXS Idle c. Call by Domain name: Index Remark Area Code Min Digits Max
  • LevelOne VOI-8003 | Manual - Page 34
    phone number from phone to real call out phone number, for example, if the VoIP Gateway is installed on Taipei and use another Gatekeeper to service global service. When user just dial 10 digits Taipei phone number like 02-12345678(do not need to press # key because Max Digits setting is 10
  • LevelOne VOI-8003 | Manual - Page 35
    1 Via_GK2 1 GK2_3_1 2 2 3 GK_ALL 3 gk2 gk2_3_1 gk Delete 3 Delete 3 Delete 3 By Index 1, if user input any phone number with prefix code is 1, The VoIP Gateway will call out via Gatekeeper 2. By Index 2, if user input any phone number with prefix code is 2, The VoIP Gateway will try to
  • LevelOne VOI-8003 | Manual - Page 36
    2 UsePF2 2 3 UseDefaultPF 3 10.1.1.2 Gate.proxy.com PF2 Delete 4 Delete 4 Index Name VAD ID1 AS 1 PF1 ON 00001 H.323 2 PF2 ON 00002 H.323 CODEC ID2 G.723.1 1001 G.723.1 1002 H.245 Tunneling AS ON E.164 ON E.164 DTMF Relay T.38 FAX Relay Package Frame Q.931 Fast Start ID3 AS
  • LevelOne VOI-8003 | Manual - Page 37
    called from network, it will check below rules fields then decide line and number to dial out. a. Area Code: Define the Prefix number this rule service, any VoIP called from network dialed number prefix digits matched with the rule will call out to phone by this rule define. Please Notify there
  • LevelOne VOI-8003 | Manual - Page 38
    function. When Enable, the gateway will check the remote caller IP range setting on /VoIP Setup/Routing Setup/Authorization/, if it is within the authorization, the gateway will allow the call out, but if the remote caller's IP is not in the range, it will refuse to call out and terminate this call.
  • LevelOne VOI-8003 | Manual - Page 39
    : VoIP Call in number is 911 and Minimum setting to 4, the VoIP Gateway will deny to call out. g. From: Define the beginning line number for service this area code VoIP call. For example, if user assigned FROM 1 TO 1 for AREA CODE 601 in this routing table, then any VoIP call for
  • LevelOne VOI-8003 | Manual - Page 40
    Index Area Code Strip Prefix Maximum Minimum From To LineNo Gatekeeper 1 601 1 1 2 602 2 2 3 Alert Profile Forward Delete Delete 5 Delete 5 Delete 5 Ex. Any VoIP Call in number with prefix 601 will ring the line 1, and Any VoIP Call in number with prefix Call in number 602 will ring the
  • LevelOne VOI-8003 | Manual - Page 41
    „ Enable: During Talk, you can answer another phone call and hold the original conversation. When some one call in when you are busy on another phone call , you will hear a du-du call waiting signal, please use flash key on your phone to hold the original call and answer the incoming call, press
  • LevelOne VOI-8003 | Manual - Page 42
    ID1 AS ID2 AS ID3 AS 1 PF1 ON G.723.1 ON Out band ON 00001 H.323 1001 E.164 2 PF2 ON G.723.1 ON In band ON 00002 H.323 1002 E.164 ID4 3 3 AS ON OFF Delete Delete 6 Delete 6 When VoIP call in number with prefix 1 will use the Profile named PF1 ( H.323 ID1 = 0001, E.164 ID
  • LevelOne VOI-8003 | Manual - Page 43
    10.1.1.1/104, it mean it will forward this call to IP 10.1.1.1 and calling number will change to 104). When the line 1 user is going to have a tour to another location with same VoIP Gateway equipment, user setup the called prefix number 601 forward to profile name CF1, and in CF1 profile, the
  • LevelOne VOI-8003 | Manual - Page 44
    4.2.2.8 VoIP Call In IVR Setting /VoIP Setup/Routing Setup/VoIP Call In IVR/ When Enable the [Prompt Voice for VoIP Call In function on /VoIP Setup/Advance Setup/Prompt Voice/ , all the remote party of VoIP caller will hear the customization upload voice file and need press the destination number.
  • LevelOne VOI-8003 | Manual - Page 45
    A. Time & Digits wait for user The VoIP Gateway wait user input the number digits & time parameters as below: Time & Digits wait for user Press. e. MaxDigits: Define the maximum digits wait for user press for all VoIP Call Out, if user press digits match the number defined here. It will go to
  • LevelOne VOI-8003 | Manual - Page 46
    c. Min Digits: define the minimum digits wait for user press for number fit this rule, if user press digits less the number defined here. It will keep waiting for input until exceed the FirstDigitTime defined time. If user press digits more then Min Digits here, the VoIP Gateway will wait time
  • LevelOne VOI-8003 | Manual - Page 47
    4.2.2.9 VoIP Routing Profile Setting /VoIP Setup/Routing Setup/Routing Profile/ This page defines the optional special VoIP parameters when making/received a VoIP call. For define some special parameters for different VoIP equipment or authorize purpose, please add a profile at /VoIP Setup/Routing
  • LevelOne VOI-8003 | Manual - Page 48
    pressed DTMF tone will be treat as general voice and been compressed then transmit to remote side to decompress play back, it maybe cause some problem on duplicate or missing DTMF receive. „ When select Out band to transfer the DTMF during VoIP, the user pressed DTMF tone will be decode by
  • LevelOne VOI-8003 | Manual - Page 49
    Please remember to press the modify button to take it effect. For store back to flash memory, please press Save Modification (/System Maintenance/Save Modification/). Here is VoIP Routing Profile setting examples below: Index Name VAD CODEC H.245 Tunneling DTMF Relay T.38 FAX Relay Package
  • LevelOne VOI-8003 | Manual - Page 50
    4.2.2.10 VoIP Forwarding Profile Setting /VoIP Setup/Routing Setup/Forwarding/ This page defines the forwarding behavior include: z get an unmatched prefix number for VoIP call in, z Line busy z No answer Please add a profile at /VoIP Setup/Routing Setup/Routing Profile/ and put the name of profile
  • LevelOne VOI-8003 | Manual - Page 51
    f. No Answer Sec. Defined the wait seconds for redirect forward to another IP(or URL). g. Delete: Delete this rule item on routing table. h. To add new rule item on routing table, please assign the item number you want to insert before, input AREA CODE then press ADD button to add it on the list.
  • LevelOne VOI-8003 | Manual - Page 52
    mean any call number with prefix 601 will always be forward to another VoIP Gateway locate at hk.big.com and dial out number is 301. When the line 2 is busy and another VoIP with prefix 602 Call in, it will forward it to the assist.big.com with same number (defined on OnBusy). When VoIP Call In
  • LevelOne VOI-8003 | Manual - Page 53
    1.4.2.11 VoIP Authorization Setting /VoIP Setup/Routing Setup/Authorization/ When this gateway has been used for outbound call, it can enable to check the remote caller gateway's IP to decide accept or refuse the call. If define the IP range here and enable the [Auth] option on the/VoIP Setup/
  • LevelOne VOI-8003 | Manual - Page 54
    gateway' MAC Address。 b. RS1-4: Indicate the status of 4 server register. „ SIP&H323: The protocol used for registering the server, this gateway supports both H.323 and SIP protocol. „ Green Indicator: Successful to register server and the register phone number. „ Red Indicator: Failure to register
  • LevelOne VOI-8003 | Manual - Page 55
    4.2.3.2 Setup the Register Server-SIP Protocol /VoIP Setup/Register Server/Server If you need use this gateway to register to the H.323 gatekeeper or SIP register/proxy server, you can setup the account for register here. This gateway can register up to four Servers simultaneously. a. Protocol:
  • LevelOne VOI-8003 | Manual - Page 56
    „ … Disable Register SIP Proxy server function. d. SIP Proxy URL: Please input the IP/URL of the SIP proxy server. e. Port [1~65535]: Port number used for register to server. The SIP protocol default is 5060, please make sure you have same port number setting on the gateway and server. f. Thought
  • LevelOne VOI-8003 | Manual - Page 57
    q. Conference ID: Some SIP Server requires an ID to enable the conference function, please input the ID here to enable that. r. Enable: Enable or disable independently each line for register. 57
  • LevelOne VOI-8003 | Manual - Page 58
    for NAT： When your gateway is installed behind the firewall or NAT, you maybe need use Proxy server to relay your call. If your gatekeeper supports this proxy function, you can enable gateway function here to use that. f. Line: Line: Number index of lines. t. Type: Interface type of the line: 58
  • LevelOne VOI-8003 | Manual - Page 59
    „ FXO: Analog phone interface for connect to PSTN or PBX extension line „ FXS: Analog phone interface for connect to phone set or PBX Co. line. g. Remark: Remark for this routing rule. Please use UNDERLINE to replace the SPACE due to HTTP protocol limitation. h. E.164: phone number used for register
  • LevelOne VOI-8003 | Manual - Page 60
    4.2.4 Auto Provision function To use the auto provision function, the system have to install a dedicate Auto Provision Server for keep all parameters for installed gateways. When Enable the Auto Provision function, the System administer can modify all the Parameters of each gateway on the local
  • LevelOne VOI-8003 | Manual - Page 61
    for provision function. g. Gateway：Display the Network VoIP Gateway gateway IP address for used on the Internet connection. h. Provision Server IP: User can manual add a new Provision Server by add its IP here and press Link .Please remember enable auto provision function before you input the new
  • LevelOne VOI-8003 | Manual - Page 62
    Traversal If your VoIP gateway is installed behind NAT, you may need a special configuration and server to establish the VoIP communication, this gateway support several method for NAT Traversal as below: z By Outbound Proxy: User can appoint an Outbound Proxy Server to handle the NAT traversal on
  • LevelOne VOI-8003 | Manual - Page 63
    4.2.5.2 Listen Port /VoIP Setup/Advance Setup/Listen Port In this page, user can define the usage port for setup the VoIP communication. Both side of gateways need use the same port for begin VoIP communication. a. SIP Listen Port : Define the listen port for SIP protocol, the default port is 5060,
  • LevelOne VOI-8003 | Manual - Page 64
    4.2.5.3 VoIP Package /VoIP Setup/Advance Setup/VoIP Package User can define the parameters relative about VoIP package on this page. z Jitter Buffer(ms): Define the Jitter buffer size, input range is from 20 to 200ms. z VoIP DTMF Relay Mode: Define the relay mode for DTMF signal: „ In band: When
  • LevelOne VOI-8003 | Manual - Page 65
    z Silence Detection / Suppression: Enable or disable the Silence Detection/VAD function. When Enable, if local gateway detect a silence situation ( no talk), it will send a VAD package rather than a full voice package for remote side to active CNG ( Comfort Noise Generation) to save the bandwidth.
  • LevelOne VOI-8003 | Manual - Page 66
    4.2.5.4 RTP Packet Summary /VoIP Setup/Advance Setup/RTP Packet Summary On this page, user will know the RTP package summary about last VoIP call. z Line#: number of line z Using CODEC: ex.: G.723.1, G.729a z Source IP: Remote side IP z Source Port: Remote side port z Packet Interval: interval time
  • LevelOne VOI-8003 | Manual - Page 67
    4.2.5.5 Flash & Call waiting /VoIP Setup/Advance Setup/Flash & Call waiting On this page, user can define the parameters relative to the FLASH key and Call Waiting function. These functions usually work with PBX z Token for flash key on VoIP(!): Define the token for flash key during VoIP protocol (
  • LevelOne VOI-8003 | Manual - Page 68
    4.2.5.6 Gain /VoIP Setup/Advance Setup/Gain This page defines different function gain on the gateway. z Gain when Dial tone phase： When phone off hook, user will hear the dial tone generated from the gateway, sser can adjust the play/record gain during this phase for stable DTMF detection. After
  • LevelOne VOI-8003 | Manual - Page 69
    4.2.5.7 QoS /VoIP Setup/Advance Setup/QoS User can define the ToS field on the VoIP packet for Quality of Service control. The ToS field is included these 2 parameters: z Precedence: bit 0,1,2 z DSCP(Diffserv Code Point): bit 3~7 User can select input either IP Precedence or DSCP value.
  • LevelOne VOI-8003 | Manual - Page 70
    4.2.5.8 CDR /VoIP Setup/Advance Setup/CDR The Gateway can export all the CDR (Call detail Record) to external CDR server by HTTP protocol. The gateway supports up to 2 CDR servers for keep the record. z Export to CDR Server: Please install and enable this function if you want to keep CDR of
  • LevelOne VOI-8003 | Manual - Page 71
    relative FAX Over IP function. „ Maximum FoIP Rate (bps) Appoint the maximum FAX transceiver rate during FoIP: ‹ Disable: Only the VoIP function is supported on the gateway. FoIP is disabled. ‹ Auto: Gateway will negotiation the maximum speed for FoIP with FAX machine.. ‹ :Appoint the Maximum speed
  • LevelOne VOI-8003 | Manual - Page 72
    4.2.5.10 Prompt Voice&Beep /VoIP Setup/Advance Setup/Prompt Voice & Beep This gateway can use voice or beep to prompt the user different situation. User can download/upload their own prompt voice wave files also. For prompt beep enable function, it can be enable by: „ VoIP Call out Beep: When enable
  • LevelOne VOI-8003 | Manual - Page 73
    „ Prompt voice for replace dial tone: Use a customize voice file to replace the dial tone „ Warming Prompt after VoIP out failure: Annunciate a customize voice file when VoIP call failure. „ No PSTN Line Connected : Annunciate a customize voice file when there is no trunk connected to the PSTN port
  • LevelOne VOI-8003 | Manual - Page 74
    4.2.6 Application 4.2.6.1 Ping test /VoIP Setup/Application/Ping Test User can use the Ping Test function to test the network status or remote device „ Ping Destination:Ping: Target device IP for ping test. „ Number of Ping[1-100]Ping: Number of ping test, maximum is 100. „ Ping Packet Size[56-5600
  • LevelOne VOI-8003 | Manual - Page 75
    function of this gateway on this page. 。 a. Enable telnet server „ Enable: Enable telnet service function, user can telnet this gateway. „ Disable: Disable telnet service function. b. Enable SNMP Server „ Enable: Enable SNMP service function, user can use SNMP on the gateway. „ Disable: Disable SNMP
  • LevelOne VOI-8003 | Manual - Page 76
    4.2.7 System 4.2.7.1 System Status This page reveals the status of the gateway including WAN, LAN and some hardware information. Internet This sub-block shows the Internet information of your home gateway. It depends on the WAN mode connecting to your ISP. The different items correspond to each WAN
  • LevelOne VOI-8003 | Manual - Page 77
    alphabetic, they are easier to remember. However, the Internet is based on IP addresses. Every time you use a domain name, a DNS 92H92H 93H93H service must translate the name into the corresponding IP address. For example, the domain name www.example.com might translate to 198.105.232.4. The
  • LevelOne VOI-8003 | Manual - Page 78
    address of the home gateway. Subnet Mask This field is the subnet mask of the network in the LAN side. DHCP Server The home gateway supports DHCP service. This field indicates the enabled status of the DHCP Server. NAT This field shows whether the NAT is enabled or not. Firewall The gateway
  • LevelOne VOI-8003 | Manual - Page 79
    LAN MAC Address Short for Media Access Control address, a hardware address that uniquely identifies each 9 node of a network. This field indicates gateway's LAN MAC address. 9 WAN MAC Address This field indicates gateway's WAN MAC address. Hardware Version Tells the version of hardware of the
  • LevelOne VOI-8003 | Manual - Page 80
    1.2.7.2 System Settings This page is used to configure the names given by the ISP, if any, to represent the gateway, and also to set the local time zone. Host Name Some ISPs request the host name to represent the home gateway. Fill the host name given by the ISP, or you may not be able to access the
  • LevelOne VOI-8003 | Manual - Page 81
    1.2.7.3 Date & Time This page is used to setting the system time of VoIP gateway; it can define the correct time by which ways. 81
  • LevelOne VOI-8003 | Manual - Page 82
    1.2.7.4 Administrator Setting This page allows you to change the user and administration password used to manage this VoIP Gateway for security reasons. 82
  • LevelOne VOI-8003 | Manual - Page 83
    1.2.7.5 System Log The system log page shows the gateway's activity logs such as the Internet connectivity, hacker attack, intrusion detection and the wireless association. The log helps you to do fault analysis or regular statistics. Download Save the log to a local file. Clear Clear the log.
  • LevelOne VOI-8003 | Manual - Page 84
    Remote Log Settings Remote Log Check this file and the gateway will send the log message to the "Send Log to" remote host. Send Log to Set the IP address to send log. Email Log When the log buffer is full, the gateway will check whether this item is enabled. If enabled, the gateway will send all the
  • LevelOne VOI-8003 | Manual - Page 85
    4.2.8 Route Function(/System Setup) 4.2.8.1 Setting WAN connection: System Setup/Connection /System Setup/WAN/Connected Type Connection Type There are five ways to connect to the Internet. They are Dynamic IP, Static IP, PPPoE, PPTP and L2TP. The cable modem ISP usually requests you to obtain the
  • LevelOne VOI-8003 | Manual - Page 86
    Request IP address You can specify the IP address you desired. But the ISP has the right to neglect it and provides you a different one. MTU (576-1500) You can specify the MTU (maximum transmission unit) of your home gateway. The default value is 1500 bytes and in normal case, you don't have to
  • LevelOne VOI-8003 | Manual - Page 87
    Subnet Mask Set the subnet mask of the network. ISP Gateway Address Set the ISP's gateway IP address. This address routes packets to Internet. C. PPPoE This page is the PPPoE configuration page. Most of the ISPs request the user to connect to central office (CO) side via PPPoE, acronym of Point-to-
  • LevelOne VOI-8003 | Manual - Page 88
    Name Some ISP provides the service name of this PPPoE connection. If so, enter this item, or The Maximum Idle Time is only worked on the auto-connect mode. It makes no effect on manual-on mode and keep-alive mode (see Connection Mode). Connection Mode Three connection modes are designed to fit
  • LevelOne VOI-8003 | Manual - Page 89
    dropped. D. DNS This page sets the primary and secondary DNS servers, which were given by your ISP or known to you. When a domain name request received, the gateway tries to resolve to it from the Primary Domain Name Server. Resolving failed, the gateway tries the Secondary sever again. Static DNS
  • LevelOne VOI-8003 | Manual - Page 90
    used to determine what subnet the LAN IP 1 1 1 address belongs to. The Gateway acts as DHCP Server Check this item, if the home gateway supports DHCP server service. This is the normal case that can make you free from installing a DHCP server in your home network. And you can connect to the
  • LevelOne VOI-8003 | Manual - Page 91
    to renew. Local Domain Name Set the gateway's local Domain Name. DNS Proxy The home gateway acts as a DNS Proxy. In this case, the DHCP service will set LAN interface IP address as the DNS server address, and inform the clients in the DHCP renew process. DHCP Client List This page
  • LevelOne VOI-8003 | Manual - Page 92
    Host Name This column shows the host name of the DHCP clients. IP Address This column shows the IP Address of the DHCP clients. MAC Address This column shows the MAC Address of the DHCP clients. Static Check this item to make the IP address static, and every time the client connect to the home
  • LevelOne VOI-8003 | Manual - Page 93
    4.2.8.3 NAT Virtual Server This is the virtual server page, which set the rules translate the private IP/private port pairs to the public ports. Private IP Set the IP address of the virtual server. Private Port Set the port of the virtual server to connect to Internet. Type Set the protocol of the
  • LevelOne VOI-8003 | Manual - Page 94
    Special Application Trigger Port To define the TCP/UDP port range to monitor, when initiating from the home network, the public ports configured in this entry will be activated. Trigger Type Defines the protocol type: TCP, UDP or both of the trigger ports. Public Port This column defines the public
  • LevelOne VOI-8003 | Manual - Page 95
    The Port Mapping page does a port range mapping. Server IP Set one of LAN client's IP address to do port mapping. Mapping Ports Set the ports to mapping from WAN to LAN. You can enter multiple ports, delimited by comma, or a range of port by dash. White space will be neglect. Public Type Defines the
  • LevelOne VOI-8003 | Manual - Page 96
    ALG Some applications have to do Application Level Gateway (ALG) to monitor the transaction or monitor the payload of the packet. This page let you setup them. We use mnemonic nouns to describe the specific ALGs. The checked entries will be enabled by the ALG processing. For the Non-Standard FTP
  • LevelOne VOI-8003 | Manual - Page 97
    DMZ Check this item to enable DMZ service. DMZ table This table lets you configure the DMZ hosts. If you have more than one public IP Addresses, you can specify each one with
  • LevelOne VOI-8003 | Manual - Page 98
    4.2.8.4 Firewall Firewall Options Enable Hacker Attack Protect The hackers always try to break into you system or crack down your network. The gateway provides hacker attack protect modules to protect your home network. Discard PING from WAN side "Ping" is the most widely used tool to diagnose the
  • LevelOne VOI-8003 | Manual - Page 99
    /UDP port (113). If you drop it, the Linux email servers will not allow you to log into. Allow it can solve such kind of problem. Discard NetBios Packets The NetBios protocol is widely used by the MS Windows Network Place, which should only be use in the home network and
  • LevelOne VOI-8003 | Manual - Page 100
    Client Filtering Enable Client Filter Check this box and all the entries below will take effect. IP Block the IP addresses ranged to connect to Internet. Port Set the port range, within which is not allowed to connect to Internet. Type Set which protocol, TCP/IP/Both, of this entry to inhibit. Block
  • LevelOne VOI-8003 | Manual - Page 101
    URL Filtering Enable URL Filter Check this box and all the entries below will take effect. IP The IP addresses ranged will be the candidate to check the URL when they use web browser to access the Internet. URL filter string The specific URL string to block. Enable Check this item to enable this URL
  • LevelOne VOI-8003 | Manual - Page 102
    MAC Address Control Check this item to enable MAC control service. Filter out or only accept the following MAC address connect can select one of the MAC addresses recorded by the home gateway or enter the new entry manually. Add Click this button, a new entry will be added to the MAC Control table.
  • LevelOne VOI-8003 | Manual - Page 103
    4.2.8.5 Routing Routing Table This field indicates the destination IP of this route entry. Subnet Mask This field indicates the Subnet Mask of this route. Gateway If a packet's destination IP address do "bit and" operation with the "Subnet Mask" equals to the "Destination LAN IP", the packet will
  • LevelOne VOI-8003 | Manual - Page 104
    Static Routing Destination LAN IP This field indicates the destination IP of this route entry. Subnet Mask This field indicates the Subnet Mask of this route. Gateway If a packet's destination IP address do "bit and" operation with the "Subnet Mask" equals to the "Destination LAN IP", the packet
  • LevelOne VOI-8003 | Manual - Page 105
    4.2.8.6 UPnP Settings UPnP Enable UPnP Check this item to enable UPnP. UPnP Port Number Set UPnP port number to announce to the UPnP control points. The UPnP control points use this TCP port to send request to the home gateway. Advertise Time (60-1800) Set the time interval after which the home
  • LevelOne VOI-8003 | Manual - Page 106
    Port Mapping Remote Host This field lists remote host that connect to LAN client. External Port This field lists the port of the remote host connect to LAN client. Internal Client This field lists LAN client connect to the Internet. Internal Port This field lists port of LAN client connect to the
  • LevelOne VOI-8003 | Manual - Page 107
    4.2.8.7 DDNS Enabled Check this item to enable the DDNS settings Disabled Check this item to disable the DDNS settings Host Name Set your host name that need to do DDNS update. DDNS Server Set the DDNS server that updates your IP address. User Name The DDNS server requires you to supply a name and
  • LevelOne VOI-8003 | Manual - Page 108
    4.2.9 Backup/Restore 4.2.9.1 Configuration /Backup-Restore/Configurations/ This page let you backup / Restore all of your configuration parameters on the VoIP Gateway. It is very good idea to back up all of your VoIP Gateway configuration parameters after install. a. To Backup, press Download
  • LevelOne VOI-8003 | Manual - Page 109
    4.2.9.2 VoIP Module /System Maintenance/Backup-Restore/Configurations/ This page displays the current firmware module version and let you backup / Restore all of your VoIP firmware module on the VoIP Gateway. Please use this page to update the VoIP module firmware if necessary. a. To Restore from
  • LevelOne VOI-8003 | Manual - Page 110
    4.2.9.3 Reboot System /Reboot System Use the Reboot button on this page to reboot your VoIP Gateway, before you reboot, please make sure you have to press the Saved modification to save your current configuration to Flash ROM, otherwise all the change will be disappear after reboot. 110
  • LevelOne VOI-8003 | Manual - Page 111
    4.2.10 Save Modification /Save Modification/ Most of the VoIP Gateway parameters will take effective after you modify, but it is just temporary stored on RAM only, it will disappear after your reboot or power off the VoIP Gateway, to save the parameters into Flash ROM and let it take effective
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
1
VOI-8001
VOI-8002
VOI-8003
8-Port H.323/SIP VoIP Gateway
User Manual
Ver. 1.00-0608