Lexmark B2442 Quick Reference
Lexmark B2442 Manual
 |
View all Lexmark B2442 manuals
Add to My Manuals
Save this manual to your list of manuals |
Lexmark B2442 manual content summary:
- Lexmark B2442 | Quick Reference - Page 1
separately. Keep all other trays closed until needed. 1 Remove the tray. Note: To avoid paper jams, do not remove trays while the printer is busy. 2 Adjust the paper guides to match the size of the paper that you are loading. • Load letterhead faceup with the bottom edge of the sheet toward the - Lexmark B2442 | Quick Reference - Page 2
the guide facedown and entering the printer first. Warning-Potential Damage: Do not use envelopes with stamps, clasps, snaps, windows, coated linings, or function of the printer driver, refer to the Help of the printer driver. Maintaining the printer Replacing the toner cartridge 1 Open door A. - Lexmark B2442 | Quick Reference - Page 3
the arrows inside the printer as guides. 2 Remove the toner cartridge. 5 Close door A. 3 4 Unpack the new imaging unit, and then shake it three times to redistribute the toner. Warning-Potential Damage: Do not expose the imaging unit to direct light for more than 10 minutes. Extended exposure to - Lexmark B2442 | Quick Reference - Page 4
as shown in the illustration. 5 Insert the new imaging unit. Note: Use the arrows inside the printer as guides. 6 Insert the toner cartridge. Note: Use the arrows inside the printer as guides. 7 Close door A. Clearing jams Avoiding jams Load paper properly • Make sure that the paper lies flat - Lexmark B2442 | Quick Reference - Page 5
feeder 5 Door A 2 Open door A. 5 3 Remove the toner cartridge. 4 Remove the imaging unit. Warning-Potential Damage: Do not expose the imaging unit to direct light for more than 10 minutes. Extended exposure to light may cause print quality problems. Warning-Potential Damage: Do not touch the - Lexmark B2442 | Quick Reference - Page 6
sure that all paper fragments are removed. 6 Insert the imaging unit. Note: Use the arrows inside the printer as guides. 6 7 Insert the toner cartridge. Note: Use the arrows inside the printer as guides. 8 Close door A. 9 Insert the tray. Paper jam in the rear door 1 Open the rear door. CAUTION-HOT - Lexmark B2442 | Quick Reference - Page 7
2 Remove the jammed paper. Note: Make sure that all paper fragments are removed. Paper jam in the duplex unit 1 Remove the tray. 3 Insert the tray. 3 Close the rear door. Paper jam in the standard bin Remove the jammed paper. Note: Make sure that all paper fragments are removed. 2 Remove the - Lexmark B2442 | Quick Reference - Page 8
sure that all paper fragments are removed. 3 Flex, fan, and align the paper edges before loading. 4 Reload paper, and then adjust the paper guide. 3 Insert the tray. Paper jam in the multipurpose feeder 1 Remove paper from the multipurpose feeder. 2 Remove the jammed paper. Note: Make sure that
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
 |
 |
Quick Reference
Loading paper
Loading trays
CAUTION—TIPPING HAZARD:
To reduce the risk of
equipment instability, load each tray separately. Keep all
other trays closed until needed.
1
Remove the tray.
Note:
To avoid paper jams, do not remove trays while the
printer is busy.
2
Adjust the paper guides to match the size of the paper that you
are loading.
3
Flex, fan, and align the paper edges before loading.
4
Load the paper stack with the printable side facedown, and
then make sure that the side guides fit snugly against the
paper.
Notes:
•
Load letterhead facedown with the top edge of the
sheet toward the front of the tray for one
‑
sided printing.
•
Load letterhead faceup with the bottom edge of the
sheet toward the front of the tray for two
‑
sided printing.
•
Do not slide paper into the tray.
•
To avoid paper jams, make sure that the stack height is
below the maximum paper fill indicator.
5
Insert the tray.
If necessary, set the paper size and paper type from the control
panel to match the paper loaded.
Loading the multipurpose feeder
1
Open the multipurpose feeder.
1