Lexmark MS610dn Quick Reference

Lexmark MS610dn Manual

Get Lexmark MS610dn PDF manuals and user guides View all Lexmark MS610dn manuals
Add to My Manuals
Save this manual to your list of manuals

Lexmark MS610dn manual content summary:

  • Lexmark MS610dn | Quick Reference - Page 1
    paper settings The Universal paper size is a user‑defined setting that lets you print on paper sizes that are not preset in the printer menus. Notes: • The smallest Universal paper size is 6 x 127 mm (3 x 5 inches), and is supported only from the multipurpose feeder. • The largest Universal paper
  • Lexmark MS610dn | Quick Reference - Page 2
    the setting, and then press . Adjusting toner darkness Using the Embedded Web Server 1 Open a Web browser, and then type the IP address of the printer in the address field. Notes: • View the printer IP address in the TCP/IP section in the Network/Ports menu. The IP address appears as four sets of
  • Lexmark MS610dn | Quick Reference - Page 3
    are not supported. • .dcx • .gif • .JPEG or .jpg • .bmp • .pcx • .TIFF or .tif • .png Canceling a print job from the printer control panel From the printer control panel, press > . Linking and unlinking trays 1 Open a Web browser, and then type the printer IP address in the address field
  • Lexmark MS610dn | Quick Reference - Page 4
    Status message bar 7 Status/Supplies 8 Tips To • Show the current printer status such as Ready or Busy. • Show printer conditions such as Imaging unit low or Cartridge Low. • Show intervention messages and the instructions on how to clear them. • Show a printer warning or error message whenever the
  • Lexmark MS610dn | Quick Reference - Page 5
    paper settings The Universal paper size is a user‑defined setting that lets you print on paper sizes that are not preset in the printer menus. Notes: • The smallest Universal paper size is 6 x 127 mm (3 x 5 inches), and is supported only from the multipurpose feeder. • The largest Universal paper
  • Lexmark MS610dn | Quick Reference - Page 6
    applications. Some applications are supported only in select printer models. 6 • There may be additional solutions and applications available for purchase. For more information, contact the place where you purchased the printer. Finding the IP address of the computer For Windows users 1 In the Run
  • Lexmark MS610dn | Quick Reference - Page 7
    access. For help, see the documentation that came with your operating system. 1 Open a Web browser, and then type the printer IP address in the address field. Note: View the printer IP address on the printer home screen. The IP address appears as four sets of numbers separated by periods, such as
  • Lexmark MS610dn | Quick Reference - Page 8
    . Note: To print on a specific paper type, adjust the paper type setting to match the paper loaded, or select the appropriate tray or feeder. 3 Click Print. Canceling a print job from the computer For Windows users 1 Open the printers folder, and then select your printer. 2 From the print queue
  • Lexmark MS610dn | Quick Reference - Page 9
    length. • When loading legal‑size paper, the length guide extends beyond the base leaving the paper exposed to dust. To protect the paper from dust, you can purchase a dust cover separately. For more information, contact customer support. • If you are loading A6-size paper in the standard tray, then
  • Lexmark MS610dn | Quick Reference - Page 10
    . 7 From the printer control panel, set the paper size and paper type in the Paper menu to match the paper loaded in the tray. Note: Set the correct paper size and paper type to avoid paper jams and print quality problems. Loading the multipurpose feeder Use the multipurpose feeder when printing on
  • Lexmark MS610dn | Quick Reference - Page 11
    or specialty media into the multipurpose feeder. • Make sure the paper or specialty media is below the maximum paper fill indicator located on the paper guides. Overfilling may cause paper jams. 3 Prepare the paper or specialty media for loading. • Flex sheets of paper back and forth to loosen
  • Lexmark MS610dn | Quick Reference - Page 12
    with stamps, clasps, snaps, windows, coated linings, or self‑stick adhesives. These envelopes may severely damage the printer. 5 From the printer control panel, set the paper size and paper type in the Paper menu to match the paper or specialty media loaded in the multipurpose feeder. 1 1 • Do not
  • Lexmark MS610dn | Quick Reference - Page 13
    [x]‑page jam, clear Remove all paper from feeder manual the multipurpose feeder. [250.xx] feeder, and then remove the jammed paper. 6 Front door [x]‑page jam, open front door. [20y.xx] Open the front door, then remove the toner cartridge, imaging unit, and jammed paper. [x]‑page jam, open
  • Lexmark MS610dn | Quick Reference - Page 14
    touch the shiny blue photoconductor drum under the imaging unit. Doing so may affect the quality of future print jobs. 6 Firmly grasp the jammed paper on each side, and then gently pull it out. Note: Make sure all paper fragments are removed. 8 Insert the toner cartridge by aligning the side rails
  • Lexmark MS610dn | Quick Reference - Page 15
    , clear standard bin. [20y.xx] 1 Firmly grasp the jammed paper on each side, and then gently pull it out. Note: Make sure all paper fragments are removed. 3 Firmly grasp the jammed paper on each side, and then gently pull it out. 2 From the printer control panel, touch to clear the message and
  • Lexmark MS610dn | Quick Reference - Page 16
    models, select Next > > Clear the jam, press OK > . [x]‑page jam, open tray [x]. [24y.xx] 1 Pull the tray completely out of the printer. Note: The message on the printer display indicates the tray where the jammed paper is located. 2 Firmly grasp the jammed paper on each side, and then gently
  • Lexmark MS610dn | Quick Reference - Page 17
    [x]‑page jam, clear manual feeder. [25y.xx] 1 From the multipurpose feeder, firmly grasp the jammed paper on each side, and then gently pull it out. Note: Make sure all paper fragments are removed. 4 From the printer control panel, touch to clear the message and continue printing. For non‑touch‑
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
Quick Reference
Using the 2.4-inch display printer
model
Learning about the printer
Using the printer control panel
1
2
3
4
5
6
7
8
9
10
11
12
13
Use the
To
1
Display
View the printer status and messages.
Set up and operate the printer.
2
Left arrow
button
Scroll to the left.
3
Select button
Select menu options.
Save settings.
4
Up arrow
button
Scroll up.
5
Right arrow
button
Scroll to the right.
6
Keypad
Enter numbers, letters, or symbols.
Use the
To
7
Sleep button
Enable Sleep mode or Hibernate mode.
The following actions wake the printer from
Sleep mode:
•
Pressing any hard button
•
Opening a tray or the front door
•
Sending a print job from the computer
•
Performing a power
‑
on reset using the
main power switch
•
Attaching a device in the USB port
8
USB port
Connect a flash drive to the printer.
Notes:
•
Only the front USB port supports flash
drives.
•
This feature is available only in select
printer models.
9
Stop or cancel
button
Stop all printer activities.
10
Back button
Return to the previous screen.
11
Down arrow
button
Scroll down.
12
Home button
Go to the home screen.
13
Indicator light
Check the status of the printer.
Understanding the colors of the Sleep button
and indicator lights
The colors of the Sleep button and indicator lights on the printer control
panel signify a certain printer status or condition.
Indicator light
Printer status
Off
The printer is off or in Hibernate mode.
Blinking green
The printer is warming up, processing data,
or printing.
Solid green
The printer is on, but idle.
Blinking red
The printer requires user intervention.
Sleep button light
Printer status
Off
The printer is off, idle or in Ready state.
Solid amber
The printer is in Sleep mode.
Sleep button light
Printer status
Blinking amber
The printer is entering or waking from
Hibernate mode.
Blinking amber for 0.1
second, then goes
completely off for 1.9
seconds in a slow, pulsing
pattern
The printer is in Hibernate mode.
Setting the paper size and type
1
From the printer control panel, navigate to:
>
Settings
>
>
Paper Menu
>
>
Paper
Size/Type
>
2
Press the up or down arrow button to select the tray or feeder, and
then press
.
3
Press the up or down arrow button to select the paper size, and
then press
.
4
Press the up or down arrow button to select the paper type, and
then press
to change the settings.
Configuring Universal paper settings
The Universal paper size is a user
‑
defined setting that lets you print on
paper sizes that are not preset in the printer menus.
Notes:
•
The smallest Universal paper size is 6 x 127 mm (3 x 5 inches),
and is supported only from the multipurpose feeder.
•
The largest Universal paper size is 216 x 355.6 mm (8.5
x 14 inches), and is supported from all paper sources.
1
From the printer control panel, navigate to:
>
Settings
>
>
Paper Menu
>
>
Universal
Setup
>
>
Units of Measure
>
> select a unit of
measure >
1