Lexmark MS823 Card for IPDS: IPDS Printer and Host Setup Guide 9th ed.
Lexmark MS823 Manual
View all Lexmark MS823 manuals
Add to My Manuals
Save this manual to your list of manuals |
Lexmark MS823 manual content summary:
- Lexmark MS823 | Card for IPDS: IPDS Printer and Host Setup Guide 9th ed. - Page 1
Card for IPDS and IPDS Printer and Host Setup Guide 9th Edition Version 1.0 December 2018 www.lexmark.com - Lexmark MS823 | Card for IPDS: IPDS Printer and Host Setup Guide 9th ed. - Page 2
any country where such provisions are inconsistent with local law: LEXMARK INTERNATIONAL, INC. AND KODAK PROVIDE THIS PUBLICATION "AS IS" OS/400, Print Services Facility, PSF, System/390, zSeries, and z/OS are trademarks of International Business Machines Corporation in the United States, other - Lexmark MS823 | Card for IPDS: IPDS Printer and Host Setup Guide 9th ed. - Page 3
2 Contents Notices ...2 Equipment Requirements and Specifications 3 Customer Support ...4 iSeries and AS400 LAN Printing Using the Printer Standard Network Port or MarkNet Internal Print Using an Internal LAN PrinterServer 20 Printer and Host Timeout Values ...27 Printer Messages and Problems...28 - Lexmark MS823 | Card for IPDS: IPDS Printer and Host Setup Guide 9th ed. - Page 4
Lexmark MS521, MS621, MS622e, MX321, MX421, MX521, MX622 • Lexmark MS82x, MS82xe, MX72x, MX82x • Lexmark CS72x, CX72x • Lexmark CS82x, CX820, CX825, CX860 • Lexmark CS92x, CX92x Unless otherwise specified, in the rest of this guide support for these printer models. *A minimum amount of user memory (DRAM) - Lexmark MS823 | Card for IPDS: IPDS Printer and Host Setup Guide 9th ed. - Page 5
4 Customer Support If you cannot find answers in this guide about using the IPDS emulation, or require firmware updates, please contact your point of purchase, your local Lexmark office, or check the Lexmark support web site at http://support.lexmark.com/index?page=localeSelect&locale=en&jumppage= - Lexmark MS823 | Card for IPDS: IPDS Printer and Host Setup Guide 9th ed. - Page 6
MarkNet internal LAN print server. Refer to the IPDS User's Guide for detailed instructions on using the control panel to select and change option settings. Host Resolution, and Fax Interrupt Settings 6. Verify IPDS Printing 7. Troubleshooting Step 1: Choose a Printer Port for Use in the Device - Lexmark MS823 | Card for IPDS: IPDS Printer and Host Setup Guide 9th ed. - Page 7
6 your system. Examples are shown with V6R1 parameters. Define a PSF configuration object for your printer using CRTPSFCFG. The PSFCFG object defined in this step is referenced in the printer device description (CRTDEVPRT). More than one printer can use this object. Below is an example of a PSF - Lexmark MS823 | Card for IPDS: IPDS Printer and Host Setup Guide 9th ed. - Page 8
may be set to *YES. This may increase job performance. Selecting *YES may change the fonts downloaded from the host and change paper jam recovery action between the host and printer. Note 2: SEC15 is printer. Refer to the IPDS Emulation User's Guide for additional information on capturing fonts. - Lexmark MS823 | Card for IPDS: IPDS Printer and Host Setup Guide 9th ed. - Page 9
MSGQ Your Queue Library Your LIB (Note: Port number selected in step 1 above.) Activation timer ACTTMR > *NOMAX Image configuration IMGCFG *NONE Maximum pending requests MAXPNDRQS 6 Print while converting PRTCVT *YES Form definition FORMDF F1C10110 Library *LIBL - Lexmark MS823 | Card for IPDS: IPDS Printer and Host Setup Guide 9th ed. - Page 10
program USRDTATFM *NONE Library User defined driver program........... USRDRVPGM *NONE Library Secure connection SECURECNN *NO Validation list VLDL *NONE Library Publishing information PUBLISHINF Support duplex *UNKNOWN Support color *UNKNOWN Pages per minute black - Lexmark MS823 | Card for IPDS: IPDS Printer and Host Setup Guide 9th ed. - Page 11
a. Set Bar Code Size to "4028" under BARCODE > Bar Code Size. b. The recommended Host Resolution setting is "Auto". If you experience printing problems, set Host Resolution to "300". 3. If you are replacing a printer that used a 43xx Emulation setting, choose the "Resident" Emulation and change the - Lexmark MS823 | Card for IPDS: IPDS Printer and Host Setup Guide 9th ed. - Page 12
printing automatically. Note 2: The supported printers and MFPs do not contain an Advanced Function Common Control Unit (AFCCU). Step 6: Verify refer to the IPDS Emulation User's Guide to determine if other IPDS MENU settings need to be changed. Step 7: Troubleshooting If the IPDS job does not print - Lexmark MS823 | Card for IPDS: IPDS Printer and Host Setup Guide 9th ed. - Page 13
the control panel, proceed to Settings > IPDS Settings > Emulation > BARCODE > Bar Code Size. 7. Refer to Chapter 5. Printer Messages and Problems for additional problem solutions. 8. Once the job prints, refer to the IPDS Emulation User's Guide for information on changing other IPDS MENU settings. - Lexmark MS823 | Card for IPDS: IPDS Printer and Host Setup Guide 9th ed. - Page 14
or higher installed and configured on MVS. • MVS Maintenance Level Required in TCP/IP Profile • IBM PTF UQ03848 • IBM PTF UQ11550 For an installation description please refer to the following publications: Print Services Facility/MVS: Update Guide G544-3984 Version 2, Release 2, Modification 0 Print - Lexmark MS823 | Card for IPDS: IPDS Printer and Host Setup Guide 9th ed. - Page 15
Messages and Codes G550-0432 PSF V4R2 for z/OS: User's Guide S550-0435 Note: Ideally, you should always consult the latest Size, Host Resolution, and Fax Interrupt Settings 6. Verify IPDS Printing 7. Troubleshooting Step 1: Choose a Printer Port for Printing IPDS Jobs Several printer ports - Lexmark MS823 | Card for IPDS: IPDS Printer and Host Setup Guide 9th ed. - Page 16
15 Step 3: Add the printer to the PSF STARTUP PROC Add printer to PSFSTARTUP PROC. Parameters to change are shown in bold. // PRT7 CNTL // PRT7 PRINTDEV FONTDD=*.FONT01, // OVLYDD=*.OLAY01, // PSEGDD=*.PSEG02, // PDEFDD=*.PDEF01, // FDEFDD=*.FDEF01, // JOBHDR=*.JOBHDR // JOBTRLR=*.JOBTLR // DSHDR - Lexmark MS823 | Card for IPDS: IPDS Printer and Host Setup Guide 9th ed. - Page 17
// OLAY01 DD DSN=INST.OVERLIB,DISP=SHR // * // PDEF01 DD DSN=SYS1.PDEFLIB,DISP=SHR // DD DSN=INST.PDEFLIB,DISP=SHR // * // FDEF01 DD DSN=INST.FDEFLIB,DISP=SHR // DD DSN=INST.FDEFLIB,DISP=SHR // * // PRT7 CNTL // PRT7 PRINTDEV FONTDD=*.FONT01, // OVLYDD=*.OLAY01, // PSEGDD=*.PSEG02, // PDEFDD=*. - Lexmark MS823 | Card for IPDS: IPDS Printer and Host Setup Guide 9th ed. - Page 18
. b. The recommended Host Resolution setting is "Auto". If you experience printing problems, set Host Resolution to "300". 3. If you are replacing a printer that does not support DBCS printing. On MFPs, you can set the print priority of received faxes. Refer to the IPDS Emulation User's Guide for - Lexmark MS823 | Card for IPDS: IPDS Printer and Host Setup Guide 9th ed. - Page 19
printing automatically. Note 2: The supported printers and MFPs do not contain an Advanced Function Common Control Unit (AFCCU). Step 6: Verify refer to the IPDS Emulation User's Guide to determine if other IPDS MENU settings need to be changed. Step 7: Troubleshooting If the IPDS job does not print - Lexmark MS823 | Card for IPDS: IPDS Printer and Host Setup Guide 9th ed. - Page 20
screen of the control panel, proceed to Settings > IPDS Settings > Emulation > Bar Code Size. 8. Refer to Chapter 5. Printer Messages and Problems for additional problem solutions. 9. Once the job prints, refer to the IPDS Emulation User's Guide for information on changing other IPDS MENU settings. - Lexmark MS823 | Card for IPDS: IPDS Printer and Host Setup Guide 9th ed. - Page 21
MarkNet internal LAN print server. Refer to the IPDS User's Guide for detailed instructions on using the control panel to select and change option settings. Resolution, and Fax Interrupt Settings 6. Verify IPDS Printing 7. Troubleshooting Step 1: Choose a Printer Port for Printing IPDS Jobs Several - Lexmark MS823 | Card for IPDS: IPDS Printer and Host Setup Guide 9th ed. - Page 22
21 a. Start PSF/2 control panel by selecting the PSF/2 Folder and then selecting the PSF/2 Control Panel icon. b. On the PSF/2 Control Panel select Profile and then New. The PSF/2 New Device menu appears. Enter the device name and the device description and select a Device Resolution of 300 pel. c. - Lexmark MS823 | Card for IPDS: IPDS Printer and Host Setup Guide 9th ed. - Page 23
22 The Setup queues menu will appear. It will be blank at first. Enter the Queue name, description and select the Device and then select Setup. An OS/2 printer queue is now created and the printer is ready to print IPDS from OS/2 and a PSF/2 connected host. Note: You can check the connection using - Lexmark MS823 | Card for IPDS: IPDS Printer and Host Setup Guide 9th ed. - Page 24
23 Use the following steps to set the Job Interval Shutdown Timer option: a. Start the PSF/2 control panel by selecting the PSF/2 folder and then the PSF/2 Control Panel icon. b. On the PSF/2 Control Panel select Profile and then Change. c. Now select Tuning Options. The Job Interval Shutdown Timer - Lexmark MS823 | Card for IPDS: IPDS Printer and Host Setup Guide 9th ed. - Page 25
24 be verified. You can verify these settings from the printer control panel as shown below. 1. From Home screen go to Settings > Network/Ports > TCP/IP. 2. Swipe up on touchscreen to scroll through the options or use the navigation buttons or icons to scroll through the options on non- - Lexmark MS823 | Card for IPDS: IPDS Printer and Host Setup Guide 9th ed. - Page 26
Resolution setting is "Auto". If you experience printing problems, set Host Resolution to "300". 3. If The supported printers and MFPs do not contain an Advanced Function Common Control Unit User's Guide to determine if other IPDS MENU settings need to be changed. Step 7 Troubleshooting If the - Lexmark MS823 | Card for IPDS: IPDS Printer and Host Setup Guide 9th ed. - Page 27
the control panel, proceed to Settings > IPDS Settings > Emulation > BARCODE > Bar Code Size. 7. Refer to Chapter 5. Printer Messages and Problems for additional problem solutions. 8. Once the job prints, refer to the IPDS Emulation User's Guide for information on changing other IPDS MENU settings. - Lexmark MS823 | Card for IPDS: IPDS Printer and Host Setup Guide 9th ed. - Page 28
values of the printer IPDS Timeout value and host release timers is very important when printing IPDS jobs. Selection of some values will cause communication problems between the printer and the host. Use the tables below to verify the timeout settings in the printer and on the host. AS/400 or - Lexmark MS823 | Card for IPDS: IPDS Printer and Host Setup Guide 9th ed. - Page 29
for information on a printer message or for keywords for a problem. Printer remains in Ready and message on Host 1510 Incorrect DLE Remote output queue (name clash) Standard Network port not working Timeout (IPDS Timeout; Busy Timeout etc.) Problem Number 1 2 10 9 15 8 3 13 12 3 13 12 7 4 14 13 5 - Lexmark MS823 | Card for IPDS: IPDS Printer and Host Setup Guide 9th ed. - Page 30
with device is being retried 2. Session with device ended abnormally 3. Writer did not end normally Solution to Problem 1 Check the port defined on the host for printing IPDS to the printer. Port 9100 is not supported for IPDS printing. Change the port selection on the host to 5001. If this does not - Lexmark MS823 | Card for IPDS: IPDS Printer and Host Setup Guide 9th ed. - Page 31
: Disconnect Interval (DISCINTV PSF/2 TCP/IP Settings: Connect Timeout Turning Option: Job Interval Shutdown Timer PSF/AIX SMIT Printer Def: Connect Timeout *NOMAX *NOMAX 0 0 9999 0 Problem 4: IPDS memory exception Sometimes an IPDS memory exception is reported to the host. - Lexmark MS823 | Card for IPDS: IPDS Printer and Host Setup Guide 9th ed. - Page 32
supported printer, refer to the appendix on memory requirements and recommendations in the IPDS Emulation User's Guide. D. The host may be downloading more on each supported printer, refer to the appendix on memory requirements and recommendations in the IPDS Emulation User's Guide. Problem 5: Large - Lexmark MS823 | Card for IPDS: IPDS Printer and Host Setup Guide 9th ed. - Page 33
the printer code. Download the correct IPDS emulation version. See the section on support (page 7) for firmware update information. Problem 10: 34 Incorrect Media 34 Incorrect Media appears on the display Solution to Problem 10 A. Load the correct paper size and/or check tray paper guides to be sure - Lexmark MS823 | Card for IPDS: IPDS Printer and Host Setup Guide 9th ed. - Page 34
does not print anything and the job remains on the print queue. Solution to Problem 14 Port 9100, 9600 or some other unsupported port number is specified as the IPDS communications port on the host. The printer supports port 5001 for IPDS printing. Change the port number on the host to 5001 - Lexmark MS823 | Card for IPDS: IPDS Printer and Host Setup Guide 9th ed. - Page 35
34 Solution to Problem 15 A minimum of 256 MB of user memory (DRAM) is required to activate IPDS printing. The message indicates there is less than 256 MB or more of installed memory. IPDS should function normally with the extra memory. For all other 900.40 Firmware errors, contact technical support.
Card for IPDS and
IPDS Printer and Host Setup Guide
9
th
Edition Version 1.0
December 2018
www.lexmark.com