LevelOne WAP-0008 Manual

LevelOne WAP-0008 Manual

Get LevelOne WAP-0008 PDF manuals and user guides View all LevelOne WAP-0008 manuals
Add to My Manuals
Save this manual to your list of manuals

LevelOne WAP-0008 manual content summary:

  • LevelOne WAP-0008 | Manual - Page 1
    LevelOne WAP-0008 11g Wireless AP Storage w/ STAT/IDE Interface User Manual V1.0
  • LevelOne WAP-0008 | Manual - Page 2
    26 2.3.1 Accessing the Network Hard Drive via My Network Places....... 26 2.3.2 Searching the Computers 26 2.3.3 Search the "Entire Network" Manually 27 2.3.4 Accessing Files via FTP 28 CHAPTER 3: MAKING CONFIGURATION 29 3.1 CONFIGURATION WIZARD 31 3.2 NETWORK SETTINGS 46 3.2.1 DHCP Setting
  • LevelOne WAP-0008 | Manual - Page 3
    TOOLS 92 5.1 BACKUP CONFIGURATION 93 5.2 RESET CONFIGURATION TO DEFAULT 93 5.3 REBOOT 93 5.4 FIRMWARE UPGRADE 94 CHAPTER 6: DOWNLOAD ASSISTANT 95 7.3 SYSTEM LOG 104 CHAPTER 8: FAQ & TROUBLE SHOOTING 105 8.1 WHAT CAN I DO WHEN I HAVE SOME TROUBLE 105 8.2 HOW TO SETUP WIRELESS FUNCTION 108
  • LevelOne WAP-0008 | Manual - Page 4
    8.4 HOW TO BACKUP DATA BY USING MICROSOFT BACKUP UTILITY 121 APPENDIX A: LICENSING INFORMATION 128 REGULATORY APPROVALS 138 NOTE: THE CONTENT OF THIS MANUAL WILL BE REVISED WITHOUT PRIOR NOTICE. 4
  • LevelOne WAP-0008 | Manual - Page 5
    , and is easy to configure and operate even for non-technical users. Instructions for installing and configuring this product can be found in this manual. Before you install and use this product, please read this manual carefully for fully exploiting the functions of this product. 1.1 Overview The
  • LevelOne WAP-0008 | Manual - Page 6
    The Network Storage supports the UPnP content directories and users can share the music and video files easily. Besides, the click-and-copying of files from a flash drive to the Network Storage hard disk make the user backup files efficiently. Please refer to the following application diagram. 6
  • LevelOne WAP-0008 | Manual - Page 7
    read from NTFS file system.  Support security level as Guest or Authorization user for file sharing.  Real time clock to synchronize the computer time setting.  Easy to upgrade: using web browser or windows application to upgrade new version of firmware.  Browser-based interface configuration
  • LevelOne WAP-0008 | Manual - Page 8
    in 802.11g mode; 1/2/5.5/11Mbps in 802.11b mode.  Support 64/128-bit WEP encryption.  Support 802.1X authentication.  Support WPA, WPA-PSK with TKIP and AES encryption.  Support WPA2, WPA2-PSK with TKIP and AES encryption.  Support Client, AP, WDS, and WDS Hybrid wireless modes. (NOTE. Only
  • LevelOne WAP-0008 | Manual - Page 9
    have the following minimum requirements:  Windows 98SE / ME / 2000 / XP, or any other operating system can support Samba.  An Ethernet (10BaseT or 10/100BaseT) adapter for wired client.  At least one WLAN client adapter of 802.11g (54Mbps) or 802.11b (11Mbps) for wireless connection.  TCP/IP and
  • LevelOne WAP-0008 | Manual - Page 10
    1.4 Package List The Network Storage package contains the following items:  WAP-0008  Power Adapter  Stand  Dipole Antenna  CD Manual/Utility  Quick Installation Guide 10
  • LevelOne WAP-0008 | Manual - Page 11
    1.5 Hardware Configuration Antenna LAN Port USB 2.0 Port Power Switch Power Jack Stand LED Indicators Shutdown Button Backup Button Reset Button 11
  • LevelOne WAP-0008 | Manual - Page 12
    LED Indicators: LED Power W.LAN LAN HDD R/W HDD Status USB 1 USB 2 Status (Backup) Light Off Solid Light Power off Power on No packet No device Linked Not in use HDD read/write No HDD HDD full or error No device USB drive ready No device USB drive ready Blinking On transmitting On transmitting.
  • LevelOne WAP-0008 | Manual - Page 13
    Shutdown" and "Backup" simultaneously for 6 seconds to reset the system setting to factory default. Rear Ports: Ports must insert to card reader first before connect to the storage device. * Storage device supports one memory card at a time. Please do not insert multiple memory cards into the card
  • LevelOne WAP-0008 | Manual - Page 14
    Chapter 2: Getting Started 2.1 Hard Disk Installation Follow the steps below to insert the 3.5" hard disk and assemble the device before using the Network Storage. WARNING: The Network Storage is not hot-swappable. Please make sure that it is turned off and not connected to the power outlet when
  • LevelOne WAP-0008 | Manual - Page 15
    the 3.5" IDE or SATA hard disk into the slot, and connect proper data (the red cable is used for SATA hard disk and the gray one is for IDE hard disk) and power cable to the hard disk. Then fasten the screws that are included in the package to fix hard
  • LevelOne WAP-0008 | Manual - Page 16
    Step 4: Put the front panel back. Step 5: Put the back cover back, and assemble tightly. Finally, fasten two screws. 16
  • LevelOne WAP-0008 | Manual - Page 17
    2.2 Making Connections In order to access the Network Storage as the network storage drive or as a wireless AP, you need to configure the TCP/IP settings correctly in advance. Either the "Wired Ethernet Connection" or "Wireless Connection" can be used to connect to Network Storage. 2.2.1 Install
  • LevelOne WAP-0008 | Manual - Page 18
    You may see there are many connections in your computer. Just select one which you will use it to connect to Network Storage. Then choose the as Linux, X-window or Mac OS, please refer to original manual of your OS to finish the configurations of TCP/IP and other required communication protocols. 18
  • LevelOne WAP-0008 | Manual - Page 19
    2.2.2 Wired Ethernet Connection Use one Ethernet cable to connect the Network Storage and your computer directly. Then power on the Network Storage. Ethernet cable The Network Storage will detect automatically
  • LevelOne WAP-0008 | Manual - Page 20
    Protocol (TCP/IP) Properties from My Network Places and check the Properties of Local Area Network Connection. Choose "Use the following IP address", and assign one IP address which can be from 192.168.123.1 to 192.168.123.253. Here we use the 192.168.123.88 as the IP
  • LevelOne WAP-0008 | Manual - Page 21
    previous settings. If same, you are successful to setup the network configuration. There are three methods to configure Network Storage. Please refer to the following instructions, and choose one which is most convenient to you. 21
  • LevelOne WAP-0008 | Manual - Page 22
    . NOTE. The default login password is "admin". If there is any DHCP server in the network, Network Storage will be as the client and get one IP address from existed DHCP server. You can also use configuration utility to Query to find the IP address that Network Storage gets. About other
  • LevelOne WAP-0008 | Manual - Page 23
    default IP address is "192.168.123.254". Method 3: Use "My Network Places" to Search and Setup First, go to My Network Places and search "WAP-0008". NOTE. The default host name of Network Storage is
  • LevelOne WAP-0008 | Manual - Page 24
    Network Storage in a wireless environment. We assume that there is at least one WLAN card installed on your computer, and Network Storage is powered on. the WAP-0008 in the available network list, then select the WAP-0008, and click Connect button to connect. Otherwise, if you can't find WAP-0008,
  • LevelOne WAP-0008 | Manual - Page 25
    Step 2: Then go to command prompt mode from Start Menu->Programs-> Accessories. Type "ipconfig" in the command prompt window and press the "Enter". Then the messages of IP address, Subnet Mask, and Default Gateway should be found. Step 4: After you connect to Network Storage successfully, you can
  • LevelOne WAP-0008 | Manual - Page 26
    start using the network hard drive. 2.3.1 Accessing the Network Hard Drive via My Network Places Select the "My Network Places" and type the address of "\\WAP-0008" and press "Enter". Then you will find the Storage icon. Click the "Storage" icon, and you will find the "C" folder as below. The folder
  • LevelOne WAP-0008 | Manual - Page 27
    2.3.3 Search the "Entire Network" Manually Open Windows Explorer, and then click the My Network Places icon. Double click the Entire Network to view the components Windows Network icon, then the various network components showed in the list. The default workgroup of Network Storage is LevelOne. 27
  • LevelOne WAP-0008 | Manual - Page 28
    via FTP The Network Storage offers FTP service for the clients which don't support Microsoft Windows File sharing. You can use any FTP client utility to connect to Network Storage with anonymous username and password (username: ftp, and without password) when the Security Level is set to "Guest mode
  • LevelOne WAP-0008 | Manual - Page 29
    Chapter 3: Making Configuration The Network Storage can be configured various settings through the proprietary Configuration Tool or general web browser. Even you don't know which IP is being used by Network Storage; the Configuration Tool will help you to find it. All you have to do is click the "
  • LevelOne WAP-0008 | Manual - Page 30
    When you enter the configuration mode, you are requested to provide the "System Password" to activate the configurations. The default login password is "admin". After login, you could see these buttons: Press "Wizard" button if you want to do basic settings with simpler way. (Please check section
  • LevelOne WAP-0008 | Manual - Page 31
    3.1 Configuration Wizard With wizard setting steps, you could configure Network Storage in a very simple way. This configuration wizard includes settings of Language, IP & DHCP, Wireless, Time, and Disk. Press "Next" button to start configuration. 31
  • LevelOne WAP-0008 | Manual - Page 32
    Step 1: Select which language will be used for folder/file name in the hard disk. Incorrect language setting may cause folder/file name unreadable. 32
  • LevelOne WAP-0008 | Manual - Page 33
    Step 2: If you don't know how to set DHCP option, just keep it as Auto. 33
  • LevelOne WAP-0008 | Manual - Page 34
    If you choose Server/Auto/Static mode, you need to set some TCP/IP settings for Network Storage. If you are not sure about these values, please ask your network administrator or ISP. 34
  • LevelOne WAP-0008 | Manual - Page 35
    Step 3: Choose which wireless mode that you want to use. You can also disable wireless feature of Network Storage. 35
  • LevelOne WAP-0008 | Manual - Page 36
    If you choose AP Only Mode, in next page, you could specify the SSID and the wireless channel number for Network Storage. 36
  • LevelOne WAP-0008 | Manual - Page 37
    If you select the Wireless Client Mode, in next page, you would have to specify the AP that you want Network Storage to connect to. 37
  • LevelOne WAP-0008 | Manual - Page 38
    You have two ways to do this job. One is searching the available AP that Network Storage could get. 38
  • LevelOne WAP-0008 | Manual - Page 39
    After finish searching, you could select the AP that you want Network Storage to connect to. 39
  • LevelOne WAP-0008 | Manual - Page 40
    The other way to add an AP is setting the SSID manually. 40
  • LevelOne WAP-0008 | Manual - Page 41
    three ways to set time for Network Storage. You could sync time with NTP server or your PC, or set time manually. Step 5: Here you will see three options of security level. The "Guest Mode" means everyone can access any data in your hard disk drive. The "Authorization Mode" means only authorized
  • LevelOne WAP-0008 | Manual - Page 42
    select "Yes". If you already have data in this hard disk, you might want to select "No". This option would format your hard disk to one partition if you select "Yes". NOTE. You can get better performance after disk initialization. 42
  • LevelOne WAP-0008 | Manual - Page 43
    in their home directory in the private directory. Please indicate capacities for public directory and private directory separately. After you indicate capacity for one directory, the rest of capacity can be assign to the other directory automatically. NOTE. The easy copy button in the front panel is
  • LevelOne WAP-0008 | Manual - Page 44
    WARNING: The initialization will erase all your data which has been stored in the hard disk. Step 6: This page will show the configurations that you choose, please check your settings again before saving. Click "Discard Settings", then you would return to the first page and without saving any
  • LevelOne WAP-0008 | Manual - Page 45
    If you choose to initialize or format hard disk, please wait the progressing bar become 100%. WARNING: Do Not press any button or power off the Network Storage when the format is in progress. After everything is done, system would reboot automatically. Please wait 30 seconds at least for system
  • LevelOne WAP-0008 | Manual - Page 46
    3.2 Network Settings 3.2.1 DHCP Setting Following sections describe the various DHCP settings.  General Settings: default machine IP is 192.168.123.254. This IP address must be unique on your network. You can change it if necessary. This setting is only used for DHCP server mode, and Static IP mode
  • LevelOne WAP-0008 | Manual - Page 47
    mask assignment. If there is no DHCP server on the network, the Network Storage will become a DHCP server on the network.  Static: You can manually configure the IP address and subnet mask of Network Storage.  Server Settings: (This information would be used when you choose Server mode or Static
  • LevelOne WAP-0008 | Manual - Page 48
     Fixed Mapping: DHCP server can assign the same IP address to a certain "MAC address". 3.2.2 Wireless Setting Select the Wireless option in the Network Settings page. Following information will let you know the current wireless operation status.  Basic Settings: allow you to enable or disable
  • LevelOne WAP-0008 | Manual - Page 49
    Choose the wireless mode you need, and click "Next" button to setup detail items. 3.2.2.1 AP Only Mode When you are in the AP Only mode, you can setup the basic wireless functions as below. 49
  • LevelOne WAP-0008 | Manual - Page 50
    LAN. Before associating with a particular wireless LAN, a station must have the same SSID as the access point. The default SSID setting is "WAP-0008".  Authentication: authentication ensures that digital data transmissions are delivered to the intended receiver. This option enables you to set the
  • LevelOne WAP-0008 | Manual - Page 51
     802.1X: IEEE 802.1x authentication can be done by using an external RADIUS server. You need to input the IP address of RADIUS server and Shared Secret. Please refer to FAQ in chapter 8 to get more detailed information. 51
  • LevelOne WAP-0008 | Manual - Page 52
     WPA-PSK, WPA2-PSK: AP and Client need to use identical Pre-shared key (PSK). Please choose TKIP or AES for encryption type, and then input 64 Hex key (0~F) or 8~63 ASCII characters. 52
  • LevelOne WAP-0008 | Manual - Page 53
    input the IP address of RADIUS server and Shared Secret. Please refer to FAQ in chapter 8 to get more detailed information. NOTE. This device can support WPA version 1 and version 2. 53
  • LevelOne WAP-0008 | Manual - Page 54
    54
  • LevelOne WAP-0008 | Manual - Page 55
    Advanced Setting:  Wireless mode: 11b/g mixed can let 11g or 11b computers both exist on the network, but the speed will be reduced. Select 11g only for maximum speed, but no 11b users will be allowed on the network.  Beacon interval: This represents the amount of time between beacon transmissions
  • LevelOne WAP-0008 | Manual - Page 56
     RTS Threshold: The RTS threshold specifies the packet size of an RTS transmission. This helps control traffic flow through an access point, especially one with many clients. The setting value range is from 1 to 2347, and default value is set to 2347.  Fragmentation: In a network, the maximum size
  • LevelOne WAP-0008 | Manual - Page 57
    The default setting is "Disable MAC filtering", every wireless client could connect to this Network Storage. When you select "ALL accept", the wireless clients with the MAC addresses you enter below will be accepted to connect to this Network Storage, the others will be rejected. When you select "
  • LevelOne WAP-0008 | Manual - Page 58
    3.2.2.2 Wireless Client Mode Select the "Wireless Client mode" and click "Next" button to setup under the Wireless client mode. After entering the Wireless client mode setting, click the "Scan AP" to scan the existing AP in your environment. Then click the AP that you want to connect to. NOTE. If
  • LevelOne WAP-0008 | Manual - Page 59
    Input encryption keys if needed. Then press "Connect" button to connect. NOTE. The encryption method is decided by remote AP. 59
  • LevelOne WAP-0008 | Manual - Page 60
    Then Network Storage will save configurations and reboot automatically. After that, you can check the wireless status in the status page. 60
  • LevelOne WAP-0008 | Manual - Page 61
    Besides selecting AP from available list, you can also add AP manually. Press "Advanced Setting" in the wireless configuration page. 61
  • LevelOne WAP-0008 | Manual - Page 62
    Press "Add" button to add a remote AP. 62
  • LevelOne WAP-0008 | Manual - Page 63
    Input the SSID information of remote AP. You may also need to input correct encryption keys when remote AP activates encryption mechanism. Then press "Save" to save the configuration. 63
  • LevelOne WAP-0008 | Manual - Page 64
    You can also modify attributes of existed AP. Go to wireless "Advanced Setting" page, choose the AP that you want to modify, then press "Edit" button. 64
  • LevelOne WAP-0008 | Manual - Page 65
    When you finish all the modification, press "Save" button to save changes. 65
  • LevelOne WAP-0008 | Manual - Page 66
    3.2.2.3 WDS Hybrid Mode Select the "WDS Hybrid mode" and click "Next" to set up. 66
  • LevelOne WAP-0008 | Manual - Page 67
    After entering the WDS Hybrid mode setting, click "Add" to set up. 67
  • LevelOne WAP-0008 | Manual - Page 68
    You can select the remote AP from AP list, or you can also input the MAC address of remote AP manually. NOTE. The channel of Network Storage and remote AP must be the same. 68
  • LevelOne WAP-0008 | Manual - Page 69
    After indicating MAC address of remote AP, press "Next" to continue. 69
  • LevelOne WAP-0008 | Manual - Page 70
    Input information of wireless channel, SSID, and encryption method of Network Storage. Press "Next" to continue. NOTE. The wireless channel must be same as remote AP. 70
  • LevelOne WAP-0008 | Manual - Page 71
    You can keep the original setting of this page, and then press "Next". NOTE. Please refer to 3.2.2.1 to review the meanings of this page. 71
  • LevelOne WAP-0008 | Manual - Page 72
    Edit wireless MAC Filtering setting, and then press "Next". NOTE. Please refer to 3.2.2.1 to review the meanings of this page. 72
  • LevelOne WAP-0008 | Manual - Page 73
    Finally, you could see the confirm page. If every setting is correct, just press "Confirm" to save all configurations. 73
  • LevelOne WAP-0008 | Manual - Page 74
    3.2.2.4 WDS Only Mode Select the "WDS only mode", and click "Next" to set up. 74
  • LevelOne WAP-0008 | Manual - Page 75
    After entering the WDS Only mode setting, click "Add" to set up. 75
  • LevelOne WAP-0008 | Manual - Page 76
    You can select the remote AP from AP list, or you can also input the MAC address of remote AP manually. NOTE. The channel of Network Storage and remote AP must be the same. 76
  • LevelOne WAP-0008 | Manual - Page 77
    After indicating MAC address of remote AP, press "Next" to continue. 77
  • LevelOne WAP-0008 | Manual - Page 78
    Input information of wireless channel and encryption method of Network Storage. Then press "Next" to continue. NOTE. The wireless channel must be same as remote AP. 78
  • LevelOne WAP-0008 | Manual - Page 79
    Finally, you could see the confirm page. If every setting is correct, just press "Confirm" to save all configurations. 79
  • LevelOne WAP-0008 | Manual - Page 80
    Chapter 4: Storage Configuration In this section, you will know how to use the "Disk Utility" to configure the hard disk setting. Besides, this chapter will also show you how to finish configuration of File Sharing, and assign user access rules. 4.1 Disk Utility Before using the hard disk, users
  • LevelOne WAP-0008 | Manual - Page 81
    The other option is used for file checking. If you power off Network Storage before normally shut down the system, you are recommended to do this by pressing "Check" button. Click "Disk fdisk" for entering FDisk Utility to create new partition. NOTE: Partition can only be created under Authorization
  • LevelOne WAP-0008 | Manual - Page 82
    Create a new partition You could also format your hard disk by using FDISK Utility. WARNING: All data in the hard disk will be ERASED after pressing format button. The hard disk is formatted to Ext2 file system. It can not be connected directly to a Microsoft Windows system without reformatting to
  • LevelOne WAP-0008 | Manual - Page 83
    by default, so you can also access Network Storage by any FTP client utility. Besides, you can also set the maximum concurrent connections of FTP service. The maximum concurrent connections of FTP are limited to 20. 83
  • LevelOne WAP-0008 | Manual - Page 84
    84
  • LevelOne WAP-0008 | Manual - Page 85
    . One is Guest mode; it means anyone can access any data which has been stored in the hard disk. With Guest mode, you don't need to edit any user configuration and start to enjoy file sharing. Note. The security level here is applied to file sharing of Microsoft Network Places and FTP service
  • LevelOne WAP-0008 | Manual - Page 86
    The other is Authorization mode, it means only authorized people can access certain folders in the hard disk. With Authorization mode, you need to edit user configuration to assign access right to privileged users. Besides, you can also assign quota limit for every user in the authorization mode.
  • LevelOne WAP-0008 | Manual - Page 87
    information, just press "Add" button to add user account. Note. The user information here is applied to file sharing of Microsoft Network Places and FTP service. Besides, you can also check the status of used capacity for every user by entering new quota then pressing "Modify" button. 87
  • LevelOne WAP-0008 | Manual - Page 88
    How to access folders in Authorization mode If you have added a user account (named user1), then you will find the following folders when you browse Network Storage by My Network Places in authorization mode. With this scenario, everyone can access data which is stored in folder Public and usb_disk.
  • LevelOne WAP-0008 | Manual - Page 89
    89
  • LevelOne WAP-0008 | Manual - Page 90
    4.4 File Browser The Network Storage provides a file browser to let users rename and delete folders/files easily. Especially when users can not rename or delete folder/file via FTP or Microsoft My Network Places successfully. For an example, users may download an "unrecognized" file, such as $#@*2$.
  • LevelOne WAP-0008 | Manual - Page 91
    Step 3: Or press the "Rename" button if you want to rename the file name. The field of "Current File" will become editable when pressing "Rename" button. After inputting a new file name, just press "Confirm" button to finish changing. 91
  • LevelOne WAP-0008 | Manual - Page 92
    Chapter 5: Advanced Tools Click the Advanced Tools option on the left panel to display its submenus. The Advanced Tools menus enable you to configure the various system settings. Refer to the following sections for more details. 92
  • LevelOne WAP-0008 | Manual - Page 93
    5.1 Backup Configuration This option enables you to backup current settings of Network Storage. 5.2 Reset Configuration to Default This option enables you to reset the Network Storage to its default factory settings. 5.3 Reboot This option enables you to reboot the device. 93
  • LevelOne WAP-0008 | Manual - Page 94
    5.4 Firmware Upgrade This option enables you to upgrade new firmware, or restore backup configuration to this product. 94
  • LevelOne WAP-0008 | Manual - Page 95
    Chapter 6: Download Assistant With Download Assistant, you can download files from remote server without using any computer. The one thing you need to do is adding a download task in the configuration page. Besides, you can also set a schedule rule to indicate which time the
  • LevelOne WAP-0008 | Manual - Page 96
    that remote FTP server uses. Save To: Indicate which folder you will save the file in the hard disk. You can type the file path manually or press Browse button to select the destination folder. Press OK button when you finish the selection. 96
  • LevelOne WAP-0008 | Manual - Page 97
    Login method: The login method is decided by remote FTP server. You can choose anonymous login or input authorized user name and password. Inform Receiver: This option is used for mail alert. This device will send a mail to inform the receiver when the file is downloaded completely. You need to
  • LevelOne WAP-0008 | Manual - Page 98
    remote HTTP server. Please refer to the following description. Name: Name of download task. URL: IP address and file path of remote HTTP server. (e.g. http://software.yahoo.com/file1.avi) Save To: Indicate which folder you will save the file in the hard disk. You can type the file path
  • LevelOne WAP-0008 | Manual - Page 99
    Inform Receiver: This option is used for mail alert. This device will send a mail to inform the receiver when the file is downloaded completely. You need to indicate the SMTP server, and mail address of receiver. Use ";" to separate different mail addresses. Start Time: The download task can be
  • LevelOne WAP-0008 | Manual - Page 100
    : Please enter an E-mail address that will be used as the sender of e-mail alert feature. Note. Some mail servers would refuse the mail relay service if the sender isn't on the same mail server. SMTP Server Address: Please enter the IP address or domain name of mail server that you
  • LevelOne WAP-0008 | Manual - Page 101
    6.4 Download Status This page displays detailed status of configured download task in Network Storage. The Running page contains all download tasks that are running. The Waiting page contains download tasks that are ready to run, but the number of current connections is over the maximum limit. So
  • LevelOne WAP-0008 | Manual - Page 102
    with Internet NTP server. Set Date and Time using PC's Date and Time: synchronize the date and time with the computer. Set Date and Time manually: Manually setting up the date and time. 102
  • LevelOne WAP-0008 | Manual - Page 103
    7.2 Login Setting Administrator Timeout: If users login, and idles for a period of time (the default value is 600 seconds), then that user will be logged out automatically. Set this value to "0" to disable this feature. Change Password: To change the login password, you have to enter the old
  • LevelOne WAP-0008 | Manual - Page 104
    7.3 System Log Logs are useful for troubleshooting, and you can review the whole system logs here. There are four categories of logs: System Log, Wireless, Samba, and FTP. 104
  • LevelOne WAP-0008 | Manual - Page 105
    Shooting 8.1 What can I do when I have some trouble? 1. How do I connect to Network Storage? A: Please prepare one RJ45 cable and connect the LAN port directly. The Network Storage already supports MDI/MDIX. 2. How to "Reset settings to default"? A: Press the buttons of "Shutdown" and "Backup
  • LevelOne WAP-0008 | Manual - Page 106
    the Status LED or HDD LED. If normal, they will be flash. Otherwise, reset the settings to factory default and try it again. 6. I can not save the your hard disk. This problem will occur if the file system is FAT or FAT32. Convert file system to Ext2 can solve this problem. The format utility of
  • LevelOne WAP-0008 | Manual - Page 107
    This is because Windows system caches the previous login records, so that user can not use another account to login this device. To solve this problem, please disconnect previous network drive first. After deleting previous record, please try to login again. 107
  • LevelOne WAP-0008 | Manual - Page 108
    8.2 How to setup wireless function? 1. How can I use the wireless function? A: Generally speaking, there are four modes to setup in this device. The most common function is "AP mode". The user can make this device as a wireless AP device as follows. AP mode: First, the wireless client sets up the
  • LevelOne WAP-0008 | Manual - Page 109
    reference. First, check which channel you want to use. We choose channel 10 for the example. Scan other AP which channel is 10 and also supports WDS function. Second, add the wireless MAC address of Network Storage in this Wireless Router # 2. (Figure2). And use Scan AP to find the wireless which
  • LevelOne WAP-0008 | Manual - Page 110
    Figure 1: 110
  • LevelOne WAP-0008 | Manual - Page 111
    Figure 2: 111
  • LevelOne WAP-0008 | Manual - Page 112
    WDS Hybrid mode: This device also supports WDS and AP mode at the same time. How to configure this in your environment? The below figure is for your reference. For the WDS setting, please refer to the above WDS only mode. For AP setting, please refer to the AP mode. 112
  • LevelOne WAP-0008 | Manual - Page 113
    to configure 802.1x or WPA with RADIUS server? NOTE. Windows 2000 RADIUS server only supports PEAP after upgrade to service pack 3 and HotFix Q313664 (You can get more information from http://support.microsoft.com/default.aspx?scid=kb; en-us;313664) DUT Configuration: 1. Enable DHCP server. 2. WAN
  • LevelOne WAP-0008 | Manual - Page 114
    on PC  Choose the IEEE 802.1X as the authentication method. (Figure 2) NOTE. Figure 2 is a setting picture of Windows XP without service pack 1. If users upgrade to service pack 1, then they can't see MD5-Challenge from EAP type list any more, but they will get a new Protected EAP (PEAP) option
  • LevelOne WAP-0008 | Manual - Page 115
     Choose MD5-Challenge or Smart Card or other Certificate as the EAP type.  If choose to use smart card or the certificate as the EAP type, we select to use certificate on this computer.  We will change EAP type to fit the variable test condition. 115
  • LevelOne WAP-0008 | Manual - Page 116
    Figure 2: Enable IEEE 802.1X access control  Windows 2000 RADIUS server Authentication testing: 1. DUT authenticate PC1 using certificate. (PC2 follows the same test procedures.) 2. Download and install the certificate on PC1. (Figure 3) 3. PC1 choose the SSID of DUT as the Access Point. 4. Set
  • LevelOne WAP-0008 | Manual - Page 117
    Figure 3: Certificate information on PC1 Figure 4: Authenticating 117
  • LevelOne WAP-0008 | Manual - Page 118
    Figure 5: Authentication success  DUT authenticate PC2 using PEAP-TLS. 1. PC2 choose the SSID of DUT as the Access Point. 2. Set authentication type of wireless client and RADIUS server both to PEAP_TLS. 3. Disable the wireless connection and enable again. 4. The DUT will send the user's
  • LevelOne WAP-0008 | Manual - Page 119
    appear when you launch My Computer in Windows. Step 1: Search Network Storage in Windows My Network Places. The default host name of Network Storage is WAP-0008. Step 2: After find the Network Storage, double click on the icon. Right click on the folder which you want to map, and choose Map Network
  • LevelOne WAP-0008 | Manual - Page 120
    Step 4: After finish drive mapping, you can find an additional Z drive in My Computer group. Then you can access network drive via Z drive, and don't need to search network drive every time. 120
  • LevelOne WAP-0008 | Manual - Page 121
    8.4 How to backup data by using Microsoft backup utility? The backup utility is installed and ready for use if you use Windows XP Professional edition. Otherwise, if you use Windows XP Home edition, please install Ntbackup.msi from Windows installation CD first. 121
  • LevelOne WAP-0008 | Manual - Page 122
    Step 1: Please refer to 8.3 to map a network drive of Network Storage first. Then start Windows backup utility, and press next button to continue. 122
  • LevelOne WAP-0008 | Manual - Page 123
    Step 2: Here we choose "Back up files and settings". 123
  • LevelOne WAP-0008 | Manual - Page 124
    Step 3: Choose "Let me choose what to back up". 124
  • LevelOne WAP-0008 | Manual - Page 125
    Step 4: Choose which folder will be backup to Network Storage. 125
  • LevelOne WAP-0008 | Manual - Page 126
    Step 5: Choose the destination that you will save files. Here we choose drive Z, which is a network drive of Network Storage. 126
  • LevelOne WAP-0008 | Manual - Page 127
    Step 6: Finally, press Finish button to start backup right now. Otherwise, press Advanced button to set a schedule rule for this backup task. 127
  • LevelOne WAP-0008 | Manual - Page 128
    this license. The following parts of this product are subject to the GNU GPL, and those software packages are copyright by their respective authors.  Linux-2.4.28 system kernel  busybox_1_00_rc2  bridge- or other open source code in this software on a physical CD medium, LevelOne (Digital Data 128
  • LevelOne WAP-0008 | Manual - Page 129
    Communications) offers to mail this CD to you upon request, for a price of US$9.99 plus the cost of shipping. 129
  • LevelOne WAP-0008 | Manual - Page 130
    are referring to freedom, not price. Our General Public Licenses are designed to make sure that you have the freedom to distribute copies of free software (and charge for this service if you wish), that you receive source code or can get it if you want it, that you can change the
  • LevelOne WAP-0008 | Manual - Page 131
    recipients to know that what they have is not the original, so that any problems introduced by others will not reflect on the original authors' reputations. Finally, any free program is threatened constantly by software patents. We wish to avoid the danger that redistributors of a free program will
  • LevelOne WAP-0008 | Manual - Page 132
    such program or work, and a "work based on the Program" means either the Program or any derivative work under copyright law: that is to say, a work containing the Program or a portion of it, either verbatim or with modifications and/or translated into another language. (Hereinafter, translation is
  • LevelOne WAP-0008 | Manual - Page 133
    the terms of Sections 1 and 2 above provided that you also do one of the following: a) Accompany it with the complete corresponding machine-readable source terms of Sections 1 and 2 above on a medium customarily used for software interchange; or, b) Accompany it with a written offer, valid for at
  • LevelOne WAP-0008 | Manual - Page 134
    The source code for a work means the preferred form of the work for making modifications to it. For an executable work, complete source code means all the source code for all modules it contains, plus any associated interface definition files, plus the scripts used to control compilation and
  • LevelOne WAP-0008 | Manual - Page 135
    as if written in the body of this License. 9. The Free Software Foundation may publish revised and/or new versions of the General Public License spirit to the present version, but may differ in detail to address new problems or concerns. Each version is given a distinguishing version number. If the
  • LevelOne WAP-0008 | Manual - Page 136
    software which is copyrighted by the Free Software Foundation, write to the Free Software Foundation; we sometimes make exceptions for this. Our decision will be guided THE PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION. 12. IN NO EVENT UNLESS REQUIRED
  • LevelOne WAP-0008 | Manual - Page 137
    END OF TERMS AND CONDITIONS 137
  • LevelOne WAP-0008 | Manual - Page 138
    EN60950 CE Marking Warning Hereby, Digital Data Communications, declares that this (Model-no. WAP-0008) is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. The CE-Declaration of Conformity can be downloaded at: http://www.levelone.eu/support.php 138
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
LevelOne
WAP-0008
11g Wireless AP Storage w/ STAT/IDE
Interface
User Manual
V1.0