Lexmark T656 Quick Reference

Lexmark T656 Manual

Get Lexmark T656 PDF manuals and user guides View all Lexmark T656 manuals
Add to My Manuals
Save this manual to your list of manuals

Lexmark T656 manual content summary:

  • Lexmark T656 | Quick Reference - Page 1
    change the Paper Type setting for the tray from touch screen. Clearing jams 200 and 201 paper jams 1 Lower the multipurpose feeder door, and then push the release latch to open the front cover. 2 Lift and pull the print cartridge out of the printer. 1 Warning-Potential Damage: Do not touch the
  • Lexmark T656 | Quick Reference - Page 2
    - Caring for and maintaining the printer The latest comprehensive User's Guide is available on our Web site at www.lexmark.com/publications. • Check the Lexmark Support Web site-support.lexmark.com -for: - E-mail support - Live chat support - Telephone support numbers and hours of operation for
  • 1
  • 2
Quick Reference
Loading paper
Loading paper
1
Squeeze the width guide tab inward and move it to fit the
paper size being loaded.
2
Unlock the length guide, squeeze the length guide tab inward,
and slide it to fit the paper size being loaded.
3
Flex, fan, and straighten the paper stack.
4
Load the paper.
Note:
The maximum fill line. Do not overload the tray.
5
If a different paper type was loaded, then change the Paper
Type setting for the tray from touch screen.
Clearing jams
200 and 201 paper jams
1
Lower the multipurpose feeder door, and then push the
release latch to open the front cover.
2
Lift and pull the print cartridge out of the printer.
Warning—Potential Damage:
Do not touch the
photoconductor drum on the underside of the cartridge. Use
the cartridge handle whenever you are holding the cartridge.
3
Place the print cartridge aside on a flat, smooth surface.
Warning—Potential Damage:
Do not leave the cartridge
exposed to light for extended periods.
Warning—Potential Damage:
The jammed paper may be
covered with unfused toner which can stain garments and
skin.
4
Remove the jammed paper.
CAUTION—HOT SURFACE:
The inside of the printer
might be hot. To reduce the risk of injury from a hot
component, allow the surface to cool before touching.
Note:
If the paper is not easy to remove, then open the rear
door and remove the paper from there.
5
Align and reinstall the print cartridge.
6
Close the front cover.
7
Close the multipurpose feeder door.
8
Touch
Continue
.
202 and 203 paper jams
Touch
Status/Supplies
to identify the location of the jam. If the
paper is exiting the printer, then pull the paper out, and then touch
Continue
.
1