LiftMaster CAPCELL CAPCELL QuickStart Guide
LiftMaster CAPCELL Manual
 |
View all LiftMaster CAPCELL manuals
Add to My Manuals
Save this manual to your list of manuals |
LiftMaster CAPCELL manual content summary:
- LiftMaster CAPCELL | CAPCELL QuickStart Guide - Page 1
CUSTOMER CARE AT 800-323-2276 TO SETUP AN ACCOUNT. CAPCELL QUICK START GUIDE SETUP 1. CONFIRM CELL SIGNAL Confirm a consistent cell signal at the installation site with the desired behavior. LiftMaster recommends: AT&T, Verizon, T-Mobile; and Bell, Rogers, and Telus in Canada. INSTALL - LiftMaster CAPCELL | CAPCELL QuickStart Guide - Page 2
CAPCELL SI VOUS N'AVEZ PAS ACCÈS À LIFTMASTER CLOUD, APPELEZ LE SERVICE À LA CLIENTÈLE LIFTMASTER AU 800 323-2276 POUR OUVRIR UN COMPTE. CONFIGURATION GUIDE RAPIDE 1. CONFIRMER LE SIGNAL CELLULAIRE Confirmer un signal cellulaire constant au site de l'installation avec le comportement désiré.
-
1 -
2
 |
 |
1. CONFIRM CELL
SIGNAL
Confirm a consistent cell
signal at the installation site
with the desired behavior.
LiftMaster recommends:
AT&T, Verizon, T-Mobile; and
Bell, Rogers, and Telus in
Canada.
4. INSTALL CAPCELL
Install CAPCELL in a dry, indoor location or in a
NEMA 4 or better enclosure near the CAPXL or
CAP2D.
NOTE:
Do not install inside of CAPXL. Intermittent
unreliable connection will result.
7. CONFIRM PROPER OPERATION
Confirm proper operation with CAPXL and CAP2D, and confirm online status in
LiftMaster Cloud.
3. CONNECT ANTENNAS
Connect the 4G/LTE Primary and secondary antennas.
If using Wi-Fi, connect the primary and secondary Wi-Fi
antennas.
6. CONNECT TO CAPXL OR CAP2D
A) Wired connection:
Connect a Cat 5 or better cable with RJ-45 connectors from the
#1 LAN port on the CAPCELL to the LAN port on the CAPXL or
CAP2D. LAN LED will turn green when connection is active.
NOTE:
Cat 5 cable length must not exceed 325 feet (99 m).
The blue WAN port should not be used for CAPXL or CAP2D.
OR
B) Wi-Fi connection (CAPXL only):
From the CAPXL Admin mode, select the CAPCELL network and
enter the network password.
NOTE:
Wi-Fi network name is “LiftMaster###”, where ### is the
last three digits of the MAC address of the CAPCELL modem.
Default Wi-Fi password is “LM” followed by the MAC address
of the CAPCELL modem. The MAC Address is printed on the
carton and the bottom of the CAPCELL modem in the format,
XX:YY:ZZ:11:22:33. For example, the Wi-Fi password would be
“LMXXYYZZ112233”. The password is case sensitive.
2. SIGN UP FOR DATA PLAN
Bring the CAPCELL modem to the desired cellular
carrier store and ask for a data package.
CAPXL
recommended data plan/month: 3 GB or
more
CAP2D recommended data plan/month: 1 GB or
more
Insert SIM card into SIM Card Slot and connect
power.
When SIM is active, Power, Internet, and Wi-Fi
®
LEDs will be green.
NOTE:
Internet LED may take up to a minute to turn
green at CAPCELL power up.
5. CONNECT POWER
Connect Power using the
provided transformer.
QUICK START
GUIDE
CAPCELL
SETUP
INSTALL
CONFIRM
IF YOU DO NOT HAVE ACCESS TO
LIFTMASTER
CLOUD
PLEASE CALL
LIFTMASTER CUSTOMER CARE
AT
800-323-2276
TO SETUP AN ACCOUNT.
4G/LTE Primary
Wi-Fi
Primary
SIM Card Slot
Wi-Fi LED
Internet LED
Power LED
Wi-Fi Secondary
4G/LTE Secondary
Power
#1 LAN Port
WAN Port