LiftMaster EL25 EL25 - QUICK START KEYPAD PROGRAMMING Manual

LiftMaster EL25 Manual

Get LiftMaster EL25 PDF manuals and user guides View all LiftMaster EL25 manuals
Add to My Manuals
Save this manual to your list of manuals

LiftMaster EL25 manual content summary:

  • LiftMaster EL25 | EL25 - QUICK START KEYPAD PROGRAMMING Manual - Page 1
    Guide Telephone entry/access control system with a 25 directory code capacity This Quickstart Guide is intended to highlight some applications. These instructions are not intended to be comprehensive. Please consult the Keypad Programming Manual for complete information. © 2005 The Chamberlain
  • LiftMaster EL25 | EL25 - QUICK START KEYPAD PROGRAMMING Manual - Page 2
    Guide for Programming the EL25 Programming Number Description of Task Factory Setting Programming Procedure *** 0 1 2 3 4 5 6 7 9 10 11 12 13 14 15 16 Entering Programming Mode Exiting Programming Length 2 Digits 6 # (1 or 2) # Set Entry Code Length 4 Digits 7 # (3-9) # Enable/Disable
  • LiftMaster EL25 | EL25 - QUICK START KEYPAD PROGRAMMING Manual - Page 3
    Add a Basic Entry Code 50 # (entry code) # 51 Add/Edit a Full Function Entry Code 54 Change an Entry Code ONLY 51 # (entry code) # ( a Background, all other steps are Required To enter programming mode from the EL25: *** Press and the 6-Digit Password (2 short beeps will be heard)
  • LiftMaster EL25 | EL25 - QUICK START KEYPAD PROGRAMMING Manual - Page 4
    Setting No Device Assigned D1=Relay 1 D2=Relay 2 D3=Relay 3 D4=Relay 4 Programming Procedure 57 # (entry code) # 60 # (device 1-4) # (device type 0-2; 0 = no device, 1 = wiegand card reader or keypad, 2 = RF receiver) # (door 1-4) # 61 # (door 1-4) # (relays to activate 0000-1111) # Order of
  • LiftMaster EL25 | EL25 - QUICK START KEYPAD PROGRAMMING Manual - Page 5
    and/or Delete a Transmitter Configure "Door Held Open" Alarm Feature Configure "Door Forced Open" Alarm Feature Optional Steps Indicated with a Factory Setting Programming Procedure 85 # (lost or stolen card PIN code) # (facility code) # (card type, 26 or 30) # (new card PIN) # (new facility code
  • LiftMaster EL25 | EL25 - QUICK START KEYPAD PROGRAMMING Manual - Page 6
    Telephone Company Answering Service Set a Phone Number's Extension Delay Time Verify Multi-Unit Number Dial "0-9" First to Get an Outside Line Using a Automated Phone System Set Alternative Prefixes Factory Setting Disabled Enabled No No Delay Disabled Normal Programming EL25 Speaker Cycle Entry Codes
  • LiftMaster EL25 | EL25 - QUICK START KEYPAD PROGRAMMING Manual - Page 7
    in this Quickstart Guide) THIS guide will outline some programming for the EL25 from the keypad or local/remote DTMF (Touch-Tone) phone ONLY. For more information, refer to the Manuals and/or your installation dealer. Procedure Required to Program the EL25: 1 1, 2 or 3 digit # Programming Number
  • LiftMaster EL25 | EL25 - QUICK START KEYPAD PROGRAMMING Manual - Page 8
    the password to maintain the security of your system. 1 From the EL25 Keypad: 1 Press 2 Enter the (6) six-digit password. The default is six zeroes. The unit is now ready to accept programming instructions! 2 Short Beeps 2 From the Residence Telephone: 1 When you hear the dial tone, press 1A
  • LiftMaster EL25 | EL25 - QUICK START KEYPAD PROGRAMMING Manual - Page 9
    System Feedback / Responses (Beeps) The EL25 emits various audio tones to respond to input and to indicate certain conditions. Programming Single Unit Overview Programming Single Unit Overview Programming Responses: 2 Short Beeps: Programming step was valid. 3 Short Beeps: Programming 's keypad.
  • LiftMaster EL25 | EL25 - QUICK START KEYPAD PROGRAMMING Manual - Page 10
    Units Overview Programming Multiple Units Overview Programming Multiple Units Overview Up to seven (7) EL25s can be installed on a single telephone line. the unit number while programming from the unit's front keypad. * If you make an error during an entry, press the asterisk key ( ) to begin
  • LiftMaster EL25 | EL25 - QUICK START KEYPAD PROGRAMMING Manual - Page 11
    EL25 SetUp "Your Settings" EL25 SetUp "Your Settings" The EL25 comes preprogrammed with Factory Settings. When the unit is first installed, you DO NOT need to program each feature. Review the unit's factory settings before programming (see Quick Reference Guide transactions. The system will adjust
  • LiftMaster EL25 | EL25 - QUICK START KEYPAD PROGRAMMING Manual - Page 12
    programming. The Internal Keypad is ALWAYS Assigned to Door Number 1. What is a Relay? A relay is a device that reacts to an electric current to activate other devices. Allowing the EL25 activates the system's optional camera. The camera is wired to a closed circuit television (CCTV). A camera can be
  • LiftMaster EL25 | EL25 - QUICK START KEYPAD PROGRAMMING Manual - Page 13
    and/or refer to the installation manual for assistance. The EL25 can be equipped with Wiegand reader and radio frequency (RF) modules that allow your system to accommodate external access control devices such as a Wiegand-compatible card reader (keypad) and RF receiver. In order for the devices
  • LiftMaster EL25 | EL25 - QUICK START KEYPAD PROGRAMMING Manual - Page 14
    Mode (0-5). Then (#) 0 = Not Used 3 = CCTV - activates system's optional camera. 1 = Strike - controls a door/gate by unlocking/opening it. valid access code is used at an external access control device (Door), the EL25 can be set to activate one or more relays. Factory Settings: Door 1
  • LiftMaster EL25 | EL25 - QUICK START KEYPAD PROGRAMMING Manual - Page 15
    this guide, this completed chart will outline how your EL25 system will function. Sample: EL25 Controlling 1 Door (Page 16) Device Location Main Keypad ( Gate In EL25 Door 2 3 Strike Unlocks Pedestrian Gate Door 3 4 CCTV Activates Camera 10 sec. 10 sec. Sample: EL25 Controlling Multi-
  • LiftMaster EL25 | EL25 - QUICK START KEYPAD PROGRAMMING Manual - Page 16
    system has been wired is an important part of programming it. Write down your configuration. To help visualize it, draw a map of it below. If you're unsure of your setup, consult your dealer/installer for more information. EL25 SetUp "Your Settings" EL25 0 (Default Internal Keypad) Device 1 Device
  • LiftMaster EL25 | EL25 - QUICK START KEYPAD PROGRAMMING Manual - Page 17
    Siren for 10 sec. Relay 4 - CCTV Mode Activates Camera for 10 sec. Relay 1 - Strike Mode Unlocks Door for 10 sec. Relay 2 - Shunt Mode Bypasses/Signals Alarm for Maglock for 40 sec. REX Device (Exit) EL25 Main Keypad (Front Door) Device Main Keypad (REX) Exit Request Location Front Door Door No
  • LiftMaster EL25 | EL25 - QUICK START KEYPAD PROGRAMMING Manual - Page 18
    Door for 10 sec. Relay 2 - Strike Mode Unlocks Door for 10 sec. Wiegand Keypad (Exit) EL25 Main Keypad (Front Door) Relay 1 - Strike Mode Unlocks Door for 10 sec. Device Main Keypad Wiegand Keypad Wiegand Card Reader Wiegand Card Reader Location Front Door (Entrance) Front Door (Exit) Back
  • LiftMaster EL25 | EL25 - QUICK START KEYPAD PROGRAMMING Manual - Page 19
    Relay 3 - Unlocks Pedestrian Gate Card Reader (Pedestrian Gate) EL25 with optional CCTV Camera is always on. Car Exit Sensor Relay 1 - Opens Vehicular Gate Gate Operator (Vehicular Gate) Relay 2 - Turns on Light Device Main Keypad and (REX) Exit Request Wiegand Card Reader CCTV Location Driveway
  • LiftMaster EL25 | EL25 - QUICK START KEYPAD PROGRAMMING Manual - Page 20
    "Your Settings" Multi-Resident Complex This EL25 can control the property with a vehicular gate operator, access card or the unit's keypad. Residents can use programmed transmitters for the parking lot, access cards for the pool or a personal entry code for the main entrance. The main entrance
  • LiftMaster EL25 | EL25 - QUICK START KEYPAD PROGRAMMING Manual - Page 21
    a week). * If you make an error during an entry, press the asterisk key ( ) to begin again. code. Add a Basic Card: 80 This programming step allows you to add a card using active with the current system time and never deactivate, unlock all doors connected to the EL25, with no time constraint
  • LiftMaster EL25 | EL25 - QUICK START KEYPAD PROGRAMMING Manual - Page 22
    need to perform the Program Number f9o0urfour times, activating each button separately. Add a Basic Transmitter: 90 Add a Basic transmitter to the system's database. A basic "2", ID number "4" and button "1". * If you make an error during an entry, press the asterisk key ( ) to begin again. Page 21
  • LiftMaster EL25 | EL25 - QUICK START KEYPAD PROGRAMMING Manual - Page 23
    - The EL25 can be programmed to "forward part of the encoded information that makes a card unique. Entry Code - Programmable, numeric codes (3-9 digits in length) that allow entry or exit through a gate/door. Residents enter their assigned entry code onto the unit's keypad to prompt the system
  • LiftMaster EL25 | EL25 - QUICK START KEYPAD PROGRAMMING Manual - Page 24
    Number - One part of the number sequence on a transmitter. M Manager - This person manages a complex and/or programs the system. N NPBI system - No Phone Bill Interface. Uses main phone line like a intercom system between EL25 and the resident phone. No monthly or per call telephone charges. PBX
  • LiftMaster EL25 | EL25 - QUICK START KEYPAD PROGRAMMING Manual - Page 25
    Appendix Access Cards Page 20 Direct Commands Page 8 Entry Codes Page 20 Programming - Enter Program Mode - Exit Program Mode - Multiple Units - Single Unit Page 7 Page 7 Page 9 Page 6 Quick Reference Guide Pages 1-5 System - Clock - Feedback/Responses - Password - Unit's ID Page 10
  • LiftMaster EL25 | EL25 - QUICK START KEYPAD PROGRAMMING Manual - Page 26
    114A3042 ® ™ 845 Larch Avenue Elmhurst, Illinois 60125-1196 © 2005 The Chamberlain Group, Inc. All Rights Reserved
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
Quickstart
EL25
Keypad Programming Guide
EL25
Keypad Programming Guide
Telephone entry/access control system with a 25 directory code capacity
®
™
© 2005 The Chamberlain Group, Inc.
All Rights Reserved
Quickstart
This Quickstart Guide is intended to highlight some applications. These instructions are not intended to be
comprehensive. Please consult the Keypad Programming Manual for complete information.