Lexmark MS810de Moving Guide
Lexmark MS810de Manual
 |
View all Lexmark MS810de manuals
Add to My Manuals
Save this manual to your list of manuals |
Lexmark MS810de manual content summary:
- Lexmark MS810de | Moving Guide - Page 1
Moving Guide Before moving the printer CAUTION-POTENTIAL INJURY: Before moving the printer, follow these guidelines to avoid personal injury or printer damage: • Turn off the printer, and then unplug the power cord from the electrical outlet. • Disconnect all cords and cables from the printer. • If - Lexmark MS810de | Moving Guide - Page 2
Moving Guide Page 2 of 3 • Use the handholds located on both sides of the printer to lift it. • Make sure your fingers are not under the printer when you set it down. • Make sure there is adequate clearance around the printer. • Use only the power cord provided with this product or the manufacturer - Lexmark MS810de | Moving Guide - Page 3
used to move the hardware options must have a surface able to support the dimensions of the hardware options. • Keep the printer in an upright position. • Avoid severe jarring movements. Shipping the printer When shipping the printer, use the original packaging or call the place of purchase for
-
1 -
2 -
3
 |
 |
Moving Guide
Before moving the printer
CAUTION—POTENTIAL INJURY:
Before moving the printer, follow these guidelines to avoid personal injury or printer
damage:
•
Turn off the printer, and then unplug the power cord from the electrical outlet.
•
Disconnect all cords and cables from the printer.
•
If two or more optional finishers are installed, then remove the finishers individually from the printer.
Notes:
–
Make sure to remove the topmost finisher first.
–
To remove the finisher, hold the finisher on both sides, and then lift the latches to unlock the finisher.
•
If the printer does not have a caster base, then remove the optional trays.
Note:
Slide the latch on the right side of the printer toward the front of the printer until it
clicks
into place.
Moving Guide
Page 1 of 3