LiftMaster GSD GSD Manual

LiftMaster GSD Manual

Get LiftMaster GSD PDF manuals and user guides View all LiftMaster GSD manuals
Add to My Manuals
Save this manual to your list of manuals

LiftMaster GSD manual content summary:

  • LiftMaster GSD | GSD Manual - Page 1
    SLIDE DOOR OPERATOR MODELS SD & GSD ADDENDUM 2 YEAR W A R R A N T Y Serial # (located on electrical box cover) Installation Date Wiring Type NOT FOR RESIDENTIAL USE 41B6 LISTED DOOR OPERATOR
  • LiftMaster GSD | GSD Manual - Page 2
    1 Model GSD Single Slide Door Layout Manual Release *Fusible Link Cylindrical Weight 13.08" 4" Adjustable clearance for door movement between wall and operator. 7.5" Max. 6.0" Min. 13.00" Door Travel plus 4' - 3" 24.00" 24.00" 10.50" 20.53" Eye Bolt FIGURE 2 Model SD Bi-Part Slide Door
  • LiftMaster GSD | GSD Manual - Page 3
    locking. IMPORTANT This manual supplement includes only mechanical assembly instructions for your slide door operator. For complete list of operator features, specifications and wiring instructions, refer to the Owners Manual supplied with your operator. HARDWARE KITS KIT PART # *K77-10473 *K77
  • LiftMaster GSD | GSD Manual - Page 4
    slide door operator NOTE: For Bi-parting doors, slide secondary slider carriage securely. For a right to open single-sliding door, the powerhead should be mounted drive sprocket, up to the idler shaft and then back to the hole on the front of the carriage. 6. Using the two 10-32 x 1-1/4 inch screws
  • LiftMaster GSD | GSD Manual - Page 5
    (2 PER BRACKET) BI-PART SLIDER CARRIAGE (SEE FIGURE 2) SLIDER CARRIAGE (SEE FIGURE 1) POWERHEAD SERRATED FLANGE HEX NUT, #10 BI-PART SLIDER CARRIAGE HEX NUT, 3/8" (4 PER BRACKET) FLATWASHER, #10 (3 PER ASSEMBLY) FIGURE 5 SOCKET HEAD SCREW, 10-32 X 1-1/4" LONG (3PER ASSEMBLY) DRIVE CHAIN 5
  • LiftMaster GSD | GSD Manual - Page 6
    right of this line if the door slides right to close (see figure 1). NOTE: For bi-parting doors, omit this step. The track should extend 3-1/2 feet beyond the door opening (see figure 2). 3. Set the assembled operator into position and mark the holes for the angle mounting brackets on the wall, as
  • LiftMaster GSD | GSD Manual - Page 7
    , adjust spring on disconnect assembly by moving top shaft collar up or down. ELECTRICAL CONNECTIONS & OPERATING INSTRUCTIONS POWER AND CONTROL WIRING: Refer to the Owners Manual supplied with your operator for all power and control wiring. ELECTRICAL OPERATION: The door can be operated by means
  • LiftMaster GSD | GSD Manual - Page 8
    01-10589D c 1998, The Chamberlain Group, Inc. All rights Reserved
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
SLIDE DOOR OPERATOR
MODELS SD & GSD
ADDENDUM
NOT FOR RESIDENTIAL USE
LISTED
DOOR
OPERATOR
41B6
Serial #
(located on electrical box cover)
Installation Date
Wiring Type
2
YEAR
WARRANTY