LiftMaster RGL-CTL Owners Manual - English French Spanish
LiftMaster RGL-CTL Manual
![]() |
View all LiftMaster RGL-CTL manuals
Add to My Manuals
Save this manual to your list of manuals |
LiftMaster RGL-CTL manual content summary:
- LiftMaster RGL-CTL | Owners Manual - English French Spanish - Page 1
screws tightened and use water tight compression fitting to meet environmental ratings. CARTON INVENTORY • Traffic Light • Cable (6.5 feet [2 m]) • Installation Instructions TRAFFIC LIGHT DIMENSIONS NEVER use this product as a sensing device for personal protection. Doing so could lead to SERIOUS - LiftMaster RGL-CTL | Owners Manual - English French Spanish - Page 2
INSTALLATION The Traffic Light should be mounted at a height which maximizes visibility. 1. Secure the Traffic Light to the mounting surface with appropriate hardware (not provided). 2. Insert the 4-pin connector into the base of the Traffic Light and turn the hold-down ring clockwise until snug. - LiftMaster RGL-CTL | Owners Manual - English French Spanish - Page 3
FEU DE CIRCULATION ROUGE/VERT À DEL DE HAUTE INTENSITÉ MODÈLE RGL-CTL INTRODUCTION Le feu de circulation rouge/vert à DEL de haute intensité LiftMaster est conçu pour des applications intérieures et extérieures où la signalisation et le contrôle de la circulation sont nécessaires. Le feu de - LiftMaster RGL-CTL | Owners Manual - English French Spanish - Page 4
INSTALLATION Le feu de circulation doit être monté à une hauteur qui maximise la visibilité. 1. Fixer le feu de circulation à la surface de montage avec la quincaillerie appropriée (non fournie). 2. Insérer le connecteur à 4 broches dans la base du feu de circulation et tourner l'anneau de retenue - LiftMaster RGL-CTL | Owners Manual - English French Spanish - Page 5
LUZ DE TRÁFICO LED ROJA/VERDE DE ALTA INTENSIDAD MODELO RGL-CTL INTRODUCCIÓN La luz de tráfico LED roja/verde de alta intensidad de LiftMaster está diseñada para utilizarse en aplicaciones en el interior y exterior en donde se requieran controles de señalización y tráfico. La luz de tráfico emite - LiftMaster RGL-CTL | Owners Manual - English French Spanish - Page 6
INSTALACIÓN La luz de tráfico debe montarse a una altura que maximice la visibilidad. 1. Asegure la luz de tráfico a la superficie de montaje con accesorios de montaje apropiados (no incluidos). 2. Introduzca el conector de 4 pines a la base de la luz de tráfico y gire el anillo de soporte en - LiftMaster RGL-CTL | Owners Manual - English French Spanish - Page 7
- LiftMaster RGL-CTL | Owners Manual - English French Spanish - Page 8
01-38893B © 2017, LiftMaster All Rights Reserved Tous droits réservés Todos los derechos reservados
![](/manual_guide/products/liftmaster-rglctl-owners-manual-english-french-spanish-2f1a228/1.png)
NEVER use this product as a sensing device for personal protection.
Doing so could lead to SERIOUS INJURY or DEATH.
To avoid SERIOUS personal INJURY or DEATH from electrocution,
disconnect electrical power to operator BEFORE proceeding.
ALL electrical connections MUST be made by a qualified individual.
•
Stop ALL traffic through the door BEFORE installing sensor.
•
Ensure there is no vehicle or pedestrian traffic through the door until
sensor is installed and tested for compliance with ALL applicable
safety standards (e.g. UL 325).
•
Check placement of wiring to ensure moving parts are NOT impeded
by wires.
•
Make sure wiring is correct BEFORE applying power to the sensor to
avoid DAMAGE to equipment.
•
If the sensor sustains damages (e.g falls), replace it with a new sensor.
HI-INTENSITY RED/GREEN
LED TRAFFIC LIGHT
MODEL RGL-CTL
INTRODUCTION
The LiftMaster Hi-Intensity Red/Green LED Traffic Light is designed for
use in both indoor and outdoor applications where signaling and traffic
control are required.
The Traffic Light puts out hi-intensity red and green
beams that are well suited to areas that require a controlled field of view
for narrow lane signaling and daylight visibility. The Traffic Light is
compatible with Logic 3/4/5.0 operators that can accommodate the
TLS1CARD and RDGRNCARD.
SPECIFICATIONS
FEATURE
DESCRIPTION
Supply Voltage And Current:
.............
15-30 volts, DC preferred,
AC acceptable
Voltage Draw
...............................
40 mA max. per LED color
(80mA Total Draw)
Input Response Time
......................
Indicator On/Off: 10 ms (max.)
Connections
.................................
Integral 4-Pin Connector
with Pig Tail
Operating Temperatures
..................
-40° to +50° C (-40° to +122° F)
Environmental Description
...............
Fully Encapsulated
ENVIRONMENTAL RATING
Electronics
..................................
IEC IP67
Enclosure
....................................
IEC IP65
ENCLOSURE MATERIAL
Front Cover
.................................
Polycarbonate
Back Cover
..................................
Polycarbonate
NOTE:
Outdoor wired models must have cover screws tightened and use
water tight compression fitting to meet environmental ratings.
TRAFFIC LIGHT DIMENSIONS
2.34"
(59.3 mm)
1.36"
(34.5 mm)
7.48"
(189.9 mm)
6.59"
(167.4 mm)
2.34"
(59.3 mm)
5.83"
(148.1 mm)
5.03"
(127.8 mm)
3.45"
(87.6 mm)
.79"
(20.1 mm)
1.73"
(43.8 mm)
2"
(50.7 mm)
RED
GREEN
CARTON INVENTORY
• Traffic Light
• Cable (6.5 feet [2 m])
• Installation Instructions
VIEWING ANGLE
The maximum light intensity of the Traffic Light is at approximately +10 ft. /
-10 ft. of the center line, and falling-off with the increase in distance. This
light is designed for narrow areas where single lane viewing is preferred.
NOTE:
Avoid looking directly into the powered LEDs from a close distance.
10 ft.
(3 m)
Center Line
Overhead view
10 ft.
(3 m)
WARNING:
This product can expose you to chemicals including
lead, which are known to the State of California to cause cancer
or birth defects or other reproductive harm. For more information
go to
www.P65Warnings.ca.gov