Lexmark CS410 Quick Reference

Lexmark CS410 Manual

Get Lexmark CS410 PDF manuals and user guides View all Lexmark CS410 manuals
Add to My Manuals
Save this manual to your list of manuals

Lexmark CS410 manual content summary:

  • Lexmark CS410 | Quick Reference - Page 1
    green Solid green Blinking red Printer status The printer is off or in Hibernate mode. The printer is warming up, processing data, or printing. The printer is on, but idle. The printer requires user intervention. Sleep button light color and its corresponding printer status Sleep button light Off
  • Lexmark CS410 | Quick Reference - Page 2
    is a user‑defined setting that lets you print on paper sizes that are not preset in the printer menus. Notes: • The smallest supported Universal then push the length guide tab at the back of the tray to extend it. 1 2 3 Squeeze the length guide tab, and then slide the guide to the correct position
  • Lexmark CS410 | Quick Reference - Page 3
    550‑sheet tray, and supports the same paper types and sizes. The only differences are the look of the guide tabs and the location of paper guides securely against the edges of the paper. 8 Insert the tray. 1 Length guide tab 2 Paper size indicator 3 Width guide tab 9 From the printer control
  • Lexmark CS410 | Quick Reference - Page 4
    surface. Warning-Potential Damage: Never use envelopes with stamps, clasps, snaps, windows, coated linings, or self‑stick adhesives. These envelopes may severely damage the printer. 5 4 3 1 Width guide tab 2 Maximum paper fill indicator 3 Width guide 4 Feeder extender 5 Paper size indicator
  • Lexmark CS410 | Quick Reference - Page 5
    : • Load envelope with the flap side up and against the right side of the paper guide. 2 Feed paper into the manual feeder only to the point where its leading edge can contact the paper guides. Note: To achieve the best possible print quality, use only high‑quality media designed for laser printers
  • Lexmark CS410 | Quick Reference - Page 6
    of numbers separated by periods, such as 123.123.123.123. • If you are using a proxy server, then temporarily disable it to load the Web page correctly. 2 Click Settings > Print Settings > Quality Menu > Toner Darkness. 3 Adjust the toner darkness, and then click Submit. Using the printer control
  • Lexmark CS410 | Quick Reference - Page 7
    Speed and Max Yield let you choose between a faster print speed or a higher toner yield. Max Yield is the factory default setting. • Max Speed-This lets you print in either black or color depending on what is set in the printer driver. The printer prints in color unless Black Only is selected in the
  • Lexmark CS410 | Quick Reference - Page 8
    Load paper as shown in the illustration. • Make sure the guides in the tray or the multipurpose feeder are properly positioned and are not pressing tightly against the paper or envelopes. • Push the tray firmly into the printer after loading paper. Use recommended paper • Use only recommended paper
  • Lexmark CS410 | Quick Reference - Page 9
    4 Close the front door. 3 Hold down the fuser cover, and then remove the jammed paper. Note: Make sure all paper fragments are removed. 5 From the printer control panel, touch to clear the message and continue printing. For non‑touch‑screen printer models, select Next > Clear the jam, press OK
  • Lexmark CS410 | Quick Reference - Page 10
    each side, and then gently pull it out. Note: Make sure all paper fragments are removed. 4 From the printer control panel, touch to clear the message and continue printing. For non‑touch‑screen printer models, select Next > Clear the jam, press OK, and then press to confirm. [x]‑page jam, open
  • Lexmark CS410 | Quick Reference - Page 11
    out the standard 250-sheet tray (Tray 1) and manual feeder. [x]‑page jam, clear multipurpose feeder 1 Push surface. 3 Insert the tray. 4 From the printer control panel, touch to clear the message and continue printing. For non‑touch‑screen printer models, select Next > Clear the jam, press
  • Lexmark CS410 | Quick Reference - Page 12
    3 Reload paper into the multipurpose feeder. 4 Slide the paper guide until it rests lightly against the edge of the paper stack. 5 From the printer control panel, touch to clear the message and continue printing. For non‑touch‑screen printer models, select Next > > Clear the jam, press OK > .
  • Lexmark CS410 | Quick Reference - Page 13
    page jam, open front door to clear duplex. 10 in fuser area 9 in manual feeder 11 in multipurpose feeder 11 in standard bin 8 Tray 1 11 Tray 2 11 print job canceling from the printer control panel 7 canceling, from computer 7 printer control panel arrow button 1 Back button 1 display 1 Home button
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
Quick Reference
Learning about the printer
Using the printer control panel
3
1
2
4
8
7
6
9
10
5
Use the
To
1
Display
•
View the printer status.
•
Set up and operate the printer.
2
Select button
•
Select menu options.
•
Save settings.
3
Arrow
buttons
Scroll through menus, or settings on the
display.
4
Keypad
Enter numbers, letters, or symbols.
5
Sleep button
Enable Sleep mode or Hibernate mode.
Notes:
•
Pressing any hard button, attaching a
device to a USB port, sending a print job,
or performing a power-on reset with the
main power switch wakes the printer
from Sleep mode.
•
Pressing the Sleep button or the power
switch will cause the printer to wake
from Hibernate mode.
6
Stop button
Stop all printer activity.
Use the
To
7
Back button
Return to the previous screen.
8
Home button
Go to the home screen.
9
Indicator light
Check the status of the printer.
10
USB port
Connect a camera or flash drive to the printer.
Understanding the colors of the indicator
and Sleep button lights
The colors of the indicator and Sleep button lights on the printer control
panel signify a certain printer status or condition.
Indicator light color and its corresponding printer status
Indicator light
Printer status
Off
The printer is off or in Hibernate mode.
Blinking green
The printer is warming up, processing data,
or printing.
Solid green
The printer is on, but idle.
Blinking red
The printer requires user intervention.
Sleep button light color and its corresponding printer status
Sleep button light
Printer status
Off
The printer is idle or in Ready state.
Solid amber
The printer is in Sleep mode.
Blinking amber
The printer is waking from or entering
Hibernate mode.
Blinking amber for 0.1
second, then goes
completely off for 1.9
seconds in pulsing
pattern
The printer is in Hibernate mode.
Using the Embedded Web Server
Note:
This functionality is available only in network printers or
printers connected to print servers.
If the printer is installed on a network, then you can use the Embedded
Web Server to do the following:
•
View the virtual display of the printer control panel.
•
Check the status of the printer supplies.
•
Configure printer settings.
•
Configure network settings.
•
View reports.
To access the Embedded Web Server for your printer:
1
Obtain the printer IP address:
•
From the TCP/IP section in the Network/Ports menu
•
By printing a network setup page or menu settings page, and
then finding the TCP/IP section
Notes:
–
An IP address appears as four sets of numbers separated
by periods, such as 123.123.123.123.
–
If you are using a proxy server, then temporarily disable
it to load the Web page correctly.
2
Open a Web browser, and then type the printer IP address in the
address field.
3
Press
Enter
.
The Embedded Web Server page appears.
Loading paper and specialty
media
Setting the paper size and type
1
From the printer control panel, navigate to:
>
Settings
>
>
Paper Menu
>
>
Paper
Size/Type
>
2
Press the up or down arrow button to select the tray or feeder, and
then press
.
3
Press the up or down arrow button to select the paper size, and
then press
.
1