LevelOne WBR-6003 Manual

LevelOne WBR-6003 Manual

Get LevelOne WBR-6003 PDF manuals and user guides View all LevelOne WBR-6003 manuals
Add to My Manuals
Save this manual to your list of manuals

LevelOne WBR-6003 manual content summary:

  • LevelOne WBR-6003 | Manual - Page 1
    LevelOne User Manual WBR-6003 150Mbps N Wireless Router Ver. 2.0
  • LevelOne WBR-6003 | Manual - Page 2
    the instruction manual. The user could user is encouraged to try to correct the interference by one WBR-6003) is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. The CE-Declaration of Conformity can be downloaded at: http://www.levelone.eu/support
  • LevelOne WBR-6003 | Manual - Page 3
    at http://global.level1.com. If you would like a copy of the GPL or other open source code in this software on a physical CD medium, LevelOne (Digital Data Communications) offers to mail this CD to you upon request, for a price of US$9.99 plus the cost of shipping. 3
  • LevelOne WBR-6003 | Manual - Page 4
    1. INTRODUCTION ...5 USER MANUAL OVERVIEW ...5 2. Firmware Upgrade...68 Backup Setting...68 Reset to Default ...68 Reboot ...68 Miscellaneous ...69 TECHNICAL SPECIFICATIONS...80 Default Settings IP Address Password Wireless Mode Wireless SSID Wireless Security 192.168.1.1 admin Enable LevelOne
  • LevelOne WBR-6003 | Manual - Page 5
    on your purchase of LevelOne WBR-6003 150Mbps N Wireless Router. This product is specifically designed for Small Office and Home Office needs. It provides a complete SOHO solution for Internet surfing, and is easy to configure and operate even for non-technical users. Instructions for installing and
  • LevelOne WBR-6003 | Manual - Page 6
    device Package Contents Open the box of the 150Mbps N Wireless Router and carefully unpack it. The box should contain the following items: WBR-6003 150Mbps N Wireless Router Power Adapter RJ-45 Cable CD Manual / Utility Quick Installation Guide If any item is found missing or damaged, please contact
  • LevelOne WBR-6003 | Manual - Page 7
    transmission. • Steady blinking indicates WPS function is activated and the router is pairing with wireless client. 4) LAN Lights • A solid light indicates to an Ethernet enable computer on ports 1 ~ 4. • LED blinks during data transmission. 5) Wireless On/Off Button/ WPS Button • Press and hold for
  • LevelOne WBR-6003 | Manual - Page 8
    range signal coverage. 2) LAN Ports (1~4) Connect Ethernet devices such as computers, switches or hubs. 3) WAN Port The WAN port is the connection for the Ethernet cable to the Cable or DSL Modem. 4) Reset Button It allows user can reset device to Factory Default setting. 4) Power Jack Receptor
  • LevelOne WBR-6003 | Manual - Page 9
    . Setup LAN connection Wired LAN connection: Connect an Ethernet cable from your computer's Ethernet port to one of the LAN ports of the Wireless Router. Wireless LAN connection: Locate the WBR-6003 at a proper position to gain the best transmit performance. 3. Setup WAN connection Prepare an
  • LevelOne WBR-6003 | Manual - Page 10
    4. Check Your Network Settings 1. Please make sure your PC can get IP address automatically so the WBR-6003 can communicate with your PC during configuration. • Select "Control Panel" > "Network Connections". • Right click the "Local Area Connection" and choose "Properties". • Select the TCP/IP
  • LevelOne WBR-6003 | Manual - Page 11
    . 2. Setup mode You can select Wizard mode to run the setup step-by-step or run advanced mode to diagnose the network settings of the router. 11
  • LevelOne WBR-6003 | Manual - Page 12
    or Internet. 4. Quick Wizard Install mode Setup Make sure the router is powered on. Make sure your network adapter is connected to the LAN port of the router Make sure your network adapter has an IP address. Click "Next" for continues 5. Wireless Setting Key in the SSID, Channel and Security options
  • LevelOne WBR-6003 | Manual - Page 13
    . Click the button, "Let me select WAN service by myself", to disable this function. Note: The Item supports to detect the Dynamic and PPPoE WAN Services only Example, the Dynamic WAN type is detected. 7. Manual select WAN Service In the manual mode, Click the any icons for continues. 8. Summary
  • LevelOne WBR-6003 | Manual - Page 14
    Internet connection. Test WAN Networking service. Click "Next" for continue. You can ignore the by select the "Ignore Test". 11. Setup Completed. The Easy Setup is finish. You can open the default web browser to configure advanced settings of the Router. Click "Finish" to complete the installation
  • LevelOne WBR-6003 | Manual - Page 15
    the WBR-6003, ensure you enter the correct IP Address. Type in "admin" (without quotes) in the Password box, Then click Login Note: admin is the default login password for the unit. The user can setup step by step to finish the connection with Wizard. If you are an advanced user, you can access the
  • LevelOne WBR-6003 | Manual - Page 16
    Setup Wizard will guide you through a basic configuration procedure step by step. Press Next to begin. Step 1: Set up your password. Press "Next" system 16
  • LevelOne WBR-6003 | Manual - Page 17
    Step 2: Select Wan Type. Auto Detecting or Setup Manually. Press "Next" Step 3: Setup WAN Type of your internet, then press "Next" Setup the LAN IP, Host Name information and WAN Mac address, then press "Next" 17
  • LevelOne WBR-6003 | Manual - Page 18
    type of PPP over Ethernet, please fill in PPPoE service information which is provided by your ISP. After setup, press "Next" Step 5: Set up your Wireless settings, you can Enable/Disable wireless, setup SSID information, and configure wireless channel in this page. After setup, press "Next" Set
  • LevelOne WBR-6003 | Manual - Page 19
    Step 6: Check all settings is correct, then click "Apply Setting" button. The device will automatically reboot to make the settings effect. Once the user finishes those steps and the router screen displayed as below. It means that the Internet connection is now established. 19
  • LevelOne WBR-6003 | Manual - Page 20
    this product's working status: WAN Port Status: If the WAN port is assigned a dynamic IP, there may appear a "Renew" or "Release" button on the sidenote column. You can click this button to renew or release IP manually. Wireless Status: You can check your Wireless settings in this column. Statistics
  • LevelOne WBR-6003 | Manual - Page 21
    6. Advanced Setup To access the Advanced Setup, click on Advanced Setup at the top of the page. Or, for first time installation, choose Advanced Setup and click Enter. Once in the Advanced Setup, you will be presented with the following menu. 21
  • LevelOne WBR-6003 | Manual - Page 22
    Basic Setting These are the basic settings of the unit. Click on the menu on the left to access the respective settings page. 22
  • LevelOne WBR-6003 | Manual - Page 23
    (Local Area Network) settings on your WBR-6003 150Mbps N Wireless Router and WAN (Wide Area Network) connection. 1. LAN IP Address: The local IP address of this device. The computers on your network must use the LAN IP address of your product as their Default Gateway. You can change it if necessary
  • LevelOne WBR-6003 | Manual - Page 24
    over Ethernet: Some ISPs require the use of PPPoE to connect to their services. PPTP: Some ISPs require the use of PPTP to connect to their services. L2TP: Some ISPs require the use of L2TP to connect to their services Static IP Address WAN IP Address, Subnet Mask, Gateway, Primary and Secondary DNS
  • LevelOne WBR-6003 | Manual - Page 25
    system is idle. Dynamic IP Address with Road Runner Session Management 1. LAN IP Address is the IP address of this product. It must be the default gateway of your computers. 2. WAN Type is Dynamic IP Address. If the WAN type is not correct, change it! 3. Host Name: Optional. Required by some
  • LevelOne WBR-6003 | Manual - Page 26
    your ISP assigned to you. For security, this field appears blank. If you don't want to change the password, leave it empty. 2. PPPoE Service Name: Optional. Input the service name if your ISP requires it. Otherwise, leave it blank. 3. Maximum Idle Time: the amount of time of inactivity before
  • LevelOne WBR-6003 | Manual - Page 27
    the PPTP server. 3. PPTP Account and Password: The account and password your ISP assigned to you. If you don't want to change the password, keep it empty. 4. Connection ID: ISP until the connection is established. 9. Manually: The device will not make the link until someone clicks the connect-button in
  • LevelOne WBR-6003 | Manual - Page 28
    the PPTP server. 3. PPTP Account and Password: the account and password your ISP assigned to you. If you don't want to change the password, keep it empty. 4. Connection ID: ISP until the connection is established. • Manually: The device will not make the link until someone clicks the connect-button in the
  • LevelOne WBR-6003 | Manual - Page 29
    type) Used when WAN is set as DHCP or Static IP, the user can assign a global IP address to a LAN IP Address. Virtual Computer enables you to use the original NAT feature, and allows you to setup the one-to-one mapping of multiple global IP address and local IP address. • Global IP
  • LevelOne WBR-6003 | Manual - Page 30
    DHCP Server This page allows you to configure the DHCP server on the 150Mbps N Wireless Router For more settings click on More. DHCP Server: To either Disable or Enable DHCP Server. Lease Time: DHCP lease time to the DHCP client IP
  • LevelOne WBR-6003 | Manual - Page 31
    default setting is LevelOne. The SSID can be easily changed to establish a new wireless network. Note: SSID names may contain up to 32 ASCII characters. Wireless Mode: You can choose the wireless mode to IEEE 802.11b/g Mixed mode, IEEE 802.11g only, or IEEE 802.11b only. SSID Broadcast: The WBR-6003
  • LevelOne WBR-6003 | Manual - Page 32
    and small office environment. It reduces the user steps required to configure a network and supports two methods that are familiar to most consumers to configure a network and enable security. Please ensure you have wireless security set up on the WBR-6003 before initializing WPS functions. Set PIN
  • LevelOne WBR-6003 | Manual - Page 33
    Enter PIN number of Wireless Adapter It is also possible to use the PIN number you have set on the wireless adapter. Set the adapter as Enrollee and enter the PIN you want. Enter the enrollee's (computer's wireless adapter) PIN number and then click the "Trigger" button to initiate WPS. 33
  • LevelOne WBR-6003 | Manual - Page 34
    " button. An alternative is to press the WPS button at the front of the router for 1 second, until the WLAN light starts flashing. This indicates that WPS is activated. Then press and hold the WPS button on your wireless client for 1 second. If your device has no physical WPS push button, then
  • LevelOne WBR-6003 | Manual - Page 35
    application. AP Only: WDS is disabled. WBR-6003 functions as normal Access Point mode WDS - Bridge: Create a WDS Bridge between multiple Access Points, and bridge to only wired connections. In this mode, the WBR-6003 will not provide service to any wireless clients. WDS - Bridge + AP: A combination
  • LevelOne WBR-6003 | Manual - Page 36
    configuring the wireless security settings on the WBR-6003, you will also need to configure the same settings on your wireless adapter before you attempt a wireless connection. Please note that not all adapters support all the available security functions. No Encryption is the default (as shown
  • LevelOne WBR-6003 | Manual - Page 37
    to have a RADIUS server on your network to authenticate access. Please type in the details for your RADIUS server. RADIUS Server IP Address, or the RADIUS server's domain-name. RADIUS Shared Key Key value shared by the RADIUS server and this router. This key value is consistent with the key value
  • LevelOne WBR-6003 | Manual - Page 38
    WPA-PSK This security is more secure compared to WEP. Select which type of encryption to use (either TKIP or AES) and then enter the key in the Passphrase field. The field needs to be between 8 and 63 characters long and can be any combination of letters and numbers if ASCII setting is used. 38
  • LevelOne WBR-6003 | Manual - Page 39
    enter the details of your RADIUS server. RADIUS Server • IP address or the RADIUS server's domain-name. • Port number of the RADIUS Server • Enter the RADIUS Shared Key Key value shared by the RADIUS server and this router. This key value is consistent with the key value in the RADIUS server. 39
  • LevelOne WBR-6003 | Manual - Page 40
    in the Passphrase field. The field can be between 8 and 63 characters long and can be any combination of letters and numbers under ASCII format. Wireless Client List: You can use this function to see the devices connected to the WBR-6003 through the wireless network. 40
  • LevelOne WBR-6003 | Manual - Page 41
    This page allows you to change the WBR-6003 Web Configuration password. Please type in the old password (factory default password is admin) and then type in the new password. If you change the password, make sure you use the new password next time you log into the web configuration. Click Save
  • LevelOne WBR-6003 | Manual - Page 42
    Rules This page allows you to configure the port forwarding management of the WBR-6003. Use the menu on the left to access the setting pages. The port forwarding feature is required because the Wireless Router's NAT (Network Address Translation) will block incoming traffic from the Internet
  • LevelOne WBR-6003 | Manual - Page 43
    Virtual Server A virtual server is defined as a Service Port, and all requests to this port will be redirected to the computer specified by the Server IP. Virtual Server can work with Scheduling Rules, and give user more flexibility on Access control. For Detail, please refer to Scheduling Rule (
  • LevelOne WBR-6003 | Manual - Page 44
    to Forwarding Rules > Miscellaneous section. 1. Trigger: The outbound port number that will be triggered by the application. 2. Incoming Ports: When the trigger packet is detected, the inbound packets sent to the specified port numbers and are allowed to pass through the firewall. The WBR-6003 also
  • LevelOne WBR-6003 | Manual - Page 45
    configure this item if you want to access an FTP server whose port number is not 21. This setting will be lost after rebooting. UPnP Setting The WBR-6003 supports Universal Plug and Play. If the OS supports this function enable it likes Windows XP. When the user gets IP address from Device, it will
  • LevelOne WBR-6003 | Manual - Page 46
    Security Settings This section allows you to configure the security management of the unit. Click on the menu on the left to access the respective setting page. 46
  • LevelOne WBR-6003 | Manual - Page 47
    you to control what packets are allowed to pass through the WBR-6003. The Outbound Filter applies to all outbound packets and the can define the following: • Source IP address • Source port address • Destination IP address • Destination port address • Protocol: TCP or UDP or both. • Use Schedule Rule#
  • LevelOne WBR-6003 | Manual - Page 48
    , U53, U20002999. No prefix indicates both TCP and UDP are defined. An empty implies all port addresses. Packet Filter can also work with Scheduling Rules and give users more flexibility on Access control. For more detail, please refer to Scheduling Rule (Advanced Setting > Schedule Rule). Each rule
  • LevelOne WBR-6003 | Manual - Page 49
    Example 2: (1.2.3.100-1.2.3.199) Remote hosts can do everything except read net news (port 199) and transfer files via FTP (port 21) behind Router Server. Others are all allowed. After Inbound Packet Filter setting is configured, click the save button. 49
  • LevelOne WBR-6003 | Manual - Page 50
    box next to Enable in the Outbound Packet Filter field. Example 1: Router LAN IP is 192.168.1.1 (192.168.1.100-192.168.1.149) Located hosts are only allowed to send mail (port 25), receive mail (port 110), and browse Internet (port 80); port 53 (DNS) is necessary to resolve the domain name. (192.168
  • LevelOne WBR-6003 | Manual - Page 51
    Example 2: Router LAN IP is 192.168.1.254 (192.168.1.100 and 192.168.1.119) Located Hosts can do everything except read net news (port 119) and transfer files via FTP (port 21) Others are allowed. After Outbound Packet Filter setting is configured, click the save button. 51
  • LevelOne WBR-6003 | Manual - Page 52
    users from accessing specific domain addresses (web sites). To enable Domain Filter, make sure to tick the Enable tick box. • Log DNS Query: Check if you want to log the action when someone accesses want the WBR-6003 to take. Tick on Drop to block the access and/or tick on Log to log the access. •
  • LevelOne WBR-6003 | Manual - Page 53
    Web Site. The major difference between Domain Filter and URL Blocking is that Domain Filter requires the user to input suffixes (etc: xxx.com, ttt.net) while URL Blocking only requires user to input a keyword. In other words, Domain filter can block specific website, while URL Blocking can block
  • LevelOne WBR-6003 | Manual - Page 54
    Address Control allows you to assign different access right for different users and to assign a specific IP address to To control which wireless client can be associated with this device. If a client is denied, then it means the client cannot send or receive any data via this WBR-6003. Choose "allow
  • LevelOne WBR-6003 | Manual - Page 55
    check "A" will allow the corresponding client to associate to the wireless LAN. In this page, we provide the following Combo box and are "Denied" to associate to the wireless LAN. 4. Clients 1 and 3 have fixed IP address either from the DHCP server of this device or manually assigned: ID 1 - "00-12
  • LevelOne WBR-6003 | Manual - Page 56
    administration task. For better security, you can specify just one IP address or use subnet mask bits "/nn" Port Scan, Ping of Death, Land Attack etc. VPN PPTP and IPSec Pass-Through: Virtual Private Networking (VPN) is typically used for work-related networking. For VPN tunnels, the router supports
  • LevelOne WBR-6003 | Manual - Page 57
    Advanced Settings These pages allow you to configure the more advanced settings on the unit. 57
  • LevelOne WBR-6003 | Manual - Page 58
    you to set the time settings of the WBR-6003. There are three ways to set up the System Time of the WBR-6003. 1. Get Date and Time by NTP from your computer. 3. Set Date and Time manually: Selected if you want to Set Date and Time manually. Daylight Saving: If required, set the Daylight Saving
  • LevelOne WBR-6003 | Manual - Page 59
    System Log The WBR-6003 supports both Syslog (using UDP packets) and E-Mail alert. It support two methods to export one recipient, use ";" or "," (no quotes) to separate the e-mail addresses. • E-Mail Subject: Enter the subject for the e-mail (optional) • User Name / Password: Username and Password
  • LevelOne WBR-6003 | Manual - Page 60
    connect to the WBR6003, or any services behind the router from the internet can just use one of the supported Dynamic DNS providers in the list. After successfully registering the account, the Dynamic DNS provider would provide you with the following details: • Host Name • Username/Email • Password
  • LevelOne WBR-6003 | Manual - Page 61
    (Simple Network Management Protocol) is designed to give users the ability to remotely manage a computer or network : Set the community of public. This will act as a password. • Set Community: Set the community of private. This will act as a password. • IP 1,IP 2,IP 3,IP 4: Enter the IP addresses
  • LevelOne WBR-6003 | Manual - Page 62
    Routing When you have more than one WBR-6003, or router with different subnets on the network, you will need to enable this function to allow the different subnets to communicate with each other. There are two types of routing supported by the WBR-6003. • Dynamic Routing: This method uses Routing
  • LevelOne WBR-6003 | Manual - Page 63
    would use the above table to determine that it had to go via 192.168.123.103 (Router 2) And if it sends Packets to 192.168.1.11 will go via 192.168.123.216 (Router 1) Each rule can be enabled or disabled individually. After routing table setting is configured, click the save
  • LevelOne WBR-6003 | Manual - Page 64
    and set the Start and End Times for each day. Then click Save to save the new rule. Once defined, you can use it for Wireless setting, Virtual Server, Packet Filters, URL Blocking, and Domain Filters by entering the rule number in the "Schedule Rule#" fields. 64
  • LevelOne WBR-6003 | Manual - Page 65
    When you set up the schedule rule, it will have rules in rule table as following: Schedule Enable Selected if you want to Enable the Schedule. Edit To edit the schedule rule. Delete To delete the schedule rule, and the rule# of the rules behind the deleted one will decrease one automatically. 65
  • LevelOne WBR-6003 | Manual - Page 66
    Toolbox This section has some basic tools to maintain the WBR-6003's systems. 66
  • LevelOne WBR-6003 | Manual - Page 67
    View Log You can View system log by clicking the View Log button. 67
  • LevelOne WBR-6003 | Manual - Page 68
    Upgrade This page allows you to perform updates to the firmware of the WBR-6003. To use, click Browse and locate the firmware image file, then click Upgrade. Note: Please connect to the WBR-6003 using a wired LAN connection as if the connection breaks during the update, it will render the unit
  • LevelOne WBR-6003 | Manual - Page 69
    and you have to know the MAC address of this device, say 00-11-22-33-44-55. Clicking "Wake up" button will make the router to send the wake-up frame to the target device immediately. Domain Name or IP Address for Test Allow you to configure an IP, and
  • LevelOne WBR-6003 | Manual - Page 70
    and LevelOne Wireless PCI Card. Authentication Server: Windows 2000 RADIUS server with Service Pack 3 and HotFix Q313664. Note. Windows 2000 RADIUS server only supports PEAP after upgrade to service pack 3 and HotFix Q313664 (You can get more information from http://support.microsoft.com/default
  • LevelOne WBR-6003 | Manual - Page 71
    on this computer. 4. We will change EAP type to fit the variable test condition. Figure 2 is a setting picture of Windows XP without service pack 1. If users upgrade to service pack 1, then they can't see MD5-Challenge from EAP type list any more, but they will get a new Protected EAP (PEAP) option
  • LevelOne WBR-6003 | Manual - Page 72
    on PC1. (Fig 4) 2. PC1 chooses the SSID of DUT as the Access Point. 3. Set authentication type of wireless client and RADIUS server both to EAP_TLS. 4. Disable the wireless connection and enable again. 5. The DUT will send the user's certificate to the RADIUS server, and then send the message of
  • LevelOne WBR-6003 | Manual - Page 73
    Access Point. 2. Set authentication type of wireless client and RADIUS server both to PEAP_TLS. 3. Disable the wireless connection and enable again. 4. The DUT will send the user's remote host successfully. Support Type: The router supports the types of 802.1x Authentication: PEAP-CHAPv2 and PEAPTLS.
  • LevelOne WBR-6003 | Manual - Page 74
    B FAQ and Troubleshooting What can I do when I have some trouble at the first time? 1. Why can't I configure the router even if the cable is plugged in the ports of Router and the LED is also lit? A: First, make sure that which port is plugged. If the cable is in the WAN port, please change to
  • LevelOne WBR-6003 | Manual - Page 75
    off and on the router. If this symptom continues to occur, please reset to default settings or upgrade to the latest firmware and try again. Status DSL or Cable modem is plugged in WAN port of Router and that the network cable from LAN port of router is plugged in Ethernet adapter. Then, please
  • LevelOne WBR-6003 | Manual - Page 76
    5. When I use Static IP Address to connect to the Internet, I can access or ping global IP addresses such as 202.93.91.218. However, I cannot access the a website by using its domain name, for example http://espn.com ? A: Please check the DNS configuration of Static IP Address. Please refer to the
  • LevelOne WBR-6003 | Manual - Page 77
    How do I connect router by using wireless? 1. How to start to use wireless? A: First, make sure that you already installed wireless client device in your computer. Then check the configuration of wireless router. The default is below: About wireless client, you will see wireless icon: 77
  • LevelOne WBR-6003 | Manual - Page 78
    click and will see the AP list that wireless client can be accessed: If the client cannot find your wireless router, please refresh network list again. Choose the one that you will want to connect and connect: If successfully, the computer will show something similar. User will also retrieve IP from
  • LevelOne WBR-6003 | Manual - Page 79
    First, you must check if the driver of wireless client supports AES encryption. Please refer to the below: If SSID is default and click "Properties" to check if the driver of wireless client supports AES encryption. 3. When I use wireless to connect the router, but I find the signal is very low even
  • LevelOne WBR-6003 | Manual - Page 80
    Transfer Rate Transmit Power Frequency Range Modulation Schemes Channels Security Diagnostic LED Antenna Operating Systems Supported Temperature Humidity Dimensions Certifications WBR-6003 150Mbps N Wireless Router 1, 2, 5.5, 6, 9, 11, 12, 18, 24, 36, 48, 54Mbps Max physical rate up to 150 Mbps in
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
LevelOne
User Manual
Ver. 2.0
WBR-6003
150Mbps N Wireless Router