Lexmark MS610de Print Defects Guide

Print Defects Guide

Identifying supplies or parts for replacement

Match a set of repeating defects on a print job to the marks on one of the vertical lines. The line that best matches the defects

on the print job indicates which particular part is causing the defect.

Note:

The imaging unit is a customer replaceable unit. If the fuser needs replacement, then contact customer support at

or your service representative.

Replace fuser

Replace the imaging unit

80 mm

(3.15 in.)

97 mm

(3.82 in.)

47 mm

(1.85 in.)

38 mm

(1.5 in.)

Print Defects Guide

Page 1 of 1