LevelOne WBR-6012 Manual
LevelOne WBR-6012 Manual
 |
View all LevelOne WBR-6012 manuals
Add to My Manuals
Save this manual to your list of manuals |
LevelOne WBR-6012 manual content summary:
- LevelOne WBR-6012 | Manual - Page 1
LevelOne User Manual WBR-6012 300Mbps Wireless Router Ver. 1.0 1 - LevelOne WBR-6012 | Manual - Page 2
this equipment may cause harmful interference unless the modifications are expressly approved in the instruction manual. The user could lose the authority to operate this equipment if an unauthorized change . The CE-Declaration of Conformity can be downloaded at: http://www.levelone.eu/support.php 2 - LevelOne WBR-6012 | Manual - Page 3
at http://global.level1.com. If you would like a copy of the GPL or other open source code in this software on a physical CD medium, LevelOne (Digital Data Communications) offers to mail this CD to you upon request, for a price of US$9.99 plus the cost of shipping. 3 - LevelOne WBR-6012 | Manual - Page 4
18 2.3 System Status 22 2.4 Advanced ...23 Appendix A FAQ and Troubleshooting 75 What can I do when I have some trouble at the first time 75 How do I connect router by using wireless 77 IP Address Password Wireless Mode Wireless SSID Wireless Security 192.168.1.1 admin Enable LevelOne None 4 - LevelOne WBR-6012 | Manual - Page 5
45 port, 10/100Mbps, auto-MDI/MDIX 4 Antenna 2dBi detachable dipole antenna (5dbi option 2 available) WPS For WPS connection and Enable "Wireless 1 Button/Wireless On Function" Reset Button Reset to Factory Default setting 1 LED Indication Status / WAN / LAN1 ~ LAN4/ Wi-Fi ● Power Jack - LevelOne WBR-6012 | Manual - Page 6
WAN PPPoE, DHCP client, Static IP ● WAN Connection Auto-reconnect, dial-on-demand, manually ● Virtual server, special application, DMZ, Super One-to-Many NAT DMZ(IP pass-through) ● NAT Session Support NAT session (10000) ● SPI Firewall IP/Service filter, URL blocking. ● DoS Protection - LevelOne WBR-6012 | Manual - Page 7
1.3 Hardware Configuration Power JACK WAN PORT LAN PORT Antenna LAN LED WiFi LED WAN LED Status LED 3 in1 Button:1.WPS 2.Wireless ON 3.Reset 7 - LevelOne WBR-6012 | Manual - Page 8
, press this button (about 1 sec) to execute WPS function. When Wireless is off, Press this button(about 5 sec) to enable "Wireless Radio". 1. Press this button then Power on the device 2. Press about 5 second, the device will reset to default then Status LED flashes per sec in Normal status. Notice - LevelOne WBR-6012 | Manual - Page 9
Procedure for Hardware Installation Step 1 Insert the Ethernet cable into LAN Port: Insert the Ethernet patch cable into LAN port on the back panel of Router, and an available Ethernet port on the network adapter in the computer you will use to configure the unit. Step 2 Insert the Ethernet patch - LevelOne WBR-6012 | Manual - Page 10
Step 4. Complete the setup. When complete, the Status LED will flash. 10 - LevelOne WBR-6012 | Manual - Page 11
Chapter 2 Making Configuration This product provides Web based configuration scheme, that is, configuring by your Web browser, such as Mozilla Firefox or or Internet Explorer. This approach can be adopted in any MS Windows, Macintosh or UNIX based platforms. 11 - LevelOne WBR-6012 | Manual - Page 12
. 2.2 Setup mode You can select Wizard mode to run the setup step-by-step or run advanced mode to diagnose the network settings of the router. 12 - LevelOne WBR-6012 | Manual - Page 13
or Internet icons for the Status of PC, Router or Internet. 2.4 Quick Wizard Install mode Setup 1. Make sure the router is powered on. 2. Make sure your network adapter is connected to the LAN port of the router 3. Make sure your network adapter has an IP address. Click "Next" for continues 13 - LevelOne WBR-6012 | Manual - Page 14
2.5. Wireless Setting. Key in the SSID, Channel and Security options, and then click "Next" for continues. 2.6 Auto Detect WAN Service. Click "Next" for continue. Click the button, "Let me select WAN service by myself", to disable this function. Note: The Item supports to detect the Dynamic and - LevelOne WBR-6012 | Manual - Page 15
Example, the Dynamic WAN type is detected. 2.7. Manual select WAN Service In the manual mode, Click the any icons for continues. 2.8 Summary of the settings and Next to "Reboot" Click "Next" for continue. 15 - LevelOne WBR-6012 | Manual - Page 16
2.9 Apply the Settings or Modify. Click "Next" for continue. 2.10 Test the Internet connection. Test WAN Networking service. Click "Next" for continue. You can ignore the by select the "Ignore Test". 16 - LevelOne WBR-6012 | Manual - Page 17
2.11 Setup Completed. The EzSetup is finish, you can open the default web browser to configure advanced settings of the Router. Click "Finish" to complete the installation. 17 - LevelOne WBR-6012 | Manual - Page 18
2.2 Login to Configure from Wizard Type in the IP Address (http://192.168.1.1) Type password, the default is "admin" and click 'login' button. Press "Wizard" for basic settings with simple way. Press "Next" to start wizard. 18 - LevelOne WBR-6012 | Manual - Page 19
Step 1: Set up your system password. Step 2: Select Wan Type. Auto Detecting or Setup Manually. 19 - LevelOne WBR-6012 | Manual - Page 20
Step 3: Setup the LAN IP and WAN Type. Step 4: Example: Please fill in PPPoE service information which is provided by your ISP. Step 5: Set up your Wireless. 20 - LevelOne WBR-6012 | Manual - Page 21
Set up your Authentication and Encryption. Step 6: Then click Apply Setting. And then the device will reboot. Step 7: Click Finish to complete it. 21 - LevelOne WBR-6012 | Manual - Page 22
observing this product's working status: WAN Status. If the WAN port is assigned a dynamic IP, there may appear a "Renew" or "Release" button on the Sidenote column. You can click this button to renew or release IP manually. Statistics of WAN: enables you to monitor inbound and outbound packets 22 - LevelOne WBR-6012 | Manual - Page 23
2.4 Advanced 2.4.1 Basic Setting Please Select "Advanced Setup" to Setup 23 - LevelOne WBR-6012 | Manual - Page 24
appearance depend on the WAN type. Choose correct WAN type before you start. 1. LAN IP Address: the local IP address of this device. The computers on your network must use the LAN IP address of your product as their Default Gateway. You can change it if necessary. 2. WAN Type: WAN connection type of - LevelOne WBR-6012 | Manual - Page 25
D. PPTP: Some ISPs require the use of PPTP to connect to their services. F. L2TP: Some ISPs require the use of L2TP to connect to their services Static IP Address: ISP assigns you a static IP address: WAN IP Address, Subnet Mask, Gateway, Primary and Secondary DNS: enter the proper setting provided - LevelOne WBR-6012 | Manual - Page 26
appears blank. If you don't want to change the password, leave it empty. PPPoE Service Name: optional. Input the service name if your ISP requires it. Otherwise, leave it with ISP until the connection is established. Manually :The device will not make the link until someone clicks the connect-button in the - LevelOne WBR-6012 | Manual - Page 27
to their services First, Please check your ISP assigned and Select Static IP Address or Dynamic IP Address. 1. My IP Address and My Subnet Mask: the private IP address and subnet mask your ISP assigned to you. 2. Server IP Address: the IP address of the PPTP server. 3. PPTP Account and Password: the - LevelOne WBR-6012 | Manual - Page 28
connection is established. Manually: The device will not make the link until someone clicks the connect-button in the Staus-page. L2TP: Some ISPs require the use of L2TP to connect to their services First, Please check your ISP assigned and Select Static IP Address or Dynamic IP Address. For example - LevelOne WBR-6012 | Manual - Page 29
link up with ISP when the clients send outgoing packets. Auto-Reconnect(Always-on):The device will link with ISP until the connection is established. Manually :The device will not make the link until someone clicks the connect-button in the Staus-page. 29 - LevelOne WBR-6012 | Manual - Page 30
to setup the one-to-one mapping of multiple global IP address and local IP address. • Global IP: Enter the global IP address assigned by your ISP. • Local IP: Enter the local IP address of your LAN PC corresponding to the global IP address. • Enable: Check this item to enable the Virtual Computer - LevelOne WBR-6012 | Manual - Page 31
allows you to assign DNS Servers 6. Primary WINS/Secondary WINS: This feature allows you to assign WINS Servers 7. Gateway: The Gateway Address would be the IP address of an alternate Gateway. This function enables you to assign another gateway to your PC, when DHCP server offers an - LevelOne WBR-6012 | Manual - Page 32
" to disable WiFi service. Network ID (SSID): Network ID is used for identifying the Wireless LAN (WLAN). Client stations can roam freely over this product and other Access Points that have the same Network ID. (The factory setting is "default") SSID Broadcast: The router will Broadcast beacons that - LevelOne WBR-6012 | Manual - Page 33
the Regulatory Domain. WPS (WiFi Protection Setup) WPS is WiFi Protection Setup which is similar to WCN-NET and offers safe and easy way in Wireless Connection. WDS(Wireless Distribution System) WDS operation as defined by the IEEE802.11 standard has been made available. Using WDS it is possible to - LevelOne WBR-6012 | Manual - Page 34
Box was used to switch the function of the 802.1X. When the 802.1X function is enabled, the Wireless user must authenticate to this router first to use the Network service. RADIUS Server IP address or the 802.1X server's domain-name. RADIUS Shared Key Key value shared by the RADIUS server and - LevelOne WBR-6012 | Manual - Page 35
WPA-PSK 1. Select Encryption and Pre-share Key Mode If you select HEX, you have to fill in 64 hexadecimal (0, 1, 2...8, 9, A, B...F) digits If ASCII, the length of pre-share key is from 8 to 63. 2. Fill in the key, Ex 12345678 35 - LevelOne WBR-6012 | Manual - Page 36
WPA Check Box was used to switch the function of the WPA. When the WPA function is enabled, the Wireless user must authenticate to this router first to use the Network service. RADIUS Server IP address or the 802.1X server's domain-name. Select Encryption and RADIUS Shared Key If you select HEX, you - LevelOne WBR-6012 | Manual - Page 37
(AES) Check Box was used to switch the function of the WPA. When the WPA function is enabled, the Wireless user must authenticate to this router first to use the Network service. RADIUS Server IP address or the 802.1X server's domain-name. Select RADIUS Shared Key If you select HEX, you have to - LevelOne WBR-6012 | Manual - Page 38
enabled, the Wireless user must authenticate to this router first to use the Network service. RADIUS Server The router will detect automatically which Security type(Wpa-psk version 1 or 2) the client uses to encrypt. IP - LevelOne WBR-6012 | Manual - Page 39
Wireless Client List 2.4.1.4 Change Password You can change Password here. We strongly recommend you to change the system password for security reason. 2.4.2 Forwarding Rules 39 - LevelOne WBR-6012 | Manual - Page 40
some of them accessible by enabling the Virtual Server Mapping. A virtual server is defined as a Service Port, and all requests to this port will be redirected to the computer specified by the Server IP. Virtual Server can work with Scheduling Rules, and give user more flexibility on Access control - LevelOne WBR-6012 | Manual - Page 41
, like Internet games, Video conferencing, Internet telephony, etc. Because of the firewall function, these applications cannot work with a pure NAT router. The Special Applications feature allows some of these applications to work with this product. If the mechanism of Special Applications fails to - LevelOne WBR-6012 | Manual - Page 42
limitation. Hardware DMZ Port This feature can let the device to get Global IP from ISP directly. Some Devices, like STB or MOD, should work via is not 21. This setting will be lost after rebooting. Xbox Support The Xbox is a video game console produced by Microsoft Corporation. Please enable this - LevelOne WBR-6012 | Manual - Page 43
43 - LevelOne WBR-6012 | Manual - Page 44
2.4.3 Security Settings 44 - LevelOne WBR-6012 | Manual - Page 45
you to control what packets are allowed to pass the router. Outbound filter applies on all outbound packets. However, Inbound For each rule, you can define the following: • Source IP address • Source port address • Destination IP address • Destination port address • Protocol: TCP or UDP or both. - LevelOne WBR-6012 | Manual - Page 46
For source or destination IP address, you can define a single IP address (4.3.2.1) or a range of IP addresses (4.3.2.1-4.3.2.254). An empty implies all IP addresses. For source or destination port, you can define a single port (80) or a range of ports (1000-1999). Add prefix "T" or "U" to specify - LevelOne WBR-6012 | Manual - Page 47
are all blocked. Example 2: (1.2.3.100-1.2.3.119) Remote hosts can do everything except read net news (port 119) and transfer files via FTP (port 21) behind Router Server. Others are all allowed. After Inbound Packet Filter setting is configured, click the save button. Outbound Filter: 47 - LevelOne WBR-6012 | Manual - Page 48
To enable Outbound Packet Filter click the check box next to Enable in the Outbound Packet Filter field. Example 1: Router LAN IP is 192.168.12.254 (192.168.12.100-192.168.12.149) Located hosts are only allowed to send mail (port 25), receive mail ( - LevelOne WBR-6012 | Manual - Page 49
Example 2: Router LAN IP is 192.168.12.254 (192.168.12.100 and 192.168.12.119) Located Hosts can do everything except read net news (port 119) and transfer files via FTP (port 21) Others are allowed After Outbound Packet Filter setting is configured, click the save button. 49 - LevelOne WBR-6012 | Manual - Page 50
if you want to enable Domain Filter. Log DNS Query Check if you want to log the action when someone accesses the specific URLs. Privilege IP Addresses Range Setting a group of hosts and privilege these hosts to access network without restriction. 50 - LevelOne WBR-6012 | Manual - Page 51
Domain Suffix A suffix of URL to be restricted. For example, ".com", "xxx.com". Action When someone is accessing the URL met the domain-suffix, what kind of action you want. Check drop to block the access. Check log to log these access. Enable Check to enable each rule. Example: 51 - LevelOne WBR-6012 | Manual - Page 52
action will be record in log-file. 3. URL include "www.baidu.com" will be blocked, but the action will not be record in log-file. 4. IP address x.x.x.1~x.x.x.99 can access Internet without restriction. 2.4.3.3 URL Blocking URL Blocking will block LAN computers to connect to pre-defined Websites. 52 - LevelOne WBR-6012 | Manual - Page 53
The major difference between "Domain filter" and "URL Blocking" is Domain filter require user to input suffix (like .com or .org, etc), while URL Blocking require user to input a keyword only. In other words, Domain filter can block specific website, while URL Blocking can block hundreds of websites - LevelOne WBR-6012 | Manual - Page 54
In this example: 1. URL include "msn" will be blocked, and the action will be record in log-file. 2. URL include "sina" will be blocked, but the action will be record in log-file 54 - LevelOne WBR-6012 | Manual - Page 55
2.4.3.4 MAC control Administrator MAC Control Regardless the MAC access configuration of administrator, specific MAC can access the device. This device can record 3 sets. When the host(should be admin) logins Web management, the device will record MAC address of this host. Before this host - LevelOne WBR-6012 | Manual - Page 56
different access right for different users and to assign a specific IP address to a certain MAC address. MAC Address Control Check Connection control Check "Connection control" to enable the controlling of which wired and wireless clients can connect to this device. If a client is denied to connect - LevelOne WBR-6012 | Manual - Page 57
it empty if you don't care its IP address. C When "Connection control" is checked, check "C" will allow the corresponding client to connect to this device. A When "Association control" is checked, check "A" will allow the corresponding client to associate to the wireless LAN. In this page, we - LevelOne WBR-6012 | Manual - Page 58
not listed in the "Control table" are "denied" to associate to the wireless LAN. 4.Clients 1 and 3 have fixed IP addresses either from the DHCP server of this device or manually assigned: ID 1 - "00-12-34-56-78-90" --> 192.168.12.100 ID 3 - "00-98-76-54-32-10" --> 192.168.12.101 - LevelOne WBR-6012 | Manual - Page 59
to the wireless LAN, but a wireless client with a MAC address not specified in the Control table is denied to associate to the wireless LAN. Client router will record the packet information pass through the router like IP address, port address, ACK, SEQ number and so on. And the router will - LevelOne WBR-6012 | Manual - Page 60
. Currently, the router can detect the following DoS attack: SYN Attack, WinNuke, Port Scan, Ping of Death, Land Attack etc. VPN PPTP and IPSec Pass-Through Virtual Private Networking (VPN) is typically used for work-related networking. For VPN tunnels, the router supports IPSec Passthrough and - LevelOne WBR-6012 | Manual - Page 61
2.4.4 Advanced Settings 61 - LevelOne WBR-6012 | Manual - Page 62
Zone Select a time zone where this device locates. Set Date and Time manually Selected if you want to Set Date and Time manually. Set Date and Time manually Selected if you want to Set Date and Time manually. Function of Buttons Sync Now: Synchronize system time with network time server Daylight - LevelOne WBR-6012 | Manual - Page 63
support two methods to export system logs to specific destination by means of syslog(UDP) and SMTP(TCP). The items you have to setup including: IP Address for Syslog Host IP IP and Port Input the SMTP server IP and port, which are concated with ':'. If you do not specify port number, the default - LevelOne WBR-6012 | Manual - Page 64
will map the name of your host to your current IP address, which changes each time you connect your Internet service provider. Before you enable Dynamic DNS, you need to : Provider Host Name Username/E-mail Password/Key You will get this information when you register an account on a Dynamic DNS - LevelOne WBR-6012 | Manual - Page 65
2.4.4.4 QoS This device supports QoS function. User could set specified upstream connection with different priority. There are three priorities could be selected. The packets with High priority would be processed first. 1. QoS: Quality of Service. 2. Local IP/Ports: The IP and ports that LAN side PC - LevelOne WBR-6012 | Manual - Page 66
Please select proper SNMP Version that your SNMP Management software supports. WAN Access IP Address If the user wants to limit to specific the IP address to access, please input in the item. The default 0.0.0.0 and means every IP of Internet can get some information of device with SNMP protocol - LevelOne WBR-6012 | Manual - Page 67
2.4.4.6 Routing Routing Tables allow you to determine which physical interface address to use for outgoing IP data grams. If you have more than one routers and subnets, you will need to enable routing table to allow packets to find proper routing path and allow different subnets to communicate with - LevelOne WBR-6012 | Manual - Page 68
Configuration on NAT Router Destination SubnetMask Gateway Hop 192.168.1.0 255.255.255.0 192.168.123.216 1 192.168.0.0 255.255.255.0 192.168.123.103 1 Enabled ˇ ˇ So if, for example, the client3 wanted to send an IP data gram to 192.168.0.2, it would use the above table to determine that - LevelOne WBR-6012 | Manual - Page 69
2.4.4.7 Schedule Rule You can set the schedule time to decide which service will be turned on or off. Select the "enable" item. Press "Add New Rule" You can write a rule name and set which day and what - LevelOne WBR-6012 | Manual - Page 70
one automatically. Schedule Rule can be apply to Virtual server and Packet Filter, for example: Exanple1: Virtual Server - Apply Rule#1 (ftp time: everyday 14:20 to 16:30) Exanple2: Packet Filter - Apply Rule#1 (ftp time: everyday 14:20 to 16:30). 70 - LevelOne WBR-6012 | Manual - Page 71
71 - LevelOne WBR-6012 | Manual - Page 72
2.4.5 Toolbox 2.4.5.1 View Log You can View system log by clicking the View Log button 72 - LevelOne WBR-6012 | Manual - Page 73
by clicking the Backup Setting button and save it as a bin file. Once you want to restore these settings, please click Firmware Upgrade button and use the bin file you saved. 2.4.5.4 Reset to default You can also reset this product to factory default by clicking the Reset to default button. 73 - LevelOne WBR-6012 | Manual - Page 74
00-11-22-33-44-55. Clicking "Wake up" button will make the router to send the wake-up frame to the target device immediately. Domain Name or IP Address for Test Allow you to configure an IP, and ping the device. You can ping a secific IP to test whether it is alive. 74 - LevelOne WBR-6012 | Manual - Page 75
Troubleshooting What can I do when I have some trouble at the first time? 1. Why can I not configure the router even if the cable is plugged in the ports of Router 1 or Lan port 4: Then, please check if the Pc gets ip address from Router. Use command mode as below: If yes, please execute Browser, - LevelOne WBR-6012 | Manual - Page 76
, the pc can not get ip. Please check Status Led and refer to the Q2: 2.Why can I not connect the router even if the cable is plugged while powering on: Maybe the router is the recovery mode and please refer to Q4. 3.How to reset to factory default? A: Press Wireless on /off and WPS button - LevelOne WBR-6012 | Manual - Page 77
. How do I connect router by using wireless? 1.How to start to use wireless? A: First, make sure that you already installed wireless client device in your computer. Then check the Configuration of wireless router. The default is as below: About wireless client, you will see wireless icon: Then click - LevelOne WBR-6012 | Manual - Page 78
can not access your wireless router, please refresh network list again. However, I still can not fine the device which ssid is "default", please refer to Q3. Choose the one that you will want to connect and Connect: If successfully, the computer will show and get ip from router: 2.When I use AES - LevelOne WBR-6012 | Manual - Page 79
First, you must check if the driver of wireless client supports AES encryption. Please refer to the below: If SSID is default and click "Properties" to check if the driver of wireless client supports AES encryption. 3.When I use wireless to connect the router, but I find the signal is very low even
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
-
51
-
52
-
53
-
54
-
55
-
56
-
57
-
58
-
59
-
60
-
61
-
62
-
63
-
64
-
65
-
66
-
67
-
68
-
69
-
70
-
71
-
72
-
73
-
74
-
75
-
76
-
77
-
78
-
79
 |
 |
1
LevelOne
User Manual
Ver. 1.0
WBR-6012
300Mbps Wireless Router