Lexmark MS521 Quick Reference

Lexmark MS521 Manual

Get Lexmark MS521 PDF manuals and user guides View all Lexmark MS521 manuals
Add to My Manuals
Save this manual to your list of manuals

Lexmark MS521 manual content summary:

  • Lexmark MS521 | Quick Reference - Page 1
    the size of the paper that you are loading. 4 Load the paper stack with the printable side facedown, and then make sure that the side guides fit snugly against the paper. 3 Flex, fan, and align the paper edges before loading. Notes: • Load letterhead facedown with the top edge of the sheet toward
  • Lexmark MS521 | Quick Reference - Page 2
    multipurpose feeder 1 Open the multipurpose feeder. 2 Adjust the guide to match the size of the paper that you are loading document. Note: For details of the function of the printer driver, refer to the Help of the printer driver. Maintaining the printer Replacing the toner cartridge 1 Open door A.
  • Lexmark MS521 | Quick Reference - Page 3
    Remove the toner cartridge. 3 Unpack the new toner cartridge, and then shake it three times to redistribute the toner. 5 Close door A. Replacing the imaging unit 1 Open door A. 3 Remove the used imaging unit. 4 Insert the new toner cartridge. Note: Use the arrows inside the printer as guides. 3
  • Lexmark MS521 | Quick Reference - Page 4
    : Do not expose the imaging unit to direct light for more than 10 minutes. Extended exposure to light may cause print quality problems. Warning-Potential Damage: Do not touch the photoconductor drum. Doing so may affect the quality of future print jobs. 6 Insert the toner cartridge. Note: Use the
  • Lexmark MS521 | Quick Reference - Page 5
    printer reprints jammed pages. Jam location 1 Standard bin 2 Rear door 3 Tray [x] 4 Multipurpose feeder 5 Door A Paper jam in door A 1 Remove the tray. 2 Open door A. 3 Remove the toner cartridge. 5
  • Lexmark MS521 | Quick Reference - Page 6
    cause print quality problems. Warning-Potential Damage: Do not touch the photoconductor drum. Doing so may affect the quality of future print jobs. 7 Insert the toner cartridge. Note: Use the arrows inside the printer as guides. 5 Remove the jammed paper. 6 Insert the imaging unit. Note: Use the
  • Lexmark MS521 | Quick Reference - Page 7
    2 Remove the jammed paper. Note: Make sure that all paper fragments are removed. Paper jam in the duplex unit 1 Remove the tray. 3 Insert the tray. 3 Close the rear door. Paper jam in the standard bin Remove the jammed paper. Note: Make sure that all
  • Lexmark MS521 | Quick Reference - Page 8
    edges before loading. 2 Remove the jammed paper. Note: Make sure that all paper fragments are removed. 4 Reload paper, and then adjust the paper guide. 3 Insert the tray. Paper jam in the multipurpose feeder 1 Remove paper from the multipurpose feeder. 2 Remove the jammed paper. Note: Make sure
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
Quick Reference
Loading paper
Loading trays
CAUTION—TIPPING HAZARD:
To reduce the risk of
equipment instability, load each tray separately. Keep all
other trays closed until needed.
1
Remove the tray.
Note:
To avoid paper jams, do not remove trays while the
printer is busy.
2
Adjust the paper guides to match the size of the paper that you
are loading.
3
Flex, fan, and align the paper edges before loading.
4
Load the paper stack with the printable side facedown, and
then make sure that the side guides fit snugly against the
paper.
Notes:
•
Load letterhead facedown with the top edge of the
sheet toward the front of the tray for one
‑
sided printing.
•
Load letterhead faceup with the bottom edge of the
sheet toward the front of the tray for two
‑
sided printing.
•
Do not slide paper into the tray.
•
To avoid paper jams, make sure that the stack height is
below the maximum paper fill indicator.
5
Insert the tray.
If necessary, set the paper size and paper type from the control
panel to match the paper loaded.
1