Lexmark MS622 Quick Reference
Lexmark MS622 Manual
View all Lexmark MS622 manuals
Add to My Manuals
Save this manual to your list of manuals |
Lexmark MS622 manual content summary:
- Lexmark MS622 | Quick Reference - Page 1
separately. Keep all other trays closed until needed. 1 Remove the tray. Note: To avoid paper jams, do not remove trays while the printer is busy. 2 Adjust the paper guides to match the size of the paper that you are loading. Notes: • Load letterhead facedown with the top edge of the sheet toward - Lexmark MS622 | Quick Reference - Page 2
2 Adjust the guide to match the size of the paper that you are loading. 3 print job is confidential, then assign a user name and a four‑digit PIN. 4 Click OK or Print. 5 From the printer home screen, release the print job. • For confidential print jobs, navigate to: Held jobs > select your user name > - Lexmark MS622 | Quick Reference - Page 3
3 Unpack the new toner cartridge, and then shake it three times to redistribute the toner. Replacing the imaging unit 1 Open door A. 2 Remove the used toner cartridge. 4 Insert the new toner cartridge. Note: Use the arrows inside the printer as guides. 2 Remove the toner cartridge. 5 Close door - Lexmark MS622 | Quick Reference - Page 4
exposure to light may cause print quality problems. Warning-Potential Damage: Do not touch the photoconductor drum. Doing so may affect the quality of future print jobs. 6 Insert the toner cartridge. Note: Use the arrows inside the printer as guides. 4 7 Close door A. Clearing jams Avoiding jams - Lexmark MS622 | Quick Reference - Page 5
your printed output for blank pages. • When Jam Recovery is set to On or Auto, the printer reprints jammed pages. Paper jam in door A 1 Remove the tray. • Make sure that the paper guides are positioned correctly and are not pressing tightly against the paper or envelopes. • Push the tray firmly - Lexmark MS622 | Quick Reference - Page 6
minutes. Extended exposure to light may cause print quality problems. Warning-Potential Damage: Do not touch the photoconductor drum. Doing so may affect the quality of future print jobs. 5 Remove the jammed paper. CAUTION-HOT SURFACE: The inside of the printer might be hot. To reduce the risk of - Lexmark MS622 | Quick Reference - Page 7
7 Insert the toner cartridge. Note: Use the arrows inside the printer as guides. 2 Remove the jammed paper. Note: Make sure that all paper fragments are removed. Paper jam in the duplex unit 1 Remove the tray. 8 Close door A. 9 Insert - Lexmark MS622 | Quick Reference - Page 8
edges before loading. 2 Remove the jammed paper. Note: Make sure that all paper fragments are removed. 4 Reload paper, and then adjust the paper guide. 3 Insert the tray. Paper jam in the multipurpose feeder 1 Remove paper from the multipurpose feeder. 2 Remove the jammed paper. Note: Make sure
Quick Reference
Loading paper
Loading trays
CAUTION—TIPPING HAZARD:
To reduce the risk of
equipment instability, load each tray separately. Keep all
other trays closed until needed.
1
Remove the tray.
Note:
To avoid paper jams, do not remove trays while the
printer is busy.
2
Adjust the paper guides to match the size of the paper that you
are loading.
3
Flex, fan, and align the paper edges before loading.
4
Load the paper stack with the printable side facedown, and
then make sure that the side guides fit snugly against the
paper.
Notes:
•
Load letterhead facedown with the top edge of the
sheet toward the front of the tray for one
‑
sided printing.
•
Load letterhead faceup with the bottom edge of the
sheet toward the front of the tray for two
‑
sided printing.
•
Do not slide paper into the tray.
•
To avoid paper jams, make sure that the stack height is
below the maximum paper fill indicator.
5
Insert the tray.
If necessary, set the paper size and paper type from the control
panel to match the paper loaded.
Loading the multipurpose feeder
1
Open the multipurpose feeder.
1