Lexmark M1242 Quick Reference

Lexmark M1242 Manual

Get Lexmark M1242 PDF manuals and user guides View all Lexmark M1242 manuals
Add to My Manuals
Save this manual to your list of manuals

Lexmark M1242 manual content summary:

  • Lexmark M1242 | Quick Reference - Page 1
    separately. Keep all other trays closed until needed. 1 Remove the tray. Note: To avoid paper jams, do not remove trays while the printer is busy. 2 Adjust the paper guides to match the size of the paper that you are loading. • Load letterhead faceup with the bottom edge of the sheet toward the
  • Lexmark M1242 | Quick Reference - Page 2
    2 Adjust the guide to match the size of the paper that you are loading. 3 Flex, the settings. 3 Print the document. Note: For details of the function of the printer driver, refer to the Help of the printer driver. Maintaining the printer Replacing the toner cartridge 1 Open door A. 2 Remove the used
  • Lexmark M1242 | Quick Reference - Page 3
    three times to redistribute the toner. Replacing the imaging unit 1 Open door A. 3 Remove the used imaging unit. 4 Insert the new toner cartridge. Note: Use the arrows inside the printer as guides. 2 Remove the toner cartridge. 5 Close door A. 3 4 Unpack the new imaging unit, and then shake it
  • Lexmark M1242 | Quick Reference - Page 4
    the tray. Load paper as shown in the illustration. 5 Insert the new imaging unit. Note: Use the arrows inside the printer as guides. 6 Insert the toner cartridge. Note: Use the arrows inside the printer as guides. 7 Close door A. Clearing jams Avoiding jams Load paper properly • Make sure that
  • Lexmark M1242 | Quick Reference - Page 5
    feeder 5 Door A 2 Open door A. 5 3 Remove the toner cartridge. 4 Remove the imaging unit. Warning-Potential Damage: Do not expose the imaging unit to direct light for more than 10 minutes. Extended exposure to light may cause print quality problems. Warning-Potential Damage: Do not touch the
  • Lexmark M1242 | Quick Reference - Page 6
    touching it. Note: Make sure that all paper fragments are removed. 6 Insert the imaging unit. Note: Use the arrows inside the printer as guides. 6 7 Insert the toner cartridge. Note: Use the arrows inside the printer as guides. 8 Close door A. 9 Insert the tray. Paper jam in the rear door 1 Open
  • Lexmark M1242 | Quick Reference - Page 7
    2 Remove the jammed paper. Note: Make sure that all paper fragments are removed. Paper jam in the duplex unit 1 Remove the tray. 3 Insert the tray. 3 Close the rear door. Paper jam in the standard bin Remove the jammed paper. Note: Make sure that all
  • Lexmark M1242 | Quick Reference - Page 8
    sure that all paper fragments are removed. 3 Flex, fan, and align the paper edges before loading. 4 Reload paper, and then adjust the paper guide. 3 Insert the tray. Paper jam in the multipurpose feeder 1 Remove paper from the multipurpose feeder. 2 Remove the jammed paper. Note: Make sure that
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
Quick Reference
Loading paper
Loading trays
CAUTION—TIPPING HAZARD:
To reduce the risk of
equipment instability, load each tray separately. Keep all
other trays closed until needed.
1
Remove the tray.
Note:
To avoid paper jams, do not remove trays while the
printer is busy.
2
Adjust the paper guides to match the size of the paper that you
are loading.
3
Flex, fan, and align the paper edges before loading.
4
Load the paper stack with the printable side facedown, and
then make sure that the side guides fit snugly against the
paper.
Notes:
•
Load letterhead facedown with the top edge of the
sheet toward the front of the tray for one
‑
sided printing.
•
Load letterhead faceup with the bottom edge of the
sheet toward the front of the tray for two
‑
sided printing.
•
Do not slide paper into the tray.
•
To avoid paper jams, make sure that the stack height is
below the maximum paper fill indicator.
5
Insert the tray.
If necessary, set the paper size and paper type from the control
panel to match the paper loaded.
Loading the multipurpose feeder
1
Open the multipurpose feeder.
1