Lexmark CS410 Print Quality Guide

Lexmark CS410 Manual

Get Lexmark CS410 PDF manuals and user guides View all Lexmark CS410 manuals
Add to My Manuals
Save this manual to your list of manuals

Lexmark CS410 manual content summary:

  • Lexmark CS410 | Print Quality Guide - Page 1
    correct the problem, then contact customer support. Characters have jagged or uneven edges Print quality guide Page 1 of 18 Action Yes Step 1 Go to step 2. a Print a font sample list to check if the fonts you are using are supported by the printer. 1 From the printer control panel, navigate
  • Lexmark CS410 | Print Quality Guide - Page 2
    kit. Contact customer support. Warning-Potential Damage: Do not expose the imaging kit to direct light for more than 10 minutes. Extended exposure to light may cause print quality problems. Warning-Potential Damage: Do not touch the underside of the imaging kit. This could damage the imaging kit
  • Lexmark CS410 | Print Quality Guide - Page 3
    the Quality menu on the printer control panel, reduce the toner density. Note: 4 is the factory default setting. b Resend the print job. Yes The problem is solved. No Go to step 2. Did the gray background disappear? Step 2 The problem is solved. a Remove, and then reinstall the imaging kit
  • Lexmark CS410 | Print Quality Guide - Page 4
    may cause print quality problems. Warning-Potential Damage: Do not touch the underside of the imaging kit. This could damage the imaging kit. b Resend the print job. Do horizontal voids appear on prints? Step 4 Replace the imaging kit, and then resend the print job. Contact customer support. Do
  • Lexmark CS410 | Print Quality Guide - Page 5
    Print quality guide Page 5 of 18 Action Yes Step 3 a Depending on your operating system, specify the paper size from Printing Preferences or from the Print dialog. b Resend the print job. The problem is solved. No Contact customer support. Are the margins correct? Paper curl Action Step 1
  • Lexmark CS410 | Print Quality Guide - Page 6
    to step 2. a Move the width and length guides in the tray to the correct positions for the size of the paper loaded in the tray. b Resend the print job. No The problem is solved. Do print irregularities still appear? Step 2 Go to step 3. From the printer control panel, set the paper size and
  • Lexmark CS410 | Print Quality Guide - Page 7
    Step 6 Replace the imaging kit, and then resend the print job. Do print irregularities still appear? Print is too dark Print quality guide Page 7 of 18 Yes Contact customer support. No The problem is solved. Action Step 1 a From the Quality menu on the printer control panel, select Color Adjust
  • Lexmark CS410 | Print Quality Guide - Page 8
    support. The problem is solved. Print is too light Action Step 1 a From the Quality menu on the printer control panel, select Color Adjust. b Resend the print job. Yes Go to step 2. Is the print still too light? Step 2 a From the Quality menu on the printer control panel, increase the toner
  • Lexmark CS410 | Print Quality Guide - Page 9
    the Paper menu to match the paper loaded in the tray Go to step 7. The problem is solved. Is the print still too light? Step 7 Replace the imaging kit, and then resend the print job. Contact customer support. The problem is solved. Is the print still too light? Printer is printing blank pages
  • Lexmark CS410 | Print Quality Guide - Page 10
    may cause print quality problems. Warning-Potential Damage: Do not touch the underside of the imaging kit. This could damage the imaging kit. b Resend the print job. Is the printer printing solid black pages? Step 2 Replace the imaging kit, and then resend the print job. Contact customer support
  • Lexmark CS410 | Print Quality Guide - Page 11
    Repeating defects appear on prints ) ) ) Print quality guide Page 11 of 18 Action Step 1 Measure the Replace the imaging kit, and then resend the print job. Do the repeating defects still appear? Shadow images appear on prints Leading edge AABBCCDD AABBCCDD Trailing edge Contact customer support
  • Lexmark CS410 | Print Quality Guide - Page 12
    Step 4 Replace the imaging kit, and then resend the print job. Contact customer support. Do shadow images still appear on prints? Skewed print No Load paper with the correct paper type and weight in the tray. Change the paper type and weight to match the paper loaded in the tray. The problem is
  • Lexmark CS410 | Print Quality Guide - Page 13
    10 minutes. Extended exposure to light may cause print quality problems. Warning-Potential Damage: Do not touch the underside of the imaging kit. This could damage the imaging kit. b Resend the print job. Do streaked horizontal lines appear on prints? No The problem is solved. Do one or more of
  • Lexmark CS410 | Print Quality Guide - Page 14
    Print quality guide Page 14 of 18 Action Step 5 Replace the imaging kit, and then resend the print job. Do streaked horizontal lines appear on prints? Yes Contact customer support. Streaked vertical lines appear on prints Leading edge ABCDE ABCDE ABCDE Trailing edge Action Yes Step 1 a
  • Lexmark CS410 | Print Quality Guide - Page 15
    cause print quality problems. Warning-Potential Damage: Do not touch the underside of the imaging kit. This could damage the imaging kit. b Resend the print job. Do streaked vertical lines appear on prints? Step 5 Replace the imaging kit, and then resend the print job. Contact customer support
  • Lexmark CS410 | Print Quality Guide - Page 16
    the paper loaded in the tray. From the Paper menu on Contact customer the printer control panel, support. set the paper texture. Transparency print quality is poor Action Yes Step 1 Go to step 2. From the printer control panel, set the paper type in the Paper menu to match the paper loaded
  • Lexmark CS410 | Print Quality Guide - Page 17
    Action Replace the imaging kit, and then resend the print job. Is the print density uneven? Vertical voids appear on prints Leading edge Print quality guide Page 17 of 18 Yes Contact customer support. No The problem is solved. Trailing edge Action Step 1 a Check if your software program is
  • Lexmark CS410 | Print Quality Guide - Page 18
    Print quality guide Page 18 of 18 Action Step 5 Replace the imaging kit, and then resend the print job. Do vertical voids appear on prints? Yes Contact customer support. No The problem is solved. Contacting customer support When you contact customer support, you will need to be able to describe
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
Print quality guide
If the solutions here do not correct the problem, then contact customer support.
Characters have jagged or uneven edges
Action
Yes
No
Step 1
a
Print a font sample list to check if the fonts you are using are supported by
the printer.
1
From the printer control panel, navigate to any of the following:
•
>
Reports
>
Print Fonts
•
Settings
>
Reports
>
Print Fonts
2
Select
PCL Fonts
or
PostScript Fonts
.
b
Resend the print job.
Are you using fonts that are supported by the printer?
Go to step 2.
Select a font that is
supported by the printer.
Step 2
Check if the fonts installed on the computer are supported by the printer.
Are the fonts installed on the computer supported by the printer?
The problem is solved.
Contact
customer
support
.
Clipped pages or images
Leading edge
Trailing edge
ABCDE
ABCDE
ABCDE
Print quality guide
Page 1 of 18