LiftMaster HPH1MC Specifications EX3720

LiftMaster HPH1MC Manual

Get LiftMaster HPH1MC PDF manuals and user guides View all LiftMaster HPH1MC manuals
Add to My Manuals
Save this manual to your list of manuals

LiftMaster HPH1MC manual content summary:

  • LiftMaster HPH1MC | Specifications EX3720 - Page 1
    support 1.2 RELATED SECTIONS A. Section 05500 - Metal Fabrications: Steel frame and supports. operator. G. Section16150 - Wiring Connections: Electrical service to door operator. 1.3 REFERENCES A. ASCE to be used, including: 1. Preparation instructions and recommendations. 2. Installation methods. 3.
  • LiftMaster HPH1MC | Specifications EX3720 - Page 2
    B. Parts and Hardware Limited Warranty 1. Parts and Hardware: 1 Year 2. Springs: 2 Years or 50,000 cycles. PART 2 PRODUCTS 2.1 MANUFACTURERS A. Acceptable Manufacturers: 1. Clopay Corporation 2. Cookson 3. Cornell B. Substitutions not permitted: C. Requests for substitutions will be considered in
  • LiftMaster HPH1MC | Specifications EX3720 - Page 3
    hoist with integral manual operation protection circuit. 12. Cable Tension Monitor: Mitigates door operation when cable slackening occurs. 13. Internet connectivity: a. Built-in Wi-Fi with myQ technology. b. Over-the-air updates. 14. Service cycle count, lifetime cycle count, and remote diagnostics
  • LiftMaster HPH1MC | Specifications EX3720 - Page 4
    project conditions. 3.3 INSTALLATION A. Install overhead doors and track in accordance with approved shop drawings and the manufacturer's printed instructions. 3.4 PROTECTION A. Protect installed products until completion of project. B. Touch-up, repair or replace damaged products before Substantial
  • 1
  • 2
  • 3
  • 4
08360-1
SECTION 08360
OVERHEAD DOORS
PART
1 GENERAL
1.1
SECTION INCLUDES
A.
Extreme Series High Performance Door System.
1.
Polyurethane Insulated Steel Sectional Overhead Door.
2.
Electric door operator and controls
3.
Operating hardware tracks and support
1.2
RELATED SECTIONS
A.
Section 05500 - Metal Fabrications: Steel frame and supports.
B.
Section 06114 - Wood Blocking and Curbing: Rough wood framing and blocking for door opening.
C.
Section 07900 - Joint Seals: Perimeter sealant and backup materials.
D.
Section 08710 - Door Hardware: Cylinder locks.
E.
Section 09900 - Paints and Coatings: Field painting.
F.
Section 16130 - Raceway and Boxes: Empty conduit from control station to door operator.
G.
Section16150 - Wiring Connections: Electrical service to door operator.
1.3
REFERENCES
A.
ASCE 7 American Society of Civil Engineers, Minimum Design Loads for Buildings and Other Structures
B.
ANSI / DASMA 102; American National Standard specifications for sectional overhead type doors.
1.4
SUBMITTALS
A.
Submit under provisions of Section 01300.
B.
Manufacturer's data sheets on each product to be used, including:
1.
Preparation instructions and recommendations.
2.
Installation methods.
3.
Operation and maintenance data.
4.
Nameplate data and ratings for motors.
C.
Shop Drawings: Include opening dimensions and required tolerances, connection details, anchorage
spacing, hardware locations, and installation details.
D.
Manufacturer's Certificates: Certify products meet or exceed specified requirements.
1.5
WIND PERFORMANCE REQUIREMENTS
A.
Design doors to withstand positive and negative wind loads as calculated in accordance with
applicable building code and detailed in structural documents.
1.6
QUALITY ASSURANCE
A.
Manufacturer Qualifications: Company specializing in manufacturing the types of doors specified in this
section, with not less than ten years of documented experience.
B.
Installer Qualifications: Company specializing in installing the types of products specified in this section, with
minimum of five years of documented experience, and approved by the door manufacturer.
1.7
WARRANTY
A.
Finish Limited Warranty:
1.
Standard Paint – 10 Years
2.
Custom Color Option (Color Blast® Finish) – 5 years
3.
Delamination – 10 years