Lexmark MS610dn Forms and Bar Code Card Technical Reference Guide
Lexmark MS610dn Manual
View all Lexmark MS610dn manuals
Add to My Manuals
Save this manual to your list of manuals |
Lexmark MS610dn manual content summary:
- Lexmark MS610dn | Forms and Bar Code Card Technical Reference Guide - Page 1
Forms and Bar Code Card 3.3 Technical Reference Manual October 2012 www.lexmark.com - Lexmark MS610dn | Forms and Bar Code Card Technical Reference Guide - Page 2
support, visit support.lexmark.com. For information on supplies and downloads, visit www.lexmark.com. If you don't have access to the Internet, you can contact Lexmark by mail: Lexmark International, Inc. Bldg 004-2/CSC 740 New Circle Road NW Lexington, KY 40550 References in this publication - Lexmark MS610dn | Forms and Bar Code Card Technical Reference Guide - Page 3
AG and/or its subsidiaries Microsoft Corporation All other trademarks are the property of their respective owners. © 2012 Lexmark International, Inc. All rights reserved. UNITED STATES GOVERNMENT RIGHTS This software and any accompanying documentation provided under this agreement are commercial - Lexmark MS610dn | Forms and Bar Code Card Technical Reference Guide - Page 4
Lexmark PCL 5 and PostScript bar codes 13 SAP support 17 Chapter 4: PCL 5 emulation: HP 18 One-dimensional bar codes 18 Defining characteristics 18 Command structure considerations 18 Transparent print data command 19 Returning to normal text printing 19 PCL 5 emulation escape sequences - Lexmark MS610dn | Forms and Bar Code Card Technical Reference Guide - Page 5
5: PCL 5 emulation: Lexmark 36 New PCL 5 commands to support bar codes 36 Bar code descriptor ESC&x#W[descriptor data 36 Transfer bar code data ESC&y#W[ PDF417 (Lexmark 55 Bar code descriptor for MaxiCode 59 Bar code descriptor for MicroPDF417 60 Composite bar codes 63 PCL specifications for - Lexmark MS610dn | Forms and Bar Code Card Technical Reference Guide - Page 6
104 Features ...104 Adding fonts to existing printer objects 104 Loading forms to a flash drive downloading formsets 106 Enhanced page delimiters 106 Fax and e-mail merged output 106 Select ports that Forms Card listens to 106 Use forms stored on a flash drive 107 RFID support 107 Printing - Lexmark MS610dn | Forms and Bar Code Card Technical Reference Guide - Page 7
Printing errors 110 Forms files on printer directory 111 Chart support 111 Better handling of SAP RDI Variables 111 Limitations 111 Appendix A: Feature Summary 112 Appendix B: Supported 167 PDF417 image widths and heights 168 MaxiCode capacity 168 Bar code horizontal alignment 169 PDF417 - Lexmark MS610dn | Forms and Bar Code Card Technical Reference Guide - Page 8
Uploading formsets when the OFIS data filter is disabled 172 French Postal 3 of 9 dimensions 173 Table of Contents 8 - Lexmark MS610dn | Forms and Bar Code Card Technical Reference Guide - Page 9
MB on-board user flash • Forms Card: - Adding fonts to existing printer objects - Loading Forms cc and bcc to e-mail - Printing, e-mailing, and/or faxing AS400 filter as well as a new option to the PJL LSETINPUTFILTER command - Removing Merge Mode when downloading formsets • Bar code: - - Lexmark MS610dn | Forms and Bar Code Card Technical Reference Guide - Page 10
with SAPScript in SAP R/3 applications. A supported printer with the Forms and Bar Code Card includes support for: • RFID • Built-in 256MB flash partition • Storing and printing forms from an optional flash drive or from optional or standard printer hard disk • Creating electronic forms to be - Lexmark MS610dn | Forms and Bar Code Card Technical Reference Guide - Page 11
Lexmark Confidential until announced The incoming data is analyzed for valid parameters, such as string length and applications are installed and running to create and manage forms. • For more information on using RFID when printing forms, see the Forms Composer documentation. Product description 11 - Lexmark MS610dn | Forms and Bar Code Card Technical Reference Guide - Page 12
techniques: 1 Standard PCL 5 font selection commands (used in the HP BarDIMM Pro products) 2 Special Lexmark advanced PCL 5 commands for bar codes Cursor positioning Cursor positioning is set as follows when printing with the Forms and Bar Code Card: • From the current cursor position, bar code - Lexmark MS610dn | Forms and Bar Code Card Technical Reference Guide - Page 13
, compression is automatically performed before printing the bar code. Checksum calculation character(s) according to the symbology specifications. Fixed length data formats can version 3.3a option. Supported Lexmark PCL 5 and PostScript bar codes The following is a list of supported one-dimensional - Lexmark MS610dn | Forms and Bar Code Card Technical Reference Guide - Page 14
• EAN/JAN-8 • EAN/JAN-8 with 2-digit supplemental • EAN/JAN-8 with 5-digit supplemental • EAN/JAN-13 • EAN/JAN-13 with 2-digit supplemental • EAN/JAN-13 with 5-digit supplemental • EAN-128 • French Postal 3 of 9 A/R • German Postal 2 of 5 (Leitcode and Identicode) • HIBC 39/128 • Interleaved 2 of 5 - Lexmark MS610dn | Forms and Bar Code Card Technical Reference Guide - Page 15
• USPS Tray label, 10-digit 2 of 5 • USPS Sack label, 8-digit 2 of 5 • USPS Zebra code • RSS-14 Expanded • RSS-14 Limited • RSS-14 Stacked • RSS-14 Truncated The following is a list of supported composite bar codes: • EAN-8 • EAN/JAN-8 with 2-digit supplemental • EAN/JAN-8 with 5-digit supplemental • - Lexmark MS610dn | Forms and Bar Code Card Technical Reference Guide - Page 16
quarter inch regular • Code 3 of 9 small high regular • Code 3 of 9 small low regular • Code 3 of 9 smalll medium regular • Code 3 of 9 slim regular • half • UPC half narrow The following is a list of supported fonts that resides in the option card: A. Scalable • Architext CMC7 • CMC7 • Electrical - Lexmark MS610dn | Forms and Bar Code Card Technical Reference Guide - Page 17
descriptor header. The first two bytes are required. The remaining bytes are optional. If those bytes are not sent, then the settings are set to appropriate defaults. The # symbol represents the number of bytes of descriptor data. Transfer bar code data-ESC&y#W [bar code data] This command is used - Lexmark MS610dn | Forms and Bar Code Card Technical Reference Guide - Page 18
value is one of those given, then special bar code generation firmware will process the font selection command. Otherwise, PCL 5 emulation proceeds (s#V Esc(s#B Esc(s#S Characteristic Determines the location of human-readable text printed with the bar code. Selects the font used for human-readable - Lexmark MS610dn | Forms and Bar Code Card Technical Reference Guide - Page 19
command, where "•" is the character associated with decimal code 7 in the PC-8 symbol set. Returning to normal text printing To ensure a proper return from bar code printing to normal text printing, PCL 5 emulation escape sequences that generate bar codes must be immediately followed by an escape - Lexmark MS610dn | Forms and Bar Code Card Technical Reference Guide - Page 20
above bar code Add the preceding values to the following numbers to produce the intended effect: 10 = 10 = 20 = 100 = Prints UPC-A checksum on the middle left of the bar code instead of the bottom left Prints start/stop * characters with Code 3 of 9 text Formats German postal bar codes - Lexmark MS610dn | Forms and Bar Code Card Technical Reference Guide - Page 21
Code 128, require all four values. 1 = First (narrowest) width 2 = Second width 3 = Third width 4 = Fourth width Example: Esc(s4p8,16,24,32s8,16,24,32b24700T Selects Code 128 autoswitch with text printed under the bar code, space widths set to 8, 16, 24, and 32 dots, and bar widths - Lexmark MS610dn | Forms and Bar Code Card Technical Reference Guide - Page 22
or Function/Parameters (#v units are in 1/72"; #b, s units are in 1/600") - N odd Yes digit 24642 German Postal 2 of 5 Leitcode 72.0 124 10 30 - - N 13 Yes 1 For all bar code symbologies, the default checksum character 3 Checksum character is always printed if embedded text is specified. * = - Lexmark MS610dn | Forms and Bar Code Card Technical Reference Guide - Page 23
s4 24643 German Postal 2 of 5 Identcode 72.0 124 10 30 - - N 11 24644 USPS tray label, 10-digit 2 of 50.4* 4 9 27 - - N 10 5 24645 USPS sack label, 8-digit 2 of 50 2 Does not include checksum character 3 Checksum character is always printed if embedded text is specified. 6 12 18 24 M - - Lexmark MS610dn | Forms and Bar Code Card Technical Reference Guide - Page 24
Command Esc(s#T or Function/Parameters (#v units are in 1/72"; #b, s units are in 1/600") (continued) Selects the bar (automatically sized Courier Bold). 2 Does not include checksum character 3 Checksum character is always printed if embedded text is specified. 8 16 24 32 N 13 * = Fixed value, - Lexmark MS610dn | Forms and Bar Code Card Technical Reference Guide - Page 25
units are in 1/600") (continued) Selects the bar code symbology Default parameters1 AEC)s#T Typeface # Bar code symbology #v #p #b1, #b2, #b3, #b4, s1 s2 s3 s4 24814 RSS-14 limited 10 text is never printed with these bar codes. In relation to the fields of the Lexmark bar code descriptor for - Lexmark MS610dn | Forms and Bar Code Card Technical Reference Guide - Page 26
of the Lexmark bar code units): Bar Pitch (in bars per inch): Tracker Height (in 1/100 mm units): Ascender, Descender Offset (in 1/100 mm units a USPS tray label bar code to visually identify trays containing bar width of the bar refers to the width of of the last bar when printing is complete. • If the - Lexmark MS610dn | Forms and Bar Code Card Technical Reference Guide - Page 27
///////// ///////// Esc&k2H||||||||| ||||||||| Selects PC-8 symbol set Selects 4.5 cpi fixed-space Courier font Prints slashes. This command contains four groups of nine Note: Forms and Bar Code Card does not support the RSS Stacked Omnidirectional bar code. One-dimensional bar codes 27 - Lexmark MS610dn | Forms and Bar Code Card Technical Reference Guide - Page 28
0D (hex) Limited: 10 (dec) or 0A (hex) Expanded: 34 (dec) or 22 (hex) 8,16,24,32 (dec) or 8,10,18,20 (hex) Optional Selects the height of the bars in 1/72" (same units as fonts). Note: Values lesser than the minimum uses the corresponding default value for the specific RSS bar code type. Optional - Lexmark MS610dn | Forms and Bar Code Card Technical Reference Guide - Page 29
10,18,20 (hex) 0 (dec) or 00 (dec) Description Optional Selects the width of the spaces. Optional specification values. • Each of the V parameter values is considered in the RSS-14 AIM specification Forms and Bar Code Card. Setting S1 to any value does not used by the Postal Service to sort and track - Lexmark MS610dn | Forms and Bar Code Card Technical Reference Guide - Page 30
Default (if not specified) Description n/a Required 24775T 1 Optional. This determines the location of human-readable text printed with the bar code. Note: Intelligent Mail uses only the values 1, 4, and 5. Other values not specified will be replaced with 1. One-dimensional bar codes 30 - Lexmark MS610dn | Forms and Bar Code Card Technical Reference Guide - Page 31
) n/a Esc Int Minimum: 16 (dec) or 10 (hex) (s#1,#2,[#3]V 3 (dec) or 03 (hex) Optional Selects bar height bar height to 1/72" (same units as fonts) Note: Values from 0 to 2 are the same as the default. Optional the ELMICRON specification. In the HP BarDIMM Pro specification, the Codablock - Lexmark MS610dn | Forms and Bar Code Card Technical Reference Guide - Page 32
HP documents the bar widths (B parameter) in their reference manual, but varying B1 or B2 does not affect the use up more memory. Description Required 24820T Optional Small module height in dots (1/600 as using a value of 10 (default). Notes: • HP BarDIMM specification contains only the PCL "B" - Lexmark MS610dn | Forms and Bar Code Card Technical Reference Guide - Page 33
manually set rows and columns. 3 The default choice (0) sets the symbol to the necessary size to capture the encoding data. The optional choice (1) uses the values in parameters #1 and #2 to set Transfer Bar Code Descriptor command to print PDF417 symbols. In relation to the fields of the Lexmark - Lexmark MS610dn | Forms and Bar Code Card Technical Reference Guide - Page 34
the symbols and :) • 3 = JIS 8-bit character set • 4 = Kanji character set (shifted JIS) Bar code descriptor for MaxiCode data The data sent when using this technique for printing MaxiCode symbols follows the same rules that exist for data sent using the Lexmark Transfer Bar Code Data command to - Lexmark MS610dn | Forms and Bar Code Card Technical Reference Guide - Page 35
In relation to the fields of the Lexmark bar code descriptor for MaxiCode, the following correspondences exist when using this technique: Mode: Specified in the data The Typeface (Esc (s#T) value for MaxiCode is 24800. Two-dimensional bar codes 35 - Lexmark MS610dn | Forms and Bar Code Card Technical Reference Guide - Page 36
descriptor header. The first two bytes are required. The remaining bytes are optional. If those bytes are not sent, then the settings are set to appropriate defaults. The number of bytes of descriptor data is indicated by #. Transfer bar code data ESC&y#W[bar code data] This command is used to - Lexmark MS610dn | Forms and Bar Code Card Technical Reference Guide - Page 37
the second bar width in bar dimension units (#b2 parameter) Specifies the second space width in bar dimension units (#s2 parameter) Specifies the third bar width in bar dimension units (#b3 parameter) Specifies the third space width in bar dimension units (#s3 parameter) PCL 5 emulation: Lexmark 37 - Lexmark MS610dn | Forms and Bar Code Card Technical Reference Guide - Page 38
Description Specifies the fourth bar width in bar dimension units (#b4 parameter) Specifies the fourth space width in bar dimension units (#s4 parameter) Lexmark symbology assignments This table describes both new and existing Lexmark symbology assignments: Bar code type 2-D bar code 2-D bar code - Lexmark MS610dn | Forms and Bar Code Card Technical Reference Guide - Page 39
) 18 (hex) Sets the number of bars that print per inch 4 Tracker Height 100-160 (dec) 64-A0 (hex) 130 (dec) 82 (hex) Sets the tracker height to Sets the encoding table 8-15 Reserved - - - Note: The bar code data sent with Australian Post consists of an 8-digit DPID, followed by an optional - Lexmark MS610dn | Forms and Bar Code Card Technical Reference Guide - Page 40
Default value Description 3 Bar Pitch 20-24 (dec) 14-18 (hex) 22 (dec) 16 (hex) Sets the number of bars that print per inch 4 Tracker Height 102-152 (dec) 66-98 (hex) 127 (dec) 7F (hex) Sets the tracker height to 1/100 mm 5 Ascender, 160-216 (dec) Descender Offset A0-D8 (hex) 188 - Lexmark MS610dn | Forms and Bar Code Card Technical Reference Guide - Page 41
Sets overall bar code size This value called "a" is a unit-less value multiplying factor used below in other parameters. 3 Bar Width 0.5a-0.7a 0.6a Set as part of Sets the bar width to 1/100 mm Sets the number of bars that print per inch Sets the synchronization bar height to 1/100 mm Sets - Lexmark MS610dn | Forms and Bar Code Card Technical Reference Guide - Page 42
(4 digits followed by 2 letters), followed optionally by a 1-5-digit house/postbox/freepost number, extension (letters or digits). • For foreign addresses, data may consist of a 2-letter ISO any error message. FIM symbols are printed according to the USPS specification. Bar height is fixed at 5/8 - Lexmark MS610dn | Forms and Bar Code Card Technical Reference Guide - Page 43
Swiss Postal Byte 0-1 2 3 4 5 6-7 8 9-10 11-12 13-14 15-16 17-18 19-20 21-22 23-24 25-31 Field name Symbology ID Text Location Text Typeface Text Style Bar Height Units Bar Height Bar/Space Width Units Bar Width #1 (Module Width) Space Width #1 Bar Width #2 Space Width #2 Bar Width #3 Space Width - Lexmark MS610dn | Forms and Bar Code Card Technical Reference Guide - Page 44
anywhere in the data; they are ignored. Three "." characters are inserted automatically at the correct positions in the human-readable text printed with a Swiss Postal bar code symbol, separating the four components of the identification code. Invalid characters or lengths in the identification - Lexmark MS610dn | Forms and Bar Code Card Technical Reference Guide - Page 45
Range - 0-5 (dec) 00-05 (hex) 0-5 (dec) 00-05 (hex) 0-4 (dec) 00-04 (hex) 00-04 (hex) 6-7 Bar Height - 8 Bar/Space Width 00-04 (hex) Units 9-10 Bar Width #1 - 11-12 Space Width #1 - 13-14 Bar Width #2 - 15-16 Space Width #2 - 17-18 Bar Width #3 - 19-20 Space Width #3 - 21-22 Bar - Lexmark MS610dn | Forms and Bar Code Card Technical Reference Guide - Page 46
Bar/Space Width parameters assume new dimensions, based on the new units. In other words, the parameters are in "units", and if the "units" measurements change, so does the physical printed bar code. If any of the parameters are set to zero, then the default value assigned in the table is assumed - Lexmark MS610dn | Forms and Bar Code Card Technical Reference Guide - Page 47
Range - 0-5 (dec) 00-05 (hex) 0-5 (dec) 00-05 (hex) 0-4 (dec) 00-04 (hex) 00-04 (hex) 6-7 Bar Height - 8 Bar/Space Width 00-04 (hex) Units 9-10 Bar Width #1 - 11-12 Space Width #1 - 13-14 Bar Width #2 - 15-16 Space Width #2 - 17-18 Bar Width #3 - 19-20 Space Width #3 - 21-22 Bar - Lexmark MS610dn | Forms and Bar Code Card Technical Reference Guide - Page 48
and Bar/Space Width parameters assume new dimensions, based on the new units. In other words, the parameters are in "units", and if the "units" measurements change, so does the physical printed bar code. If any of the parameters are set to 0 (zero), then the default value assigned in the table is - Lexmark MS610dn | Forms and Bar Code Card Technical Reference Guide - Page 49
the HP #p parameter 0 (dec) 00 (hex) Optional Corresponds to the HP #h parameter 2 (dec) 02 (hex) Optional Specifies the font style used for HRT Note: Default font style for OCRB is Regular only. 0 or 2 (dec) Optional 00 or 02 (hex) Specifies units for bar height dimensions One-dimensional bar - Lexmark MS610dn | Forms and Bar Code Card Technical Reference Guide - Page 50
(dec) 5-27 (dec) Default value Description 240 (dec) 00 F0 (hex) Optional Corresponds to HP #v parameter in the specified Bar Height units Note: Values that go beyond the defined range are appropriately clipped and set to the minimum and maximum values. The default HIBC bar height is 0.4 inches - Lexmark MS610dn | Forms and Bar Code Card Technical Reference Guide - Page 51
not within the defined range, the value is set to default (Courier). Optional Specifies the font style used for HRT Note: Default font style for OCRB is Regular only. Optional Specifies units for bar height dimensions 756 (dec) 02 F4 (hex) Optional Corresponds to HP #v parameter in the specified - Lexmark MS610dn | Forms and Bar Code Card Technical Reference Guide - Page 52
) 00 or 02 (hex) Specifies units for bar and space 1=1/300" widths units 2=1/600" units 3=1/1200" units [int int] 12-24 (dec) 00 0C-00 18 (hex) 12 (dec) 00 0C (hex) Optional Note: Values that go beyond the defined range are appropriately clipped and set to the minimum and maximum values - Lexmark MS610dn | Forms and Bar Code Card Technical Reference Guide - Page 53
specified) 128 (dec) 00 80 (hex) 22 (dec) 16 (hex) Definition Specifies PLANET symbology Optional Sets the X dimension of the bar pitch Values less than 20 (dec) or 14 (hex) result in For more information on the specifications implemented on the PLANET code, see Appendix B and C of the USPS PLANET - Lexmark MS610dn | Forms and Bar Code Card Technical Reference Guide - Page 54
is the sum of this field and the tracker height. Optional. This determines the location of human-readable text printed with the bar code. Note: Intelligent Mail uses only the values 1, 4, and 5. Other values not specified will be replaced with 1. These bytes are ignored. Note: • Intelligent Mail is - Lexmark MS610dn | Forms and Bar Code Card Technical Reference Guide - Page 55
two bytes with values 00 and 03 (hex) or 0 and 3 (dec) signify the symbology. Optional Sets the units used in specifying any further parameters or dimensions. The default value is 1/600" (00 or 02 (hex)). Optional Sets the X dimension of the module (white or black rectangle) in 100th of an inch - Lexmark MS610dn | Forms and Bar Code Card Technical Reference Guide - Page 56
as 1890 (dec) or 07 62 (hex). The Units enumeration will be set to 02 or 00 (hex), and these two bytes will be 07 (hex) and 62 (hex). If not specified, then the Y dimension will become double that of the X dimension. Optional Manually set the number of symbol rows. Automatic operation specified by - Lexmark MS610dn | Forms and Bar Code Card Technical Reference Guide - Page 57
Supported values are 01x for 300 dpi units, 02x for 600 dpi units, and 03x for 1200 dpi units. X dimension, bytes 1 and 2: (Default = 0005x) These two bytes set the X dimension. To set . Rows: (Default = 00x) This can be used to manually set the number of symbol rows. Using aspect ratio, both rows - Lexmark MS610dn | Forms and Bar Code Card Technical Reference Guide - Page 58
be built with 8 rows (80 codewords / 10 columns). Columns: (Default = 00x) This can be used to manually set the number of symbol columns. Using aspect ratio, it is closest to 20 x 0.35, or 7. This example prints a PDF417 bar code with the following settings: • ECC Level 4 • X dimension = 8/600ths • - Lexmark MS610dn | Forms and Bar Code Card Technical Reference Guide - Page 59
Full symbol with enhanced error correction Reader program with standard error correction MaxiCode notes: Depending on the mode, the input data sent with the Transfer Bar Code Data command must follow these rules: • For all modes, the input data must start with a label-number field and number-of - Lexmark MS610dn | Forms and Bar Code Card Technical Reference Guide - Page 60
spec). Codes longer than 6 characters will be truncated. Codes shorter than 6 characters will be padded with spaces. • The country code and class of service must each be 3 digits in length and will be padded with leading zeros if necessary. • For modes 2 and 3, an optional specific and limited set - Lexmark MS610dn | Forms and Bar Code Card Technical Reference Guide - Page 61
32-126 and ASCII 9, 10 and 13. • Byte compaction mode is sometimes referred to as binary compaction support of NULL (hex 00) characters is not supported at this time, due to possible string termination issues within the printer 00 or 02 (hex) Optional Sets the units used in specifying any further - Lexmark MS610dn | Forms and Bar Code Card Technical Reference Guide - Page 62
as 1890 (dec) or 07 62 (hex). The Units enumeration will be set to 02 or 00 (hex), and these two bytes will be 07 and 62 (hex). If not specified, the Y dimension will become double that of the X dimension. 0 (dec) 00 (hex) Optional Manually set the number of symbol rows. Automatic operation is - Lexmark MS610dn | Forms and Bar Code Card Technical Reference Guide - Page 63
all scanning technologies, and so that 2D imagers can use the linear component as a and area CCD scanners, and with linear and rastering laser scanners. The following bar codes allow the addition of Reserved Reserved Note: The number system digit is usually printed to the left of the bar code. b - Lexmark MS610dn | Forms and Bar Code Card Technical Reference Guide - Page 64
produce incorrect data due to inconsistent scanning speed, print imperfections, or a host of other problems, it is useful to verify that the rest a variation of UPC-A which allows for a more compact bar code by eliminating extra zeros. Since the resulting UPC-E bar code is about half the size as an - Lexmark MS610dn | Forms and Bar Code Card Technical Reference Guide - Page 65
UPC-E uses the "left-hand odd" and "left-hand even" encoding character sets from the EAN-13 encoding standard. Check character 0 1 2 3 4 5 6 7 8 9 Number system 0 encoding EEEOOO EEOEOO EEOOEO EEOOOE EOEEOO EOOEEO EOOOEE EOEOEO EOEOOE EOOEOE Number system 1 encoding OOOEEE - Lexmark MS610dn | Forms and Bar Code Card Technical Reference Guide - Page 66
digit in UPC-A. An EAN-13 bar code has the following physical structure: a Left-hand guard bars, or start sentinel, encoded as 101 b The second character of the number system code, encoded as described in the following table c The five characters of the manufacturer code, encoded as described in the - Lexmark MS610dn | Forms and Bar Code Card Technical Reference Guide - Page 67
numbers, quantities, weights and many other attributes the user needs. Each AI tells the system what kind of programmed point-of-sale scanners. It can also be printed in multiple rows as a stacked symbol. RSS-14 . Any amount of data up to the maximum (refer to the AIM site) may be specified. For all - Lexmark MS610dn | Forms and Bar Code Card Technical Reference Guide - Page 68
Composite bar code sequence: (s36b24810T01234567890123|Lexmark(s0p12h10vsb4099T • Beginning with a RSS-14 24810T sequence • Followed by RSS-14 data "01234567890123" • Followed by a "|" pipe character • Followed by the Composite data string: "Lexmark" • Followed by a complete 4099T sequence - Lexmark MS610dn | Forms and Bar Code Card Technical Reference Guide - Page 69
PCL specifications for composite bar codes Field Name Type Range Default (if not specified) Definition Symbology ID int - - Required 24600T specifies UPC-A 24601T specifies UPC-A+2 24602T specifies - Lexmark MS610dn | Forms and Bar Code Card Technical Reference Guide - Page 70
Code 39 Low Regular Type Scalable Scalable Bitmap Bitmap Bitmap Scalable Scalable Scalable Scalable Scalable Scalable Scalable Scalable Scalable Resides In option card In option card In option card In option card In option card In printer In printer In printer In option card In option card In - Lexmark MS610dn | Forms and Bar Code Card Technical Reference Guide - Page 71
card UPC Tall Thin Scalable In option card UPC Half Scalable In option card UPC Half Narrow Scalable In option card UPC Half Thin Scalable In option card USPS POSTNET Bitmap In printer Note: To obtain the PCL 5 ESC sequences used to select these fonts, print the PCL 5 font list from - Lexmark MS610dn | Forms and Bar Code Card Technical Reference Guide - Page 72
printing characters) to a printer. The FREESCAPE emulation feature provides a way for these systems to redefine the escape character by substituting a user same sequence of commands. The tilde character (~) is the default AEC. To set an AEC with a PCL 5 sequence: Use either of the commands listed in - Lexmark MS610dn | Forms and Bar Code Card Technical Reference Guide - Page 73
To set an AEC from the printer control panel: 1 From the Bar code menu, select Alt ESC Code. 2 Select On to enable the AEC. 3 From the Bar code menu, select ESC Character. 4 Select an AEC from the menu. You can disable the AEC by setting Alt ESC Code to Off. FREESCAPE emulation 73 - Lexmark MS610dn | Forms and Bar Code Card Technical Reference Guide - Page 74
supported when a Forms and Bar Code Card is installed. These operators enable printing of bar code symbologies with user specified positioning Currentpoint positioning is set as follows when printing with the Forms and Bar Code Card: • From the currentpoint, bar code printing begins at the bottom - Lexmark MS610dn | Forms and Bar Code Card Technical Reference Guide - Page 75
or not, and if required, compression is automatically performed before printing the bar code. Checksum calculation Some bar code symbologies define checksum places the character(s) per the symbology specifications. Fixed length data formats can be sent with or without checksum - Lexmark MS610dn | Forms and Bar Code Card Technical Reference Guide - Page 76
operator). This is similar to the show operator. Example: (01234567890) barcodeshow This operation prints a UPC-A symbol starting at the currentpoint with the data half-embedded using the OCR-B font. The default quiet zone of - Lexmark MS610dn | Forms and Bar Code Card Technical Reference Guide - Page 77
100 and a trailing quiet zone of 200, a bar code height of 210, bars with widths of 10, 20, 30 and 40, and spaces with widths of 9, 18, 27 and 36. It also and the checksum character always prints when embedded text is specified so /PrintCheckChar is irrelevant. PostScript emulation operator 77 - Lexmark MS610dn | Forms and Bar Code Card Technical Reference Guide - Page 78
is 1/600 inch. Other valid values are 1/300, 1/1200, and 1/720 inch, which also applies to height and width units for any one-dimensional symbology. /Height integer Optional In /Units; the default value is based on the symbology, see "Values for /Symbology key" on page 80. /QuietZone [int int - Lexmark MS610dn | Forms and Bar Code Card Technical Reference Guide - Page 79
Key Type Definition /Special boolean Optional For UPC-A, the default value is false. • If value is set to false, then the checksum is printed at bottom left of the bar code. • If value is set to true, then the checksum is printed at middle left of the bar code. For Code 3 of 9, the default - Lexmark MS610dn | Forms and Bar Code Card Technical Reference Guide - Page 80
Command Function/parameters (/Height, /Bars and /Spaces units are in 1/600 inch) Selects the bar code include checksum character 3 Checksum character is always printed if embedded text is specified. 4 ISBN: 10 or 15, ISSN: 10, 12, or 15 (plus optional hyphens) 5 Except for the possibility of - Lexmark MS610dn | Forms and Bar Code Card Technical Reference Guide - Page 81
Command Function/parameters (/Height, /Bars and /Spaces units are in 1/600 inch) Selects the bar code include checksum character 3 Checksum character is always printed if embedded text is specified. 4 ISBN: 10 or 15, ISSN: 10, 12, or 15 (plus optional hyphens) 5 Except for the possibility of - Lexmark MS610dn | Forms and Bar Code Card Technical Reference Guide - Page 82
420* 1 9 27 2 of 5 N 8 /USPS-tray USPS tray label, 10-digit 420* 4 9 27 2 of 5 N 10 /USPS-zebra USPS Zebra code 225* 1* 1 For character 3 Checksum character is always printed if embedded text is specified. 4 ISBN: 10 or 15, ISSN: 10, 12, or 15 (plus optional hyphens) 5 Except for the - Lexmark MS610dn | Forms and Bar Code Card Technical Reference Guide - Page 83
. See "Values for /Symbology key" on page 80. Does not print text Prints embedded text Prints the text half embedded For ISBN and ISSN, this value is not allowed as the second array element. Prints text under the bar code Prints text above the bar code Values for /FontName key This determines - Lexmark MS610dn | Forms and Bar Code Card Technical Reference Guide - Page 84
attribute for HRT bold italic only one style How to use the symbology ID for ISBN and ISSN ISBN and ISSN bar codes are normally 10 digits in length (see the PCL 5 section above for a complete description), but they have extensions known as ISSN+2, ISSN+5, and ISBN+5. Obtaining these variants is - Lexmark MS610dn | Forms and Bar Code Card Technical Reference Guide - Page 85
bar code symbology Sets the bar width to 1/100 mm Sets the number of bars that print per inch Sets the tracker height to 1/100 mm Sets the ascender height. Sets the FCC 0 (dec) [integer] 150 150 (dec) [array of integers] - Sets the encoding table Optional Sets the quiet zone in /Units The value - Lexmark MS610dn | Forms and Bar Code Card Technical Reference Guide - Page 86
Key /QuietZone /Units Range [int int] - Default value 150 150 (dec) [array of integers] - Description Optional Sets the quiet zone in /Units. The value is 1/100 mm Post 4-State bar code descriptors 86 - Lexmark MS610dn | Forms and Bar Code Card Technical Reference Guide - Page 87
to 1/100 mm Sets the number of bars that print per inch Sets the tracker height to 1/100 mm Sets the ascender and descender offset in 1/ 100 mm The total height of an ascender or descender is the sum of this field and the tracker height. Optional Sets the quiet zone in /Units The value is 1/100 - Lexmark MS610dn | Forms and Bar Code Card Technical Reference Guide - Page 88
Description Identifies the bar code symbology Sets the bar width to 1/100 mm Sets the number of bars that print per inch Sets the synchronization bar height in 1/100 mm Sets the upward and downward bar height in 1/100 mm Optional Sets the quiet zone in /Units Optional The value is 1/100 mm Post - Lexmark MS610dn | Forms and Bar Code Card Technical Reference Guide - Page 89
If /WidthUnits is specified, then it takes precedence over /Units. Sets the bar width The default value is 11/600 inch. Sets the space width The default value is 11/600 inch. Optional Sets the quiet zone in /Units Optional The value is 1/600 inch /BarHeight must be: • Greater than or equal to 20 - Lexmark MS610dn | Forms and Bar Code Card Technical Reference Guide - Page 90
bar width in /Units Sets the number of bars that print per inch Sets the tracker height in /Units The value is fixed. Sets the ascender and descender offset in 1/100 mm The total height of an ascender or descender is the sum of this field and the tracker height. Optional This determines the location - Lexmark MS610dn | Forms and Bar Code Card Technical Reference Guide - Page 91
range are appropriately clipped and set to the minimum and maximum values. Optional Sets the space widths in /Units Note: Values beyond the defined range are appropriately clipped and set to the minimum and maximum values. Optional Defines if and where the HRT is printed Two-dimensional bar codes - Lexmark MS610dn | Forms and Bar Code Card Technical Reference Guide - Page 92
Maximum: [1200 1200] (dec) Default value /Courier-Bold [150 150] (dec) [96 96] (hex) Description Optional Defines how the HRT is printed When the value given is not within the defined range: • The value is set to default (/Courier-Bold) if it is of type name. • A TYPECHECK error will be returned - Lexmark MS610dn | Forms and Bar Code Card Technical Reference Guide - Page 93
where, Min=2.25 x Bar Width 1 and Max=3 x Bar Width 1. • Values beyond the defined range are appropriately clipped and set to the minimum and maximum values. Optional Sets the space widths in /Units Notes: • The range of values for Space Width 2 is dependent on the value of Space Width 1, where Min - Lexmark MS610dn | Forms and Bar Code Card Technical Reference Guide - Page 94
150] (dec) [96 96] (hex) Description Optional Defines if and where the HRT is to be printed Optional Defines how the HRT is to be printed When the value given is not within the defined range: • If the value is of type name, then the value will be set to default (/ Courier-Bold) • If the - Lexmark MS610dn | Forms and Bar Code Card Technical Reference Guide - Page 95
/width. Valid values are 0.1 to 10.0. Any value outside this range causes a value of 0.5 to be used. Example: For a height-to-width ratio of 2/3, set /AspectRatio equal to 0.67. Optional The value is 1/600 inch. Required Sets the module width in /Units. Specifies the X dimension (smallest element - Lexmark MS610dn | Forms and Bar Code Card Technical Reference Guide - Page 96
. A valid non-zero /Errorpercent value overrides /ErrorLevel. See "/Error Percent" on page 97. Optional This is not supported. Optional This is not supported. Optional The default value is false (no truncation). If the value is set to true, then the right row indicator and stop pattern are omitted - Lexmark MS610dn | Forms and Bar Code Card Technical Reference Guide - Page 97
150] 0 Definition Optional Sets the quiet zone in 1/600 inch. The default value is [150 150]. Optional This designates error correction or 7. This example prints a PDF417 bar code with the following settings: Sample01234 - Lexmark MS610dn | Forms and Bar Code Card Technical Reference Guide - Page 98
Optional Sets the ECC level to /L, /M, /Q, /H Optional Sets the QR encoding mode to /Numeric, /Alphanumeric, /ECI, /Byte, /Kanji, /Mixed Optional Sets the size of the module element in /Units. The minimum value supported code, country code, and class of service fields must follow the label fields. - Lexmark MS610dn | Forms and Bar Code Card Technical Reference Guide - Page 99
in code set A as defined in AIM spec). Codes longer than 6 characters are truncated. Codes shorter than 6 characters are padded with spaces. • The country code and class of service must each be 3 digits in length, padded with leading zeros, if necessary. • For modes 2 and 3, an optional ANSI Message - Lexmark MS610dn | Forms and Bar Code Card Technical Reference Guide - Page 100
) 1890 (dec) 07 62 (hex) 0 (dec) 00 (hex) 0 (dec) 00 (hex) Description Required Identifies the bar code symbology (/MicroPDF417) Optional /Units is used for /ModuleWidth and /ModuleHeight calculations. Optional Sets the X dimension of the module (white or black rectangle) in 100th of an inch. To - Lexmark MS610dn | Forms and Bar Code Card Technical Reference Guide - Page 101
key Minimum: [0 0] (dec) Maximum: [1200 1200] (dec) [150 150] (dec) [96 96] (hex) Description Optional Defines how the HRT is printed When the value given is not within the defined range: • The value is set to default (/Courier-Bold) if the value is of the type name. • A TYPECHECK error is - Lexmark MS610dn | Forms and Bar Code Card Technical Reference Guide - Page 102
Optional /Units is used in the calculations. /Height (linear component) int Dependent on the Dependent on the Optional module height range of the linear component. default module height of the linear component. Sets -A Composite example sequence: (12345678901|Lexmark) > - Lexmark MS610dn | Forms and Bar Code Card Technical Reference Guide - Page 103
FontName key /Courier-Bold Optional Defines how the HRT is printed When the value given is not within the defined range: • The value is set to default (/Courier- For example, this is a UPC-A Composite example sequence: (12345678901|Lexmark) > barcodeshow • UPC-A data begins - Lexmark MS610dn | Forms and Bar Code Card Technical Reference Guide - Page 104
to the instructions provided in the Forms and Bar Code Card User's Guide. Adding fonts to existing printer objects Users can add fonts to printer objects in Forms Manager without having to delete and then recreate the printer object. Loading forms to a flash drive Users can download forms to - Lexmark MS610dn | Forms and Bar Code Card Technical Reference Guide - Page 105
fax concurrently Users have the option to print a document that is being faxed or e-mailed. Note: This function is available only on multifunction printers that support e-mail and/or fax. New version of PDFlib In this release of the Forms and Bar Code Card, formsmerge and LDSS is updated to PDFlib - Lexmark MS610dn | Forms and Bar Code Card Technical Reference Guide - Page 106
only on multifunction printers that support e-mail and/or fax. Select ports that Forms Card listens to Users can select the printer input ports that Forms Card will listen to and perform merging on. This is accomplished through the Print Port Setting menu item. • If a port is set to Off, then - Lexmark MS610dn | Forms and Bar Code Card Technical Reference Guide - Page 107
that support RFID functionality. Printing all forms Users can print information about all the formsets stored on the printer, as well as some printer-specific information. This feature is accessible through the Print All Forms submenu. Note: If a ppf file exists for the formset, then the paper tray - Lexmark MS610dn | Forms and Bar Code Card Technical Reference Guide - Page 108
, the Forms Card applies a similar font file. • Not Supported-Forms Card does not print these fonts. Simplified Chinese is a supported DBCS (Double Byte Character Set) language. Two fonts are supported-SimHei and SimSun. For more information on supported and recognized fonts and font files, see the - Lexmark MS610dn | Forms and Bar Code Card Technical Reference Guide - Page 109
Bubble font This font is used for standardized testing forms that are optically read for grading purposes. It is available in Forms Composer when the font "OCRB in Bubbles" is used. The following is a character map for use while designing the formset. Bubble font 109 - Lexmark MS610dn | Forms and Bar Code Card Technical Reference Guide - Page 110
font list is richer than that of the printer, a user could easily create a form where not all characters will print. The user can stipulate a supported code page via Forms Composer. Five font families support the international character set. • Intl-Courier • Intl-CG Times • Intl-Univers • Arial - Lexmark MS610dn | Forms and Bar Code Card Technical Reference Guide - Page 111
in the formsmerge directory. These files are visible if the user prints a directory page from the printer control panel. These files must not be tampered with in any way. Chart support The Forms and Bar Code Card supports pie, horizontal/vertical (stacked and unstacked). Better handling of SAP - Lexmark MS610dn | Forms and Bar Code Card Technical Reference Guide - Page 112
on Y Forms Card NA NA Forms Card Features UTF-8, UTF-16 Y Y2 NA DBCS file names Y1 Y Y DBCS bold & italic Y Y NA 1 Supported when the printer control panel is set to a DBCS language 2 Limited UTF-8 and UTF-16 support (no Asian fonts or file names, etc.) 3 Requires an RFID-enabled - Lexmark MS610dn | Forms and Bar Code Card Technical Reference Guide - Page 113
on a flash Y drive NA NA NA Print all forms Y NA NA Y Vertical text centering Y Y NA Y Additional finishing options • Page reprint Y Y Y NA • subform activ. 1 Supported when the printer control panel is set to a DBCS language 2 Limited UTF-8 and UTF-16 support (no Asian fonts - Lexmark MS610dn | Forms and Bar Code Card Technical Reference Guide - Page 114
Composer v3.3.9 Document Forms Manager Producer v3.3.9 v3.3.9 Downloadable DBCS fonts Y NA NA Y Forms flash file Y Unit Y Y Y • SM Unit Condensed Y Y Y • SM Gothic Y Y Y • Roman Y Y Y • OCR B Y Y Y • PLANET Y Y Y 1 Supported when the printer control panel is set - Lexmark MS610dn | Forms and Bar Code Card Technical Reference Guide - Page 115
Forms Composer v3.3.9 LDSS Document Producer Lexmark Optra Forms Bar code name Sample image One-dimensional bar code symbologies Codabar Y Y Y Y Y supported by the Bar Code Card version 2.4 or later can be printed with Optra Forms when the bar code option is installed in the printer - Lexmark MS610dn | Forms and Bar Code Card Technical Reference Guide - Page 116
.3 LDSS Forms Composer v3.3.9 LDSS Document Producer Lexmark Optra Forms Bar code name Code 3 of 9 Sample image Y Y Y Y Y Y Y Code 3 of 9 + set to be encoded. 1 PDF417 and MaxiCode can be printed using Optra Forms only when the bar code option is also installed in the printer - Lexmark MS610dn | Forms and Bar Code Card Technical Reference Guide - Page 117
have been installed in Optra Forms. 2 All one-dimensional bar code symbologies supported by the Bar Code Card version 2.4 or later can be printed with Optra Forms when the bar code option is installed in the printer, and the accompanying bar code dictionaries is installed in Optra Forms. 3 These - Lexmark MS610dn | Forms and Bar Code Card Technical Reference Guide - Page 118
v3.3.9 LDSS Document Producer Lexmark Optra Forms Bar code name HIBC128, HIBC 39 Y3 Y Y Y3 Y Y Sample image Comments The HIBC (Health Industry Bar supported by the Bar Code Card version 2.4 or later can be printed with Optra Forms when the bar code option is installed in the printer - Lexmark MS610dn | Forms and Bar Code Card Technical Reference Guide - Page 119
v3.3.9 LDSS Document Producer Lexmark Optra Forms Bar code name Sample image Interleaved 2 of 5 Y Y of 5 optionally allows for a weighted Modulo 10 check supported by the Bar Code Card version 2.4 or later can be printed with Optra Forms when the bar code option is installed in the printer - Lexmark MS610dn | Forms and Bar Code Card Technical Reference Guide - Page 120
can include a Modulo 10 checksum. MSI Plessey bar code can include a Modulo 10 checksum, and may include a second checksum. If a second checksum is required, supported by the Bar Code Card version 2.4 or later can be printed with Optra Forms when the bar code option is installed in the printer, - Lexmark MS610dn | Forms and Bar Code Card Technical Reference Guide - Page 121
Document Producer Lexmark Optra Forms Bar code name Two-dimensional bar code symbologies Data Matrix Y3 Y Y Y3 Y Y Sample image Comments The supported by the Bar Code Card version 2.4 or later can be printed with Optra Forms when the bar code option is installed in the printer, - Lexmark MS610dn | Forms and Bar Code Card Technical Reference Guide - Page 122
Composer v3.3.9 LDSS Document Producer Lexmark Optra Forms Bar code name MaxiCode Sample image Y Y Y Y Y Y Y1 Comments MaxiCode is symbologies supported by the Bar Code Card version 2.4 or later can be printed with Optra Forms when the bar code option is installed in the printer, - Lexmark MS610dn | Forms and Bar Code Card Technical Reference Guide - Page 123
encoding the entire ASCII set. 1 PDF417 and MaxiCode can be printed using Optra Forms only when the bar code option is also installed in the printer, and when the accompanying bar code dictionaries have been installed in Optra Forms. 2 All one-dimensional bar code symbologies supported by the Bar - Lexmark MS610dn | Forms and Bar Code Card Technical Reference Guide - Page 124
v3.3.9 LDSS Document Producer Lexmark Optra Forms Bar code name QR Y Y Y Y Y Y Sample image Comments QR Code (Quick Response Code) is symbologies supported by the Bar Code Card version 2.4 or later can be printed with Optra Forms when the bar code option is installed in the printer, - Lexmark MS610dn | Forms and Bar Code Card Technical Reference Guide - Page 125
Document Producer Lexmark Optra Forms Bar code name Composite bar code symbologies Composite + UPC Y3 Y Y Y3 Y Y Sample image Comments An EAN/ supported by the Bar Code Card version 2.4 or later can be printed with Optra Forms when the bar code option is installed in the printer, - Lexmark MS610dn | Forms and Bar Code Card Technical Reference Guide - Page 126
LDSS Document Producer Lexmark Optra Forms Bar code name Composite + EAN Y3 Y Y Y3 Y Y Sample image Comments Composite + UCC/ Y3 Y Y Y3 Y Y EAN 1 PDF417 and MaxiCode can be printed using Optra Forms only when the bar code option is also installed in the printer, and when the - Lexmark MS610dn | Forms and Bar Code Card Technical Reference Guide - Page 127
Composer v3.3.9 LDSS Document Producer Lexmark Optra Forms Bar code name Composite + RSS-14 Y3 Y Y Y3 Y Y Sample image Comments 1 PDF417 and MaxiCode can be printed using Optra Forms only when the bar code option is also installed in the printer, and when the accompanying bar code - Lexmark MS610dn | Forms and Bar Code Card Technical Reference Guide - Page 128
LDSS Forms Composer v3.3.9 LDSS Document Producer Lexmark Optra Forms Bar code name EAN/JAN-8, JIS--S-UCC Sample image Y Y Y Y Y Y Y EAN/JAN-8 + supported by the Bar Code Card version 2.4 or later can be printed with Optra Forms when the bar code option is installed in the printer - Lexmark MS610dn | Forms and Bar Code Card Technical Reference Guide - Page 129
LDSS Forms Composer v3.3.9 LDSS Document Producer Lexmark Optra Forms Bar code name EAN/JAN-13, JIS-UCC Sample image Y Y Y Y Y Y Y EAN/JAN-13 + supported by the Bar Code Card version 2.4 or later can be printed with Optra Forms when the bar code option is installed in the printer - Lexmark MS610dn | Forms and Bar Code Card Technical Reference Guide - Page 130
Lexmark Optra Forms Bar code name Sample image EAN 128, UCC-128, Y Y Y Y Y Y Y EAN/UCC-128 Comments The EAN/UCC-128 specification uses the same code set supported by the Bar Code Card version 2.4 or later can be printed with Optra Forms when the bar code option is installed in the printer - Lexmark MS610dn | Forms and Bar Code Card Technical Reference Guide - Page 131
LDSS Document Producer Lexmark Optra Forms Bar code name RSS (Reduced Y3 Y Y Y3 Y Y Space Symbology) Sample image Comments RSS-14 is a symbologies supported by the Bar Code Card version 2.4 or later can be printed with Optra Forms when the bar code option is installed in the printer, - Lexmark MS610dn | Forms and Bar Code Card Technical Reference Guide - Page 132
LDSS Forms Composer v3.3.9 LDSS Document Producer Lexmark Optra Forms Bar code name UPC-A Sample image Y Y Y Y Y Y Y UPC-A + 2-digit supplemental supported by the Bar Code Card version 2.4 or later can be printed with Optra Forms when the bar code option is installed in the printer - Lexmark MS610dn | Forms and Bar Code Card Technical Reference Guide - Page 133
LDSS Forms Composer v3.3.9 LDSS Document Producer Lexmark Optra Forms Bar code name UPC-E Sample image Y Y Y Y Y Y Y UPC-E + 2-digit supplemental supported by the Bar Code Card version 2.4 or later can be printed with Optra Forms when the bar code option is installed in the printer - Lexmark MS610dn | Forms and Bar Code Card Technical Reference Guide - Page 134
Lexmark Optra Forms Bar code name Sample image a different set of start and data, allowing varying quantities of customer-specific data to be added to the basic supported by the Bar Code Card version 2.4 or later can be printed with Optra Forms when the bar code option is installed in the printer - Lexmark MS610dn | Forms and Bar Code Card Technical Reference Guide - Page 135
v3.3 LDSS Forms Composer v3.3.9 LDSS Document Producer Lexmark Optra Forms Bar code name Sample image Dutch Post 4-State Y Y Y Y Y Y Y2 bar code supported by the Bar Code Card version 2.4 or later can be printed with Optra Forms when the bar code option is installed in the printer - Lexmark MS610dn | Forms and Bar Code Card Technical Reference Guide - Page 136
have been installed in Optra Forms. 2 All one-dimensional bar code symbologies supported by the Bar Code Card version 2.4 or later can be printed with Optra Forms when the bar code option is installed in the printer, and the accompanying bar code dictionaries is installed in Optra Forms. 3 These - Lexmark MS610dn | Forms and Bar Code Card Technical Reference Guide - Page 137
Document Producer Lexmark Optra Forms Bar code name Sample image Singapore 4-State Y is used by the United States Postal Service (USPS) canceling machines supported by the Bar Code Card version 2.4 or later can be printed with Optra Forms when the bar code option is installed in the printer - Lexmark MS610dn | Forms and Bar Code Card Technical Reference Guide - Page 138
.3 LDSS Forms Composer v3.3.9 LDSS Document Producer Lexmark Optra Forms Bar code name Sample image USPS POSTNET Y Y Y Y Y Y Y2 5-digit ZIP Code supported by the Bar Code Card version 2.4 or later can be printed with Optra Forms when the bar code option is installed in the printer - Lexmark MS610dn | Forms and Bar Code Card Technical Reference Guide - Page 139
Document Producer Lexmark Optra Forms Bar code name USPS tray label 10-digit 2 of 5 Sample image Y Y Y Y Y Y Y2 Comments USPS tray label 10-digit 2 of supported by the Bar Code Card version 2.4 or later can be printed with Optra Forms when the bar code option is installed in the printer - Lexmark MS610dn | Forms and Bar Code Card Technical Reference Guide - Page 140
C Forms Card fonts Single-byte Forms Card fonts Font name AdobeSansMM AdobeSerifMM Albertus Extra Bold (W1) Albertus Medium (W1) Albertus MT Albertus MT Lt Albertus-ExtraBold Albertus-Medium AlbertusMT AlbertusMT-ExtraBold AlbertusMT-Italic AlbertusMT-Light AlbertusMT-Medium Antique Olive ( - Lexmark MS610dn | Forms and Bar Code Card Technical Reference Guide - Page 141
Font name AntiqueOlive-Italic AntiqueOlive-Roman Apple Chancery Apple-Chancery Apple-ChanceryCE Architext CMC7 Arial Arial Black Arial Bold Arial Bold Italic Arial Italic Arial-Bold Arial-BoldItalic Arial-BoldItalicMT Arial-BoldMT ArialCE ArialCE-Bold ArialCE-BoldItalic ArialCE-Italic Arial-Italic - Lexmark MS610dn | Forms and Bar Code Card Technical Reference Guide - Page 142
Font name AvantGarde-DemiOblique Bodoni Bodoni Poster Bodoni PosterCompressed Bodoni-Bold Bodoni-BoldItalic BodoniCE BodoniCE-Bold BodoniCE-BoldItalic BodoniCE-Italic BodoniCE-Poster BodoniCE-PosterCompressed Bodoni-Italic Bodoni-Poster Bodoni-PosterCompressed Bookman Bookman Demi Bookman Demi - Lexmark MS610dn | Forms and Bar Code Card Technical Reference Guide - Page 143
Font name CenturySchlbk-BoldItalic CenturySchlbk-Italic CenturySchlbk-Roman CG Omega (W1) CG Times (W1) CG Times (W1) Bold CG Times (W1) Bold Italic CG Times (W1) Italic CG Times (WE) CG Times (WE) Bold CG Times (WE) Bold Italic CG Times (WE) Italic CG Times (WG) CG Times (WG) Bold CG Times (WG) - Lexmark MS610dn | Forms and Bar Code Card Technical Reference Guide - Page 144
Font name CGOmega-Italic CG-Omega-Italic CGTimes CG-Times CGTimes-Bold CG-Times-Bold CGTimes-BoldItalic CG-Times-BoldItalic CGTimes-Italic CG-Times-Italic Chicago ChicagoCE Clarendon Clarendon Condensed (W1) Clarendon Light Clarendon-Bold ClarendonCE ClarendonCE-Bold ClarendonCE-Light Clarendon- - Lexmark MS610dn | Forms and Bar Code Card Technical Reference Guide - Page 145
Font name Courier New Courier New Bold Courier New Bold Italic Courier New Italic Courier-Bold Courier-BoldItalicTT Courier-BoldOblique Courier-BoldTT CourierCE CourierCE-Bold CourierCE-BoldOblique CourierCE-Oblique CourierHP CourierHP-Bold CourierHP-BoldItalic CourierHP-Italic Courier-ItalicTT - Lexmark MS610dn | Forms and Bar Code Card Technical Reference Guide - Page 146
Font name Garamond-Antiqua Garamond-Halbfett Garamond-Kursiv Garamond-KursivHalbfett Geneva GenevaCE GillSans GillSans Condensed GillSans ExtraBold GillSans Light GillSans-Bold GillSans-BoldCondensed GillSans-BoldItalic GillSansCE-Bold GillSansCE-BoldCondensed GillSansCE-BoldItalic GillSansCE- - Lexmark MS610dn | Forms and Bar Code Card Technical Reference Guide - Page 147
Font name Goudy-Italic Helvetica Helvetica Bold Helvetica Bold Italic Helvetica Condensed Helvetica Italic Helvetica-Black Helvetica-Black Bold Helvetica-Black Bold Italic Helvetica-BlackOblique Helvetica-Bold Helvetica-BoldItalic Helvetica-BoldOblique HelveticaCE HelveticaCE-Black HelveticaCE- - Lexmark MS610dn | Forms and Bar Code Card Technical Reference Guide - Page 148
Font name Helvetica-Light Helvetica-Light Italic Helvetica-LightOblique Helvetica-Narrow Helvetica-Narrow Bold Helvetica-Narrow Bold Italic Helvetica-Narrow Italic Helvetica-Narrow-Bold Helvetica-Narrow-BoldItalic Helvetica-Narrow-BoldOblique Helvetica-Narrow-Italic Helvetica-Narrow-Oblique - Lexmark MS610dn | Forms and Bar Code Card Technical Reference Guide - Page 149
Font name Intl-Univers-BoldItalic Intl-Univers-Condensed-Bold Intl-Univers-Condensed-BoldItalic Intl-Univers-Condensed-Medium Intl-Univers-Condensed-MediumItalic Intl-Univers-Medium Intl-Univers-MediumItalic JoannaMT JoannaMT-Bold JoannaMT-BoldItalic JoannaMTCE JoannaMTCE-Bold JoannaMTCE-BoldItalic - Lexmark MS610dn | Forms and Bar Code Card Technical Reference Guide - Page 150
Font name LubalinGraphCE-DemiOblique LubalinGraph-Demi LubalinGraph-DemiOblique ManufIcons Marigold Marigold (W1) MICR Mona Lisa Recut Monaco MonacoCE MonaLisa-Recut New York NewCenturySchlbk-Bold NewCenturySchlbk-BoldItalic NewCenturySchlbkCE-Bold NewCenturySchlbkCE-BoldItalic NewCenturySchlbkCE- - Lexmark MS610dn | Forms and Bar Code Card Technical Reference Guide - Page 151
Font name Palatino Bold Palatino Bold Italic Palatino Italic Palatino Roman Palatino-Bold Palatino-BoldItalic PalatinoCE-Bold PalatinoCE-BoldItalic PalatinoCE-Italic PalatinoCE-Roman Palatino-Italic Palatino-Roman RomanPillar RomanPillar Bold RomanPillar BoldItalic RomanPillar Italic RomanPillar5 - Lexmark MS610dn | Forms and Bar Code Card Technical Reference Guide - Page 152
Font name Times New Roman Bold Times New Roman Bold Italic Times New Roman Italic Times-Bold Times-BoldItalic TimesCE-Bold TimesCE-BoldItalic TimesCE-Italic TimesCE-Roman Times-Italic TimesNewRoman TimesNewRoman-Bold TimesNewRoman-BoldItalic TimesNewRoman-BoldItalicTT TimesNewRoman-BoldTT - Lexmark MS610dn | Forms and Bar Code Card Technical Reference Guide - Page 153
Font name Univers (WE) Bold Italic Univers (WE) Medium Italic Univers (WG) Univers (WG) Bold Univers (WG) Bold Italic Univers (WG) Medium Italic Univers (WL) Univers (WL) Bold Univers (WL) Bold Italic Univers (WL) Medium Italic Univers (WR) Univers (WR) Bold Univers (WR) Bold Italic Univers (WR) - Lexmark MS610dn | Forms and Bar Code Card Technical Reference Guide - Page 154
Font name UniversCE-CondensedBoldOblique UniversCE-CondensedOblique UniversCE-Extended UniversCE-ExtendedObl UniversCE-Light UniversCE-LightOblique UniversCE-Medium UniversCE-Oblique Univers-Condensed Univers-CondensedBold Univers-Condensed-Bold Univers-Condensed-BoldItalic Univers- - Lexmark MS610dn | Forms and Bar Code Card Technical Reference Guide - Page 155
Double-byte Forms Card fonts One DBCS Language is supported: Simplified Chinese. The column on the left indicates common font names. The column on the right indicates the actual font file resident on Forms Card. - Lexmark MS610dn | Forms and Bar Code Card Technical Reference Guide - Page 156
memory to printer. Missing or corrupt file- download formsets again. Missing or corrupt file- download formsets again. Add memory to printer. Add memory to printer. Add memory to printer. Add memory to printer. Download formset again. Add memory to printer. User or internal error Forms print errors - Lexmark MS610dn | Forms and Bar Code Card Technical Reference Guide - Page 157
printer. Add memory to printer. Add memory to printer. Add memory to printer. User or internal error Download formsets. Contact Lexmark Service. Add memory to printer. Add memory to printer. Add memory to printer. Add memory to printer. Missing or corrupt file- download formsets again. Forms print - Lexmark MS610dn | Forms and Bar Code Card Technical Reference Guide - Page 158
Printer out of memory. Print printer. Contact Lexmark Service. Contact Lexmark Service. Missing or corrupt file- download formsets again. Missing or corrupt file- download formsets again. Add memory to printer. Add memory to printer. Add memory to printer. Add memory to printer. Add memory to printer - Lexmark MS610dn | Forms and Bar Code Card Technical Reference Guide - Page 159
file missing required element: %s Error type LFM file Insufficient memory XML error XML error Solution Missing or corrupt file- download formsets again. Add memory to printer. Possible corrupt file- download formsets again. Possible corrupt file- download formsets again. Forms print errors 159 - Lexmark MS610dn | Forms and Bar Code Card Technical Reference Guide - Page 160
Invalid Character PostScript error messages To assist with troubleshooting, the Forms and Bar Code Card generates error messages when an invalid bar code condition occurs. PostScript error reporting must be enabled on the printer for these messages to be printed out. If an error occurs during a bar - Lexmark MS610dn | Forms and Bar Code Card Technical Reference Guide - Page 161
Errors common to all symbologies Error code 1 2 3 4 5 6 7 8 9 10 11 18 19 Error description Unexpected error NULL data Invalid structure No active bar codes Structure out of range Parameter buffer NULL Parameter buffer too - Lexmark MS610dn | Forms and Bar Code Card Technical Reference Guide - Page 162
String errors Invalid String Character Empty Error code 12 13 EAN/JAN 8/113 X EAN/UCC Composite X French Post X German Post X HIBC X ISBN X ISSN X ITF14 X Japan Post X MaxiCode MicroPDF417 MSI Plessey X X OMR X X PDF417 X PLANET X QR Code X RSS14 X Singapore - Lexmark MS610dn | Forms and Bar Code Card Technical Reference Guide - Page 163
Errors specific to symbologies Error code 20 21 22 23 24 25 26 27 28 29 30 31 Symbology UPCE PDF417 range negative module size Invalid Where flag Invalid What flag Invalid Date/Time Invalid Format Product/Catalog number too long Unit measure digit only Invalid lot number Common error messages 163 - Lexmark MS610dn | Forms and Bar Code Card Technical Reference Guide - Page 164
Error description Special link char missing Invalid 2-digit quantity Invalid 5-digit quantity Invalid bar code identifier Invalid encoding string Encoding string too long Invalid checksum 10 Too few columns Too many columns Too few rows Too many rows Common error messages 164 - Lexmark MS610dn | Forms and Bar Code Card Technical Reference Guide - Page 165
Reference considers as an error. The LXK BCC also performs the exact same way as the HP BDP. The BCE does not support lowercase "a-z" character input, and does not translate to uppercase, and is operating per the specifications in the URLs noted above. Therefore, the Forms and Bar Code Card firmware - Lexmark MS610dn | Forms and Bar Code Card Technical Reference Guide - Page 166
is operating per the specs noted above, and does not translate lowercase to uppercase. Therefore, the Forms and Bar Code Card firmware must convert any Codabar that leads to garbled images. The maximum amount of input data is shown in the table below. This table is just a guide, not an absolute - Lexmark MS610dn | Forms and Bar Code Card Technical Reference Guide - Page 167
user should change to a more capable bar code symbology. 4-State postal widths The BCE creates 4-State postal images that address this minor difference may be implemented in a later version. Note: Exact size compatibility of certain 4-State bar code image sizes with previous Lexmark bar code options - Lexmark MS610dn | Forms and Bar Code Card Technical Reference Guide - Page 168
original LXK BCC will encode more than the maximum amount allowed by the AIM specification, but users should never exceed these values. If users were to change to other printing equipment that did not tolerate a marginally higher capacity, then their process will be broken. Also, not all bar code - Lexmark MS610dn | Forms and Bar Code Card Technical Reference Guide - Page 169
specification. Bar code horizontal alignment right side, then there are two options: • Use the PCL "B" and firmware before the require extra checking specification, but users should never exceed these values. If users were to change to other printing equipment that did not tolerate a marginally - Lexmark MS610dn | Forms and Bar Code Card Technical Reference Guide - Page 170
Reference manual version 3.2, and the HP BarDIMM Technical Reference manual from supported should be a single symbol, specified as: 1,1,01234567...... where 1,1, represents the Structured Append; and 01234567.... represents the rest of the MaxiCode data structure. The HP spec BarDIMM specification - Lexmark MS610dn | Forms and Bar Code Card Technical Reference Guide - Page 171
should produce an error on the page. 3 MaxiCode Separator Change (add a second separator character) In the past, for all modes, the input data had structured append is specified alone, then the Forms and Bar Code Card should print a valid MaxiCode symbol that is empty. Depending on the scanner used, - Lexmark MS610dn | Forms and Bar Code Card Technical Reference Guide - Page 172
firmware-imposed limits on certain bar codes. These limits are less than the original LXK BCC, but are needed to prevent corruption of bar code images absence of start/stop characters, if users attempt to encode a Codabar bar code work as on previous Lexmark Bar Code options. The barcodepath operator - Lexmark MS610dn | Forms and Bar Code Card Technical Reference Guide - Page 173
is turned on, then an error page will print and the job will be flushed. The printer will then return to Ready state. • If the Print PS Error setting of the printer is turned off, then the job will be flushed and the printer will return to Ready state. French Postal 3 of 9 dimensions This bar - Lexmark MS610dn | Forms and Bar Code Card Technical Reference Guide - Page 174
www.lexmark.com
www.lexmark.com
October 2012
Forms and Bar Code Card 3.3
Technical Reference Manual