Lexmark MX822 Card for IPDS: IPDS Emulation Users Guide 5th ed.
Lexmark MX822 Manual
View all Lexmark MX822 manuals
Add to My Manuals
Save this manual to your list of manuals |
Lexmark MX822 manual content summary:
- Lexmark MX822 | Card for IPDS: IPDS Emulation Users Guide 5th ed. - Page 1
's Guide Printers • Lexmark CS82x • Lexmark CS72x • Lexmark CS92x • Lexmark MS52x • Lexmark MS62x • Lexmark MS82x Multifunction Products • Lexmark CX82x • Lexmark CX860 • Lexmark CX72x • Lexmark CX92x • Lexmark MX32x • Lexmark MX42x • Lexmark MX52x • Lexmark MX62x • Lexmark MX72x • Lexmark MX82x - Lexmark MX822 | Card for IPDS: IPDS Emulation Users Guide 5th ed. - Page 2
to any country where such provisions are inconsistent with local law: LEXMARK INTERNATIONAL, INC. AND KODAK PROVIDE THIS PUBLICATION "AS IS" WITHOUT at any time. References in this publication to products, programs, or services do not imply that the manufacturer intends to make these available in all - Lexmark MX822 | Card for IPDS: IPDS Emulation Users Guide 5th ed. - Page 3
Guide ...7 1.2 Equipment Requirements and Specifications for IPDS Emulation Printing 7 1.3 Customer Support ...8 1.4 Conventions Used in the Manual Emulation ...16 3.3.2 Host Resolution ...16 3.3.3 Color Processing...17 3.3.4 Toner Saver ...17 3.3.5 BAR CODE ...17 3.3.6 Default Codepage ...18 - Lexmark MX822 | Card for IPDS: IPDS Emulation Users Guide 5th ed. - Page 4
45 3.8.9 MANUAL ENV ADJ ...45 3.9 RESOURCE CAPTURE Menu Options 46 3.9.1 Capture Media ...46 3.9.2 Capture Fonts ...46 3.9.3 Capture Data Objects ...47 3.9.4 Capture CMR Objects ...47 3.9.5 Remove Resources...47 4 Duplex Printing Using Preprinted Media 48 5 Finishing Support...49 5.1 Offset - Lexmark MX822 | Card for IPDS: IPDS Emulation Users Guide 5th ed. - Page 5
77 9.3 Functions that Cannot be Operated Remotely 77 10 Printer Messages and Problems 79 11 Command Reference...80 11.1 XOA Print Quality Control 80 11 Scale Printing 84 11.6 TrueType/OpenType Fonts 84 11.7 Object Container Support ...84 11.8 Media Reporting by Object ID (OID 85 12 Warranty - Lexmark MX822 | Card for IPDS: IPDS Emulation Users Guide 5th ed. - Page 6
3812/3816 Compatibility Font Set 93 B.4 IBM Core Interchange Scalable Font Set 94 B.5 IBM Core Interchange Font Set Code Page Support 95 B.5.1 Latin 1 Country Extended Code Pages 95 B.5.2 Latin 1 EBCDIC Publishing Code Pages 96 B.5.3 Latin 1 ASCII Code Pages ...96 B.5.4 Latin 2, 3, 4, 5, and - Lexmark MX822 | Card for IPDS: IPDS Emulation Users Guide 5th ed. - Page 7
firmware cards. If you need basic information about your printer setup and printer operation, please refer to the printer's user's guide and specific documentation. 1.2 Equipment Requirements and Specifications for IPDS Emulation Printing This manual applies to the following printers: • Lexmark - Lexmark MX822 | Card for IPDS: IPDS Emulation Users Guide 5th ed. - Page 8
in the Lexmark Card for IPDS Printer and Host Setup Guide. If you require firmware updates or cannot find answers in this guide about using the IPDS emulation, please contact your point of purchase, your local Lexmark office, or check the Lexmark support web site at http://support.lexmark.com. 8 - Lexmark MX822 | Card for IPDS: IPDS Emulation Users Guide 5th ed. - Page 9
1.4 Conventions Used in the Manual • Printer menu keys and operator panel texts are written in bold. • Option names usually correspond to menu texts and are bold when used in sentences - Lexmark MX822 | Card for IPDS: IPDS Emulation Users Guide 5th ed. - Page 10
. These publications may be found at: http://support.lexmark.com 2.1 IPDS MENU Setup Options vs. Printer They are only used in the absence of specific instructions from the host. Thus, the settings you choose from restore the factory defaults. This guide discusses changing the IPDS Settings. - Lexmark MX822 | Card for IPDS: IPDS Emulation Users Guide 5th ed. - Page 11
4. Scroll through the menus displayed on the screen until you see IPDS Settings. 5. Select IPDS Settings to display settings that are specific to IPDS. 2.4 Printing the Menu Settings Page 1. Make sure the printer is powered ON and the Ready message is displayed. 2. On the Home screen, select the - Lexmark MX822 | Card for IPDS: IPDS Emulation Users Guide 5th ed. - Page 12
Resolution Color Processing Toner Saver BAR CODE Bar Images Text Graphics CMOCA Options IPDS CMOCA Instruction CC Color Files Upload User CMYK Profile Adjust Tray 5 Adjust MP FEEDER ADJUST MANUAL PAPER ADJ MANUAL ENV. ADJ Capture Media Capture Fonts Capture supported by the product are displayed. 12 - Lexmark MX822 | Card for IPDS: IPDS Emulation Users Guide 5th ed. - Page 13
Emulation Option Name IPDS Emulation Host Resolution Color Processing Toner Saver Bar Code Symbol Bar Code Size Default Codepage Images: Perception Text: Relative Colorim Graphics: Saturation IPDS CMOCA: Enable Instruction CC: Use User CMYK Profile User RGB Profile User Dest. Profile User OCA Mapping - Lexmark MX822 | Card for IPDS: IPDS Emulation Users Guide 5th ed. - Page 14
Default Value (When a tray is not installed the value is "No Map") Tray 1 0 Tray 2 1 Tray 3 2 Tray 4 3 Tray 5 4 Envelopes (Feeder) 64 Envelopes (Manual) 64 Manual Paper 99 MP Feeder 98 No Map 3.2.5 Map Output Bins Option name MAP OUTPUT BINS Menu Options Bin Mapping 1 Bin Mapping - Lexmark MX822 | Card for IPDS: IPDS Emulation Users Guide 5th ed. - Page 15
Option name Capture Data Objects Capture CMR Objects Remove Resources Default Value Disable Disable Fonts Objects CMRs Remove All 15 - Lexmark MX822 | Card for IPDS: IPDS Emulation Users Guide 5th ed. - Page 16
before receiving IPDS data. The IPDS Printer and Host Setup Guide includes guidelines for selecting the emulation. Resident* 3812/3816 This "300" or "600" setting. Auto* 240 300 600 Reply to host indicates support for IM1 image and any dpi raster fonts. Captured raster fonts of any resolution are - Lexmark MX822 | Card for IPDS: IPDS Emulation Users Guide 5th ed. - Page 17
print all images and graphics objects in full color. Print text and barcodes as black. Note: Color options are only applicable on color models. 3.3.4 Toner Saver Specifies the action taken when the IPDS Print Quality Control command is received. Printer Setting* Use the values in the printer menu - Lexmark MX822 | Card for IPDS: IPDS Emulation Users Guide 5th ed. - Page 18
defines the default code page with the appropriate character set to be used. The list is a limited selection of all supported code pages associated with the three types of supported fonts, which are known as "Compatibility", "Core Interchange", and "Coordinated". For details see Appendix about 18 - Lexmark MX822 | Card for IPDS: IPDS Emulation Users Guide 5th ed. - Page 19
Coordinated Font Set. All of the other code pages in the above list are in the Core Interchange Font Set. Note 2: The Euro symbol is supported in code pages 1140-1159, 1153-1158 and in code pages whose text description includes the designation Eur, such as Arabic Eur 420. 3.3.7 Codepage Version - Lexmark MX822 | Card for IPDS: IPDS Emulation Users Guide 5th ed. - Page 20
20 - Lexmark MX822 | Card for IPDS: IPDS Emulation Users Guide 5th ed. - Page 21
in paper jams due to toner contamination of the paper path and toner appearing on the back side of duplex sheets. Toner contamination of the paper be clipped to the printable area supported by the printer when edge to edge printing is not supported. Note: The Lexmark MS82x, MS52x, MS62x, CS92x, - Lexmark MX822 | Card for IPDS: IPDS Emulation Users Guide 5th ed. - Page 22
Edge to Edge setting. Please refer to printer documentation for the instructions to enable setting. 3.3.11 Exception Control It is often practical If a font/code page combination is selected, which is not fully supported, characters may be missing. Strict A "Strict" setting reports exceptions when - Lexmark MX822 | Card for IPDS: IPDS Emulation Users Guide 5th ed. - Page 23
3.3.13 Font Style This option defines the visual appearance of characters in certain standard resident fixed pitch fonts such as Courier, Prestige, or Letter Gothic Font. When set to Standard, the styles will more closely match previous generations of printers with the Card for IPDS. When set to - Lexmark MX822 | Card for IPDS: IPDS Emulation Users Guide 5th ed. - Page 24
print job. Note: The host port is specified when configuring the printer parameters on the host. Refer to the IPDS Printer and Host Setup Guide for more information on specifying the port and host timeout values. Host Controlled* 15 seconds 30 seconds 60 seconds 90 seconds 2 minutes 3 minutes - Lexmark MX822 | Card for IPDS: IPDS Emulation Users Guide 5th ed. - Page 25
IPDS resources from the last active session are temporarily stored in the printer memory when printer IPDS Timeout values ("15 seconds" to "10 Minutes") are selected and the host timer/timeout values are set to a large value or disabled. Operator actions and processing of other jobs may cause the - Lexmark MX822 | Card for IPDS: IPDS Emulation Users Guide 5th ed. - Page 26
should be disabled after use. Print performance may be degraded when enabled. This option is usually only operated by service personnel for troubleshooting purpose. Disable* Disable stream capture Enable Enable stream capture. Note 1: This function is accessed via EWS. Note 2: The captured - Lexmark MX822 | Card for IPDS: IPDS Emulation Users Guide 5th ed. - Page 27
3.4 COLOR MENU - Options Descriptions In the following settings an asterisk "*" indicates the default factory value. The selected value for each of these options can be printed; see Printing the Menu Settings Page on page 11. Note: Color options are only applicable on color models. 3.4.1 Color - Lexmark MX822 | Card for IPDS: IPDS Emulation Users Guide 5th ed. - Page 28
3.4.4 User Dest. Profile This option controls whether a user uploaded destination profile should be used. The device output color space is defined as CMYK or Grey. Use* Ignore If no destination profile is found applicable in the IPDS data the User Destination Profile will be used. If no User - Lexmark MX822 | Card for IPDS: IPDS Emulation Users Guide 5th ed. - Page 29
Ignore Do not use the embedded profile in the IPDS objects. 3.4.9 HL Mapping Table This option controls IPDS highlight color processing priority. IPDS CMT, User HL, IPDS HL * IPDS CMT, IPDS HL User HL, IPDS HL IPDS HL The IPDS Color Mapping Table (CMT) is searched first (if one exists). For HL - Lexmark MX822 | Card for IPDS: IPDS Emulation Users Guide 5th ed. - Page 30
and process all CMOCA resources. Disable Do not accept CMOCA resources. CMOCA support is not returned to the host. Ignore Support for CMOCA is returned to the host. CMOCA resources are accepted but ignored. 3.4.12.3 Instruction CC CC CMRs contains ICC profiles (in their ICC defined syntax) that - Lexmark MX822 | Card for IPDS: IPDS Emulation Users Guide 5th ed. - Page 31
specific printer model as the default output profile. Ignore the IPDS CMOCA instruction CC CMR. The IPDS will use the default User Destination Profile. If user files. Note: CMOCA feature is available on the following printers: Lexmark CS82x, CS72x, CS92x, CX82x CX86x, CX72x and CX92x. 3.4.13 Remove - Lexmark MX822 | Card for IPDS: IPDS Emulation Users Guide 5th ed. - Page 32
be routed to a bin that supports offset stacking and have offset stacking Lexmark CS72x Lexmark CS82x Lexmark CX72x Lexmark CX82x Lexmark CX86x Lexmark MS82x Lexmark MX72x Lexmark MX82x Lexmark MS52x Lexmark MS62x Lexmark MX32x Lexmark MX42x Lexmark MX52x Lexmark MX62x Lexmark CS92x Lexmark - Lexmark MX822 | Card for IPDS: IPDS Emulation Users Guide 5th ed. - Page 33
example: Universal feed directions: Lexmark CS72x Lexmark CS82x Lexmark CS92x Lexmark CX72x Lexmark CX82x Lexmark CX86x Lexmark CX92x Lexmark MS52x Lexmark MS62x Lexmark MS82x Lexmark MX32x Lexmark MX42x Lexmark MX52x Lexmark MX62x Lexmark MX72x Lexmark MX82x Feed Direction Leading edge - Lexmark MX822 | Card for IPDS: IPDS Emulation Users Guide 5th ed. - Page 34
Product Lexmark CS72x Lexmark CS82x Lexmark CX72x Lexmark CX82x Lexmark CX86x Lexmark MS82x Lexmark MX72x Lexmark MX82x Lexmark MS52x Lexmark MS62x Lexmark MX32x Lexmark MX42x Lexmark MX52x Lexmark MX62x Lexmark CS92x Lexmark CX92x Menu Option Value Range OTHER ENV SIZE 4200* > Envelope Length - Lexmark MX822 | Card for IPDS: IPDS Emulation Users Guide 5th ed. - Page 35
Envelope feed directions: Lexmark CS720 Lexmark CS820 Lexmark CS725 Lexmark CX725 Lexmark CX820 Lexmark CX825 Lexmark CX860 Lexmark MS52x Lexmark MS62x Lexmark MX32x Lexmark MX42x Lexmark MX52x Lexmark MX62x Lexmark CS92x Lexmark CX92x Lexmark MS82x Lexmark MX72x Lexmark MX82x Feed Direction - Lexmark MX822 | Card for IPDS: IPDS Emulation Users Guide 5th ed. - Page 36
input source is mapped to an IPDS host number. Input sources include the multi-purpose feeder, envelope feeder, manual paper feed, and manual envelope feed. Some models may not support all printer input sources listed below. The optional sources will only be displayed when installed on the printer - Lexmark MX822 | Card for IPDS: IPDS Emulation Users Guide 5th ed. - Page 37
Important: For MAP INPUT TRAYS to work correctly, the Paper Size/Type for each printer input tray must be set differently in the printer's Paper Menu. See example 1 below. The only time you set the PAPER TYPE the same for more than one input tray is when you want to link the input trays involved. - Lexmark MX822 | Card for IPDS: IPDS Emulation Users Guide 5th ed. - Page 38
shown below, the printer will select media from the Env Feeder. Tray Mapping 6 = IPDS 64 mapped to Env Feeder Tray Mapping 7 = IPDS 64 mapped to Manual Env In other words, the printer attempts to map to (select media from) the Env Feeder first, and if it is not installed, the printer - Lexmark MX822 | Card for IPDS: IPDS Emulation Users Guide 5th ed. - Page 39
. Printer output bins include the top of the printer (standard bin) and optional output bins that attach to the printer. Some printer models may not support all the bins listed. The optional printer output bin value will only be displayed when the physical output bin is installed on the printer. Fin - Lexmark MX822 | Card for IPDS: IPDS Emulation Users Guide 5th ed. - Page 40
below, the labels Bin Mapping 1Bin Mapping 12 refer to the number of the mapping, not the printer physical output bin. All printers do not support ten optional output bins or an optional finisher. Default settings will be assigned for all output bins available on your printer. Bin Mapping No. Bin - Lexmark MX822 | Card for IPDS: IPDS Emulation Users Guide 5th ed. - Page 41
3.8 MARGINS Menu Options Use margin settings to adjust the position of the page image. Margin settings, which could be compared to movements of the tractor feeder and paper knob of a matrix printer, affect all IPDS jobs and are not affected by IPDS commands in the job. The input tray and input - Lexmark MX822 | Card for IPDS: IPDS Emulation Users Guide 5th ed. - Page 42
Example 1 - Margins The All Input Trays Left Margin is set to the default of 0. The Tray 1 Adjust Left Margin is set to +25. This adjusts the page image left margin for all pages printed from tray 1 by 25/300ths of an inch to the right of the margin specified in the IPDS job. Example 2 - Margins The - Lexmark MX822 | Card for IPDS: IPDS Emulation Users Guide 5th ed. - Page 43
PAPER ADJ MANUAL ENV ADJ Top Margin Left Margin x x x x x x x x x x x x x x x x x x Top Margin Back x x x x x x x x Left Margin Back x x x x x x x x Margin menu options will only appear when the printer option is installed or when the printer supports feeding the media. The - Lexmark MX822 | Card for IPDS: IPDS Emulation Users Guide 5th ed. - Page 44
Tray 2 Adjust Left Margin Top Margin Left Margin Back Top Margin Back Value 0*, -127 to 127 0*, -127 to 127 0*, -127 to 127 0*, -127 to 127 Function Performed Adjusts the page front side left margin for pages printed from tray 2. Adjusts the page front side top margin for pages printed from tray - Lexmark MX822 | Card for IPDS: IPDS Emulation Users Guide 5th ed. - Page 45
side left margin for pages printed from the MP feeder. Adjusts the duplex page back side top margin for pages printed from the MP feeder. 3.8.8 MANUAL PAPER ADJ This menu option allows additional adjustment to the top and left margins for simplex and duplex pages printed from the - Lexmark MX822 | Card for IPDS: IPDS Emulation Users Guide 5th ed. - Page 46
3.9 RESOURCE CAPTURE Menu Options The RESOURCE CAPTURE menu only displays Flash if only userflash is available or Disk if hard disk is installed in the printer. In the following an asterisk "*" indicates the default factory value. The selected value for each of these options can be printed; see - Lexmark MX822 | Card for IPDS: IPDS Emulation Users Guide 5th ed. - Page 47
3.9.3 Capture Data Objects This option selects whether or not to capture Data Objects from the data stream. Note that the storage media for capturing the Data Objects is selected in the Storage Media menu. Disable* No Data Objects will be captured. Data Objects already captured remain in the - Lexmark MX822 | Card for IPDS: IPDS Emulation Users Guide 5th ed. - Page 48
) correctly for duplex printing, any IPDS job received from the host, whether duplex or simplex, will print correctly on the paper. Refer to your printer manual for more information on the Paper Loading option and how to load preprinted paper for duplex printing. 48 - Lexmark MX822 | Card for IPDS: IPDS Emulation Users Guide 5th ed. - Page 49
Refer to your printer documentation for media size support of these functions. Finishing functions for all products: Function/ Support Hole Offset Punch Stacking Stapling Staple position Maximum Staple Packet Size* Center Fold Saddle Staple Lexmark CS82x Super In-Line In-Line Single 50 - Lexmark MX822 | Card for IPDS: IPDS Emulation Users Guide 5th ed. - Page 50
CS92x 1* or 2 Standard Bin or Output Bin 1 Lexmark CX92x * When installed, the Inner Finisher's output bin becomes the device's Standard Bin. The following examples assume that offset stacking is supported in Output Bin Value Y as specified in the above table. • Change the host output bin - Lexmark MX822 | Card for IPDS: IPDS Emulation Users Guide 5th ed. - Page 51
the host output bin selection number is 1.) This routes all jobs that would normally have gone to the printer standard bin to bin Y, which supports offset stacking. See MAP OUTPUT BINS Menu Options on page 39 for details on bin mapping. 5.1.2 Mainframe Offset Stacking For MVS JES2/JES3 offset - Lexmark MX822 | Card for IPDS: IPDS Emulation Users Guide 5th ed. - Page 52
. Check to see that all PTFs that affect stapling have been applied before calling for technical support. Finishing capabilities for optional finishers vary. Differences are explained below. 5.2.1.1 Lexmark CS820, CX820, CX825 and CX860 In-Line Stapler Finisher The In-Line Stapler (ILS) finisher - Lexmark MX822 | Card for IPDS: IPDS Emulation Users Guide 5th ed. - Page 53
Drawing of staple placement *DEVD *TOPLEFT Text Text text text text text text. Text shown with 0 degree rotation specified in IPDS job Short-edge fed paper, leading edge 53 - Lexmark MX822 | Card for IPDS: IPDS Emulation Users Guide 5th ed. - Page 54
5.2.1.2 Lexmark CX825 and CX860 Super Finisher Finisher The optional Super Finisher (SFin) supports Corner staple and Dual to read. Refer to your printer or finisher documentation to determine the finishing support and staple location for various paper sizes. Finishing functions may not be applied - Lexmark MX822 | Card for IPDS: IPDS Emulation Users Guide 5th ed. - Page 55
may cause an exception to be reported to the host. The "Reference edge offset". "Number of staples", and "Staple offsets" parameters are not supported. Drawing of staple placement *LEFT *DEVD Text Text Text text text text Text shown with 0 degree rotation specified in IPDS job Long-edge fed - Lexmark MX822 | Card for IPDS: IPDS Emulation Users Guide 5th ed. - Page 56
5.2.1.3 Lexmark MS82x, MX82x and MX62x Optional Finisher The optional finisher supports only one staple position. You can to read. Refer to your printer or finisher documentation to determine the finishing support and staple location for various paper sizes. Finishing functions may not be applied to - Lexmark MX822 | Card for IPDS: IPDS Emulation Users Guide 5th ed. - Page 57
CS92x and Lexmark CX92x Optional Standard Finisher The optional 2-Bin Floor Finisher supports Corner staple and Dual staple to read. Refer to your printer or finisher documentation to determine the finishing support and staple location for various paper sizes. Finishing functions may not be applied - Lexmark MX822 | Card for IPDS: IPDS Emulation Users Guide 5th ed. - Page 58
may cause an exception to be reported to the host. The "Reference edge offset". "Number of staples", and "Staple offsets" parameters are not supported. Drawing of staple placement *LEFT *DEVD Text Text Text text text text Text shown with 0 degree rotation specified in IPDS job Long-edge fed - Lexmark MX822 | Card for IPDS: IPDS Emulation Users Guide 5th ed. - Page 59
CS92x and Lexmark CX92x Optional Advanced Finisher Functions The 3-Bin Floor Finisher supports Corner staple, Dual staple (IPDS paper sizes. Refer to your printer or finisher documentation to determine the finishing support and staple location for various paper sizes. The Printer device type must - Lexmark MX822 | Card for IPDS: IPDS Emulation Users Guide 5th ed. - Page 60
being sent. 5.3.1.1 Lexmark CS820, CX820, CX825 and CX860In-Line Stapler Finisher The In-Line Stapler (ILS) finisher supports only one staple position and PSF for zOS (v. 3.4, 4.1 and 4.2). (See PSF OS/390 Users Guide for other Form Definitions Supplied with PSF, for Staple with Duplex, Tumble etc.) - Lexmark MX822 | Card for IPDS: IPDS Emulation Users Guide 5th ed. - Page 61
in IPDS job Text Text text text text text text. FC0010 Short-edge fed paper, leading edge 5.3.1.3 Lexmark MS82x, MX82x and MX62x Optional Finisher The optional finisher supports only one staple position. You can not physically change the position of the staple. The printer automatically rotates - Lexmark MX822 | Card for IPDS: IPDS Emulation Users Guide 5th ed. - Page 62
and PSF for zOS (v. 3.4, 4.1 and 4.2). (See PSF OS/390 Users Guide for other Form Definitions Supplied with PSF, for Staple with Duplex, Tumble etc.) paper, leading edge 5.3.1.4 Lexmark CS92x and CX92x Optional Standard Finisher The optional 2-Bin finisher supports Corner staple and Dual staple - Lexmark MX822 | Card for IPDS: IPDS Emulation Users Guide 5th ed. - Page 63
in IPDS job Text Text text text text text text. FC0010 Short-edge fed paper, leading edge 5.3.1.5 Lexmark CS92x and CX92x Optional Advanced Finisher Functions The 3-Bin Floor Finisher supports Corner staple, Dual staple (IPDS Edge stitch with 2 staples), Center Fold (IPDS Center Fold-in), and - Lexmark MX822 | Card for IPDS: IPDS Emulation Users Guide 5th ed. - Page 64
stitch-in has a higher priority than the bin selection, offset, and hole punch. These functions will be ignored when specified with Saddle stitch-in. The following is an example of a job output statement that includes the From Definition to perform Saddle stitch-in. //OUT1 OUTPUT CLASS=C,COPIES=1, - Lexmark MX822 | Card for IPDS: IPDS Emulation Users Guide 5th ed. - Page 65
jobs is available when an optional output bin with hole punch capability is installed. See the table on page 49 to determine if your finisher supports hole punching. A job may select hole punch by specifying it in an IPDS command. When hole punch is selected through an IPDS data stream command - Lexmark MX822 | Card for IPDS: IPDS Emulation Users Guide 5th ed. - Page 66
- To have selected pages stacked in an output bin hole punched (Default settings are assumed in this example. Check the finishing support tables on page 49 to determine the bins that support hole punch.) To have some pages punched and some pages not punched as they are stacked in the output option - Lexmark MX822 | Card for IPDS: IPDS Emulation Users Guide 5th ed. - Page 67
6 Color Management - User Files Color printers support a set of user files that can be loaded to a Table This ICC output profile is used if no instruction CMR exits or matches. The CMR profile in the job can also be ignored with the CMOCA option Instruction CC described on page 30. If no user - Lexmark MX822 | Card for IPDS: IPDS Emulation Users Guide 5th ed. - Page 68
index ccc mmm yyy kkk Index values can be from 1 to 16. ccc,mmm,yyy and kkk values can be from 0 to 255. Separators can be spaces or ",". The values must be decimal values. # indicates a comment line. It is recommended to add a comment line in the start of the file with a description of this mapping - Lexmark MX822 | Card for IPDS: IPDS Emulation Users Guide 5th ed. - Page 69
6.2.2 Delete a User File You can delete a file using the option described in section 3.4.13 Remove User Files on page 29. A user file will automatically be deleted if you load a new file of the same type. This is regardless of the name of the files. 69 - Lexmark MX822 | Card for IPDS: IPDS Emulation Users Guide 5th ed. - Page 70
7 IPDS Job Cancel 7.1 Canceling IPDS Jobs IPDS jobs may be cancelled using the normal cancel sequence for the printer. Cancel Job while an IPDS job is being processed causes an "IPDS cancel exception" to be sent to the host. The host responds by placing the first non-completed IPDS job in a held - Lexmark MX822 | Card for IPDS: IPDS Emulation Users Guide 5th ed. - Page 71
8 Working with Captured Resources 8.1 Capture Resource and Remove Resources Capture is a function whereby downloaded resources can be stored on disk or user flash. The flash memory and hard disk may be printer optional storage media ordered separately from the printer. Menu path: Settings > IPDS - Lexmark MX822 | Card for IPDS: IPDS Emulation Users Guide 5th ed. - Page 72
PSF/400 V4R2 or later is required for making fonts eligible for capture. All iSeries releases support font capture. 8.2.1.4 Making Bitmap LF1 and Outline LF3 font Fonts Eligible for Capture on about TrueType font capture, refer to the guide "Using OpenType Fonts in an AFP System" (G544-5876-00). 72 - Lexmark MX822 | Card for IPDS: IPDS Emulation Users Guide 5th ed. - Page 73
Number: 5655-B17) OS390/MVS 2.4 or later PFS for MVS 2.2 or later Note: Earlier releases may also support "Font Capture". For details - check your "PSF Customization Guide". There are basically 3 steps involved regarding font capture as follows: 1. Display current font marking status. 2. Mark fonts - Lexmark MX822 | Card for IPDS: IPDS Emulation Users Guide 5th ed. - Page 74
STEP 1. DISPLAY CURRENT FONT MARKING STATUS To determine the marking status of your host fonts you can run the APSRMARK report utility. The following is a sample of the JCL to run the font report listing. Sample JCL to run font report listing to determine current font marking status: //APSHORT JOB - Lexmark MX822 | Card for IPDS: IPDS Emulation Users Guide 5th ed. - Page 75
STEP1 EXEC PGM=APSRMARK //SYSPRINT DD SYSOUT=J //* //IN1 DD UNIT=3390,DSN=SYS1.FONT300,DISP=SHR,VOL=SER=OS3R7A //OUT1 DD UNIT=3390,DSN=SYS1.FONTNEW,DISP=SHR,VOL=SER=OS3R7A //SYSIN DD * INDD=IN1,OUTDD=OUT1,MEMBER=T1V10037,PUBLIC INDD=IN1,OUTDD=OUT1,MEMBER=C08400B0,PUBLIC /* Note: If you want to - Lexmark MX822 | Card for IPDS: IPDS Emulation Users Guide 5th ed. - Page 76
, this is not related to the Font capture flag available to AFP fonts. For detailed information about TrueType font capture, refer to the guide "Using OpenType Fonts in an AFP System" (G544-5876-00). 8.3 Preparing Data Objects (non-font resources) for Capture 8.3.1 Capturing Data Objects from an - Lexmark MX822 | Card for IPDS: IPDS Emulation Users Guide 5th ed. - Page 77
9 Remote Configuration of Printer IPDS Settings 9.1 Why Use a Browser Most IPDS emulation settings stored in the printer (the default IPDS settings) can be changed remotely using a browser. This method of changing settings is especially useful during printer installation to set all of the IPDS - Lexmark MX822 | Card for IPDS: IPDS Emulation Users Guide 5th ed. - Page 78
• Remove Resources - This operation is not shown. • Remove User Files - This operation is not shown. • IPDS Version - The current version is shown but cannot be changed. To operate these setting use the printer front panel menus. 78 - Lexmark MX822 | Card for IPDS: IPDS Emulation Users Guide 5th ed. - Page 79
10 Printer Messages and Problems Please refer to the IPDS Printer and Host Setup Guide for information on various problems and solutions. 79 - Lexmark MX822 | Card for IPDS: IPDS Emulation Users Guide 5th ed. - Page 80
of all page elements that effectively reduces the toner applied to each page. The lower the Toner Darkness setting, the lighter the printed result. printer. The following Negative Acknowledgment is returned by printers that support the XOA Print Quality Control command. Exception X'0292..02' - Lexmark MX822 | Card for IPDS: IPDS Emulation Users Guide 5th ed. - Page 81
004600 007017 007018 004064 007463 007465 Lexmark CS82x Lexmark CX820 Lexmark CX825 and CX860 Lexmark CS72x Lexmark CX72x Lexmark CS92x Lexmark CX92x Lexmark MS52x and MS62x Lexmark MX32x, MX42x and MX52x Lexmark MX62x Lexmark MS82x Lexmark MX72x Lexmark MX82x Product Identifier Self Defining - Lexmark MX822 | Card for IPDS: IPDS Emulation Users Guide 5th ed. - Page 82
CX860 Lexmark CS720 Lexmark CS725 Lexmark CX725 Lexmark CS921de Lexmark CS923de Lexmark CX921de Lexmark CX922de Lexmark CX923dte Lexmark CX923dxe Lexmark CX924dte Lexmark CX924dxe Lexmark MS521dn Lexmark MS621dn Lexmark MS622dn Lexmark MX321dn Lexmark MX421de Lexmark MX521de Lexmark MX522dhe Lexmark - Lexmark MX822 | Card for IPDS: IPDS Emulation Users Guide 5th ed. - Page 83
Description 0 - 1 2 - 3 4 - 7 Length of this self-defining field, including this field Finishing operation self-defining field ID Operation Type Values: Optional Finisher Supporting X'004' to X'008' X'0018' X'01': Corner staple X'03': Edge stitch X'08': Center fold-in X'12': Saddle stitch-in 83 - Lexmark MX822 | Card for IPDS: IPDS Emulation Users Guide 5th ed. - Page 84
of paper. This allows up to 8 pages to be printed per sheet. Default page placement (N-up) and explicit page placement (N-up EPP) are supported. Refer to the "Load Copy Control and Logical Page Position" command in the Intelligent Printer Data Stream Reference for more information. 11.5 Color and - Lexmark MX822 | Card for IPDS: IPDS Emulation Users Guide 5th ed. - Page 85
Area SDF is returned for each input source in a single XOH-OPC Acknowledgement Reply. The printer only reports media names for media sizes supported by the printer input sources. Below are tables showing common information returned in the replay and specific media IDs returned sorted by media names - Lexmark MX822 | Card for IPDS: IPDS Emulation Users Guide 5th ed. - Page 86
Media Name Media Type ID (Note 1) ISO A5 CO ISO B5 ENV JIS B4 JIS B5 LEDGER LEGAL LEGAL CO LEGAL 13 LETTER LETTER CO LETTER TR MON ENV STATEMNT ISO A5 colored 21 ISO B5 envelope 73 JIS B4 (257 x 364 mm) 42 JIS B5 (182 x 257 mm) 43 North American ledger (11 x 17 in) 69 North American - Lexmark MX822 | Card for IPDS: IPDS Emulation Users Guide 5th ed. - Page 87
12 Warranty The limited warranty you received with your printer gives warranty terms and conditions. For warranty information, refer to your printer documentation. 87 - Lexmark MX822 | Card for IPDS: IPDS Emulation Users Guide 5th ed. - Page 88
a resource) • Auto resolution scaling of fonts and IM images (240 to 300/600dpi) • One-dimensional barcodes support • 2D barcode support (PDF417, MaxiCode, DataMatrix, QR) • Advanced N-Up support • IPDS scalable (IO) and non-scalable (IM) images • Vector graphics • Overlays and page segments • OCA - Lexmark MX822 | Card for IPDS: IPDS Emulation Users Guide 5th ed. - Page 89
lists in Appendix B.5.1 on page 95, Appendix B.5.2 on page 96, and Appendix B.5.3 on page 96. Note that many of these languages are also supported by the Compatibility Font Sets Code Pages (see Appendix B.3 on page 91). B.1.2 Latin 2/ROECE, Latin 3, Latin 4, Latin 5 Latin 2/ROECE Albanian Czech - Lexmark MX822 | Card for IPDS: IPDS Emulation Users Guide 5th ed. - Page 90
Font Sets • The 4028 Compatibility Font Set emulates 300 dpi fonts. This font set is used by the Resident emulation. For details, including the supported code pages, see Appendix B.3.1, starting on page 91. • The 3812/3816 Compatibility Font Set emulates 240 dpi fonts. This font set is used by - Lexmark MX822 | Card for IPDS: IPDS Emulation Users Guide 5th ed. - Page 91
will use an equivalent scalable font. Most of these fonts support the Latin 1 languages. Typeface FGID OCR-B Courier 10 Prestige pt * 14 pt * 18 pt * 24 pt * 10 pt * 12 pt * 10 pt * 12 pt * Codepage support (CPGID or G-code) 893 (S), 877 (S) G2, 259 (S) G2, 259 (S) G2 892 (S), 876 (S) G2 310 (S) - Lexmark MX822 | Card for IPDS: IPDS Emulation Users Guide 5th ed. - Page 92
another font either at the host or in the printer using a font best-fit algorithm. Special Code Pages The following special code pages are supported when the Resident emulation is selected. Codepage (CPGID) 259 310 876 877 892 893 1002 GCSGID Language / Function / Description 340 963 968 969 968 - Lexmark MX822 | Card for IPDS: IPDS Emulation Users Guide 5th ed. - Page 93
PS PS PS 13.3 15.0 5.0 17.1 17.1 20.0 20.0 26.7 8 pt * 10 pt * 10 pt * 10 pt * 12 pt * 16 pt * 24 pt * Codepage support (CPGID) 893 (S) ** ** ** 892 (S) ** 290 (S) 293 (S 293 (S * = For these fonts the scalable Times New Roman Typefaces in the appropriate sizes from the Core Interchange Font - Lexmark MX822 | Card for IPDS: IPDS Emulation Users Guide 5th ed. - Page 94
Times New Roman Italic Medium Times New Roman Medium FGID 428 424 420 416 2307 2306 2305 2304 2309 2311 2310 2308 These fonts are supported through country or language extended code pages as defined in Appendix B.5, starting on page 95. To access the IBM Core Interchange Set, the FGIDs above - Lexmark MX822 | Card for IPDS: IPDS Emulation Users Guide 5th ed. - Page 95
B.5 IBM Core Interchange Font Set Code Page Support The code pages supported by the Core Interchange Font Set are listed below. A 697 695 697 695 697 697 697 697 695 697 695 697 695 The Euro symbol is supported in all code pages so marked. On the list of selectable default code pages on the operator - Lexmark MX822 | Card for IPDS: IPDS Emulation Users Guide 5th ed. - Page 96
B.5.2 Latin 1 EBCDIC Publishing Code Pages Latin 1 EBCDIC Publishing - Languages (and Countries) Belgian (Belgium) Brazilian Portuguese (Brazil) Canadian French (Canada (French)) Castilian Spanish (Spain, Philippines) Danish / Norwegian (Denmark, Norway) Finnish / Swedish (Sweden, Finland) French - Lexmark MX822 | Card for IPDS: IPDS Emulation Users Guide 5th ed. - Page 97
Latin 2, 3, 4, 5, and 9 Code Pages - Languages and/or Countries Latin 2 Multilingual Latin 2 Multilingual - with Euro Latin 2 Windows (ASCII) - with Euro Latin 3 Multilingual - incl. Turkish Latin 3 Multilingual PC (ASCII) Latin 4 Latin 4 ISO/ANSI - 8 bit ASCII Latin 5 - incl. Turkish Latin 5 ISO/ - Lexmark MX822 | Card for IPDS: IPDS Emulation Users Guide 5th ed. - Page 98
B.5.7 Arabic Code Pages Arabic Code Pages Arabic, Arabic Bilingual Arabic, Arabic Bilingual - with Euro (Arabic Eur) Arabic ISO/ASCII 8-bit Arabic ISO/ASCII 8-bit - with Euro Arabic Extended ISO/ASCII 8-bit - with Euro Arabic PC (ASCII) Arabic PC (ASCII) - with Euro GML List symbols Codepage (CPGID - Lexmark MX822 | Card for IPDS: IPDS Emulation Users Guide 5th ed. - Page 99
B.6 IBM Coordinated Font Set The IBM Coordinated Font Set is supported only in the following Code Page sets: Latin 1 Country Extended Code Pages, Latin 1 EBCDIC Publishing Code Pages, Latin 1 ASCII, and Latin EBCDIC DCF code pages. - Lexmark MX822 | Card for IPDS: IPDS Emulation Users Guide 5th ed. - Page 100
B.7 POSTNET Font Support The IPDS Emulation supports generation of the POSTNET bar code in the IPDS Bar Code tower. In addition, the following FGID may be used to generate a POSTNET bar code. - Lexmark MX822 | Card for IPDS: IPDS Emulation Users Guide 5th ed. - Page 101
Typestyle Times Roman Bold 12 pt Times Roman Bold 14 pt Times Roman Bold Italic 10 pt Times Roman Bold Italic 12 pt Times Roman Italic 12 pt b = Bold Original FGID 761 or 5707 80 fw 762 or 5707 93 fw 764 or 5835 67 fw 765 or 5835 80 fw 763 or 5815 80 fw Substituted FGID/Font Width 2309 80 fw - Lexmark MX822 | Card for IPDS: IPDS Emulation Users Guide 5th ed. - Page 102
Corporation United States Postal Service POSTal Numeric Encoding Technique (United States Postal Service) Royal Mail 4 The Standard Code 3 of 9 character set and Extended Code 3 of 9 character set are supported. Also known as Code 39. X'01' Print the bar code without a printer generated check digit - Lexmark MX822 | Card for IPDS: IPDS Emulation Users Guide 5th ed. - Page 103
Type Bar Code Type Mod X'04' Description The first check digit is generated using the NCR modulo-11 algorithm, the second using the IBM modulo-10 algorithm. The first check digit equals the remainder; error (exception condition EC-0E00) exists if the first check-digit calculation results in a - Lexmark MX822 | Card for IPDS: IPDS Emulation Users Guide 5th ed. - Page 104
Type Bar Code Type (BCD1) Mod Description digits are left-odd or left-even parity, with the parity determined by the digit combination. X'01' The two-digit UPC supplemental bar code symbol is preceded by a UPC Version A, Number System 0, bar code symbol. The bar code object contains both the UPC - Lexmark MX822 | Card for IPDS: IPDS Emulation Users Guide 5th ed. - Page 105
Type Bar Code Type Mod Description and the five-digit supplemental data. The bar code object processor generates the six-digit UPC Version E symbol and check digit. The check digit is used to determine the parity pattern of the Version E symbol. The five-digit supplemental bar code symbol is - Lexmark MX822 | Card for IPDS: IPDS Emulation Users Guide 5th ed. - Page 106
the input data. X'05' This is a bar code that is defined in "BARCODE, CONTAINER, INTELLIGENT MAIL" (USPS-B-3215) published by the United States Postal Service (USPS). The bar code uses a special form of the GS1-128 symbol that is defined in "GS1 General specifications" published by GS1. Refer to - Lexmark MX822 | Card for IPDS: IPDS Emulation Users Guide 5th ed. - Page 107
of POSTNET; tall bars are swapped with short bars. X'1A' RM4SCC (Royal Mail 4-State Customer Code) A 4-state customer code defined by the Royal Mail Postal service of England for use in bar coding postal code information. This symbology is also called the Royal Mail bar code or the 4State customer - Lexmark MX822 | Card for IPDS: IPDS Emulation Users Guide 5th ed. - Page 108
Prefix, Outward Code, Inward Code and Delivery Point Suffix). X'1B' Japan Postal Bar Code A bar code symbology defined by the Japanese Postal Service for use in bar coding postal code information. X'00' Print a Japan Postal Bar Code symbol with a start character, checksum character and stop - Lexmark MX822 | Card for IPDS: IPDS Emulation Users Guide 5th ed. - Page 109
code = 45). 8-digits (0-9) number representing the Sorting Code. X'21' Code 93 The Standard Code 93 character set and Extended Code 93 character set are supported. X'00' Generate check digit and print it with the bar code. X'22' USPS Four-State Also referred to as OneCodeSOLUTION bar code. X'00 - Lexmark MX822 | Card for IPDS: IPDS Emulation Users Guide 5th ed. - Page 110
C.1 Intelligent Mail Container Barcode Data Field Ranges This table refers to the Code 128 Type X'11' modifier X'05'. Field name Function 1 Symbol Character Application Identifier Type Indicator Mailer ID Serial Number Source USPS assigned USPS assigned USPS assigned USPS assigned Mailer assigned - Lexmark MX822 | Card for IPDS: IPDS Emulation Users Guide 5th ed. - Page 111
matrix symbologies) allow large amounts of data to be encoded in a small area. The information is represented in a two-dimensional matrix. The printer supports four 2-D bar code symbologies as shown in the table below. Column Labels: Code = Value for Bar Code Type (Bar Code Symbol Descriptor - Lexmark MX822 | Card for IPDS: IPDS Emulation Users Guide 5th ed. - Page 112
ID First Byte File ID Second Byte UCC/EAN FNC1 Industry FNC1 Reader Programming HDR/TRL Macro Supported Values B'0', B'1' B'0', B'1' X'0000', See table below for supported row sizes. X'0000', See table below for supported number of rows. X'00' - X'10' X'00', X'02' - X'10' X'01' - X'FE' X'01' - X'FE - Lexmark MX822 | Card for IPDS: IPDS Emulation Users Guide 5th ed. - Page 113
in BCOCA Reference Version 4. D.4 QR Code (Quick Response Code) These values are found in the Bar Code Symbol Data. A description of the supported values may be found in the "Bar Code Object Content Architecture (BCOCA) Reference". Offset Byte 5 Bit 0 Byte 5 Bit 1 Byte 6 Byte 7 Byte 8 Byte - Lexmark MX822 | Card for IPDS: IPDS Emulation Users Guide 5th ed. - Page 114
Byte 12 Bit 0 UCC/EAN FNC1: If this flag is B'1', this QR Code symbol will indicate that it conforms to the UCC/EAN application identifiers standard. Byte 12 Bit 1 must be B'0'. Byte 12 Bit 1 Industry FNC1 If this flag is B'1', this QR Code symbol will indicate that it conforms to the specific - Lexmark MX822 | Card for IPDS: IPDS Emulation Users Guide 5th ed. - Page 115
. Select the following settings to enable DBCS characters to print: 1. IPDS Emulation - Select the Resident emulation. The 3812/3816 emulation does not support DBCS printing. 2. Host Resolution - Select Auto or the resolution that matches the raster fonts stored on the host. If you need to use - Lexmark MX822 | Card for IPDS: IPDS Emulation Users Guide 5th ed. - Page 116
+ installed feature memory) is listed under the Device Information section on the print menu page (see Printing the Menu Settings Page on page 11.) Lexmark CS820, CX820, CX825, CX860 (standard 1GB for CS820; 2GB for CX820, CX825, CX860): IPDS print resolution 600 dpi / 1200 Image Q 600 dpi / 1200 - Lexmark MX822 | Card for IPDS: IPDS Emulation Users Guide 5th ed. - Page 117
Simplex and saving IPDS resources Duplex and saving IPDS resources DBCS, TrueType, Complex Jobs CMOCA Jobs Recommended optional memory 1GB 1GB 2GB 2GB Lexmark CS92x, CX92x (standard 1GB for CS92x; 2GB for CX92x): IPDS print resolution 600 dpi / 1200 Image Q 600 dpi / 1200 Image Q 600 dpi / 1200 - Lexmark MX822 | Card for IPDS: IPDS Emulation Users Guide 5th ed. - Page 118
Lexmark MS82x, MX72x, MX82x (standard 1GB for MS82x; 2GB for MX72x, MX82x): IPDS print resolution 600 dpi / 1200 Image Q 600 dpi / 1200 Image Q 600 dpi / 1200 - Lexmark MX822 | Card for IPDS: IPDS Emulation Users Guide 5th ed. - Page 119
Object Content Architecture Reference 102, 103, 104 Bar Code Object Content Architeture Reference 93 BCD1 subset 93 bin mapping See also finishing support bin selection numbers 38 default mapping 38 IPDS MENU > MAP OUTPUT BINS MENU 37 bin mapping number 37 browser-based remote configuration - Lexmark MX822 | Card for IPDS: IPDS Emulation Users Guide 5th ed. - Page 120
touch screen (MFPs) Coordinated Font Set 90 Coordinated Font Set 81 Coordinated Font Set Code Page Support........ 90 120 Core Interchange Font Set 81 Core Interchange Font Set Code Page Support 86 Core Interchange Resident Scalable Font Set .. 85 CPI - how to set default 19 credits 2 customer - Lexmark MX822 | Card for IPDS: IPDS Emulation Users Guide 5th ed. - Page 121
Version 25 Print IPDS Fonts 24 Printable Area 19 Toner Saver 17 envelopes feed direction 33 size 32 equipment Fin High Cap (bin mapping 38 Finishing Operations Self-Defining Field........ 74 finishing support 48 hole punch 57 hole punching 48 offset stacking 48, 49 stapling 51 stapling - Lexmark MX822 | Card for IPDS: IPDS Emulation Users Guide 5th ed. - Page 122
K KIX Postal Bar Code 98 L lost IPDS Resources 23 M Mainframe font capturing 65 offset stacking (finishing support 50 stapling (finishing support 55 MANUAL ENV ADJ (IPDS MENU > MARGINS 43 MANUAL PAPER ADJ (IPDS MENU > MARGINS 43 MAP INPUT TRAYS menu 34 MAP OUTPUT BINS menu 37 MARGINS Menu - Lexmark MX822 | Card for IPDS: IPDS Emulation Users Guide 5th ed. - Page 123
71 printer problems 71 printer setup options 10 printers supported 7 product support (customer or technical 8 supported printers 7 system requirements 7 T timeout printer IPDS Timeout and Host Timer or Host Timeout 22 Toner troubleshooting 71 TrueType fonts 75 U undefined characters - Lexmark MX822 | Card for IPDS: IPDS Emulation Users Guide 5th ed. - Page 124
UNIVERSAL SIZE (IPDS MENU > PAPER HANDLING 31 UPC Universal Product Code, US (bar code) ....... 93 UPC 2-Character (2-Digit) Supplemental (Periodicals) (bar code 94 UPC 5-Character Supplemental (Paperbacks) (bar code 95 UPC/CGPC Version A (bar code 94 UPC/CGPC Version E (bar code 94 UPC/CGPC
Lexmark
Card for IPDS (Emulation)
User’s Guide
Printers
Multifunction Products
•
Lexmark CS82x
•
Lexmark CS72x
•
Lexmark CS92x
•
Lexmark MS52x
•
Lexmark MS62x
•
Lexmark MS82x
•
Lexmark CX82x
•
Lexmark CX860
•
Lexmark CX72x
•
Lexmark CX92x
•
Lexmark MX32x
•
Lexmark MX42x
•
Lexmark MX52x
•
Lexmark MX62x
•
Lexmark MX72x
•
Lexmark MX82x