Lexmark MX910 Fax Guide

Fax Guide

Sending a fax using the control panel

1

Load an original document into the ADF tray or on the scanner glass.

2

From the home screen, touch

Fax

, and then enter the fax number.

Notes:

•

You can also enter the recipient using the shortcut number or address book.

•

To add recipients, touch

Next number

.

3

Touch

Fax It

.

Understanding the fax options

Resolution

This option lets you adjust the quality of the fax output. Increasing the image resolution increases the file size and the time

needed to scan your original document. Decreasing the image resolution reduces the file size.

Select one of the following:

•

Standard

—Use this when faxing most documents.

•

Fine 200 dpi

—Use this when faxing documents with small prints.

•

Super fine 300 dpi

—Use this when faxing documents with fine details.

•

Ultra fine 600 dpi

—Use this when faxing documents with pictures or photos.

Darkness

This option lets you adjust how light or dark the faxes are in relation to the original document.

Page Setup

This option lets you change the following settings:

•

Sides (Duplex)

—This specifies if the original document is printed on one side or on both sides of the page (duplex). This also

identifies what needs to be scanned for inclusion in the fax.

•

Orientation

—This specifies the orientation of the original document, and then changes the Sides (Duplex) and Binding settings

to match the orientation.

•

Binding

—This specifies if the original document is bound on the long

‑

edge or short

‑

edge side.

Content

This option lets you specify the content type and source of the original document.

Delayed Send

This option lets you send a fax at a later time or date.

Fax Guide

Page 1 of 2