Lexmark M1246 Quick Reference
Lexmark M1246 Manual
View all Lexmark M1246 manuals
Add to My Manuals
Save this manual to your list of manuals |
Lexmark M1246 manual content summary:
- Lexmark M1246 | Quick Reference - Page 1
separately. Keep all other trays closed until needed. 1 Remove the tray. Note: To avoid paper jams, do not remove trays while the printer is busy. 2 Adjust the paper guides to match the size of the paper that you are loading. 4 Load the paper stack with the printable side facedown, and then make - Lexmark M1246 | Quick Reference - Page 2
multipurpose feeder 1 Open the multipurpose feeder. 2 Adjust the guide to match the size of the paper that adjust the settings. 3 Print the document. Note: For details of the function of the printer driver, refer to the Help of the printer driver. Maintaining the printer Replacing the toner cartridge - Lexmark M1246 | Quick Reference - Page 3
Remove the toner cartridge. 3 Unpack the new toner cartridge, and then shake it three times to redistribute the toner. 5 Close door A. Replacing the imaging unit 1 Open door A. 3 Remove the used imaging unit. 4 Insert the new toner cartridge. Note: Use the arrows inside the printer as guides. 3 - Lexmark M1246 | Quick Reference - Page 4
problems. Warning-Potential Damage: Do not touch the photoconductor drum. Doing so may affect the quality of future print jobs. 6 Insert the toner cartridge. Note: Use the arrows inside the printer as guides Insert the new imaging unit. Note: Use the arrows inside the printer as guides. 7 Close - Lexmark M1246 | Quick Reference - Page 5
cleared. Check your printed output for blank pages. • When Jam Recovery is set to On or Auto, the printer reprints jammed pages. Jam location 1 Standard bin 2 Rear door 3 Tray [x] 4 Multipurpose feeder 5 Door A Paper jam in door A 1 Remove the tray. 2 Open door A. 3 Remove the toner cartridge. 5 - Lexmark M1246 | Quick Reference - Page 6
cause print quality problems. Warning-Potential Damage: Do not touch the photoconductor drum. Doing so may affect the quality of future print jobs. 7 Insert the toner cartridge. Note: Use the arrows inside the printer as guides. 5 Remove the jammed paper. 6 Insert the imaging unit. Note: Use the - Lexmark M1246 | Quick Reference - Page 7
2 Remove the jammed paper. Note: Make sure that all paper fragments are removed. Paper jam in the duplex unit 1 Remove the tray. 3 Insert the tray. 3 Close the rear door. Paper jam in the standard bin Remove the jammed paper. Note: Make sure that all - Lexmark M1246 | Quick Reference - Page 8
paper edges before loading. 2 Remove the jammed paper. Note: Make sure that all paper fragments are removed. 4 Reload paper, and then adjust the paper guide. 3 Insert the tray. Paper jam in the multipurpose feeder 1 Remove paper from the multipurpose feeder. 2 Remove the jammed paper. Note: Make
Quick Reference
Loading paper
Loading trays
CAUTION—TIPPING HAZARD:
To reduce the risk of
equipment instability, load each tray separately. Keep all
other trays closed until needed.
1
Remove the tray.
Note:
To avoid paper jams, do not remove trays while the
printer is busy.
2
Adjust the paper guides to match the size of the paper that you
are loading.
3
Flex, fan, and align the paper edges before loading.
4
Load the paper stack with the printable side facedown, and
then make sure that the side guides fit snugly against the
paper.
Notes:
•
Load letterhead facedown with the top edge of the
sheet toward the front of the tray for one
‑
sided printing.
•
Load letterhead faceup with the bottom edge of the
sheet toward the front of the tray for two
‑
sided printing.
•
Do not slide paper into the tray.
•
To avoid paper jams, make sure that the stack height is
below the maximum paper fill indicator.
5
Insert the tray.
If necessary, set the paper size and paper type from the control
panel to match the paper loaded.
1