Lexmark 13P0000 Printer Quick Reference Guide
Lexmark 13P0000 - C 750 Color Laser Printer Manual
 |
UPC - 734646520003
View all Lexmark 13P0000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Lexmark 13P0000 manual content summary:
- Lexmark 13P0000 | Printer Quick Reference Guide - Page 1
Lexmark C750 Quick Reference Loading a 500-sheet tray Follow these instructions to load the standard tray (tray 1) and all 500-sheet trays. 1 Remove the tray. 2 Squeeze the front guide lever and slide the guide to the front of the tray. 3 Squeeze the side guide lever and slide the guide to the - Lexmark 13P0000 | Printer Quick Reference Guide - Page 2
manual feed request and print on paper already installed in one of the paper trays. • Cancel the current job. Check Paper Guide The guide the printer returns to the Ready state. Clear Paper Path Paper is jammed. Refer to the Lexmark C750 Clearing Jams reference card for instructions to
-
1 -
2
 |
 |
Lexmark C750
Quick Reference
Loading a 500-sheet tray
Follow these instructions to load the standard tray (tray 1) and all
500-sheet trays.
1
Remove the tray.
2
Squeeze the front guide lever and slide the guide to the front of
the tray.
3
Squeeze the side guide lever and slide the guide to the correct
position for the size paper you are loading.
Icons along the back of the tray indicate paper sizes.
4
Flex the sheets back and forth to loosen them, and then fan
them. Do not fold or crease the paper. Straighten the edges of
the stack on a level surface.
5
Place the paper against the back left corner of the tray, print
side down. Do not bend or wrinkle the sheets.
Note:
Do not exceed the maximum stack height. Overfilling
the tray may cause a paper jam.
6
Squeeze the front guide lever and slide the guide until it lightly
touches the stack of paper.
7
Reinstall the tray.
Loading a 2000-sheet tray
Follow these instructions to load a 2000-sheet tray.
Do not load any
print media other than paper in the 2000-sheet tray.
1
Pull open the tray.
2
Squeeze the side guide lever, lift the guide, and place it into
the appropriate slot for the size paper you are loading.
3
Squeeze the two front guide levers and slide them to the
correct position for the size paper you are loading.
4
Slide the bottom support toward the front of the tray until it
touches the front guide.
5
Flex the sheets back and forth to loosen them, and then fan
them.
6
Place the paper against the back left corner of the tray, print
side down. Do not load bent or wrinkled paper.
Note:
Do not exceed the maximum stack height. Overfilling
the tray may cause a paper jam.
7
Close the tray.
Loading the multipurpose feeder
The multipurpose feeder accepts plain paper, envelopes,
transparencies, card stock, and labels.
1
In your word processor, spreadsheet, browser, or other
application, select
File
Print
.
2
Click
Properties
(or
Options
,
Printer
, or
Setup
depending on the
application) to view the printer driver settings.
3
Select
MP Feeder
from the Form Source list box.
4
Select your media type (envelopes, transparencies, glossy
paper) from the Media Type list box.
5
Click
OK
, and then send your print job as usual.
6
Go to the printer. A display message prompts you to
Load
Manual
.
7
Open the multipurpose feeder.
8
Reach down into the feeder. Squeeze the paper guide lever
and slide the guide all the way towards the front of the printer.
9
Place paper print side up, or envelopes flap side down in the
feeder. Push the media in as far as it will go without forcing it.
Note:
Arrange the media correctly for the size, type, and print
method you are using. Do not overfill.
© Copyright 2001 Lexmark International, Inc. All rights reserved.
Printed in U.S.A.
This document is printed on recycled paper. 8/01
E.C. 2B0151
P/N 10B2639