Linksys SLM248P Cisco Small Business SLM Smart Switches Installation Guide
Linksys SLM248P - Cisco - 10/100 Manual
UPC - 745883580354
View all Linksys SLM248P manuals
Add to My Manuals
Save this manual to your list of manuals |
Linksys SLM248P manual content summary:
- Linksys SLM248P | Cisco Small Business SLM Smart Switches Installation Guide - Page 1
Quick Start Guide Cisco Small Business SLM2048, SLM2024, SLM248G, SLM248P, SLM224G, SLM224P Smart Switch Package Contents • Smart Switch • Power Cord • Rubber feet • Quick Start Guide • Mounting Hardware • Product CD-ROM - Linksys SLM248P | Cisco Small Business SLM Smart Switches Installation Guide - Page 2
to the core network. • The SLM224G, SLM224P, SLM248G, and SLM248P offer twenty four (24) or forty eight (48) 10/100 copper ports, with two (2) shared gigabit copper or optical (SFP) uplink interfaces for connecting the switch to the core network. This guide describes how to physically install your - Linksys SLM248P | Cisco Small Business SLM Smart Switches Installation Guide - Page 3
on the non-PoE ports: • SLM224P ports 7-12, and 19-24 • SLM248P ports 13-24, and 37-48 Gigabit - (G1-G2) (Amber) Lights up to indicate a functional 1000 Mbps connection on the corresponding port (G1-G2) with an attached device. 2 Cisco Small Business SLM Series Smart Switch Installation Guide - Linksys SLM248P | Cisco Small Business SLM Smart Switches Installation Guide - Page 4
ten seconds to reset the switch's settings to the factory defaults. Ethernet (1-24 or 1-48) The switch is equipped with 24 or 48 autosensing, Ethernet ports, which use RJ-45 connectors. The Fast Ethernet ports support network speeds of 10 Mbps or 100 Mbps. They can operate Cisco Small Business SLM - Linksys SLM248P | Cisco Small Business SLM Smart Switches Installation Guide - Page 5
of the device connected to it (10 Mbps or 100 Mbps), and adjust its speed and duplex mode accordingly. miniGBIC - (1-2) The miniGBIC (gigabit interface converter) port is a connection point for a miniGBIC expansion module, so the switch can be uplinked to another switch by using a fiber optical link - Linksys SLM248P | Cisco Small Business SLM Smart Switches Installation Guide - Page 6
restrictions mentioned above. • Connect the switch to network devices according to the installation instructions below in section 4, "Connecting the Equipment". Rack Mounting You can mount the switch in any standard size, 19-inch (about 48 cm) wide rack. The switch requires 1 rack unit (RU) of - Linksys SLM248P | Cisco Small Business SLM Smart Switches Installation Guide - Page 7
your switch, perform the following: STEP 1 Connect a computer to an available LAN port. STEP 2 Start a web browser. STEP 3 In the address bar, enter the default IP address of the switch, http://192.168.1.254 and press Enter. 6 Cisco Small Business SLM Series Smart Switch Installation Guide - Linksys SLM248P | Cisco Small Business SLM Smart Switches Installation Guide - Page 8
to an available LAN port and verify that you can connect to a website on the Internet, such as www.cisco.com. If you encounter problems, consider the following: • Reset the switch to its factory default settings by holding down the reset button for 10 seconds. • Set a temporary IP address on an - Linksys SLM248P | Cisco Small Business SLM Smart Switches Installation Guide - Page 9
Business SLM Smart Switch Administration Guide. This is the starting point for detailed configuration of the switch. • Change the default password of the switch to protect it from unauthorized access. • Visit the software downloads area at http://tools.cisco.com/support/ downloads and navigate to - Linksys SLM248P | Cisco Small Business SLM Smart Switches Installation Guide - Page 10
en/US/support/tsd_cisco_ small_business_support_center_contacts.html Software Downloads (Login Required) Go to tools.cisco.com/support/downloads, and enter the model number in the Software Search box. Product Documentation Cisco Small Business SLM Series Smart Switch Documentation www.cisco.com - Linksys SLM248P | Cisco Small Business SLM Smart Switches Installation Guide - Page 11
10 Cisco Small Business SLM Series Smart Switch Installation Guide - Linksys SLM248P | Cisco Small Business SLM Smart Switches Installation Guide - Page 12
West Tasman Drive San Jose, CA 95134-1706 USA http://www.cisco.com Tel: 408 526-4000 800 553-NETS (6387) Fax: 408 527-0883 Cisco, Cisco Systems, the Cisco logo, and the Cisco Systems logo are registered trademarks or trademarks of Cisco Systems, Inc. and/or its affiliates in the United States and
Quick Start Guide
Cisco Small Business
SLM2048, SLM2024, SLM248G, SLM248P, SLM224G,
SLM224P
Smart Switch
Package Contents
•
Smart Switch
•
Power Cord
•
Rubber feet
•
Quick Start Guide
•
Mounting Hardware
•
Product CD-ROM