LevelOne WUA-0605 Manual
LevelOne WUA-0605 Manual
 |
View all LevelOne WUA-0605 manuals
Add to My Manuals
Save this manual to your list of manuals |
LevelOne WUA-0605 manual content summary:
- LevelOne WUA-0605 | Manual - Page 1
WUA-0605 300Mbps Wireless USB Network Adapter User Manual V1.0 - LevelOne WUA-0605 | Manual - Page 2
and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there The following items should be found in your package: ► 11n Wireless Adapter ► Quick Installation Guide ► CD-Rom Make sure that the package contains above items - LevelOne WUA-0605 | Manual - Page 3
1.4. Working Environment...1 1.5. System Requirements...1 2. Hardware and Driver Installation 2 2.1. Insert the Adapter ...2 2.2. Driver and Software Installation 2 3. System configuration 5 3.1. General ...5 3.2. Profile ...6 3.3. Available Network ...11 3.4. Status ...12 3.5. Statistics ...13 - LevelOne WUA-0605 | Manual - Page 4
data stays secure. 1.2. Main Features Supports 150Mbps transmission rates Complies with IEEE 802.11b, 802.11g and 802.11n standards for 2.4GHz Wireless LAN USB 2.0 Meets 64/128-bit WEP, WPA, and WPA2 security standards Compatible with Windows 2000/XP/Vista/7 Low power consumption Easy - LevelOne WUA-0605 | Manual - Page 5
2. Hardware and Driver Installation 2.1. Insert the Adapter Plug the USB Wireless Adapter into an available USB port on your computer, and the Found New Hardware Wizard (windows 7) screen will appear; Close the wizard, then clicks the following steps to install; 2.2. Driver and Software Installation - LevelOne WUA-0605 | Manual - Page 6
► Click Next ► Automatically start the installation default "install drivers and utilities"; 3 - LevelOne WUA-0605 | Manual - Page 7
► Click 'Finish' to finish installation. The installation is complete. 4 - LevelOne WUA-0605 | Manual - Page 8
mode. But in the AP mode, the wireless USB adapter act as a wireless access point which wireless client can connect to share an Internet connection with others. Use the Wireless LAN Utility to check the link information, search for available wireless networks, or create profiles that hold different - LevelOne WUA-0605 | Manual - Page 9
: The Default Gateway address of the Adapter. Others ► Show Tray Icon: Show USB Wireless LAN Utility icon in the windows taskbar notification area. ► Disable Adapter: Disable the wireless adapter. ► Radio off: Turn off the radio of the wireless adapter. 3.2. Profile Using the Profile tab (refer - LevelOne WUA-0605 | Manual - Page 10
Authentication Mode and Data encryption from the drop-down menu and import the network key. Then click OK button. ► Create a new ad-hoc mode profile If you want your wireless computers communicate with each other directly, click the Add button to create a new ad-hoc profile. Then, mark and select - LevelOne WUA-0605 | Manual - Page 11
Choose the Network Authentication Mode and Data encryption from the drop-down menu. And import the network key. Then click OK button. You have successfully created a profile. 3.2.2. Remove Select a profile and click Remove button to delete this profile (refer to the following picture). 8 - LevelOne WUA-0605 | Manual - Page 12
3.2.3. Edit Select a profile and click Edit button to edit this profile (refer to the following picture). Modify the profile information according to your demand. 9 - LevelOne WUA-0605 | Manual - Page 13
window blank (refer to the following picture). 3.2.5. Set default When you want to make one profile as a default wireless connection, you should select the profile and click Set default button. The wireless adapter will use this profile to connect to wireless network automatically when the utility - LevelOne WUA-0605 | Manual - Page 14
3.3. Available Network The Available Network tab displays a list of infrastructure and ad-hoc networks for available wireless connection (refer to the following picture). Double-click the network to which you wish to connect. 11 - LevelOne WUA-0605 | Manual - Page 15
the Authorization modes and Encryption modes in the drop-down box. If the wireless network uses a Passphrase, enter the Passphrase in the Passphrase field. Click the OK button to complete the network connection. 3.4. Status The Status tab displays the detailed information of current device and - LevelOne WUA-0605 | Manual - Page 16
can through 'PIN Input Config (PIN)' or 'Push Button (PBC)'to encrypt your network. This USB adapter also provides WPS button, you only need to push the WPS button in this USB adapter and the router which support WPS function, then the router will be encrypted to WPA2-AES mode automatically. Note - LevelOne WUA-0605 | Manual - Page 17
the Router until the WPS LED flashes ► Push the WPS button in this wireless network card for about 1-2 seconds ► The safe connection will be established automatically, please wait Method 2: ► Input the PIN code of the adapter's WPS page into the router's WPS configure page, then click 'connect'. 14 - LevelOne WUA-0605 | Manual - Page 18
► Click the 'PIN Input Config (PIN)' in the Wi-Fi protect setup of the adapter. ► Select the AP that you want to connect in the pop-up window, and then click 'Select'. ► The connection between the adapter and the router will be established automatically. Note: If there is more than one AP on the - LevelOne WUA-0605 | Manual - Page 19
4. The Access Point Mode We can use the USB wireless adapter to build an access point apart from the station mode. The wireless client can connect to it if the USB wireless adapter is set to access point mode, then you can share an Internet connection with others Click Mode in the menu bar and - LevelOne WUA-0605 | Manual - Page 20
name (SSID): The name of this AP and can be modified. ► Channel: You can select channel 1 to 14, which provides a choice of avoiding interference. ► Network authentication: It contains open system, shared key, WPA-PSK and WPA2-PSK. You can configure safe encryption mode for this AP. If you select - LevelOne WUA-0605 | Manual - Page 21
the number of beacon intervals that must go by before a new DTIM is sent. ► Preamble Mode: "Short" is suitable for heavy traffic wireless network. "Long" provides much communication reliability; the default setting is "Short". ► Set defaults: Set the options in advanced to default. ► Apply: Save the - LevelOne WUA-0605 | Manual - Page 22
4.3. Statistics It display receive and transmit information. 4.4. ICS You can set internet connecting sharing (ICS), select the network you want to share in the list, then click 'apply', the following picture appears. When you connect successfully, you can share network with others. 19 - LevelOne WUA-0605 | Manual - Page 23
5. Troubleshooting This chapter provides solutions to problems that may occur during the installation and operation of the USB Wireless Adapter. Read the descriptions below to solve your problems. 1. The USB Wireless Adapter does not work properly? Reinsert the USB Wireless Adapter into your PC's
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
 |
 |
WUA-0605
300Mbps Wireless USB Network Adapter
User Manual
V1.0