Lexmark MS810de Supplies Guide

Supplies Guide

When

Cartridge low

appears, you may need to order a new toner cartridge. You may be able to print a limited number of

pages when the message first appears, but it is best to have the new cartridge available when the current one runs out.

Ordering an imaging unit

Extremely low print coverage for extended periods of time may cause imaging unit parts to fail prior to exhaustion of toner.

For more information on replacing the imaging unit, see the instruction sheet that came with the supply.

Part name

Lexmark Return Program

Regular

Imaging unit

520Z

520ZA

Ordering a maintenance kit

To identify the supported fuser type, view the label on the fuser. Do either of the following:

•

Remove the toner cartridge and imaging unit. The two-digit fuser type code (such as 00 or 01) can be seen on the front of

the fuser.

Warning—Potential Damage:

Do not expose the imaging unit to direct light for more than 10 minutes. Extended

exposure to light may cause print quality problems.

•

Pull down the printer rear door. The two-digit fuser type code (such as 00 or 01) can be seen on the rear of the fuser.

Notes:

•

Using certain types of paper may require more frequent replacement of the maintenance kit.

•

The separator roller, fuser, pick rollers, and transfer roller are all included in the maintenance kit and can be individually

ordered and replaced if necessary.

•

For more information on replacing the maintenance kit, see the instruction sheet that came with the supply.

Lexmark Return Program fuser maintenance kits and part numbers for MS810, MS811, and MS812

Fuser maintenance kit type

Part number

Type 00

40X8420

Type 01

40X8421

Type 02

40X8422

Type 03

40X8423

Type 04

40X8424

Lexmark regular fuser maintenance kits and part numbers for MS810, MS811, and MS812

Fuser maintenance kit type

Part number

Type 05

40X8425

Type 06

40X8426

Type 07

40X8427

Type 08

40X8428

Supplies Guide

Page 1 of 3