Lexmark MX810 Email Guide
Lexmark MX810 Manual
View all Lexmark MX810 manuals
Add to My Manuals
Save this manual to your list of manuals |
Lexmark MX810 manual content summary:
- Lexmark MX810 | Email Guide - Page 1
light comes on when the paper is loaded properly. 2 If you are loading a document into the ADF tray, then adjust the paper guides. Note: To avoid a cropped image, make sure that the size of the original document and the copy paper size are the same. 3 From the home screen, navigate to: E-mail - Lexmark MX810 | Email Guide - Page 2
the paper is loaded properly. 2 If you are loading a document into the ADF tray, then adjust the paper guides. 3 From the home screen, navigate to: E-mail > Recipient(s) > quality of your e-mail. Increasing the image resolution increases the e-mail file size and the time needed to scan - Lexmark MX810 | Email Guide - Page 3
Guide Page 3 of 4 Send As This option lets you set the output type for the scan image of your original document. • XPS-Use this to create a single XPS file with multiple pages. Content paused and a preview image appears. Note: This option appears only when a working printer hard disk is installed - Lexmark MX810 | Email Guide - Page 4
Guide Page 4 of 4 Using the advanced options Select from the following settings: • Advanced Imaging-This adjusts the Background Removal, Color Balance, Color Dropout, Contrast, JPEG Quality, Mirror Image, Negative Image Sensor-This detects when the ADF picks more than one sheet of paper at a time
E-mail Guide
You can send an e-mail from the printer by typing the e-mail address, using a shortcut number, or using the address book.
Sending an e-mail using the printer control panel
1
Load an original document faceup, short edge first into the ADF tray or facedown on the scanner glass.
Notes:
•
Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as magazine clippings)
into the ADF tray. Place these items on the scanner glass.
•
The ADF indicator light comes on when the paper is loaded properly.
2
If you are loading a document into the ADF tray, then adjust the paper guides.
Note:
To avoid a cropped image, make sure that the size of the original document and the copy paper size are the same.
3
From the home screen, navigate to:
E-mail
>
Recipient(s)
4
Type the e
‑
mail address, or press
#
using the keypad, and then enter the shortcut number.
Notes:
•
To enter additional recipients, touch
Next address
, and then enter the address or shortcut number you want to add.
•
You can also enter an e
‑
mail address using the address book.
5
Touch
Done
>
Send It
.
Sending an e
‑
mail using a shortcut number
1
Load an original document faceup, short edge first into the ADF tray or facedown on the scanner glass.
Notes:
•
Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as magazine clippings)
into the ADF tray. Place these items on the scanner glass.
•
The ADF indicator light comes on when the paper is loaded properly.
2
If you are loading a document into the ADF tray, then adjust the paper guides.
3
Press
#
, then enter the shortcut number using the keypad, and then touch
.
Note:
To enter additional recipients, touch
Next address
, and then enter the address or shortcut number that you want
to add.
4
Touch
Send It
.
Sending an e
‑
mail using the address book
1
Load an original document faceup, short edge first into the ADF tray or facedown on the scanner glass.
Notes:
•
Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as magazine clippings)
into the ADF tray. Place these items on the scanner glass.
E-mail Guide
Page 1 of 4